summaryrefslogtreecommitdiff
path: root/cpu/mpc86xx
AgeCommit message (Collapse)Author
2008-02-18mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-02-14Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xxWolfgang Denk
Conflicts: common/cmd_reginfo.c Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-1485xx, 86xx: Determine I2C clock frequencies and store in global_dataTimur Tabi
Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx. Update the get_clocks() function in 85xx and 86xx to determine the I2C clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk. Signed-off-by: Timur Tabi <timur@freescale.com>
2008-02-14PPC: Use r2 instead of r29 as global data pointerWolfgang Denk
R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc will refuse to use load/store multiple insns; instead, it issues a list of simple load/store instructions upon function entry and exit, resulting in bigger code size, which in turn makes the build for a few boards fail. Use r2 instead. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-14ppc: Refactor cache routines, so there is only one common set.Rafal Jaworowski
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
2008-01-2486xx: Add reginfo commandBecky Bruce
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-2486xx: Remove old-style law setup codeBecky Bruce
This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-2486xx: Support new law setup method and convert mpc8641Becky Bruce
Adds the support code in cpu/mpc86xx for the new law setup code recently created fsl_law.c, and changes the MPC8641HPCN config to use this code. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-2486xx: Rearrange the sequence in start.SBecky Bruce
* split the BAT initialization so that only 2 BATs (for the boot page and stack) are programmed very early on. The rest are initialized later. * Move other BAT setup, ccsrbar setup, and law setup later in the code after translation has been enabled. These changes will facilitate the moving of law and BAT initialization to C code, and will aid with 36-bit physical addressing support. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-1086xx: Support 2GB DIMMsBecky Bruce
Configure the number of bits used to address the banks inside the SDRAM device. The default register value of 0 means 2 bits to address 4 banks. Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks. Signed-off-by: Becky Bruce <bgill@freescale.com>
2007-11-20Merge commit 'remotes/wd/master'Jon Loeliger
2007-11-18Fix compiler warnings for PPC systems. Update CHANGELOG.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-11-1686xx: Fix broken variable reference when #def DEBUGing.Jon Loeliger
Sometimes you can't reference the DDR2 controller variables. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-11-16make 8610 board use pixis resetJason Jin
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2007-11-07make 8610 board use pixis resetJason Jin
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2007-11-0786xx: Fix broken variable reference when #def DEBUGing.Jon Loeliger
Sometimes you can't reference the DDR2 controller variables. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-10-17Initial mpc8610hpcd cpu/, README and include/ files.Jon Loeliger
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-10-1686xx: Allow for fewer DDR slots per memory controller.Jon Loeliger
As a direct correlation exists between DDR DIMM slots and SPD EEPROM addresses used to configure them, use the individually defined SPD_EEPROM_ADDRESS* values to determine if a DDR DIMM slot should have its SPD configuration read or not. Effectively, this now allows for 1 or 2 DIMM slots per memory controller. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-09-15Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as globalWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-08-10cpu/86xx fixes.Jon Loeliger
Remove rev 1 fixes. Always set PICGCR_MODE. Enable machine check and provide board config option to set and handle SoC error interrupts. Include MSSSR0 in error message. Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-08-05Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.Ed Swarthout
All of the PCI/PCI-Express driver and initialization code that was in the MPC8641HPCN port has now been moved into the common drivers/fsl_pci_init.c. In a subsequent patch, this will be utilized by the 85xx ports as well. Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added. Also enable the second PCI-Express controller on 8641 by getting its BATS and CFG_ setup right. Fixed a u16 vendor compiler warning in AHCI driver too. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-08-01Fix build errors and warnings / code cleanup.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-07-05mpc86xx: Remove old CFG_CMD_* references.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-03cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger
This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-03Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk
2007-06-22[ppc] Fix build breakage for all non-4xx PowerPC variants.Rafal Jaworowski
- adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros - minor 4xx cleanup
2007-06-05mpc8641 image size cleanupEd Swarthout
e600 does not have a bootpg restriction. Move the version string to beginning of image at fff00000. Resetvec.S is not needed. Update flash copy instructions. Add tftpflash env variable Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-05-16Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECxKim Phillips
For all practical u-boot purposes, TSECs don't differ throughout the mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-05-01Conditionalize 8641 Rev1.0 MCM workaroundsJames Yang
Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-05-01Rewrote picos_to_clk() to avoid rounding errors.James Yang
Clarified that conversion is to DRAM clocks rather than platform clocks. Made function static to spd_sdram.c. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-04-20mpc86xx; Write MAC address to mac-address and local-mac-addressJon Loeliger
Some device trees have a mac-address property, some have local-mac-address, and some have both. To support all of these device trees, ftp_cpu_setup() should write the MAC address to mac-address and local-mac-address, if they exist. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-04-20mpc86xx: protect memcpy to bad address if a mac-address is missing from dtJon Loeliger
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-04-09Add PIXIS FPGA support for MPC8641HPCN board.Haiying Wang
Move the 8641HPCN's PIXIS code to the new directory board/freescale/common/ as it will be shared by future boards not in the same processor family. Write a "pixis_reset" command that utilizes the FPGA reset sequencer to support alternate soft-reset options such as using the "alternate" flash bank, enabling the watch dog, or choosing different CPU frequencies. Add documentation for the pixis_reset to README.mpc8641hpcn. Signed-off-by: Haiying Wang <haiying.wang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-03-22Set Rev 2.x 86xx PIC in mixed mode.Haiying Wang
Prevent false interrupt from hanging Linux as MSR[EE] is set to enable interrupts by changing the PIC out of the default pass through mode into mixed mode. Signed-off-by: Haiying Wang <haiying.wang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-03-22Add support for 8641 Rev 2 silicon.Ed Swarthout
Without this patch, I am unable to get to the prompt on rev 2 silicon. Only set ddrioovcr for rev1. Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-10-27MPC86xx: Cleaned up unused and conditionally used local variables.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-10-27Fix "ar" flags in some Makefiles to allow for silent "make -s"Wolfgang Denk
2006-10-24Code cleanupWolfgang Denk
2006-10-19Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.cJon Loeliger
in an effort to begin to unify the umpteen FSL I2C drivers that are all otherwise very similar. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-10-10Coding style changes to remove local varible blocksJon Loeliger
and reformat a bit nicer.
2006-10-10Fix whitespace issues.Jon Loeliger
2006-09-29Merge branch 'mpc86xx'Jon Loeliger
2006-09-29Fix missing tCycle/modfreq calculation.John Traill
Signed-off-by: John Traill <john.traill@freescale.com>
2006-09-19Modified makefile for new build mechanism.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-09-14Handle 86xx SVR values according to the new Reference Manual.Jon Loeliger
Both 8641 and 8641D have SVR == 0x8090, and are distinguished by the byte in bits 16-23 instead. Thanks to Jason Jin for noticing. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-08-29Remove trailing empty lines.Jon Loeliger
2006-08-29Remove bogus msync and use volatile asm.Jon Loeliger
2006-08-22General indent and whitespace cleanups.Jon Loeliger
2006-08-22Cleanup compiler warnings.Jon Loeliger
2006-08-17Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTRHaiying Wang
generated by cgit v0.10.2 at 2024-08-04 00:14:14 (GMT)