summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2017-06-07configs: rk3328: config xhci controllerMeng Dongyang
Add config of max root ports and add config to enable xhci controller. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07configs: rk3328: add support for usb and config ehci and ohci driverMeng Dongyang
Add defconfig for usb and ehci and ohci controller, config maximal number of ports of the root hub for ohci driver. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07rockchip: rk3368: Add PX5 Evaluation boardAndy Yan
PX5 EVB is designed by Rockchip for automotive field with integrated CVBS (TP2825) / MIPI DSI / CSI / LVDS HDMI video input/output interface, audio codec ES8396, WIFI / BT (on RTL8723BS), Gsensor BMA250E and light&proximity sensor STK3410. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07rockchip: rk3368: Add initial support for RK3368 based GeekBoxAndreas Färber
The GeekBox is a TV box from GeekBuying, based on an MXM3 module. The module can be used with base boards such as the GeekBox Landingship. This adds basic support to chain-load U-Boot from Rockchip's miniloader. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07rockchip: rk3368: add Sheep boardAndy Yan
Sheep board is designed by Rockchip as a EVB for rk3368. Currently it is able to boot a linux kernel and system to console with the miniloader run as fist level loader. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
2017-06-07rockchip: rk3368: Add core start-up code for RK3368Andreas Färber
The RK3368 is an octa-core Cortex-A53 SoC from Rockchip. This adds basic support to chain-load U-Boot from Rockchip's miniloader. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07rockchip: board: puma_rk3399: add support for serial# and cpuid# via efusesPhilipp Tomsich
With our efuse driver for the RK3399 ready, we can add the board-specific code that consumes the cpuid from the efuse block and postprocesses it into the system serial (using the same CRC32 based derivation as in Linux). We expose the cpuid via two distinct environment variables: serial# - the serial number, as derived in Linux cpuid# - the raw 16 byte CPU id field from the fuse block Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-06-05ARM: ti: Update layout for MMC and eMMC (env and dfu)Jean-Jacques Hiblot
The problems with the current DFU layout are: MMC: The space allocated for u-boot is too small for the latest u-boot (>750KB). We need to increase it. eMMC uses a much bigger area (2MB). eMMC: region "u-boot.img.raw" overlaps the environment area and the region "spl-os-image.raw". both: region "spl-os-image.raw" is quite small and can't handle android kernels Fixing this requires growing some regions and moving others. Care has been taken to leave some room for further growth of "spl-os-args.raw". Also the "env" now appears in the dfu so that it's apparent that the region is not free space that can be used to grow "u-boot.img.raw". The MLO region is 0x100 sectors wide but the 0x100 are unused in case the MLO comes too overflow this areas. The total space allocated for those raw binaries is 16MB, of which 13+MB are reserved for the kernel image. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2017-06-05bootstage: Record time taken to set up the live device treeSimon Glass
This time is interesting as a comparision with the flat device tree time. Add it to the record. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05bootstage: Support SPLSimon Glass
At present bootstage only supports U-Boot proper. But SPL can also consume boot time so it is useful to have the record start there. Add bootstage support to SPL. Also support stashing the timing information when SPL finishes so that it can be picked up and reported by U-Boot proper. This provides a full boot time record, excluding only the time taken by the boot ROM. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05bootstage: Adjust to use const * where possibleSimon Glass
There are a few places that should use const *, such as bootstage_unstash(). Update these to make it clearer when parameters are changed. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05bootstage: Tidy up error return valuesSimon Glass
We should return a proper error number instead of just -1. This helps the caller to determine what when wrong. Update a few functions to fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05bootstage: Record the time taken to set up driver modelSimon Glass
Driver model is set up ones before relocation and once after. Record the time taken in each case. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05bootstage: Support relocating boostage dataSimon Glass
Some boards cannot access pre-relocation data after relocation. Reserve space for this and copy it during preparation for relocation. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05bootstage: Fix up code style and commentsSimon Glass
There are several code style and comment nits. Fix them and also remove the comment about passing bootstage to the kernel being TBD. This is already supported. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05bootstage: Convert to use malloc()Simon Glass
At present bootstage uses the data section of the image to store its information. There are a few problems with this: - It does not work on all boards (e.g. those which run from flash before relocation) - Allocated strings still point back to the pre-relocation data after relocation Now that U-Boot has a pre-relocation malloc() we can use this instead, with a pointer to the data in global_data. Update bootstage to do this and set up an init routine to allocate the memory. Now that we have a real init function, we can drop the fake 'reset' record and add a normal one instead. Note that part of the problem with allocated strings remains. They are reallocated but this will only work where pre-relocation memory is accessible after relocation. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05bootstage: Require timer_get_boot_us() to be definedSimon Glass
At present we provide a default version of this function for use by bootstage. However it uses the system timer and therefore likely requires driver model. This makes it impossible to time driver-model init. Drop the function and require boards to provide their own. Add a sandbox version also. There is a default implememtation in lib/time.c for boards which use CONFIG_SYS_TIMER_COUNTER. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05arm: am57xx: cl-som-am57x: adjust default env to the installation systemUri Mashiach
The SD card automatic installation system depends on the default environment of the previous U-Boot. Add the missing environment variables. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05arm: am57xx: cl-som-am57x: support for FS bootUri Mashiach
Supported boot devices are raw QSPI and raw SD card. Add support for a FAT16/32 file system for SD card. The SOC's boot ROM only supports FAT file system. Therefore remove the SPL support for the EXT file system. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05common: microblaze: Drop arch-specific declarationsSimon Glass
These are not needed and should not be in common.h. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: arm: freescale: layerscape: Move header files out of common.hSimon Glass
We should not have an arch-specific header file in common.h. Adjust the board files a little so it is not needed, and drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: arm: davinci: Move header file out of commonSimon Glass
We should not have an arch-specific header file in common.h. Instead, use the asm/hardware.h header to provide the required declarations, and drop the common.h changes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05common: ep93xx: Move arch-specific declarations out of commonSimon Glass
These declarations should not be in common. Remove those that are not needed and move the others to an arch-specific location. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: freescale: Move arch-specific imx code to arch-imxSimon Glass
These declarations should not be in common.h. Move them to an arch-specific header. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: freescale: Move arch-specific declarationsSimon Glass
The declarations should not be in common.h. Move them to the arch-specific headers. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Fixup thinko defined(FSL_LSCH3) -> defined(CONFIG_FSL_LSCH3)] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-05common: powerpc: Move arch-specific headersSimon Glass
Set up a new asm/ppc.h header file to hold this arch-specific stuff. It should not be in common.h. It probably should be refactored to use asm/arch instead, but that is a job for the maintainer. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: Move PPC4xx_SYS_INFO() et al to arch-specific headerSimon Glass
These definitions should not be in common.h. Move them to an arch-specific header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: Drop determine_sysper() and determine_pci_clock_per()Simon Glass
These arch-specific declarations should not be in common.h. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: Drop cpu_init_f() declarationsSimon Glass
These arch-specific functions are not needed here. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05arm: Remove include files from common.hSimon Glass
With a small tweak we can avoid including these files for all boards. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05nds32: Remove include files from common.hSimon Glass
With a few tweaks we can avoid including these files, which are only needed by two C files. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05x86: Don't include asm/u-boot.h in commonSimon Glass
With a small fixup to u-boot-x86.h, this is not actually needed anywhere, so drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05sandbox: Don't include asm/u-boot.h in commonSimon Glass
This is not actually needed anywhere, so drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05mips: Don't include asm/u-boot.h in commonSimon Glass
This is not actually needed anywhere, so drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-05arc: Don't include asm/u-boot.h in commonSimon Glass
This is not actually needed anywhere, so drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05nds32: Make u-boot-nds32.h a private headerSimon Glass
Rather than including this arch-specific header file in common.h, include it from within nds32's u-boot.h header. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05mips: Make u-boot-mips.h a private headerSimon Glass
Rather than including this arch-specific header file in common.h, include it from within mips's u-boot.h header. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-05arm: Make u-boot-arm.h a private headerSimon Glass
Rather than including this arch-specific header file in common.h, include it from within arm's u-boot.h header. Also drop the comment about something to be fixed. It has been there forever and it is not clear what it means. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05x86: Make u-boot-x86.h a private headerSimon Glass
Rather than including this arch-specific header file in common.h, include it from within x86's u-boot.h header. Also drop the comment about something to be fixed. It is not clear what needs fixing. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05sandbox: Make u-boot-sandbox.h a private headerSimon Glass
Rather than including this arch-specific header file in common.h, include it from within sandbox's u-boot.h header. Also drop the comment about something to be fixed. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05arc: Make u-boot-arc.h a private headerSimon Glass
Rather than including this arch-specific header file in common.h, include it from within arc's u-boot.h header. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05samsung: usb: Drop ohci-s3c24xx driverSimon Glass
This is not used anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05api: Add a header for api_init()Simon Glass
Put this in its own header instead of using common.h. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: Move get_OPB_freq() and get_PCI_freq() to PPC headerSimon Glass
These should not be in common.h. Move the to an arch-specific header. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: Move pcie_setup_hoses() to PPC headerSimon Glass
Only one board needs this definition. Move it to an arch-specific header. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: Drop pci_master_init()Simon Glass
This should not be in common.h. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: Move pci_target_init() to PPC headerSimon Glass
Only one boards needs this definition. Move it to an arch-specific header. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: Drop pci_pre_init() and is_pci_host()Simon Glass
These should not be in common.h. They are used in some legacy PowerPC code. Just drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: Drop inclusion of pci.hSimon Glass
This should not be in common.h - remove it and update the only file that needs it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05t81xx: Migrate TI81XX/TI816X/TI814X symbols to KconfigTom Rini
The symbol CONFIG_TI81XX is used for the parts that are common to the TI816x and TI814x SoCs and are not part of CONFIG_ARCH_OMAP2PLUS nor CONFIG_AM33XX. It however has so few uses that we can just modify the code to check for both and drop the symbol. The symbols CONFIG_TI816X and CONFIG_TI814X are for the repective SoCs. Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v0.10.2 at 2024-08-06 14:32:23 (GMT)