summaryrefslogtreecommitdiff
path: root/test/py
AgeCommit message (Collapse)Author
2017-07-22tests: test_dfu.py: Add example udev rule for host_usb_dev_nodeTom Rini
If one does not already have a rule to create a custom device node when a given device enumerates it can be useful to have udev create a bus path based node to the entry in /dev/bus/usb that was just enumerated. Given that DFU itself does not require a /dev entry it is a good idea to provide a rule that will generate one. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-11sandbox: Stop printing platdata at the start of SPLSimon Glass
Currently we have code which prints out platform data at the start of SPL. Now that we have tests for dtoc this is probably not necessary. Drop it. Update test_ofplatdata to check for empty output since it is useful to check that sandbox_spl works as expected. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05test: py: hush: Add echo dependencyMichal Simek
Some tests depends on echo command to be present. Reported-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-05test: py: Use global pytestmark for hush testsMichal Simek
All tests in test_hush_if_test depends on hush parser to be present. This patch simplify test dependencies by using global pytestmark. Reported-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2017-05-22test: py: Add cmd_echo dependencyMichal Simek
There is missing dependency on echo command. Mark tests which requires echo. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2016-11-27travis: Add efi_loader grub2 testAlexander Graf
We have all the building blocks now to run arbitrary efi applications in travis. The most important one out there is grub2, so let's add a simple test to verify that grub2 still comes up. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-27efi_loader: Allow to compile helloworld.efi w/o bundling itAlexander Graf
Today we can compile a self-contained hello world efi test binary that allows us to quickly verify whether the EFI loader framwork works. We can use that binary outside of the self-contained test case though, by providing it to a to-be-tested system via tftp. This patch separates compilation of the helloworld.efi file from including it in the u-boot binary for "bootefi hello". It also modifies the efi_loader test case to enable travis to pick up the compiled file. Because we're now no longer bloating the resulting u-boot binary, we can enable compilation always, giving us good travis test coverage. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-26tests: Add efi_loader hello world testAlexander Graf
Now that we have working network tests and a hello world efi application built inside our tree, we can automatically test that efi binary running inside of U-Boot. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-26tests: net: Offset downloads to 4MBAlexander Graf
The network test currently downloads files at 0MB offset of RAM start. This works for most ARM systems, but x86 has weird memory layout constraints on the first MB of RAM. To not get caught into any of these, let's add a 4MB pad from start of RAM to the default memory offset. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-21test/py: expose config and log as session scoped fixtureStefan Brüns
If a test uses a fixture which is expensive to setup, the fixture can possibly created with session or module scope. As u_boot_console has function scope, it can not be used in this case. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-10-23test/py: ensure a log section exists for skipped testsStephen Warren
In pytest 3, runtestprotocol() may not call pytest_runtest_setup() if the test is skipped. That call is required to create a section for the test in the log file. If this is skipped, the call to log.end_section() at the tail of pytest_runtest_protocol() will throw an exception. This patch ensures that a log section always exists, both to avoid the exception and to ensure that a consistently structured log file is always created. Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reported-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Tom Rini <trini@konsulko.com>
2016-10-14test/py/tests/test_sleep.py: Add check for CONFIG_CMD_MISCTom Rini
We can only run this command if the sleep command is enabled and that depends on CONFIG_CMD_MISC Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-13test: add NFS download testGuillaume GARDET
Add a NFS download test, based on TFTP test. Tested on i.MX6 SabreLite board. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@konsulko.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-09-22test/py/tests/test_vboot.py: Add check that we boot the imageTom Rini
Make sure that when we're telling bootm to boot an image, and we expect the image to boot we get the output from sandbox that we attempted to run Linux and that U-Boot completed its job. Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com>
2016-08-20test/py: match prompt only at line boundariesStephen Warren
This prevents capture of command output from terminating early on boards that use a simple prompt (e.g. "=> ") that appears in the middle of command output (e.g. crc32's "... ==> 2fa737e0"). Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2016-08-06test: Adjust run_command_list() to return a list of stringsSimon Glass
Return one string for each command that was executed. This seems cleaner. Suggested-by: Teddy Reed <teddy.reed@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2016-08-06test: Add a function to restart U-BootSimon Glass
Add a proper function for this rather than using internal functions. Use it in the single call site. Also, do a restart at the end of the vboot test to reset to the normal device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Stephen Warren <swarren@nvidia.com>
2016-08-06test: vboot: Put each test variant in its own sectionSimon Glass
Use 'cons.log.section' feature to split up the test output. This makes it easier to read. Suggested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2016-08-06test: Rename sha to sha_algo and pass it aroundSimon Glass
Rename this argument and pass it to each function that needs it, instead of making it global. Suggested-by: Stephen Warren <swarren@nvidia.com> Suggested-by: Teddy Reed <teddy.reed@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2016-08-06test: Drop the cmd() functionSimon Glass
Instead of this, use the existing run_and_log() function, enhanced to support a command string as well as a list of arguments. Suggested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2016-08-06test: Fix typos in commentsSimon Glass
Fix some typos in various files introduced with the vboot test conversion. Reported-by: Teddy Reed <teddy.reed@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2016-08-06test: Check exit status in run_and_log_expect_exception()Simon Glass
This check was missed. Add it and make the message more verbose. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Tom Rini <trini@konsulko.com> Fixes: 9e17b034 (test/py: Provide a way to check that a command fails)
2016-08-06test: Fix typos and tidy upSimon Glass
Fix review comments that were missed at the time. Also explain why we need to regenerate the device tree for each test. Reported-by: Teddy Reed <teddy.reed@gmail.com> Suggested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: f6349c3c (test: Add a README)
2016-07-22test/py: vboot can be run only at SandboxMichal Simek
Getting this error: Zynq> sb load hostfs - 100 /home/monstr/data/disk/u-boot/build-zynq_zc706/test.fit Unknown command 'sb' - try 'help' because sb command is present only for Sandbox obj-$(CONFIG_SANDBOX) += host.o that's why mark this test to be run only at Sandbox Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-22test/py: use absolute dts path in vboot testStephen Warren
Without this, the test fails if the test is run with a cwd other than the root of the U-Boot source tree. Fixes: 8729d582595d ("test: Convert the vboot test to test/py") Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-17test: Adjust the of-platdata test run conditionSimon Glass
This should be spl_of_platdata, since otherwise it will try to run on boards that don't support of-platdata. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-15Merge git://git.denx.de/u-boot-dmTom Rini
2016-07-15dm: Add a test for of-platdataSimon Glass
Add a simple test which checks that the of-platdata system is working correctly. The sequence is as follows: - SPL starts up and probes all the UCLASS_MISC drivers - There are 3 of these in sandbox.dts - Therefore there should be 3 U_BOOT_DEVICE() declarations in dt-platdata.c - These should produce 3 sandbox_spl_test devices - Each device prints out its platform data when probed - This test checks for this output and compares it against expectations Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-15test/py: Start sandbox SPL when enabledSimon Glass
When sandbox SPL is enabled we want to start that rather than U-Boot proper, since some tests may rely on running it first. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-15test/py: Provide a way to get early console outputSimon Glass
Some tests want to check the console output from SPL or U-Boot proper. Provide a means to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-15test/py: Note which console produced unexpected outputSimon Glass
At present the SPL and U-Boot consoles both present the same error message when the expected console output does not appear. Add "SPL" to the SPL error message to resolve this ambiguity. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-15test/py: Handle testing with the sandbox_spl boardSimon Glass
This board can sometimes be used for tests. Handle it the same way as sandbox. Note: I plan to drop the sandbox_spl board at some point and merge its features into sandbox. So this commit may not be necessary. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14test: Convert the vboot test to test/pySimon Glass
Now that we have a suitable test framework we should move all tests into it. The vboot test is a suitable candidate. Rewrite it in Python and move the data files into an appropriate directory. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14test/py: Add a helper to run a list of U-Boot commandsSimon Glass
Some tests want to execute a sequence of commands. Add a helper for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14test/py: Provide a way to check that a command failsSimon Glass
Sometimes we want to run a command and check that it fails. Add a function to handle this. It can check the return code and also make sure that the output contains a given error message. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14test/py: Add an option to execute a string containing a commandSimon Glass
It is sometimes inconvenient to convert a string into a list for execution with run_and_log(). Provide a helper function to do this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14test/py: Return output from run_and_log()Simon Glass
It is useful to be able to obtain the output from a command. Return it from this function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14test/py: Provide output from exceptions with RunAndLog()Simon Glass
Tests may want to look at the output from running a command, even if it fails (e.g. with a non-zero return code). Provide a means to obtain this. Another approach would be to return a class object containing both the output and the exception, but I'm not sure if that would result in a lot of refactoring. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14test/py: Allow RunAndLog() to return the outputSimon Glass
Tests may want to look at the output from running a command. Return it so that this is possible. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14test/py: Allow tests to control the sandbox device-tree fileSimon Glass
Normally tests will run with the test.dtb file designed for this purpose. However, the verified boot tests need to run with their own device-tree file, containing a public key. Make the device-tree file a config option so that it can be adjusted by tests. The default is to keep the current behaviour. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-08test/py: support 'memstart =' in u_boot_utils.find_ram_base()Daniel Schwierzeck
Some archs like MIPS or PPC have a different 'bdinfo' output than ARM regarding the memory configuration. Also support 'memstart = 0x*' in u_boot_utils.find_ram_base() to make all tests requiring the RAM base working on those archs. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2016-07-08test/py: strip VT100 codes from match bufferStephen Warren
Prior to this patch, any VT100 codes emitted by U-Boot are considered part of a command's output, which often causes tests to fail. For example, test_env_echo_exists executes printenv, and then considers any text on a line before an = sign as a valid U-Boot environment variable name. This includes any VT100 codes emitted. When the test later attempts to use that variable, the name would be invalid since it includes the VT100 codes. Solve this by stripping VT100 codes from the match buffer, so they are never seen by higher level test code. The codes are still logged unmodified, so that users can expect U-Boot's exact output without interference. This does clutter the log file a bit. However, it allows users to see exactly what U-Boot emitted rather than a modified version, which hopefully is better for debugging. It's also much simpler to implement, since logging happens as soon as text is received, and so stripping the VT100 codes from the log would require handling reception and stripping of partial VT100 codes. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-07-08test/py: fix CONFIG_ testsStephen Warren
Some CONFIG_ variables were recently renamed, but test/py wasn't updated to match. This causes some tests to be skipped. Fix test/py so the tests are run. Fixes: 11636258981a ("Rename reset to sysreset") Fixes: f1f9d4fac527 ("hush: complete renaming CONFIG_SYS_HUSH_PARSER to CONFIG_HUSH_PARSER") Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-06-19test/py: fix printenv signon message disable codeStephen Warren
CONFIG_VERSION_VARIABLE isn't always defined, so we can't simply look up its value directly, or an exception will occur if it isn't defined. Instead, we must use .get() to supply a default value if the variable isn't defined. Fixes: da37f006e7c5 ("tests: py: disable main_signon check for printenv cmd") Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-06-09tests: py: disable main_signon check for printenv cmdHeiko Schocher
if CONFIG_VERSION_VARIABLE is set, the U-Boot environment contains a "vers" variable with the current U-Boot version string. If now "printenv" is called, test/py fails as it detects the main_sign string, which is in this case correct. So check only the main_sign as an error, if CONFIG_VERSION_VARIABLE is not set. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-05-27test/py: Support setting up specific timeoutMichal Simek
Large file transfers, flash erasing and more complicated tests requires more time to finish. Provide a way to setup specific timeout directly in test. For example description for 50s test: timeout = 50000 with u_boot_console.temporary_timeout(timeout): u_boot_console.run_command(...) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2016-05-27test/py: fix NameError exception if bdi cmd is not supportedHeiko Schocher
test/py raises an error, if a board has not enabled bdi command > pytest.skip('bdinfo command not supported') E NameError: global name 'pytest' is not defined import pytest in test/py/u_boot_utils.py fixes this. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2016-05-13tests: py: fix NameError exception if bdi cmd is not supportedHeiko Schocher
test/py raises an error, if a board has not enabled bdi command > pytest.skip('bdinfo command not supported') E NameError: global name 'pytest' is not defined import pytest in test/py/u_boot_utils.py fixes this. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2016-05-06test/py: dfu: wait for USB device to go away at bootStephen Warren
It can take a while for a host machine to notice that a USB device has disconnected, and process the change. At the end of the DFU test, we wait up to 10 seconds for this to happen. This change makes the test wait the same (up to) 10 seconds at the start of the test for any previously active USB device-mode session to be cleaned up. Such as session might have been used to download U-Boot into memory for example; this is certainly true on my Tegra test systems. This changes should solve the DFU test intermittency issues I've been seeing on some Tegra devices. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-04-25tests: py: dfu: Provide functionality to set test and dummy files alt settingsLukasz Majewski
After concatenation of "dfu_alt_info" variable from "dfu_alt_boot" and "dfu_alt_system" it may happen that test and dummy files alt settings are different than default 0 and 1. This patch provides the ability to set different values for them. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Stephen Warren <swarren@nvidia.com> --- Changes for v3: - replace variables declarations with ones read from configuration file - remove not necessary str() conversion at DFU host command generation Changes for v2: - generate "alt_info" automatically - use file names as alt settings instead of numerical values - extend in-code documentation