summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2016-12-05pci: mvebu: Add PCIe driver for Armada-8KShadi Ammouri
This patch adds a driver for the PCIe controller integrated in the Marvell Armada-8K SoC. This controller is based on the DesignWare IP core. The original version was written by Shadi and Yehuda. I ported this driver to the latest mainline U-Boot version with DM support. Tested on the Marvell DB-88F8040 Armada-8K eval board. Signed-off-by: Shadi Ammouri <shadi@marvell.com> Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
2016-12-03pci: sh7751: map PCI memory space into SDRAMVladimir Zapolskiy
For ease of use and accounting a condition that on SH4 pci_phys_to_bus() and pci_bus_to_phys() are one in one mappings due to unimplemented __iomem() conversion, this change fixes access to SDRAM memory by PCI devices. This change also generalizes PCI system memory configuration, which is taken from board specific defines rather than hardcoded in the PCI host driver. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-12-03pci: sh7751: fix up PCI I/O space addressVladimir Zapolskiy
The change actually maps PCI I/O window to the same address on PCI bus as it is stated by a comment, before the change transfers to the PCI I/O space are failed due to misconfiguration of the most significant 14 bits of the PCI address in PCIIOBR (note that it is set to 0x0). Most probably the problem remained unnoticed, because communcation to all tested PCI devices is done over PCI memory space only. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2016-10-28pci: Move CONFIG_PCI_PNP to KconfigBin Meng
Introduce CONFIG_PCI_PNP in Kconfig and move over boards' defconfig to use that. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Re-generate configs and include/configs/ changes] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-28drivers/pci/Kconfig: Add PCITom Rini
Add 'PCI' as a menu option and migrate all existing users. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2016-10-13libfdt: Sync fdt_for_each_subnode() with upstreamSimon Glass
The signature for this macro has changed. Bring in the upstream version and adjust U-Boot's usages to suit. Signed-off-by: Simon Glass <sjg@chromium.org> Update to drivers/power/pmic/palmas.c: Signed-off-by: Keerthy <j-keerthy@ti.com> Change-Id: I6cc9021339bfe686f9df21d61a1095ca2b3776e8
2016-10-12vbe: Make vbe_setup_video_priv() publicBin Meng
vbe_setup_video_priv() might be useful to other drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12dm: video: Output verbose information in vbe_setup_video()Bin Meng
With DM conversion, information like "Video: 1024x768x16" is not shown anymore. Now add these verbose output back. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11dm: video: Add driver-model support to vesa graphicsSimon Glass
Provide a function to run the Vesa BIOS for a given PCI device and obtain the resulting configuration (e.g. display size) for use by the video uclass. This makes it easier to write a video driver that uses vesa and supports driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-09-23treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-21pci: Flip condition for detecting non-PCI parent devicesPaul Burton
In pci_uclass_pre_probe an attempt is made to detect whether the parent of a device is a PCI device and that the device is thus a bridge. This was being done by checking whether the parent of the device is of the UCLASS_ROOT class. This causes problems if the PCI controller is a child of some other non-PCI node, for example a simple-bus node. For example, if the device tree contains something like the following then pci_uclass_pre_probe would incorrectly believe that the PCI controller is a bridge, with a PCI parent: / { some_child { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <>; pci_controller: pci@10000000 { compatible = "my-pci-controller"; device_type = "pci"; reg = <0x10000000 0x2000000>; }; }; }; Avoid this incorrect detection of bridges by instead checking whether the parent devices class is UCLASS_PCI and treating a device as a bridge when this is true, making use of device_is_on_pci_bus to perform this test. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-21pci: xilinx: Add a driver for Xilinx AXI to PCIe bridgePaul Burton
This patch adds a driver for the Xilinx AXI bridge for PCI express, an IP block which can be used on some generations of Xilinx FPGAs. This is mostly a case of implementing PCIe ECAM specification, but with some quirks about what devices are valid to access. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-15pci: tegra: port to standard clock/reset/pwr domain APIsStephen Warren
Tegra186 supports the new standard clock, reset, and power domain APIs. Older Tegra SoCs still use custom APIs. Enhance the Tegra PCIe driver so that it can operate with either set of APIs. On Tegra186, the BPMP handles all aspects of PCIe PHY (UPHY) programming. Consequently, this logic is disabled too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-07-28Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2016-07-28pci: allow disabling of pci init/enum via envTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-27dm: Use dm_scan_fdt_dev() directly where possibleSimon Glass
Quite a few places have a bind() method which just calls dm_scan_fdt_dev(). We may as well call dm_scan_fdt_dev() directly. Update the code to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27dm: Convert users from dm_scan_fdt_node() to dm_scan_fdt_dev()Simon Glass
This new function is more convenient for callers, and handles pre-relocation situations automatically. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-12pcie_imx: increment timeout for link upStefano Babic
On some boards, the current 20ms timeout is hit. Increase it to 40mS. Signed-off-by: Stefano Babic <sbabic@denx.de>
2016-07-12pci: Add board_ prefix to should_load_oprom() and make it weakBin Meng
For consistency with board_should_run_oprom(), do the same to should_load_oprom(). Board support codes can provide this one to override the default weak one. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-12pci: Make load_oprom and run_oprom independentBin Meng
At present should_load_oprom() calls board_should_run_oprom() to determine whether oprom should be loaded. But sometimes we just want to load oprom without running. Make them independent. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-12pci: Remove CONFIG_ALWAYS_LOAD_OPROMBin Meng
This option is defined at nowhere. Remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-05pci: tegra: actually program REFCLK_CFG* on recent SoCsStephen Warren
On recent SoCs, tegra_pcie_phy_enable() isn't called; but instead tegra_pcie_enable_controller() calls tegra_xusb_phy_enable(). However, part of tegra_pcie_phy_enable() needs to happen in all cases. Move that code to tegra_pcie_port_enable() instead. For reference, NVIDIA's downstream Linux kernel performs this operation in tegra_pcie_enable_rp_features(), which is called immediately after tegra_pcie_port_enable(). Since that function doesn't exist in the U-Boot driver, we'll just add it to the tail of tegra_pcie_port_enable() instead. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-07-05pci: tegra: correctly program PADS_REFCLK registersStephen Warren
The value that should be programmed into the PADS_REFCLK register varies per SoC. Fix the Tegra PCIe driver to program the correct values. Future SoCs will require different values in cfg0/1, so the two values are stored separately in the per-SoC data structures. For reference, the values are all documented in NV bug 1771116 comment 20. The Tegra210 value doesn't match the current TRM, but I've filed a bug to get the TRM fixed. Earlier TRMs don't document the value this register should contain, but the ASIC team has validated all these values, except for the Tegra20 value which is simply left unchanged in this patch. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-06-03pcie/layerscape: fix bug in bus number computation when setting msi-mapBogdan Purcareata
When multiple PCI cards are present in an ls2080a board, the second card does not get its msi-map set up properly due to a bug in computing the bus number. The bus number returned by PCI_BDF() is not the actual PCI bus number, but instead represents a global u-boot PCI bus number. A given bus number is relative to hose->first_busno, so that has to be subtracted from the PCI device id. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Acked-by: Stuart Yoder <stuart.yoder@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-17pci: Drop CONFIG_SYS_SCSI_SCAN_BUS_REVERSESimon Glass
This option is not used by any board. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-05-04pci: tegra: fix DM conversion issues on Tegra20Stephen Warren
Tegra20's PCIe controller has a couple of quirks. There are workarounds in the driver for these, but they don't work after the DM conversion: 1) The PCI_CLASS value is wrong in HW. This is worked around in pci_tegra_read_config() by patching up the value read from that register. Pre-DM, the PCIe core always read this via a 16-bit access to the 16-bit offset 0xa. With DM, 32-bit accesses are used, so we need to check for offset 0x8 instead. Mask the offset value back to 32-bit alignment to make this work in all cases. 2) Accessing devices other than dev 1 causes a data abort. Pre-DM, this was worked around in pci_skip_dev(), which the PCIe core code called during enumeration while iterating over a bus. The DM PCIe core doesn't use this function. Instead, enhance tegra_pcie_conf_address() to validate the bdf being accessed, and refuse to access invalid devices. Since pci_skip_dev() isn't used, delete it. I've also validated that both these WARs are only needed for Tegra20, by testing on Tegra30/Cardhu and Tegra124/Jetson TKx. So, compile them in conditionally. Fixes: e81ca88451cf ("dm: tegra: pci: Convert tegra boards to driver model for PCI") Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-04-25pci: Device scanning range fixYoshinori Sato
The terminal condition in the area where a PCI device is scanned is wrong, and 1f.7 isn't scanned. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-21pci/layerscape: set LUT and msi-map for discovered PCI devicesStuart Yoder
msi-map properties are used to tell an OS how PCI requester IDs are mapped to ARM SMMU stream IDs. for all PCI devices discovered in a system: -allocate a LUT (look-up-table) entry in that PCI controller -allocate a stream ID for the device -program and enable a LUT entry (maps PCI requester id to stream ID) -set the msi-map property on the controller reflecting the LUT mapping basic bus scanning loop/logic was taken from drivers/pci/pci.c pci_hose_scan_bus(). Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-21armv8: ls2080a: remove obsolete stream ID partitioning supportStuart Yoder
Remove stream ID partitioning support that has been made obsolete by upstream device tree bindings that specify how representing how PCI requester IDs are mapped to MSI specifiers and SMMU stream IDs. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-17pci: Correct a few comments and nitsSimon Glass
Two comments are missing a parameter and there is an extra blank line. Also two of the region access macros are misnamed. Correct these problems. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17pci: Add functions to update PCI configuration registersSimon Glass
It is common to read a config register value, clear and set some bits, then write back the updated value. Add functions to do this in one step, for convenience. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-14dm: pci: Break out the common region display codeSimon Glass
Each region is displayed in almost the same way. Break out this common code into its own function. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14dm: Use uclass_first_device_err() where it is usefulSimon Glass
Use this new function in places where it simplifies the code. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-26pci: Fix compiler warnings in dm_pciauto_setup_device()Bin Meng
Fix the following compiler warnings when DEBUG is on. warning: 'bar_res' may be used uninitialized in this function. drivers/pci/pci_auto.c:101:21: if (!enum_only && pciauto_region_allocate(bar_res, bar_size, ^ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-24pci_rom: fix may be used uninitialized warningAndreas Bießmann
Building pci_rom.c with my toolchain complains about may be used uninitialized rom varaible: ---8<--- +drivers/pci/pci_rom.c:269:25: note: 'rom' was declared here w+drivers/pci/pci_rom.c: In function 'dm_pci_run_vga_bios': w+drivers/pci/pci_rom.c:154:14: warning: 'rom' may be used uninitialized in this function [-Wmaybe-uninitialized] --->8--- Fix this as done in 55616b86c745fcac5a791268ab8e7cba36965c0f the ram variable. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-29Merge git://git.denx.de/u-boot-dmTom Rini
2016-01-29Implement "pci enum" command for CONFIG_DM_PCIStephen Warren
With CONFIG_DM_PCI enabled, PCI buses are not enumerated at boot, as they are without that config option enabled. No command exists to enumerate the PCI buses. Hence, unless some board-specific code causes PCI enumeration, PCI-based Ethernet devices are not detected, and network access is not available. This patch implements "pci enum" in the CONFIG_DM_PCI case, thus giving a mechanism whereby PCI can be enumerated. do_pci()'s handling of case 'e' is moved into a single location before the dev variable is assigned, in order to skip calculation of dev. The enum sub-command doesn't need the dev value, and skipping its calculation avoids an irrelevant error being printed. Using a command to initialize PCI like this has a disadvantage relative to enumerating PCI at boot. In particular, Ethernet devices are not probed during PCI enumeration, but only when used. This defers setting variables such as ethact, ethaddr, etc. until the first network-related command is executed. Hopefully this will not cause further issues. Perhaps in the long term, we need a "net start/enum" command too? Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-28Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
2016-01-28tegra: Report errors from PCI initSimon Glass
This function can fail, so be sure to report any errors that occur. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-24dm: pci: Convert bios_emu to use the driver model PCI APISimon Glass
At present this BIOS emulator uses a bus/device/function number. Change it to use a device if CONFIG_DM_PCI is enabled. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: pci: Avoid using pci_bus_to_hose() in the uclassSimon Glass
This function is only available for compatibility with old code. Avoid using it in the uclass. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: pci: Add a function to write a BARSimon Glass
Add a driver-model version of the pci_write_bar32 function so that this is supported in the new API. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: pci: Move pci_bus_to_hose() to compatibilitySimon Glass
This function should not be used by driver-model code, so move it to the compatibility portion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-19pci_rom.c: Fix may be used uninitialized warningTom Rini
With gcc-5.x we get: drivers/pci/pci_rom.c: In function 'dm_pci_run_vga_bios': drivers/pci/pci_rom.c:352:3: warning: 'ram' may be used uninitialized in this function [-Wmaybe-uninitialized] While unconvinced that this can happen in practice (if we malloc we set alloced to true, it will be false otherwise), silence the compiler. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-15dm: pci: Avoid a memory leak when allocating the ROMSimon Glass
Adjust pci_rom_load() to return an indication of whether it allocated memory or not. Adjust the caller to free it. This fixes a memory leak when PCI_VGA_RAM_IMAGE_START is not used. Reported-by: Coverity (CID: 134194) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-15dm: pci: Add a 'fall through' commentSimon Glass
For this class it is intended to set up the PCI device, so add a comment to indicate this. This avoids a coverity warning. Reported-by: Coverity (CID: 134194) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14drivers/pci/pci_mvebu: Fix for boards with X4 lanesPhil Sutter
Armada XP has support for X4 lanes, boards specify this in their serdes_cfg. During PEX init in high_speed_env_lib.c, the configuration is stored in GEN_PURP_RES_2_REG. When enumerating PEX, subsequent interfaces of an X4 lane must be skipped. Otherwise the enumeration hangs up the board. The way this is implemented here is not exactly beautiful, but it mimics how Marvell's BSP does it. Alternatively we could get the information using board_serdes_cfg_get(), but that won't lead to clean code, either. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14drivers/pci: Fix for debug builds without CONFIG_PCI_ENUM_ONLYPhil Sutter
The debug printing references bar_res, which exists only if CONFIG_PCI_ENUM_ONLY is not defined. Therefore move it into the ifdef'd area. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-12pci: Tidy up comments in pci_bind_bus_devices()Simon Glass
The current comments are confusing. We don't actually bind a generic device when the device tree has no information. We try to scan available PCI drivers. Update the comments to reflect this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-12dm: pci: Switch to DM API for PCI address mappingSimon Glass
We should use the new address mapping functions unless we are in compatibility mode. Disable the old functions by default. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>