blob: 0556e73b3aeee5e947aca007e04e047e067302d6 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
|
Overview
--------
The LS1043A Reference Design Board (RDB) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS1043A
LayerScape Architecture processor. The LS1043ARDB provides SW development
platform for the Freescale LS1043A processor series, with a complete
debugging environment. The LS1043A RDB is lead-free and RoHS-compliant.
LS1043A SoC Overview
--------------------
The LS1043A integrated multicore processor combines four ARM Cortex-A53
processor cores with datapath acceleration optimized for L2/3 packet
processing, single pass security offload and robust traffic management
and quality of service.
The LS1043A SoC includes the following function and features:
- Four 64-bit ARM Cortex-A53 CPUs
- 1 MB unified L2 Cache
- One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving
support
- Data Path Acceleration Architecture (DPAA) incorporating acceleration the
the following functions:
- Packet parsing, classification, and distribution (FMan)
- Queue management for scheduling, packet sequencing, and congestion
management (QMan)
- Hardware buffer management for buffer allocation and de-allocation (BMan)
- Cryptography acceleration (SEC)
- Ethernet interfaces by FMan
- Up to 1 x XFI supporting 10G interface
- Up to 1 x QSGMII
- Up to 4 x SGMII supporting 1000Mbps
- Up to 2 x SGMII supporting 2500Mbps
- Up to 2 x RGMII supporting 1000Mbps
- High-speed peripheral interfaces
- Three PCIe 2.0 controllers, one supporting x4 operation
- One serial ATA (SATA 3.0) controllers
- Additional peripheral interfaces
- Three high-speed USB 3.0 controllers with integrated PHY
- Enhanced secure digital host controller (eSDXC/eMMC)
- Quad Serial Peripheral Interface (QSPI) Controller
- Serial peripheral interface (SPI) controller
- Four I2C controllers
- Two DUARTs
- Integrated flash controller supporting NAND and NOR flash
- QorIQ platform's trust architecture 2.1
LS1043ARDB board Overview
-----------------------
- SERDES Connections, 4 lanes supporting:
- PCI Express 2.0 with two PCIe connectors supporting: miniPCIe card and
standard PCIe card
- QSGMII with x4 RJ45 connector
- XFI with x1 RJ45 connector
- DDR Controller
- 2GB 32bits DDR4 SDRAM. Support rates of up to 1600MT/s
-IFC/Local Bus
- One 128MB NOR flash 16-bit data bus
- One 512 MB NAND flash with ECC support
- CPLD connection
- USB 3.0
- Two super speed USB 3.0 Type A ports
- SDHC: connects directly to a full SD/MMC slot
- DSPI: 16 MB high-speed flash Memory for boot code and storage (up to 108MHz)
- 4 I2C controllers
- UART
- Two 4-pin serial ports at up to 115.2 Kbit/s
- Two DB9 D-Type connectors supporting one Serial port each
- ARM JTAG support
Memory map from core's view
----------------------------
Start Address End Address Description Size
0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB
0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB
0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB
0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB
0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB
0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB
0x00_7E80_0000 0x00_7E80_FFFF IFC - NAND Flash 64KB
0x00_7FB0_0000 0x00_7FB0_0FFF IFC - FPGA 4KB
0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB
Booting Options
---------------
a) NOR boot
b) NAND boot
c) SD boot
|
