Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] pxa: corgi backlight driver should not select ssp drivers
  [ARM] 5321/1: Kirkwood: fix typo in Makefile
  [ARM] 5320/1: fix assembly constraints in implementation of do_div()
  [ARM] 5318/1: Swap the PRRR and NMRR values in proc-v7.S
  [ARM] 5316/1: AT91: oops (regression) fix on gpio irq
  [ARM] msm: vreg interface to msm7k pmic
  [ARM] msm: dma: various basic dma improvements and bugfixes
  [ARM] msm: clock: provide clk_*() api support for
  [ARM] msm: clean up iomap and devices
  [ARM] msm: add proc_comm support, necessary for clock and power control
  [ARM] msm: rename ARCH_MSM7X00A to ARCH_MSM
  [ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h
  [ARM] pxa: update {corgi,spitz}_defconfig to favor SPI-based drivers
  [ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig
  Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"

1 files changed, 165 insertions, 0 deletions

diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h
new file mode 100644
index 0000000..834760f
--- /dev/null
+++ b/arch/arm/mach-msm/proc_comm.h
@@ -0,0 +1,165 @@
+/* arch/arm/mach-msm/proc_comm.h
+ *
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_
+#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_
+
+enum {
+	PCOM_CMD_IDLE = 0x0,
+	PCOM_CMD_DONE,
+	PCOM_RESET_APPS,
+	PCOM_RESET_CHIP,
+	PCOM_CONFIG_NAND_MPU,
+	PCOM_CONFIG_USB_CLKS,
+	PCOM_GET_POWER_ON_STATUS,
+	PCOM_GET_WAKE_UP_STATUS,
+	PCOM_GET_BATT_LEVEL,
+	PCOM_CHG_IS_CHARGING,
+	PCOM_POWER_DOWN,
+	PCOM_USB_PIN_CONFIG,
+	PCOM_USB_PIN_SEL,
+	PCOM_SET_RTC_ALARM,
+	PCOM_NV_READ,
+	PCOM_NV_WRITE,
+	PCOM_GET_UUID_HIGH,
+	PCOM_GET_UUID_LOW,
+	PCOM_GET_HW_ENTROPY,
+	PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE,
+	PCOM_CLKCTL_RPC_ENABLE,
+	PCOM_CLKCTL_RPC_DISABLE,
+	PCOM_CLKCTL_RPC_RESET,
+	PCOM_CLKCTL_RPC_SET_FLAGS,
+	PCOM_CLKCTL_RPC_SET_RATE,
+	PCOM_CLKCTL_RPC_MIN_RATE,
+	PCOM_CLKCTL_RPC_MAX_RATE,
+	PCOM_CLKCTL_RPC_RATE,
+	PCOM_CLKCTL_RPC_PLL_REQUEST,
+	PCOM_CLKCTL_RPC_ENABLED,
+	PCOM_VREG_SWITCH,
+	PCOM_VREG_SET_LEVEL,
+	PCOM_GPIO_TLMM_CONFIG_GROUP,
+	PCOM_GPIO_TLMM_UNCONFIG_GROUP,
+	PCOM_NV_WRITE_BYTES_4_7,
+	PCOM_CONFIG_DISP,
+	PCOM_GET_FTM_BOOT_COUNT,
+	PCOM_RPC_GPIO_TLMM_CONFIG_EX,
+	PCOM_PM_MPP_CONFIG,
+	PCOM_GPIO_IN,
+	PCOM_GPIO_OUT,
+	PCOM_RESET_MODEM,
+	PCOM_RESET_CHIP_IMM,
+	PCOM_PM_VID_EN,
+	PCOM_VREG_PULLDOWN,
+	PCOM_NUM_CMDS,
+};
+
+enum {
+	 PCOM_INVALID_STATUS = 0x0,
+	 PCOM_READY,
+	 PCOM_CMD_RUNNING,
+	 PCOM_CMD_SUCCESS,
+	 PCOM_CMD_FAIL,
+};
+
+/* List of VREGs that support the Pull Down Resistor setting. */
+enum {
+	PM_VREG_PDOWN_MSMA_ID,
+	PM_VREG_PDOWN_MSMP_ID,
+	PM_VREG_PDOWN_MSME1_ID,	/* Not supported in Panoramix */
+	PM_VREG_PDOWN_MSMC1_ID,	/* Not supported in PM6620 */
+	PM_VREG_PDOWN_MSMC2_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_GP3_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_MSME2_ID,	/* Supported in PM7500 and Panoramix only */
+	PM_VREG_PDOWN_GP4_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_GP1_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_TCXO_ID,
+	PM_VREG_PDOWN_PA_ID,
+	PM_VREG_PDOWN_RFTX_ID,
+	PM_VREG_PDOWN_RFRX1_ID,
+	PM_VREG_PDOWN_RFRX2_ID,
+	PM_VREG_PDOWN_SYNT_ID,
+	PM_VREG_PDOWN_WLAN_ID,
+	PM_VREG_PDOWN_USB_ID,
+	PM_VREG_PDOWN_MMC_ID,
+	PM_VREG_PDOWN_RUIM_ID,
+	PM_VREG_PDOWN_MSMC0_ID,	/* Supported in PM6610 only */
+	PM_VREG_PDOWN_GP2_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_GP5_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_GP6_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_RF_ID,
+	PM_VREG_PDOWN_RF_VCO_ID,
+	PM_VREG_PDOWN_MPLL_ID,
+	PM_VREG_PDOWN_S2_ID,
+	PM_VREG_PDOWN_S3_ID,
+	PM_VREG_PDOWN_RFUBM_ID,
+
+	/* new for HAN */
+	PM_VREG_PDOWN_RF1_ID,
+	PM_VREG_PDOWN_RF2_ID,
+	PM_VREG_PDOWN_RFA_ID,
+	PM_VREG_PDOWN_CDC2_ID,
+	PM_VREG_PDOWN_RFTX2_ID,
+	PM_VREG_PDOWN_USIM_ID,
+	PM_VREG_PDOWN_USB2P6_ID,
+	PM_VREG_PDOWN_USB3P3_ID,
+	PM_VREG_PDOWN_INVALID_ID,
+
+	/* backward compatible enums only */
+	PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID,
+	PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID,
+	PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID,
+	PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID,
+	PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID,
+	PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID,
+
+	PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID,
+	PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID,
+	PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID,
+	PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID,
+	PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID
+};
+
+/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */
+
+#define GPIO_ENABLE	0
+#define GPIO_DISABLE	1
+
+#define GPIO_INPUT	0
+#define GPIO_OUTPUT	1
+
+#define GPIO_NO_PULL	0
+#define GPIO_PULL_DOWN	1
+#define GPIO_KEEPER	2
+#define GPIO_PULL_UP	3
+
+#define GPIO_2MA	0
+#define GPIO_4MA	1
+#define GPIO_6MA	2
+#define GPIO_8MA	3
+#define GPIO_10MA	4
+#define GPIO_12MA	5
+#define GPIO_14MA	6
+#define GPIO_16MA	7
+
+#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \
+		((((gpio) & 0x3FF) << 4)	| \
+		((func) & 0xf)			| \
+		(((dir) & 0x1) << 14)		| \
+		(((pull) & 0x3) << 15)		| \
+		(((drvstr) & 0xF) << 17))
+
+int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2);
+
+#endif