summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2008-08-26bootm: refactor ramdisk locating codeKumar Gala
Move determing if we have a ramdisk and where its located into the common code. Keep track of the ramdisk start and end in the bootm_headers_t image struct. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-26bootm: refactor entry point codeKumar Gala
Move entry point code out of each arch and into common code. Keep the entry point in the bootm_headers_t images struct. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-26Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk
2008-08-26ADS5121: adjust image addresses in RAM and flashWolfgang Denk
Use the same mapping in flash as used by Linux Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-25change mvBL-M7 default env and move to vendor subdirAndre Schwarz
fix mvBL-M7 config and move to matrix_vision subdir Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-08-25MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family ↵Nick Spence
devices This patch adds elements to the 83xx sysconf structure and #define values that are used by mpc83xx family devices. Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-08-25MPC8349EMDS: Add PCI Agent (PCISLAVE) supportIra W. Snyder
Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a PCI card rather than a host computer. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-08-25MPC8349EMDS: use 83XX_GENERIC_PCI setup codeIra W. Snyder
Change the MPC8349EMDS board to use the generic PCI initialization code for the mpc83xx cpu. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-08-25Merge branch 'next'Kim Phillips
2008-08-25libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen()David Gibson
As well as fdt_subnode_offset(), libfdt includes an fdt_subnode_offset_namelen() function that takes the subnode name to look up not as a NUL-terminated string, but as a string with an explicit length. This can be useful when the caller has the name as part of a longer string, such as a full path. However, we don't have corresponding 'namelen' versions for fdt_get_property() and fdt_getprop(). There are less obvious use cases for these variants on property names, but there are circumstances where they can be useful e.g. looking up property names which need to be parsed from a longer string buffer such as user input or a configuration file, or looking up an alias in a path with IEEE1275 style aliases. So, since it's very easy to implement such variants, this patch does so. The original NUL-terminated variants are, of course, implemented in terms of the namelen versions. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2008-08-25libfdt: Improve documentation in libfdt.hWolfram Sang
Fix a few typos and mistakes. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2008-08-25dtc: Enable and fix -Wcast-qual warningsDavid Gibson
Enabling -Wcast-qual warnings in dtc shows up a number of places where we are incorrectly discarding a const qualification. There are also some places where we are intentionally discarding the 'const', and we need an ugly cast through uintptr_t to suppress the warning. However, most of these are pretty well isolated with the *_w() functions. So in the interests of maximum safety with const qualifications, this patch enables the warnings and fixes the existing complaints. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2008-08-25dtc: Enable and fix -Wpointer-arith warningsDavid Gibson
This patch turns on the -Wpointer-arith option in the dtc Makefile, and fixes the resulting warnings due to using (void *) in pointer arithmetic. While convenient, pointer arithmetic on void * is not portable, so it's better that we avoid it, particularly in libfdt. Also add necessary definition of uintptr_t needed by David Gibson's changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition comes from stdint.h, which u-boot doesn't have). -- gvb Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2008-08-22Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2008-08-21Fix OneNAND read_oob/write_oob functions compatabilityKyungmin Park
Also sync with kernel OneNAND codes Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-08-21ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patchStefan Roese
This patch fixes some minor issues introduced with the patch: ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika: - Rework memory-queue and PLB arbiter optimization code, that the local variable is not needed anymore. This removes one #ifdef. - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead of XXX+ 0x01). This was not introduced by Prodyut, just a copy-paste problem. Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-21ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,Prodyut Hazarika
PPC405EX and PPC460EX/GT/SX - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX processors - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared across processors (405 and 440/460) - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX processors - Add register bit definitions for Memory Queue Configuration registers Signed-off-by: Prodyut Hazarika <phazarika@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-21fdt: rework fdt_fixup_ethernet() to use env instead of bd_tKumar Gala
Move to using the environment variables 'ethaddr', 'eth1addr', etc.. instead of bd->bi_enetaddr, bi_enet1addr, etc. This makes the code a bit more flexible to the number of ethernet interfaces. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-21cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVERHeiko Schocher
Commit 00b1883a4cac59d97cd297b1a3a398db85982865 missed a few boards: include/configs/M5253DEMO.h include/configs/ml507.h include/configs/redwood.h This patch fixes this. Signed-off-by: Heiko Schocher <hs@denx.de>
2008-08-20Consolidate strmhz() implementationHaavard Skinnemoen
ARM, i386, m68k and ppc all have identical implementations of strmhz(). Other architectures don't provide this function at all. This patch moves strmhz() into lib_generic, reducing code duplication and providing a more unified API across architectures. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-20Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 BoardsAxel Beierlein
Tested with TQM5200S on STK52XX.200 Board Signed-off-by: Axel Beierlein <belatronix@web.de>
2008-08-20Add a hook to allow board-specific PIO mode setting.Steven A. Falco
This patch adds a hook whereby a board-specific routine can be called to configure hardware for a PIO mode. The prototype for the board-specific routine is: int inline ide_set_piomode(int pio_mode) ide_set_piomode should be prepared to configure hardware for a pio_mode between 0 and 6, inclusive. It should return 0 on success or 1 on failure. Signed-off-by: Steven A. Falco <sfalco@harris.com>
2008-08-20Replace enums in ata.h with an include of libata.hSteven A. Falco
This patch removes some enums from ata.h and replaces them with an include of libata.h. This way, we eliminate duplicated code, and prevent errors whereby the different versions could be out of sync. Signed-off-by: Steven A. Falco <sfalco@harris.com>
2008-08-20coldfire: fix CFI drivers activation with new macroJean-Christophe PLAGNIOL-VILLARD
rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-20hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVERHaavard Skinnemoen
CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-20Merge branch 'next' of git://git.denx.de/u-boot-avr32Haavard Skinnemoen
Conflicts: MAINTAINERS
2008-08-20hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPTHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-20favr-32-ezkit: Fix printf format warningsHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-20Merge branch 'mimc200' of git://git.denx.de/u-boot-avr32Haavard Skinnemoen
Conflicts: MAKEALL Makefile
2008-08-20avr32: Add MIMC200 boardMark Jackson
The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra 8MByte FLASH and 128KByte FRAM. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-18Minor code cleanup: keep lists sorted.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-18Add support for ADT7460 I2C monitor chipRicardo Ribalda Delgado
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2008-08-18Add 'license' command to U-Boot command lineHarald Welte
The 'license' command includes the U-Boot license (GPLv2) into the actual bootloader binary. The license text can be shown interactively at the U-Boot commandline. For products where the commandline can actually be accessed by the end user, this helps to prevent inadvertent GPL violations, since the GPLv2 license text can no longer be 'forgotten' to be included into the product. The 'license' command can be enabled by CONFIG_CMD_LICENSE. Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-08-18add 'unzip' command to u-boot commandlineHarald Welte
[PATCH] add new 'unzip' command to u-boot commandline common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from memory to memory, and option CONFIG_CMD_UNZIP to enable it Signed-off-by: Werner Almesberger <werner@openmoko.org> Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-08-14ColdFire: Multiple fixes for M5282EVBTsiChung Liew
Incorrect CFG_HZ value, change 1000000 to 1000. Rename #waring to #warning. RAMBAR1 uses twice in start.S, rename the later to FLASHBAR. Insert nop for DRAM setup. And, env_offset in linker file. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14ColdFire: Add M54451EVB platform support for MCF5445xTsiChung Liew
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14ColdFire: Add Serial Flash support for M54455EVBTsiChung Liew
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14ColdFire: Implement SBF feature for M5445EVBTsiChung Liew
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14ColdFire: Add SSPI feature for MCF5445xTsiChung Liew
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14ColdFire: Use CFI Flash driver for M54455EVBTsiChung Liew
Remove non-common flash driver in board/freescale/m54455evb/flash.c. The non-cfi flash will use CONFIG_FLASH_CFI_LEGACY to configure the flash attribute. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14ColdFire: Add M5253DEMO platform support for MCF5253TsiChung Liew
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14ColdFire: Raise M5253EVBE uart baudrate to 115200 bpsTsiChung Liew
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14Coding Style cleanup, update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-14Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk
2008-08-13Merge branch 'Makefile' of git://git.denx.de/u-boot-armWolfgang Denk
2008-08-13Fix OneNAND build breakKyungmin Park
Since page size field is changed from oobblock to writesize. But OneNAND is not updated. - fix bufferram management at erase operation This patch includes the NAND/OneNAND state filed too. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-08-13Merge branch 'master' of /home/stefan/git/u-boot/u-bootStefan Roese
2008-08-12drivers/mtd/nand: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD
rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-12drivers/mtd: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD
rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-12drivers/pci: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
generated by cgit v0.10.2 at 2024-07-29 04:28:24 (GMT)