Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (217 commits)
  net/ieee80211: fix more crypto-related build breakage
  [PATCH] Spidernet: add ethtool -S (show statistics)
  [NET] GT96100: Delete bitrotting ethernet driver
  [PATCH] mv643xx_eth: restrict to 32-bit PPC_MULTIPLATFORM
  [PATCH] Cirrus Logic ep93xx ethernet driver
  r8169: the MMIO region of the 8167 stands behin BAR#1
  e1000, ixgb: Remove pointless wrappers
  [PATCH] Remove powerpc specific parts of 3c509 driver
  [PATCH] s2io: Switch to pci_get_device
  [PATCH] gt96100: move to pci_get_device API
  [PATCH] ehea: bugfix for register access functions
  [PATCH] e1000 disable device on PCI error
  drivers/net/phy/fixed: #if 0 some incomplete code
  drivers/net: const-ify ethtool_ops declarations
  [PATCH] ethtool: allow const ethtool_ops
  [PATCH] sky2: big endian
  [PATCH] sky2: fiber support
  [PATCH] sky2: tx pause bug fix
  drivers/net: Trim trailing whitespace
  [PATCH] ehea: IBM eHEA Ethernet Device Driver
  ...

Manually resolved conflicts in drivers/net/ixgb/ixgb_main.c and
drivers/net/sky2.c related to CHECKSUM_HW/CHECKSUM_PARTIAL changes by
commit 84fa7933a33f806bbbaae6775e87459b1ec584c0 that just happened to be
next to unrelated changes in this update.

1 files changed, 42 insertions, 5 deletions

diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h
index 0a6cae6..9519ae7 100644
--- a/drivers/net/myri10ge/myri10ge_mcp.h
+++ b/drivers/net/myri10ge/myri10ge_mcp.h
@@ -91,7 +91,19 @@ struct mcp_kreq_ether_recv {
 
 /* Commands */
 
-#define MXGEFW_CMD_OFFSET 0xf80000
+#define	MXGEFW_BOOT_HANDOFF	0xfc0000
+#define	MXGEFW_BOOT_DUMMY_RDMA	0xfc01c0
+
+#define	MXGEFW_ETH_CMD		0xf80000
+#define	MXGEFW_ETH_SEND_4	0x200000
+#define	MXGEFW_ETH_SEND_1	0x240000
+#define	MXGEFW_ETH_SEND_2	0x280000
+#define	MXGEFW_ETH_SEND_3	0x2c0000
+#define	MXGEFW_ETH_RECV_SMALL	0x300000
+#define	MXGEFW_ETH_RECV_BIG	0x340000
+
+#define	MXGEFW_ETH_SEND(n)		(0x200000 + (((n) & 0x03) * 0x40000))
+#define	MXGEFW_ETH_SEND_OFFSET(n)	(MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4)
 
 enum myri10ge_mcp_cmd_type {
 	MXGEFW_CMD_NONE = 0,
@@ -154,7 +166,7 @@ enum myri10ge_mcp_cmd_type {
 	MXGEFW_CMD_SET_MTU,
 	MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET,	/* in microseconds */
 	MXGEFW_CMD_SET_STATS_INTERVAL,	/* in microseconds */
-	MXGEFW_CMD_SET_STATS_DMA,
+	MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,	/* replaced by SET_STATS_DMA_V2 */
 
 	MXGEFW_ENABLE_PROMISC,
 	MXGEFW_DISABLE_PROMISC,
@@ -168,7 +180,26 @@ enum myri10ge_mcp_cmd_type {
 	 * data2       = RDMA length (MSH), WDMA length (LSH)
 	 * command return data = repetitions (MSH), 0.5-ms ticks (LSH)
 	 */
-	MXGEFW_DMA_TEST
+	MXGEFW_DMA_TEST,
+
+	MXGEFW_ENABLE_ALLMULTI,
+	MXGEFW_DISABLE_ALLMULTI,
+
+	/* returns MXGEFW_CMD_ERROR_MULTICAST
+	 * if there is no room in the cache
+	 * data0,MSH(data1) = multicast group address */
+	MXGEFW_JOIN_MULTICAST_GROUP,
+	/* returns MXGEFW_CMD_ERROR_MULTICAST
+	 * if the address is not in the cache,
+	 * or is equal to FF-FF-FF-FF-FF-FF
+	 * data0,MSH(data1) = multicast group address */
+	MXGEFW_LEAVE_MULTICAST_GROUP,
+	MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
+
+	MXGEFW_CMD_SET_STATS_DMA_V2,
+	/* data0, data1 = bus addr,
+	 * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
+	 * adding new stuff to mcp_irq_data without changing the ABI */
 };
 
 enum myri10ge_mcp_cmd_status {
@@ -180,11 +211,17 @@ enum myri10ge_mcp_cmd_status {
 	MXGEFW_CMD_ERROR_CLOSED,
 	MXGEFW_CMD_ERROR_HASH_ERROR,
 	MXGEFW_CMD_ERROR_BAD_PORT,
-	MXGEFW_CMD_ERROR_RESOURCES
+	MXGEFW_CMD_ERROR_RESOURCES,
+	MXGEFW_CMD_ERROR_MULTICAST
 };
 
-/* 40 Bytes */
+#define MXGEFW_OLD_IRQ_DATA_LEN 40
+
 struct mcp_irq_data {
+	/* add new counters at the beginning */
+	u32 future_use[5];
+	u32 dropped_multicast_filtered;
+	/* 40 Bytes */
 	u32 send_done_count;
 
 	u32 link_up;