summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2010-01-25gzip/zlib: make features optionalMike Frysinger
If you really want to slim down U-Boot and you would rather use a higher compression scheme (like LZMA), it'd be nice to disable gzip/zlib since these code bases take up a significant amount of space. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-25mkimage: Add Freescale imx Boot Image support (imximage)Stefano Babic
This patch adds support for "imximage" (MX Boot Image) to the mkimage utility. The imximage is used on the Freescales's MX.25, MX.35 and MX.51 processors. Further details under doc/README.imximage. This patch was tested on a Freescale mx51evk board. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-01-25mpc5xxx: Support CPU internal watchdog.Detlev Zundel
Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-01-23Merge branch 'master-sync' of git://git.denx.de/u-boot-armWolfgang Denk
2010-01-23at91: Enable slow master clock on meesc boardDaniel Gorsulowski
Normally the processor clock has a divisor of 2. In some cases this this needs to be set to 4. Check the user has set environment mdiv to 4 to change the divisor. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2010-01-23SPEAr : Support added for SPEAr320 boardVipin KUMAR
SPEAr320 SoC support contains basic spear320 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver - emi driver(cfi support) Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Support added for SPEAr310 boardVipin KUMAR
SPEAr310 SoC support contains basic spear310 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver - emi driver(cfi support) Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : emi controller initialization for CFI driver supportVipin KUMAR
SPEAr310 and SPEAr320 SoCs contain an EMI controller to interface Paraller NOR flashes. This patch adds the support for this IP The standard CFI driver is used to interface with NOR flashes Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Support added for SPEAr300 boardVipin KUMAR
SPEAr300 SoC support contains basic spear300 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Support for HW mac id read/write from i2c memVipin KUMAR
This patch adds the support to read and write mac id from i2c memory. For reading: if (env contains ethaddr) pick env ethaddr else pick ethaddr from i2c memory For writing: chip_config ethaddr XX:XX:XX:XX:XX:XX writes the mac id in i2c memory Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Support added for SPEAr600 boardVipin KUMAR
SPEAr600 SoC support contains basic spear600 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : usbd driver support for SPEAr SoCsVipin KUMAR
SPEAr SoCs contain a synopsys usb device controller. USB Device IP can work in 2 modes - DMA mode - Slave mode The driver adds support only for slave mode operation of usb device IP. This driver is used along with standard USBTTY driver to obtain a tty interface over USB on the host Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : nand driver support for SPEAr SoCsVipin KUMAR
SPEAr SoCs contain an FSMC controller which can be used to interface with a range of memories eg. NAND, SRAM, NOR. Currently, this driver supports interfacing FSMC with NAND memories Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : smi driver support for SPEAr SoCsVipin KUMAR
SPEAr SoCs contain a serial memory interface controller. This controller is used to interface with spi based memories. This patch adds the driver for this IP. Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : i2c driver support added for SPEAr SoCsVipin KUMAR
SPEAr SoCs contain a synopsys i2c controller. This patch adds the driver for this IP. Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Adding basic SPEAr architecture support.Vipin KUMAR
SPEAr Architecture support added. It contains the support for following SPEAr blocks - Timer - System controller - Misc registers Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23ARM Update mach-typesTom Rix
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit 2045124ffd1a5e46d157349016a2c50f19c8c91d Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2010-01-23Kirkwood: Upgated licencing for files imported from linux source to GPLv2 or ↵Prafulla Wadaskar
later These are few files directly imported from Linux kernel source. Those are not modifyed at all ar per strategy. These files contains source with GPLv2 only whereas u-boot expects GPLv2 or latter These files are updated for the same from prior permission from original writes Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-01-23s5pc1xx: update cache routinesMinkyu Kang
Because of v7_flush_dcache_all is moved to omap3/cache.S and s5pc110 needs cache routines, update s5pc1xx cache routines. l2_cache_enable and l2_caceh_disable are moved from cache.c to cache.S and invalidate_dcache is modified for SoC specific. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-01-23samsung: fix DMC1_MEM_CFG for s3c64xxSeunghyeon Rhee
The MSB of DMC1_MEM_CFG can be set to '1' for separate CKE control for S3C6400. In the configuration of SMDK6400, however, two 16-bit mDDR (SAMSUNG K4X51163) chips are used in parallel to form 32-bit memory bus and there is no need to control CKE for each chip separately. AFAIK, CKE1 is not at all connected. Only CKE0 is used. Futhermore, it should be '0' always for S3C6410. When tested with a board which has a S3C6410 and the same memory configuration, a side effect is observed that u-boot command "reset" doesn't work leading to system hang. Leaving the bit clear is safe in most cases. Signed-off-by: Seunghyeon Rhee <seunghyeon@lpmtec.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-01-23ppc4xx: Kilauea: Add CPLD version detection and EBC reconfigurationStefan Roese
A newer CPLD version on the 405EX evaluation board requires a different EBC controller setup for the CPLD register access. This patch adds a CPLD version detection for Kilauea and code to reconfigure the EBC controller (chip select 2) for the old CPLD if no new version is found. Additionally the CPLD version is printed upon bootup: Board: Kilauea - AMCC PPC405EX Evaluation Board (CPLD rev. 0) Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Wolfgang Denk <wd@denx.de> Cc: Zhang Bao Quan <bqzhang@udtech.com.cn>
2010-01-21image.h: avoid command.h for host toolsMike Frysinger
The u-boot command structures don't get used with host systems, so don't bother including it when building host code. This avoids an implicit need on config.h in the process. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-21lmb: only force on arches that use itMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-21sha1: add dedicated config optionMike Frysinger
The sha1 code is currently compiled for everyone, but in reality, it's only used by the FIT code. So make it optional just like MD5. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-21Merge branch 'master' of git://git.denx.de/u-boot-mipsWolfgang Denk
2010-01-21Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk
2010-01-21Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk
2010-01-20MIPS: qemu_mips: Import asm/unaligned.h from the Linux kernelShinya Kuribayashi
with a few adjustments for U-Boot. This fixes the following build error: make -C lib_generic/ zlib.c:31:27: error: asm/unaligned.h: No such file or directory zlib.c: In function 'inflate_fast': zlib.c:641: warning: implicit declaration of function 'get_unaligned' make[1]: *** [zlib.o] Error 1 make[1]: Leaving directory `/home/skuribay/git/u-boot.git/lib_generic' make: *** [lib_generic/libgeneric.a] Error 2 Reported-by: Himanshu Chauhan <himanshu@symmetricore.com> Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2010-01-19MX31: Activate NAND environment on i.MX31 PDK board.Magnus Lilja
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2010-01-19MX31: Add struct definition for clock control module in i.MX31.Magnus Lilja
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2010-01-19microblaze: zlib needs asm/unaligned.hMichal Simek
Microblaze has own hw unaligned handler if is available. Use big endian version. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18Blackfin: add support for kgdbRobin Getz
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-18asm-generic/signal.h: import from linuxRobin Getz
We need signal.h for Blackfin/KGDB, so import the asm-generic/signal.h for people to leverage. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17powerpc: keymile boards updatesHeiko Schocher
- malloc size 4 MB for all keymile boards - use generic FDT code for fixing up the DTS - enable unit-led at startup for keymile boards - remove some dts updates for keymile boards - ppc_83xx, kmeter1: take FE/GbE PHYs out of reset - ppc_83xx, kmeter1: change from Intel Strata to Spansion 64MB flash changed from Intel Strata to Spansion 64MB flash and changed flash layout. +---------+----------+-----------------------+-----------------------------+ | name | size | range | description | +---------+----------+-----------------------+-----------------------------+ | u-boot | 768 KB | 0xf0000000-0xf00bffff | for u-boot | | env | 128 KB | 0xf00c0000-0xf00dffff | for environment | | envred | 128 KB | 0xf00e0000-0xf00fffff | for environment (redundant) | | ubi0 | 64512 KB | 0xf0100000-0xf3ffffff | ubi0 for ubi volumes | +---------+----------+-----------------------+-----------------------------+ Signed-off-by: Heiko Schocher <hs@denx.de>
2010-01-17cmd_eeprom: I2C updatesHeiko Schocher
- CONFIG_ENV_EEPROM_IS_ON_I2C define this, if you have I2C and SPI activated, and your EEPROM, which holds the environment, is on the I2C bus. - CONFIG_I2C_ENV_EEPROM_BUS if you have an Environment on an EEPROM reached over I2C muxes, you can now define, how to reach this EEPROM. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-01-17move definition of macros likely and unlikely to compiler.hMatthias Kaehlcke
the macros likely and unlikely were defined in include/linux/mtd/compat.h, but used in code not related to MTD. moved the macro definitions to compiler.h Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
2010-01-17mpc5xxx.h: Add structure definition for XLB arbiter block.Detlev Zundel
Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-01-17config_defaults.h: new header for common u-boot config defaultsMike Frysinger
There are a bunch of features in U-Boot that we want to enable by default, and it's best if we centralize them in one place rather than updating all the board files out there. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk
2010-01-17PCIe, USB: Replace 'end point' references with 'endpoint'Peter Tyser
When referring to PCIe and USB 'endpoint' is the standard naming convention. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Remy Bohmer <linux@bohmer.net>
2010-01-17Make getenv_IPaddr() globalDirk Behme
There are boards out there that do not have network support in U-Boot (CONFIG_CMD_NET not set), but they do so in Linux. This makes it desirable to be able to port network configuration (like the IP address) to the Linux kernel. We should not make the passing of the IP configuration to Linux dependent on U-Boot features / settings. For this, make getenv_IPaddr() global. This fixes build error u-boot/lib_xxx/board.c:360: undefined reference to `getenv_IPaddr' on various architectures. Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Acked-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-17Blackfin: tcm-bf518: new board portHarald Krapfenbauer
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17Blackfin: enable JFFS summary support for ADI boardsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17Blackfin: bf518f-ezbrd: increase monitor lengthMike Frysinger
The addition of KGDB overflowed the current linker section. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17Blackfin: add a netconsole helperRobin Getz
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17Blackfin: add support for BF527-EZKIT v2.1Michael Hennerich
The new board revision has a different LCD. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17Blackfin: pull io funcs from linuxMike Frysinger
Some common code uses more of the io.h funcs than we currently provide, so pull in all of the ones from the linux kernel. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17Blackfin: section off the CF/IDE io.h hacksMike Frysinger
These need to be rethought, but until that happens, isolate the hack so that we can extend the common code without breaking things. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17Blackfin: drop unused funcs from io.hMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17Blackfin: convert bfin_sdh to generic mmcCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v0.10.2 at 2024-07-10 05:25:07 (GMT)