summaryrefslogtreecommitdiff
path: root/drivers/power
AgeCommit message (Collapse)Author
2017-01-19Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-01-18pmic: pmic_mc34vr500: Add a driver for the mc34vr500 pmicHou Zhiqiang
This patch adds a simple pmic driver for the mc34vr500 pmic which is used in conjunction with the fsl T1 and LS1 series SoC. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-11power_i2c.c: Fix unused variable warningTom Rini
The variable ret was added but never set as we did not make calls to other functions that we needed to check the return value on. Fixes: 505cf4750ae5 ("power: change from meaningless value to error number") Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-11power: change from meaningless value to error numberJaehoon Chung
'-1' is absolutely meaningless value. This patch changed from meaningless value to error number. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-27regulator: fixed: Add support to handle enable-active-high DT propertyVignesh R
Add support to handle enable-active-high DT property. This property is used to drive the gpio controlling fixed regulator as active high when claiming gpio line. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-12-22power: pmic: add the max8998 controller for DMJaehoon Chung
Add the max8998 controller for Driver model. Samsung S5P series are using max8998 pmic controller. In future, it should be supported the regulator framework. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-12-04ARM: OMAP4+: Add support for getting pbias info from boardLokesh Vutla
Palmas driver assumes it is always TPS659xx regulator on all DRA7xx based boards to enable mmc regulator. This is not true always like in case of DRA71x-evm. So get this information based on the board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Delete omap4_vmmc_pbias_config from omap_hsmmc.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-12-03ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XXNishanth Menon
CONFIG_AM57XX is just an unnecessary macro that is redundant given So, remove the same instead of spreading through out the u-boot source code and getting in the way to maintain common code for DRA7x family. Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-26power: regulator: Add limits checking while setting currentKeerthy
Currently the specific set ops functions are directly called without any check for min/max current limits for a regulator. Check for them and proceed. Signed-off-by: Keerthy <j-keerthy@ti.com> Fixed checking of current limits: Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-26power: regulator: Add limits checking while setting voltageKeerthy
Currently the specific set ops functions are directly called without any check for voltage limits for a regulator. Check for them and proceed. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Fixed checking of voltate limits: Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25power: regulator: Introduce regulator_set_value_force functionKeerthy
In case we want to force a particular value on a regulator irrespective of the min/max constraints for testing purposes one can call regulator_set_value_force function. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-24power: twl6030: fix code refactoringNicolae Rosia
Commit a85362fb3e1fc7833723accddbbae431091d06b8 refactored the code but the register read ended up in the wrong if branch. Currently, the else branch checks a variable which is always 0. Signed-off-by: Nicolae Rosia <nicolae_rosia@mentor.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-13libfdt: Sync fdt_for_each_subnode() with upstreamSimon Glass
The signature for this macro has changed. Bring in the upstream version and adjust U-Boot's usages to suit. Signed-off-by: Simon Glass <sjg@chromium.org> Update to drivers/power/pmic/palmas.c: Signed-off-by: Keerthy <j-keerthy@ti.com> Change-Id: I6cc9021339bfe686f9df21d61a1095ca2b3776e8
2016-10-13Merge git://git.denx.de/u-boot-dmTom Rini
2016-10-11power: regulator: lp873x: Add regulator supportKeerthy
The driver provides regulator set/get voltage enable/disable functions for lp873x family of PMICs. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11power: pmic: lp873x: Add the base pmic supportKeerthy
Add support to bind the regulators/child nodes with the pmic. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11power: regulator: palmas: Add regulator supportKeerthy
The driver provides regulator set/get voltage enable/disable functions for palmas family of PMICs. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-11power: pmic: Palmas: Add the base pmic supportKeerthy
Add support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write funtions to access pmic registers. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-11power: regulator: Add support for gpio regulatorsKeerthy
Add support for gpio regulators. As of now this driver caters to gpio regulators with one gpio. Supports setting voltage values to gpio regulators and retrieving the values. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-10regulator: fixed: honour optionality of enable gpioMarcel Ziswiler
According to the binding documentation the fixed regulator enable GPIO is optional. However so far registration thereof failed if no enable GPIO was specified. Fix this by making it entirely optional whether an enable GPIO is used. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-10-07power: pmic: add Ricoh RN5T567 PMIC supportStefan Agner
Add device model enabled PMIC driver for Ricoh RN5T567 PMIC used on Colibri iMX7. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-02power: regulator: add pwm regulatorKever Yang
add driver support for pwm regulator. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-23treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23drivers: squash lines for immediate returnMasahiro Yamada
Remove unneeded variables and assignments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-17sunxi: axp2xx: disable ldoio0/1 at bootHans de Goede
When cold-booting the ldoio0/1 regulators are always off / the gpios are always at tristate. But when re-booting from android these are sometimes on. Disable them at axp_init time (iow as early as possible) to remove this difference between a cold boot and a reboot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-09-06regulator: fixed: obey startup delayJohn Keeping
When enabling a fixed regulator, it may take some time to rise to the correct voltage. If we do not delay here then subsequent operations will fail. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-15power domain: add Tegra186 driverStephen Warren
In Tegra186, SoC power domains are manipulated using IPC requests to the BPMP (Boot and Power Management Processor). This change implements a driver that does that. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-12Merge git://git.denx.de/u-boot-dmTom Rini
2016-08-12power: pmic: act8846: add missing newline to debug statementsJohn Keeping
Signed-off-by: John Keeping <john@metanate.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-08-12power: regulator: act8846: fix reading valuesJohn Keeping
The voltage and control registers need to be looked up from the value in driver_data. Adjust the get_value and get_enable functions to match the corresponding set_* functions. Signed-off-by: John Keeping <john@metanate.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-08-12kconfig: use bool instead of boolean for type definition attributesMasahiro Yamada
Linux stopped the use of keyword 'boolean' in Kconfig. Refer to commit 6341e62b212a2541efb0160c470e90bd226d5496 ("kconfig: use bool instead of boolean for type definition attributes") in Linux Kernel. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-27Add a power domain framework/uclassStephen Warren
Many SoCs allow power to be applied to or removed from portions of the SoC (power domains). This may be used to save power. This API provides the means to control such power management hardware. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-27dm: Use dm_scan_fdt_dev() directly where possibleSimon Glass
Quite a few places have a bind() method which just calls dm_scan_fdt_dev(). We may as well call dm_scan_fdt_dev() directly. Update the code to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27dm: Convert users from dm_scan_fdt_node() to dm_scan_fdt_dev()Simon Glass
This new function is more convenient for callers, and handles pre-relocation situations automatically. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-25sunxi: power: add AXP809 supportChen-Yu Tsai
The A80 uses the AXP809 as its primary PMIC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-25sunxi: Implement poweroff support for axp818 pmicChen-Yu Tsai
Adds poweroff support for axp818 pmic. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-25sunxi: power: axp818: Add support for switch SWChen-Yu Tsai
The AXP818 has a switchable output, SW. This is commonly used for controlling power to the LCD backlight. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-25power: axp818: Fix typo for fldo2 Kconfig descriptionChen-Yu Tsai
Description said eldo2 instead of fldo2, a copy-paste error. Fixes: 38491d9c6515 ("power: axp818: Add support for FLDOs") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-25power: axp221: Remove switch case to simplify axp_set_eldoChen-Yu Tsai
The ELDO enable bits and registers are contiguous for axp221. Instead of a switch case testing against the index, just use the index to shift the bit or register offset. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-18drivers/power/pmic/pm8916.c: Make usid be uint32_tTom Rini
If get_dev_addr fails it will return FDT_ADDR_T_NONE and: >>> "priv->usid == 4294967295U" is always false regardless of the values of its operands. This occurs as the logical operand of if. Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reported-by: Coverity (CID: 143914) Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-01pmic: Add support for Qualcomm PM8916 PMICMateusz Kulikowski
This PMIC is connected on SPMI bus so needs SPMI support enabled. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01sunxi: Add support for Allwinner A64 SoCsSiarhei Siamashka
The Allwinner A64 SoC is used in the Pine64. This patch adds all bits necessary to compile U-Boot for it running in AArch64 mode. Unfortunately SPL is not ready yet due to legal problems, so we need to boot using the binary boot0 for now. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [agraf: remove SPL code, move to AArch64] Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31power: axp818: Add support for FLDOsChen-Yu Tsai
The FLDOs on AXP818 PMIC normally provide power to CPUS and USB HSIC PHY on the A83T/H8. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31power: axp818: Fix DCDC5 default voltageChen-Yu Tsai
DCDC5 is designed to supply VCC-DRAM, which is normally 1.5V for DDR3, 1.35V for DDR3L, and 1.2V for LPDDR3. Also remove CONFIG_AXP_DCDC5_VOLT from h8_homlet_v2_defconfig. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-15power: twl6030: Power off supportPaul Kocialkowski
This adds support for powering off (the omap SoC) from the twl6030. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2016-03-15power: twl6030: Remove ifdef around the codePaul Kocialkowski
The TWL6030 power driver is only built when CONFIG_TWL6030_POWER is selected, thus there is no reason to wrap the code with ifdef. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2016-03-15power: twl6030: Clear VUSB_IN_PMID bit on USB device setupPaul Kocialkowski
When booting from USB, the bootrom sets the VUSB_IN_PMID bit of the MISC2 register of the TWL6030. However, U-Boot sets the VUSB_IN_VSYS bit to enable VBUS input. As both bits are contradictory, enabling both disables the input, according to the TWL6030 TRM. Thus, we need to clear the VUSB_IN_PMID bit in case of an USB boot (which could just as well be a memory boot after USB timed out). Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2016-03-15power: twl6030: Configure VUSB voltage on USB device setupPaul Kocialkowski
This explicitly sets VUSB voltage to 3.3V when enabling USB. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2016-03-15power: twl6030: Device-index-specific MMC power initializationPaul Kocialkowski
Not every device has multiple MMC slots available, so it makes sense to enable only the required LDOs for the available slots. Generic code in omap_hsmmc will enable both VMMC and VAUX1, in doubt. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2016-03-15power: twl6030: Enable VAUX1 for eMMC power, depending on BOOT2 valuePaul Kocialkowski
This enables the VAUX1 supply, used for eMMC power in standard configurations. Its voltage is determined by the value of the BOOT2 pin of the TWL6030. Note that the TWL6030 might already have enabled this regulator at startup (depending on the value of the BOOT3 pin of the TWL6030), according to the TWL6030 datasheet. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>