diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-11-04 04:05:43 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-11-04 04:05:43 (GMT) |
commit | 6dbbd92522a13bcd5003829cbed30bc38a3d0362 (patch) | |
tree | b486642d7392b81d89f159d65fd556a432e78d16 /drivers/net | |
parent | d6748066ad0e8b2514545998f8367ebb3906f299 (diff) | |
parent | e1cfb67acd5e890bbad695000d2c997bfb7f1756 (diff) | |
download | linux-fsl-qoriq-6dbbd92522a13bcd5003829cbed30bc38a3d0362.tar.xz |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits)
be2net: Add detect UE feature for Lancer
be2net: Prevent CQ full condition for Lancer
be2net: Fix disabling multicast promiscous mode
be2net: Fix endian issue in RX filter command
af_packet: de-inline some helper functions
MAINTAINERS: Add can-gw include to maintained files
net: Add back alignment for size for __alloc_skb
net: add missing bh_unlock_sock() calls
l2tp: fix race in l2tp_recv_dequeue()
ixgbevf: Update release version
ixgbe: DCB, return max for IEEE traffic classes
ixgbe: fix reading of the buffer returned by the firmware
ixgbe: Fix compiler warnings
ixgbe: fix smatch splat due to missing NULL check
ixgbe: fix disabling of Tx laser at probe
ixgbe: Fix link issues caused by a reset while interface is down
igb: Fix for I347AT4 PHY cable length unit detection
e100: make sure vlan support isn't advertised on old adapters
e1000e: demote a debugging WARN to a debug log message
net: fix typo in drivers/net/ethernet/xilinx/ll_temac_main.c
...
Diffstat (limited to 'drivers/net')
27 files changed, 179 insertions, 132 deletions
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index c34cc1e..b2b9109 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -550,7 +550,7 @@ down: /* * Get link speed and duplex from the slave's base driver * using ethtool. If for some reason the call fails or the - * values are invalid, fake speed and duplex to 100/Full + * values are invalid, set speed and duplex to -1, * and return error. */ static int bond_update_speed_duplex(struct slave *slave) @@ -560,9 +560,8 @@ static int bond_update_speed_duplex(struct slave *slave) u32 slave_speed; int res; - /* Fake speed and duplex */ - slave->speed = SPEED_100; - slave->duplex = DUPLEX_FULL; + slave->speed = -1; + slave->duplex = -1; res = __ethtool_get_settings(slave_dev, &ecmd); if (res < 0) @@ -1751,16 +1750,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) new_slave->link = BOND_LINK_DOWN; } - if (bond_update_speed_duplex(new_slave) && - (new_slave->link != BOND_LINK_DOWN)) { - pr_warning("%s: Warning: failed to get speed and duplex from %s, assumed to be 100Mb/sec and Full.\n", - bond_dev->name, new_slave->dev->name); - - if (bond->params.mode == BOND_MODE_8023AD) { - pr_warning("%s: Warning: Operation of 802.3ad mode requires ETHTOOL support in base driver for proper aggregator selection.\n", - bond_dev->name); - } - } + bond_update_speed_duplex(new_slave); if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) { /* if there is a primary slave, remember it */ @@ -3220,6 +3210,7 @@ static int bond_slave_netdev_event(unsigned long event, { struct net_device *bond_dev = slave_dev->master; struct bonding *bond = netdev_priv(bond_dev); + struct slave *slave = NULL; switch (event) { case NETDEV_UNREGISTER: @@ -3230,20 +3221,16 @@ static int bond_slave_netdev_event(unsigned long event, bond_release(bond_dev, slave_dev); } break; + case NETDEV_UP: case NETDEV_CHANGE: - if (bond->params.mode == BOND_MODE_8023AD || bond_is_lb(bond)) { - struct slave *slave; + slave = bond_get_slave_by_dev(bond, slave_dev); + if (slave) { + u32 old_speed = slave->speed; + u8 old_duplex = slave->duplex; - slave = bond_get_slave_by_dev(bond, slave_dev); - if (slave) { - u32 old_speed = slave->speed; - u8 old_duplex = slave->duplex; - - bond_update_speed_duplex(slave); - - if (bond_is_lb(bond)) - break; + bond_update_speed_duplex(slave); + if (bond->params.mode == BOND_MODE_8023AD) { if (old_speed != slave->speed) bond_3ad_adapter_speed_changed(slave); if (old_duplex != slave->duplex) diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c index 95de93b..d2ff52e 100644 --- a/drivers/net/bonding/bond_procfs.c +++ b/drivers/net/bonding/bond_procfs.c @@ -157,8 +157,16 @@ static void bond_info_show_slave(struct seq_file *seq, seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name); seq_printf(seq, "MII Status: %s\n", (slave->link == BOND_LINK_UP) ? "up" : "down"); - seq_printf(seq, "Speed: %d Mbps\n", slave->speed); - seq_printf(seq, "Duplex: %s\n", slave->duplex ? "full" : "half"); + if (slave->speed == -1) + seq_printf(seq, "Speed: %s\n", "Unknown"); + else + seq_printf(seq, "Speed: %d Mbps\n", slave->speed); + + if (slave->duplex == -1) + seq_printf(seq, "Duplex: %s\n", "Unknown"); + else + seq_printf(seq, "Duplex: %s\n", slave->duplex ? "full" : "half"); + seq_printf(seq, "Link Failure Count: %u\n", slave->link_failure_count); diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 6dff5a0..597f4d4 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -159,6 +159,7 @@ config S6GMAC will be called s6gmac. source "drivers/net/ethernet/seeq/Kconfig" +source "drivers/net/ethernet/silan/Kconfig" source "drivers/net/ethernet/sis/Kconfig" source "drivers/net/ethernet/sfc/Kconfig" source "drivers/net/ethernet/sgi/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index c53ad3a..be5dde0 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_SH_ETH) += renesas/ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ obj-$(CONFIG_S6GMAC) += s6gmac.o obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/ +obj-$(CONFIG_NET_VENDOR_SILAN) += silan/ obj-$(CONFIG_NET_VENDOR_SIS) += sis/ obj-$(CONFIG_SFC) += sfc/ obj-$(CONFIG_NET_VENDOR_SGI) += sgi/ diff --git a/drivers/net/ethernet/apple/Kconfig b/drivers/net/ethernet/apple/Kconfig index a759d54..1375e2d 100644 --- a/drivers/net/ethernet/apple/Kconfig +++ b/drivers/net/ethernet/apple/Kconfig @@ -52,18 +52,6 @@ config BMAC To compile this driver as a module, choose M here: the module will be called bmac. -config MAC89x0 - tristate "Macintosh CS89x0 based ethernet cards" - depends on MAC - ---help--- - Support for CS89x0 chipset based Ethernet cards. If you have a - Nubus or LC-PDS network (Ethernet) card of this type, say Y and - read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. This module will - be called mac89x0. - config MACMACE bool "Macintosh (AV) onboard MACE ethernet" depends on MAC diff --git a/drivers/net/ethernet/apple/Makefile b/drivers/net/ethernet/apple/Makefile index 0d3a591..86eaa17 100644 --- a/drivers/net/ethernet/apple/Makefile +++ b/drivers/net/ethernet/apple/Makefile @@ -4,5 +4,4 @@ obj-$(CONFIG_MACE) += mace.o obj-$(CONFIG_BMAC) += bmac.o -obj-$(CONFIG_MAC89x0) += mac89x0.o obj-$(CONFIG_MACMACE) += macmace.o diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig index 6cbb81c..1f8648f 100644 --- a/drivers/net/ethernet/cirrus/Kconfig +++ b/drivers/net/ethernet/cirrus/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_CIRRUS bool "Cirrus devices" default y depends on ISA || EISA || MACH_IXDP2351 || ARCH_IXDP2X01 \ - || MACH_MX31ADS || MACH_QQ2440 || (ARM && ARCH_EP93XX) + || MACH_MX31ADS || MACH_QQ2440 || (ARM && ARCH_EP93XX) || MAC ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -47,4 +47,16 @@ config EP93XX_ETH This is a driver for the ethernet hardware included in EP93xx CPUs. Say Y if you are building a kernel for EP93xx based devices. +config MAC89x0 + tristate "Macintosh CS89x0 based ethernet cards" + depends on MAC + ---help--- + Support for CS89x0 chipset based Ethernet cards. If you have a + Nubus or LC-PDS network (Ethernet) card of this type, say Y and + read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. This module will + be called mac89x0. + endif # NET_VENDOR_CIRRUS diff --git a/drivers/net/ethernet/cirrus/Makefile b/drivers/net/ethernet/cirrus/Makefile index 14bd77e..ca245e2 100644 --- a/drivers/net/ethernet/cirrus/Makefile +++ b/drivers/net/ethernet/cirrus/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_CS89x0) += cs89x0.o obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o +obj-$(CONFIG_MAC89x0) += mac89x0.o diff --git a/drivers/net/ethernet/apple/mac89x0.c b/drivers/net/ethernet/cirrus/mac89x0.c index 83781f3..83781f3 100644 --- a/drivers/net/ethernet/apple/mac89x0.c +++ b/drivers/net/ethernet/cirrus/mac89x0.c diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 824b8e6..2c7b366 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -318,8 +318,7 @@ static int be_mbox_db_ready_wait(struct be_adapter *adapter, void __iomem *db) if (msecs > 4000) { dev_err(&adapter->pdev->dev, "mbox poll timed out\n"); - if (!lancer_chip(adapter)) - be_detect_dump_ue(adapter); + be_detect_dump_ue(adapter); return -1; } @@ -1540,7 +1539,14 @@ int be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 value) req->if_flags_mask = req->if_flags = cpu_to_le32(BE_IF_FLAGS_MULTICAST); - req->mcast_num = cpu_to_le16(netdev_mc_count(adapter->netdev)); + + /* Reset mcast promisc mode if already set by setting mask + * and not setting flags field + */ + req->if_flags_mask |= + cpu_to_le32(BE_IF_FLAGS_MCAST_PROMISCUOUS); + + req->mcast_num = cpu_to_le32(netdev_mc_count(adapter->netdev)); netdev_for_each_mc_addr(ha, adapter->netdev) memcpy(req->mcast_mac[i++].byte, ha->addr, ETH_ALEN); } diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h index fbc8a91..f2c89e3 100644 --- a/drivers/net/ethernet/emulex/benet/be_hw.h +++ b/drivers/net/ethernet/emulex/benet/be_hw.h @@ -48,6 +48,8 @@ /* Lancer SLIPORT_CONTROL SLIPORT_STATUS registers */ #define SLIPORT_STATUS_OFFSET 0x404 #define SLIPORT_CONTROL_OFFSET 0x408 +#define SLIPORT_ERROR1_OFFSET 0x40C +#define SLIPORT_ERROR2_OFFSET 0x410 #define SLIPORT_STATUS_ERR_MASK 0x80000000 #define SLIPORT_STATUS_RN_MASK 0x01000000 diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 2180497..e0aed18 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1905,6 +1905,8 @@ loop_continue: be_rx_stats_update(rxo, rxcp); } + be_cq_notify(adapter, rx_cq->id, false, work_done); + /* Refill the queue */ if (work_done && atomic_read(&rxo->q.used) < RX_FRAGS_REFILL_WM) be_post_rx_frags(rxo, GFP_ATOMIC); @@ -1912,10 +1914,8 @@ loop_continue: /* All consumed */ if (work_done < budget) { napi_complete(napi); - be_cq_notify(adapter, rx_cq->id, true, work_done); - } else { - /* More to be consumed; continue with interrupts disabled */ - be_cq_notify(adapter, rx_cq->id, false, work_done); + /* Arm CQ */ + be_cq_notify(adapter, rx_cq->id, true, 0); } return work_done; } @@ -1977,42 +1977,62 @@ static int be_poll_tx_mcc(struct napi_struct *napi, int budget) void be_detect_dump_ue(struct be_adapter *adapter) { - u32 ue_status_lo, ue_status_hi, ue_status_lo_mask, ue_status_hi_mask; + u32 ue_lo = 0, ue_hi = 0, ue_lo_mask = 0, ue_hi_mask = 0; + u32 sliport_status = 0, sliport_err1 = 0, sliport_err2 = 0; u32 i; - pci_read_config_dword(adapter->pdev, - PCICFG_UE_STATUS_LOW, &ue_status_lo); - pci_read_config_dword(adapter->pdev, - PCICFG_UE_STATUS_HIGH, &ue_status_hi); - pci_read_config_dword(adapter->pdev, - PCICFG_UE_STATUS_LOW_MASK, &ue_status_lo_mask); - pci_read_config_dword(adapter->pdev, - PCICFG_UE_STATUS_HI_MASK, &ue_status_hi_mask); + if (lancer_chip(adapter)) { + sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET); + if (sliport_status & SLIPORT_STATUS_ERR_MASK) { + sliport_err1 = ioread32(adapter->db + + SLIPORT_ERROR1_OFFSET); + sliport_err2 = ioread32(adapter->db + + SLIPORT_ERROR2_OFFSET); + } + } else { + pci_read_config_dword(adapter->pdev, + PCICFG_UE_STATUS_LOW, &ue_lo); + pci_read_config_dword(adapter->pdev, + PCICFG_UE_STATUS_HIGH, &ue_hi); + pci_read_config_dword(adapter->pdev, + PCICFG_UE_STATUS_LOW_MASK, &ue_lo_mask); + pci_read_config_dword(adapter->pdev, + PCICFG_UE_STATUS_HI_MASK, &ue_hi_mask); - ue_status_lo = (ue_status_lo & (~ue_status_lo_mask)); - ue_status_hi = (ue_status_hi & (~ue_status_hi_mask)); + ue_lo = (ue_lo & (~ue_lo_mask)); + ue_hi = (ue_hi & (~ue_hi_mask)); + } - if (ue_status_lo || ue_status_hi) { + if (ue_lo || ue_hi || + sliport_status & SLIPORT_STATUS_ERR_MASK) { adapter->ue_detected = true; adapter->eeh_err = true; dev_err(&adapter->pdev->dev, "UE Detected!!\n"); } - if (ue_status_lo) { - for (i = 0; ue_status_lo; ue_status_lo >>= 1, i++) { - if (ue_status_lo & 1) + if (ue_lo) { + for (i = 0; ue_lo; ue_lo >>= 1, i++) { + if (ue_lo & 1) dev_err(&adapter->pdev->dev, "UE: %s bit set\n", ue_status_low_desc[i]); } } - if (ue_status_hi) { - for (i = 0; ue_status_hi; ue_status_hi >>= 1, i++) { - if (ue_status_hi & 1) + if (ue_hi) { + for (i = 0; ue_hi; ue_hi >>= 1, i++) { + if (ue_hi & 1) dev_err(&adapter->pdev->dev, "UE: %s bit set\n", ue_status_hi_desc[i]); } } + if (sliport_status & SLIPORT_STATUS_ERR_MASK) { + dev_err(&adapter->pdev->dev, + "sliport status 0x%x\n", sliport_status); + dev_err(&adapter->pdev->dev, + "sliport error1 0x%x\n", sliport_err1); + dev_err(&adapter->pdev->dev, + "sliport error2 0x%x\n", sliport_err2); + } } static void be_worker(struct work_struct *work) @@ -2022,7 +2042,7 @@ static void be_worker(struct work_struct *work) struct be_rx_obj *rxo; int i; - if (!adapter->ue_detected && !lancer_chip(adapter)) + if (!adapter->ue_detected) be_detect_dump_ue(adapter); /* when interrupts are not yet enabled, just reap any pending diff --git a/drivers/net/ethernet/i825xx/3c505.c b/drivers/net/ethernet/i825xx/3c505.c index 40e1a17..ba82a26 100644 --- a/drivers/net/ethernet/i825xx/3c505.c +++ b/drivers/net/ethernet/i825xx/3c505.c @@ -126,15 +126,13 @@ * *********************************************************/ -#define filename __FILE__ - #define timeout_msg "*** timeout at %s:%s (line %d) ***\n" #define TIMEOUT_MSG(lineno) \ - pr_notice(timeout_msg, filename, __func__, (lineno)) + pr_notice(timeout_msg, __FILE__, __func__, (lineno)) #define invalid_pcb_msg "*** invalid pcb length %d at %s:%s (line %d) ***\n" #define INVALID_PCB_MSG(len) \ - pr_notice(invalid_pcb_msg, (len), filename, __func__, __LINE__) + pr_notice(invalid_pcb_msg, (len), __FILE__, __func__, __LINE__) #define search_msg "%s: Looking for 3c505 adapter at address %#x..." diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index ae17cd1..5a2fdf7 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -2810,6 +2810,10 @@ static int __devinit e100_probe(struct pci_dev *pdev, e100_get_defaults(nic); + /* D100 MAC doesn't allow rx of vlan packets with normal MTU */ + if (nic->mac < mac_82558_D101_A4) + netdev->features |= NETIF_F_VLAN_CHALLENGED; + /* locks must be initialized before calling hw_reset */ spin_lock_init(&nic->cb_lock); spin_lock_init(&nic->cmd_lock); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 6a17c62..e2a80a2 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -866,8 +866,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) if (test_and_set_bit(__E1000_ACCESS_SHARED_RESOURCE, &hw->adapter->state)) { - WARN(1, "e1000e: %s: contention for Phy access\n", - hw->adapter->netdev->name); + e_dbg("contention for Phy access\n"); return -E1000_ERR_PHY; } diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index 7edf31e..b17d7c2 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -1687,7 +1687,7 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw) if (ret_val) goto out; - is_cm = !(phy_data & I347AT4_PCDC_CABLE_LENGTH_UNIT); + is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); /* Populate the phy structure with cable length in meters */ phy->min_cable_length = phy_data / (is_cm ? 100 : 1); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 834f044..f1365fe 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -3344,7 +3344,7 @@ static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length) static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, u32 length) { - u32 hicr, i; + u32 hicr, i, bi; u32 hdr_size = sizeof(struct ixgbe_hic_hdr); u8 buf_len, dword_len; @@ -3398,9 +3398,9 @@ static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, dword_len = hdr_size >> 2; /* first pull in the header so we know the buffer length */ - for (i = 0; i < dword_len; i++) { - buffer[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i); - le32_to_cpus(&buffer[i]); + for (bi = 0; bi < dword_len; bi++) { + buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi); + le32_to_cpus(&buffer[bi]); } /* If there is any thing in data position pull it in */ @@ -3414,12 +3414,14 @@ static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, goto out; } - /* Calculate length in DWORDs, add one for odd lengths */ - dword_len = (buf_len + 1) >> 2; + /* Calculate length in DWORDs, add 3 for odd lengths */ + dword_len = (buf_len + 3) >> 2; - /* Pull in the rest of the buffer (i is where we left off)*/ - for (; i < buf_len; i++) - buffer[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i); + /* Pull in the rest of the buffer (bi is where we left off)*/ + for (; bi <= dword_len; bi++) { + buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi); + le32_to_cpus(&buffer[bi]); + } out: return ret_val; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c index 3631d63..33b93ff 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -561,11 +561,12 @@ static int ixgbe_dcbnl_ieee_getets(struct net_device *dev, struct ixgbe_adapter *adapter = netdev_priv(dev); struct ieee_ets *my_ets = adapter->ixgbe_ieee_ets; + ets->ets_cap = adapter->dcb_cfg.num_tcs.pg_tcs; + /* No IEEE PFC settings available */ if (!my_ets) - return -EINVAL; + return 0; - ets->ets_cap = adapter->dcb_cfg.num_tcs.pg_tcs; ets->cbs = my_ets->cbs; memcpy(ets->tc_tx_bw, my_ets->tc_tx_bw, sizeof(ets->tc_tx_bw)); memcpy(ets->tc_rx_bw, my_ets->tc_rx_bw, sizeof(ets->tc_rx_bw)); @@ -621,11 +622,12 @@ static int ixgbe_dcbnl_ieee_getpfc(struct net_device *dev, struct ieee_pfc *my_pfc = adapter->ixgbe_ieee_pfc; int i; + pfc->pfc_cap = adapter->dcb_cfg.num_tcs.pfc_tcs; + /* No IEEE PFC settings available */ if (!my_pfc) - return -EINVAL; + return 0; - pfc->pfc_cap = adapter->dcb_cfg.num_tcs.pfc_tcs; pfc->pfc_en = my_pfc->pfc_en; pfc->mbc = my_pfc->mbc; pfc->delay = my_pfc->delay; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 09b8e88..8ef92d1 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -3345,34 +3345,25 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter) hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true); - /* reconfigure the hardware */ - if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) { #ifdef IXGBE_FCOE - if (adapter->netdev->features & NETIF_F_FCOE_MTU) - max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE); + if (adapter->netdev->features & NETIF_F_FCOE_MTU) + max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE); #endif + + /* reconfigure the hardware */ + if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) { ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame, DCB_TX_CONFIG); ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame, DCB_RX_CONFIG); ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg); - } else { - struct net_device *dev = adapter->netdev; - - if (adapter->ixgbe_ieee_ets) { - struct ieee_ets *ets = adapter->ixgbe_ieee_ets; - int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN; - - ixgbe_dcb_hw_ets(&adapter->hw, ets, max_frame); - } - - if (adapter->ixgbe_ieee_pfc) { - struct ieee_pfc *pfc = adapter->ixgbe_ieee_pfc; - u8 *prio_tc = adapter->ixgbe_ieee_ets->prio_tc; - - ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc->pfc_en, - prio_tc); - } + } else if (adapter->ixgbe_ieee_ets && adapter->ixgbe_ieee_pfc) { + ixgbe_dcb_hw_ets(&adapter->hw, + adapter->ixgbe_ieee_ets, + max_frame); + ixgbe_dcb_hw_pfc_config(&adapter->hw, + adapter->ixgbe_ieee_pfc->pfc_en, + adapter->ixgbe_ieee_ets->prio_tc); } /* Enable RSS Hash per TC */ @@ -6125,7 +6116,6 @@ static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) autoneg = hw->phy.autoneg_advertised; if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation); - hw->mac.autotry_restart = false; if (hw->mac.ops.setup_link) hw->mac.ops.setup_link(hw, autoneg, negotiation, true); @@ -7589,13 +7579,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, goto err_eeprom; } - /* power down the optics for multispeed fiber and 82599 SFP+ fiber */ - if (hw->mac.ops.disable_tx_laser && - ((hw->phy.multispeed_fiber) || - ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) && - (hw->mac.type == ixgbe_mac_82599EB)))) - hw->mac.ops.disable_tx_laser(hw); - setup_timer(&adapter->service_timer, &ixgbe_service_timer, (unsigned long) adapter); @@ -7693,6 +7676,13 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, if (err) goto err_register; + /* power down the optics for multispeed fiber and 82599 SFP+ fiber */ + if (hw->mac.ops.disable_tx_laser && + ((hw->phy.multispeed_fiber) || + ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) && + (hw->mac.type == ixgbe_mac_82599EB)))) + hw->mac.ops.disable_tx_laser(hw); + /* carrier off reporting is important to ethtool even BEFORE open */ netif_carrier_off(netdev); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h index 5a7e1eb..4a5d889 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h @@ -42,10 +42,12 @@ int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting); int ixgbe_ndo_get_vf_config(struct net_device *netdev, int vf, struct ifla_vf_info *ivi); void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter); +#ifdef CONFIG_PCI_IOV void ixgbe_disable_sriov(struct ixgbe_adapter *adapter); void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, const struct ixgbe_info *ii); int ixgbe_check_vf_assignment(struct ixgbe_adapter *adapter); +#endif #endif /* _IXGBE_SRIOV_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 5e92cc2..4c8e199 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -54,7 +54,7 @@ char ixgbevf_driver_name[] = "ixgbevf"; static const char ixgbevf_driver_string[] = "Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver"; -#define DRV_VERSION "2.1.0-k" +#define DRV_VERSION "2.2.0-k" const char ixgbevf_driver_version[] = DRV_VERSION; static char ixgbevf_copyright[] = "Copyright (c) 2009 - 2010 Intel Corporation."; diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig index 84083ec..0578859 100644 --- a/drivers/net/ethernet/realtek/Kconfig +++ b/drivers/net/ethernet/realtek/Kconfig @@ -115,16 +115,4 @@ config R8169 To compile this driver as a module, choose M here: the module will be called r8169. This is recommended. -config SC92031 - tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL - select CRC32 - ---help--- - This is a driver for the Fast Ethernet PCI network cards based on - the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you - have one of these, say Y here. - - To compile this driver as a module, choose M here: the module - will be called sc92031. This is recommended. - endif # NET_VENDOR_REALTEK diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile index e48cfb6..71b1da3 100644 --- a/drivers/net/ethernet/realtek/Makefile +++ b/drivers/net/ethernet/realtek/Makefile @@ -6,4 +6,3 @@ obj-$(CONFIG_8139CP) += 8139cp.o obj-$(CONFIG_8139TOO) += 8139too.o obj-$(CONFIG_ATP) += atp.o obj-$(CONFIG_R8169) += r8169.o -obj-$(CONFIG_SC92031) += sc92031.o diff --git a/drivers/net/ethernet/silan/Kconfig b/drivers/net/ethernet/silan/Kconfig new file mode 100644 index 0000000..ae1ce17 --- /dev/null +++ b/drivers/net/ethernet/silan/Kconfig @@ -0,0 +1,33 @@ +# +# Silan device configuration +# + +config NET_VENDOR_SILAN + bool "Silan devices" + default y + depends on PCI && EXPERIMENTAL + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Silan devices. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_SILAN + +config SC92031 + tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + ---help--- + This is a driver for the Fast Ethernet PCI network cards based on + the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you + have one of these, say Y here. + + To compile this driver as a module, choose M here: the module + will be called sc92031. This is recommended. + +endif # NET_VENDOR_SILAN diff --git a/drivers/net/ethernet/silan/Makefile b/drivers/net/ethernet/silan/Makefile new file mode 100644 index 0000000..4ad3523 --- /dev/null +++ b/drivers/net/ethernet/silan/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Silan network device drivers. +# + +obj-$(CONFIG_SC92031) += sc92031.o diff --git a/drivers/net/ethernet/realtek/sc92031.c b/drivers/net/ethernet/silan/sc92031.c index a284d64..a284d64 100644 --- a/drivers/net/ethernet/realtek/sc92031.c +++ b/drivers/net/ethernet/silan/sc92031.c diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index 4d1658e..caf3659 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -716,8 +716,8 @@ static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev) cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; cur_p->phys = dma_map_single(ndev->dev.parent, skb_frag_address(frag), - frag_size(frag), DMA_TO_DEVICE); - cur_p->len = frag_size(frag); + skb_frag_size(frag), DMA_TO_DEVICE); + cur_p->len = skb_frag_size(frag); cur_p->app0 = 0; frag++; } |