diff options
author | Magnus Damm <magnus.damm@gmail.com> | 2008-02-14 04:52:43 (GMT) |
---|---|---|
committer | Paul Mundt <lethal@linux-sh.org> | 2008-02-14 05:25:32 (GMT) |
commit | e036eaa681a17f71b64f6d9040fe605555623919 (patch) | |
tree | 6fe462fe6106e830f39abd25f0e1a4f8aff3cb5c /arch/sh/drivers | |
parent | f99cb7a43c5cca1813a97312487acf7a0f88ee2a (diff) | |
download | linux-fsl-qoriq-e036eaa681a17f71b64f6d9040fe605555623919.tar.xz |
sh: use ctrl_in/out for on chip pci access
This patch makes sure ctrl_inN/outN are used instead of inN/outN for on chip
pci registers. Without this patch addresses may be adjusted using the value
in generic_io_base. This patch makes it possible to set generic_io_base and
have pci without reading and writing all over the place.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Katsuya MATSUBARA <matsu@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch/sh/drivers')
-rw-r--r-- | arch/sh/drivers/pci/fixups-lboxre2.c | 4 | ||||
-rw-r--r-- | arch/sh/drivers/pci/fixups-rts7751r2d.c | 4 | ||||
-rw-r--r-- | arch/sh/drivers/pci/ops-dreamcast.c | 44 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci-sh4.h | 4 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci-sh7751.c | 16 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci-sh7780.c | 2 |
6 files changed, 37 insertions, 37 deletions
diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c index 40b19bd..1c1d412 100644 --- a/arch/sh/drivers/pci/fixups-lboxre2.c +++ b/arch/sh/drivers/pci/fixups-lboxre2.c @@ -18,7 +18,7 @@ int pci_fixup_pcic(void) { unsigned long bcr1, mcr; - bcr1 = inl(SH7751_BCR1); + bcr1 = ctrl_inl(SH7751_BCR1); bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ pci_write_reg(bcr1, SH4_PCIBCR1); @@ -28,7 +28,7 @@ int pci_fixup_pcic(void) pci_write_reg(0xfb900047, SH7751_PCICONF1); pci_write_reg(0xab000001, SH7751_PCICONF4); - mcr = inl(SH7751_MCR); + mcr = ctrl_inl(SH7751_MCR); mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; pci_write_reg(mcr, SH4_PCIMCR); diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c index e72ceb5..904bce8 100644 --- a/arch/sh/drivers/pci/fixups-rts7751r2d.c +++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c @@ -19,7 +19,7 @@ int pci_fixup_pcic(void) { unsigned long bcr1, mcr; - bcr1 = inl(SH7751_BCR1); + bcr1 = ctrl_inl(SH7751_BCR1); bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ pci_write_reg(bcr1, SH4_PCIBCR1); @@ -30,7 +30,7 @@ int pci_fixup_pcic(void) pci_write_reg(0xfb900047, SH7751_PCICONF1); pci_write_reg(0xab000001, SH7751_PCICONF4); - mcr = inl(SH7751_MCR); + mcr = ctrl_inl(SH7751_MCR); mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; pci_write_reg(mcr, SH4_PCIMCR); diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index e1284fc..0dac87b 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -83,9 +83,9 @@ static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int return PCIBIOS_DEVICE_NOT_FOUND; switch (size) { - case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break; - case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break; - case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break; + case 1: *val = ctrl_inb(GAPSPCI_BBA_CONFIG+where); break; + case 2: *val = ctrl_inw(GAPSPCI_BBA_CONFIG+where); break; + case 4: *val = ctrl_inl(GAPSPCI_BBA_CONFIG+where); break; } return PCIBIOS_SUCCESSFUL; @@ -97,9 +97,9 @@ static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int return PCIBIOS_DEVICE_NOT_FOUND; switch (size) { - case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break; - case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break; - case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break; + case 1: ctrl_outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break; + case 2: ctrl_outw((u16)val, GAPSPCI_BBA_CONFIG+where); break; + case 4: ctrl_outl((u32)val, GAPSPCI_BBA_CONFIG+where); break; } return PCIBIOS_SUCCESSFUL; @@ -127,36 +127,36 @@ int __init gapspci_init(void) */ for (i=0; i<16; i++) - idbuf[i] = inb(GAPSPCI_REGS+i); + idbuf[i] = ctrl_inb(GAPSPCI_REGS+i); if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16)) return -ENODEV; - outl(0x5a14a501, GAPSPCI_REGS+0x18); + ctrl_outl(0x5a14a501, GAPSPCI_REGS+0x18); for (i=0; i<1000000; i++) ; - if (inl(GAPSPCI_REGS+0x18) != 1) + if (ctrl_inl(GAPSPCI_REGS+0x18) != 1) return -EINVAL; - outl(0x01000000, GAPSPCI_REGS+0x20); - outl(0x01000000, GAPSPCI_REGS+0x24); + ctrl_outl(0x01000000, GAPSPCI_REGS+0x20); + ctrl_outl(0x01000000, GAPSPCI_REGS+0x24); - outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28); - outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c); + ctrl_outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28); + ctrl_outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c); - outl(1, GAPSPCI_REGS+0x14); - outl(1, GAPSPCI_REGS+0x34); + ctrl_outl(1, GAPSPCI_REGS+0x14); + ctrl_outl(1, GAPSPCI_REGS+0x34); /* Setting Broadband Adapter */ - outw(0xf900, GAPSPCI_BBA_CONFIG+0x06); - outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30); - outb(0x00, GAPSPCI_BBA_CONFIG+0x3c); - outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d); - outw(0x0006, GAPSPCI_BBA_CONFIG+0x04); - outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); - outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); + ctrl_outw(0xf900, GAPSPCI_BBA_CONFIG+0x06); + ctrl_outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30); + ctrl_outb(0x00, GAPSPCI_BBA_CONFIG+0x3c); + ctrl_outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d); + ctrl_outw(0x0006, GAPSPCI_BBA_CONFIG+0x04); + ctrl_outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); + ctrl_outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); return 0; } diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h index 4925c79..07e2950 100644 --- a/arch/sh/drivers/pci/pci-sh4.h +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -172,11 +172,11 @@ struct sh4_pci_address_map { static inline void pci_write_reg(unsigned long val, unsigned long reg) { - outl(val, PCI_REG(reg)); + ctrl_outl(val, PCI_REG(reg)); } static inline unsigned long pci_read_reg(unsigned long reg) { - return inl(PCI_REG(reg)); + return ctrl_inl(PCI_REG(reg)); } #endif /* __PCI_SH4_H */ diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 1aca7fe..3065eb184 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -58,7 +58,7 @@ static int __init __area_sdram_check(unsigned int area) { u32 word; - word = inl(SH7751_BCR1); + word = ctrl_inl(SH7751_BCR1); /* check BCR for SDRAM in area */ if (((word >> area) & 1) == 0) { printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n", @@ -67,7 +67,7 @@ static int __init __area_sdram_check(unsigned int area) } pci_write_reg(word, SH4_PCIBCR1); - word = (u16)inw(SH7751_BCR2); + word = (u16)ctrl_inw(SH7751_BCR2); /* check BCR2 for 32bit SDRAM interface*/ if (((word >> (area << 1)) & 0x3) != 0x3) { printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n", @@ -85,9 +85,9 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) u32 word; /* Set the BCR's to enable PCI access */ - reg = inl(SH7751_BCR1); + reg = ctrl_inl(SH7751_BCR1); reg |= 0x80000; - outl(reg, SH7751_BCR1); + ctrl_outl(reg, SH7751_BCR1); /* Turn the clocks back on (not done in reset)*/ pci_write_reg(0, SH4_PCICLKR); @@ -179,13 +179,13 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) return 0; /* configure the wait control registers */ - word = inl(SH7751_WCR1); + word = ctrl_inl(SH7751_WCR1); pci_write_reg(word, SH4_PCIWCR1); - word = inl(SH7751_WCR2); + word = ctrl_inl(SH7751_WCR2); pci_write_reg(word, SH4_PCIWCR2); - word = inl(SH7751_WCR3); + word = ctrl_inl(SH7751_WCR3); pci_write_reg(word, SH4_PCIWCR3); - word = inl(SH7751_MCR); + word = ctrl_inl(SH7751_MCR); pci_write_reg(word, SH4_PCIMCR); /* NOTE: I'm ignoring the PCI error IRQs for now.. diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 7d797f4de..b2a2bfa 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -52,7 +52,7 @@ static int __init sh7780_pci_init(void) pr_debug("PCI: Starting intialization.\n"); - outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ + ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ /* check for SH7780/SH7780R hardware */ id = pci_read_reg(SH7780_PCIVID); |