diff options
author | Greg Kroah-Hartman <gregkh@suse.de> | 2010-03-04 16:39:02 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2010-03-04 16:39:02 (GMT) |
commit | f341dddf1dadf64be309791f83d7904245f1261d (patch) | |
tree | 974c9e1f23da6743532162fd86cf019da497eaff /drivers/staging/rtl8187se/r8180_core.c | |
parent | eaa5eec739637f32f8733d528ff0b94fd62b1214 (diff) | |
parent | b02957d58a27525499ab10d272d3b44682a7ae50 (diff) | |
download | linux-fsl-qoriq-f341dddf1dadf64be309791f83d7904245f1261d.tar.xz |
Staging: merge staging patches into Linus's main branch
There were a number of patches that went into Linus's
tree already that conflicted with other changes in the
staging branch. This merge resolves those merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging/rtl8187se/r8180_core.c')
-rw-r--r-- | drivers/staging/rtl8187se/r8180_core.c | 502 |
1 files changed, 176 insertions, 326 deletions
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index 1847f38..b1757ac 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -31,6 +31,7 @@ #undef DUMMY_RX #include <linux/syscalls.h> +#include <linux/eeprom_93cx6.h> #include "r8180_hw.h" #include "r8180.h" @@ -41,13 +42,6 @@ #include "ieee80211/dot11d.h" -#ifndef PCI_VENDOR_ID_BELKIN - #define PCI_VENDOR_ID_BELKIN 0x1799 -#endif -#ifndef PCI_VENDOR_ID_DLINK - #define PCI_VENDOR_ID_DLINK 0x1186 -#endif - static struct pci_device_id rtl8180_pci_id_tbl[] __devinitdata = { { .vendor = PCI_VENDOR_ID_REALTEK, @@ -669,11 +663,8 @@ unsigned char STRENGTH_MAP[] = { void rtl8180_RSSI_calc(struct net_device *dev, u8 *rssi, u8 *qual) { - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); u32 temp; u32 temp2; - u32 temp3; - u32 lsb; u32 q; u32 orig_qual; u8 _rssi; @@ -695,88 +686,6 @@ void rtl8180_RSSI_calc(struct net_device *dev, u8 *rssi, u8 *qual) *qual = temp; temp2 = *rssi; - switch(priv->rf_chip){ - case RFCHIPID_RFMD: - lsb = temp2 & 1; - temp2 &= 0x7e; - if ( !lsb || !(temp2 <= 0x3c) ) { - temp2 = 0x64; - } else { - temp2 = 100 * temp2 / 0x3c; - } - *rssi = temp2 & 0xff; - _rssi = temp2 & 0xff; - break; - case RFCHIPID_INTERSIL: - lsb = temp2; - temp2 &= 0xfffffffe; - temp2 *= 251; - temp3 = temp2; - temp2 <<= 6; - temp3 += temp2; - temp3 <<= 1; - temp2 = 0x4950df; - temp2 -= temp3; - lsb &= 1; - if ( temp2 <= 0x3e0000 ) { - if ( temp2 < 0xffef0000 ) - temp2 = 0xffef0000; - } else { - temp2 = 0x3e0000; - } - if ( !lsb ) { - temp2 -= 0xf0000; - } else { - temp2 += 0xf0000; - } - - temp3 = 0x4d0000; - temp3 -= temp2; - temp3 *= 100; - temp3 = temp3 / 0x6d; - temp3 >>= 0x10; - _rssi = temp3 & 0xff; - *rssi = temp3 & 0xff; - break; - case RFCHIPID_GCT: - lsb = temp2 & 1; - temp2 &= 0x7e; - if ( ! lsb || !(temp2 <= 0x3c) ){ - temp2 = 0x64; - } else { - temp2 = (100 * temp2) / 0x3c; - } - *rssi = temp2 & 0xff; - _rssi = temp2 & 0xff; - break; - case RFCHIPID_PHILIPS: - if( orig_qual <= 0x4e ){ - _rssi = STRENGTH_MAP[orig_qual]; - *rssi = _rssi; - } else { - orig_qual -= 0x80; - if ( !orig_qual ){ - _rssi = 1; - *rssi = 1; - } else { - _rssi = 0x32; - *rssi = 0x32; - } - } - break; - case RFCHIPID_MAXIM: - lsb = temp2 & 1; - temp2 &= 0x7e; - temp2 >>= 1; - temp2 += 0x42; - if( lsb != 0 ){ - temp2 += 0xa; - } - *rssi = temp2 & 0xff; - _rssi = temp2 & 0xff; - break; - } - if ( _rssi < 0x64 ){ if ( _rssi == 0 ) { *rssi = 1; @@ -1421,11 +1330,9 @@ u16 N_DBPSOfRate(u16 DataRate) return N_DBPS; } -//{by amy 080312 // // Description: // For Netgear case, they want good-looking singal strength. -// 2004.12.05, by rcnjko. // long NetgearSignalStrengthTranslate(long LastSS, long CurrSS) { @@ -1481,7 +1388,6 @@ long TranslateToDbm8185(u8 SignalStrengthIndex) // This is different with PerformSignalSmoothing8185 in smoothing fomula. // No dramatic adjustion is apply because dynamic mechanism need some degree // of correctness. Ported from 8187B. -// 2007-02-26, by Bruce. // void PerformUndecoratedSignalSmoothing8185(struct r8180_priv *priv, bool bCckRate) @@ -1502,7 +1408,6 @@ void PerformUndecoratedSignalSmoothing8185(struct r8180_priv *priv, priv->CurCCKRSSI = 0; } -//by amy 080312} /* This is rough RX isr handling routine*/ void rtl8180_rx(struct net_device *dev) @@ -1638,7 +1543,7 @@ void rtl8180_rx(struct net_device *dev) } signal=(unsigned char)(((*(priv->rxringtail+3))& (0x00ff0000))>>16); - signal=(signal&0xfe)>>1; // Modify by hikaru 6.6 + signal = (signal & 0xfe) >> 1; quality=(unsigned char)((*(priv->rxringtail+3)) & (0xff)); @@ -1652,7 +1557,6 @@ void rtl8180_rx(struct net_device *dev) stats.rate = rtl8180_rate2rate(rate); Antenna = (((*(priv->rxringtail +3))& (0x00008000)) == 0 )? 0:1 ; -//by amy for antenna if(!rtl8180_IsWirelessBMode(stats.rate)) { // OFDM rate. @@ -1691,11 +1595,10 @@ void rtl8180_rx(struct net_device *dev) RXAGC=(95-RXAGC)*100/65; } priv->SignalStrength = (u8)RXAGC; - priv->RecvSignalPower = RxAGC_dBm ; // It can use directly by SD3 CMLin + priv->RecvSignalPower = RxAGC_dBm; priv->RxPower = rxpower; priv->RSSI = RSSI; -//{by amy 080312 - // SQ translation formular is provided by SD3 DZ. 2006.06.27, by rcnjko. + /* SQ translation formula is provided by SD3 DZ. 2006.06.27 */ if(quality >= 127) quality = 1;//0; //0 will cause epc to show signal zero , walk aroud now; else if(quality < 27) @@ -1712,7 +1615,6 @@ void rtl8180_rx(struct net_device *dev) // printk("==========================>rx : RXAGC is %d,signalstrength is %d\n",RXAGC,stats.signalstrength); stats.rssi = priv->wstats.qual.qual = priv->SignalQuality; stats.noise = priv->wstats.qual.noise = 100 - priv ->wstats.qual.qual; -//by amy 080312} bHwError = (((*(priv->rxringtail))& (0x00000fff)) == 4080)| (((*(priv->rxringtail))& (0x04000000)) != 0 ) | (((*(priv->rxringtail))& (0x08000000)) != 0 )| (((~(*(priv->rxringtail)))& (0x10000000)) != 0 )| (((~(*(priv->rxringtail)))& (0x20000000)) != 0 ); bCRC = ((*(priv->rxringtail)) & (0x00002000)) >> 13; @@ -1725,11 +1627,12 @@ void rtl8180_rx(struct net_device *dev) (eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3)) && (!bHwError) && (!bCRC)&& (!bICV)) { -//by amy 080312 - // Perform signal smoothing for dynamic mechanism on demand. - // This is different with PerformSignalSmoothing8185 in smoothing fomula. - // No dramatic adjustion is apply because dynamic mechanism need some degree - // of correctness. 2007.01.23, by shien chang. + /* Perform signal smoothing for dynamic + * mechanism on demand. This is different + * with PerformSignalSmoothing8185 in smoothing + * fomula. No dramatic adjustion is apply + * because dynamic mechanism need some degree + * of correctness. */ PerformUndecoratedSignalSmoothing8185(priv,bCckRate); // // For good-looking singal strength. @@ -1749,12 +1652,9 @@ void rtl8180_rx(struct net_device *dev) // Figure out which antenna that received the lasted packet. priv->LastRxPktAntenna = Antenna ? 1 : 0; // 0: aux, 1: main. -//by amy 080312 SwAntennaDiversityRxOk8185(dev, priv->SignalStrength); } -//by amy for antenna -#ifndef DUMMY_RX if(first){ if(!priv->rx_skb_complete){ /* seems that HW sometimes fails to reiceve and @@ -1810,19 +1710,12 @@ void rtl8180_rx(struct net_device *dev) if(last && !priv->rx_skb_complete){ if(priv->rx_skb->len > 4) skb_trim(priv->rx_skb,priv->rx_skb->len-4); -#ifndef RX_DONT_PASS_UL if(!ieee80211_rtl_rx(priv->ieee80211, - priv->rx_skb, &stats)){ -#endif // RX_DONT_PASS_UL - + priv->rx_skb, &stats)) dev_kfree_skb_any(priv->rx_skb); -#ifndef RX_DONT_PASS_UL - } -#endif priv->rx_skb_complete=1; } -#endif //DUMMY_RX pci_dma_sync_single_for_device(priv->pdev, priv->rxbuffer->dma, priv->rxbuffersize * \ @@ -2056,7 +1949,7 @@ short rtl8180_tx(struct net_device *dev, u8* txbuf, int len, int priority, u16 RtsDur = 0; u16 ThisFrameTime = 0; u16 TxDescDuration = 0; - u8 ownbit_flag = false; //added by david woo for sync Tx, 2007.12.14 + u8 ownbit_flag = false; switch(priority) { case MANAGE_PRIORITY: @@ -2123,7 +2016,8 @@ short rtl8180_tx(struct net_device *dev, u8* txbuf, int len, int priority, //YJ,add,080828,for Keep alive priv->NumTxUnicast++; - // Figure out ACK rate according to BSS basic rate and Tx rate, 2006.03.08 by rcnjko. + /* Figure out ACK rate according to BSS basic rate + * and Tx rate. */ AckTime = ComputeTxTime(14, 10,0, 0); // AckCTSLng = 14 use 1M bps send if ( ((len + sCrcLng) > priv->rts) && priv->rts ) @@ -2206,7 +2100,7 @@ short rtl8180_tx(struct net_device *dev, u8* txbuf, int len, int priority, *tail |= (1<<15); /* no encrypt */ if(remain==len && !descfrag) { - ownbit_flag = false; //added by david woo,2007.12.14 + ownbit_flag = false; *tail = *tail| (1<<29) ; //fist segment of the packet *tail = *tail |(len); } else { @@ -2556,27 +2450,16 @@ void watch_dog_adaptive(unsigned long data) } // Tx High Power Mechanism. -#ifdef HIGH_POWER if(CheckHighPower((struct net_device *)data)) - { queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->tx_pw_wq); - } -#endif // Tx Power Tracking on 87SE. -#ifdef TX_TRACK - //if( priv->bTxPowerTrack ) //lzm mod 080826 - if( CheckTxPwrTracking((struct net_device *)data)); + if (CheckTxPwrTracking((struct net_device *)data)) TxPwrTracking87SE((struct net_device *)data); -#endif // Perform DIG immediately. -#ifdef SW_DIG if(CheckDig((struct net_device *)data) == true) - { queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->hw_dig_wq); - } -#endif rtl8180_watch_dog((struct net_device *)data); queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->GPIOChangeRFWorkItem); @@ -2675,6 +2558,36 @@ static void rtl8180_link_detect_init(plink_detect_t plink_detect) } //YJ,add,080828,end +static void rtl8187se_eeprom_register_read(struct eeprom_93cx6 *eeprom) +{ + struct net_device *dev = eeprom->data; + u8 reg = read_nic_byte(dev, EPROM_CMD); + + eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE; + eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ; + eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK; + eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS; +} + +static void rtl8187se_eeprom_register_write(struct eeprom_93cx6 *eeprom) +{ + struct net_device *dev = eeprom->data; + u8 reg = 2 << 6; + + if (eeprom->reg_data_in) + reg |= RTL818X_EEPROM_CMD_WRITE; + if (eeprom->reg_data_out) + reg |= RTL818X_EEPROM_CMD_READ; + if (eeprom->reg_data_clock) + reg |= RTL818X_EEPROM_CMD_CK; + if (eeprom->reg_chip_select) + reg |= RTL818X_EEPROM_CMD_CS; + + write_nic_byte(dev, EPROM_CMD, reg); + read_nic_byte(dev, EPROM_CMD); + udelay(10); +} + short rtl8180_init(struct net_device *dev) { struct r8180_priv *priv = ieee80211_priv(dev); @@ -2683,8 +2596,16 @@ short rtl8180_init(struct net_device *dev) u32 usValue; u16 tmpu16; int i, j; + struct eeprom_93cx6 eeprom; + u16 eeprom_val; + + eeprom.data = dev; + eeprom.register_read = rtl8187se_eeprom_register_read; + eeprom.register_write = rtl8187se_eeprom_register_write; + eeprom.width = PCI_EEPROM_WIDTH_93C46; - priv->channel_plan = eprom_read(dev, EEPROM_COUNTRY_CODE>>1) & 0xFF; + eeprom_93cx6_read(&eeprom, EEPROM_COUNTRY_CODE>>1, &eeprom_val); + priv->channel_plan = eeprom_val & 0xFF; if(priv->channel_plan > COUNTRY_CODE_GLOBAL_DOMAIN){ printk("rtl8180_init:Error channel plan! Set to default.\n"); priv->channel_plan = 0; @@ -2701,8 +2622,6 @@ short rtl8180_init(struct net_device *dev) priv->txbeaconcount = 2; priv->rx_skb_complete = 1; - priv->RegThreeWireMode = HW_THREE_WIRE_SI; - priv->RFChangeInProgress = false; priv->SetRFPowerStateInProgress = false; priv->RFProgType = 0; @@ -2747,10 +2666,8 @@ short rtl8180_init(struct net_device *dev) priv->TxPollingTimes = 0;//lzm add 080826 priv->bLeisurePs = true; priv->dot11PowerSaveMode = eActive; -//by amy for antenna priv->AdMinCheckPeriod = 5; priv->AdMaxCheckPeriod = 10; -// Lower signal strength threshold to fit the HW participation in antenna diversity. +by amy 080312 priv->AdMaxRxSsThreshold = 30;//60->30 priv->AdRxSsThreshold = 20;//50->20 priv->AdCheckPeriod = priv->AdMinCheckPeriod; @@ -2765,8 +2682,6 @@ short rtl8180_init(struct net_device *dev) init_timer(&priv->SwAntennaDiversityTimer); priv->SwAntennaDiversityTimer.data = (unsigned long)dev; priv->SwAntennaDiversityTimer.function = (void *)SwAntennaDiversityTimerCallback; -//by amy for antenna -//{by amy 080312 priv->bDigMechanism = 1; priv->InitialGain = 6; priv->bXtalCalibration = false; @@ -2803,58 +2718,63 @@ short rtl8180_init(struct net_device *dev) priv->NumTxUnicast = 0; priv->keepAliveLevel = DEFAULT_KEEP_ALIVE_LEVEL; priv->PowerProfile = POWER_PROFILE_AC; - priv->CurrRetryCnt=0; - priv->LastRetryCnt=0; - priv->LastTxokCnt=0; - priv->LastRxokCnt=0; - priv->LastRetryRate=0; - priv->bTryuping=0; - priv->CurrTxRate=0; - priv->CurrRetryRate=0; - priv->TryupingCount=0; - priv->TryupingCountNoData=0; - priv->TryDownCountLowData=0; - priv->LastTxOKBytes=0; - priv->LastFailTxRate=0; - priv->LastFailTxRateSS=0; - priv->FailTxRateCount=0; - priv->LastTxThroughput=0; - priv->NumTxOkBytesTotal=0; + priv->CurrRetryCnt = 0; + priv->LastRetryCnt = 0; + priv->LastTxokCnt = 0; + priv->LastRxokCnt = 0; + priv->LastRetryRate = 0; + priv->bTryuping = 0; + priv->CurrTxRate = 0; + priv->CurrRetryRate = 0; + priv->TryupingCount = 0; + priv->TryupingCountNoData = 0; + priv->TryDownCountLowData = 0; + priv->LastTxOKBytes = 0; + priv->LastFailTxRate = 0; + priv->LastFailTxRateSS = 0; + priv->FailTxRateCount = 0; + priv->LastTxThroughput = 0; + priv->NumTxOkBytesTotal = 0; priv->ForcedDataRate = 0; priv->RegBModeGainStage = 1; - priv->promisc = (dev->flags & IFF_PROMISC) ? 1:0; + priv->promisc = (dev->flags & IFF_PROMISC) ? 1 : 0; spin_lock_init(&priv->irq_lock); spin_lock_init(&priv->irq_th_lock); spin_lock_init(&priv->tx_lock); spin_lock_init(&priv->ps_lock); spin_lock_init(&priv->rf_ps_lock); - sema_init(&priv->wx_sem,1); - sema_init(&priv->rf_state,1); - INIT_WORK(&priv->reset_wq,(void*) rtl8180_restart_wq); - INIT_WORK(&priv->tx_irq_wq,(void*) rtl8180_tx_irq_wq); - INIT_DELAYED_WORK(&priv->ieee80211->hw_wakeup_wq,(void*) rtl8180_hw_wakeup_wq); - INIT_DELAYED_WORK(&priv->ieee80211->hw_sleep_wq,(void*) rtl8180_hw_sleep_wq); - INIT_WORK(&priv->ieee80211->wmm_param_update_wq,(void*) rtl8180_wmm_param_update); - INIT_DELAYED_WORK(&priv->ieee80211->rate_adapter_wq,(void*)rtl8180_rate_adapter);//+by amy 080312 - INIT_DELAYED_WORK(&priv->ieee80211->hw_dig_wq,(void*)rtl8180_hw_dig_wq);//+by amy 080312 - INIT_DELAYED_WORK(&priv->ieee80211->tx_pw_wq,(void*)rtl8180_tx_pw_wq);//+by amy 080312 - - INIT_DELAYED_WORK(&priv->ieee80211->GPIOChangeRFWorkItem,(void*) GPIOChangeRFWorkItemCallBack); - + sema_init(&priv->wx_sem, 1); + sema_init(&priv->rf_state, 1); + INIT_WORK(&priv->reset_wq, (void *)rtl8180_restart_wq); + INIT_WORK(&priv->tx_irq_wq, (void *)rtl8180_tx_irq_wq); + INIT_DELAYED_WORK(&priv->ieee80211->hw_wakeup_wq, + (void *)rtl8180_hw_wakeup_wq); + INIT_DELAYED_WORK(&priv->ieee80211->hw_sleep_wq, + (void *)rtl8180_hw_sleep_wq); + INIT_WORK(&priv->ieee80211->wmm_param_update_wq, + (void *)rtl8180_wmm_param_update); + INIT_DELAYED_WORK(&priv->ieee80211->rate_adapter_wq, + (void *)rtl8180_rate_adapter); + INIT_DELAYED_WORK(&priv->ieee80211->hw_dig_wq, + (void *)rtl8180_hw_dig_wq); + INIT_DELAYED_WORK(&priv->ieee80211->tx_pw_wq, + (void *)rtl8180_tx_pw_wq); + INIT_DELAYED_WORK(&priv->ieee80211->GPIOChangeRFWorkItem, + (void *) GPIOChangeRFWorkItemCallBack); tasklet_init(&priv->irq_rx_tasklet, (void(*)(unsigned long)) rtl8180_irq_rx_tasklet, (unsigned long)priv); - init_timer(&priv->watch_dog_timer); + init_timer(&priv->watch_dog_timer); priv->watch_dog_timer.data = (unsigned long)dev; priv->watch_dog_timer.function = watch_dog_adaptive; - init_timer(&priv->rateadapter_timer); - priv->rateadapter_timer.data = (unsigned long)dev; - priv->rateadapter_timer.function = timer_rate_adaptive; - priv->RateAdaptivePeriod= RATE_ADAPTIVE_TIMER_PERIOD; - priv->bEnhanceTxPwr=false; + init_timer(&priv->rateadapter_timer); + priv->rateadapter_timer.data = (unsigned long)dev; + priv->rateadapter_timer.function = timer_rate_adaptive; + priv->RateAdaptivePeriod = RATE_ADAPTIVE_TIMER_PERIOD; + priv->bEnhanceTxPwr = false; priv->ieee80211->softmac_hard_start_xmit = rtl8180_hard_start_xmit; priv->ieee80211->set_chan = rtl8180_set_chan; @@ -2877,30 +2797,28 @@ short rtl8180_init(struct net_device *dev) priv->CSMethod = (0x01 << 29); - priv->TransmitConfig = - 1<<TCR_DurProcMode_OFFSET | //for RTL8185B, duration setting by HW - (7<<TCR_MXDMA_OFFSET) | // Max DMA Burst Size per Tx DMA Burst, 7: reservied. - (priv->ShortRetryLimit<<TCR_SRL_OFFSET) | // Short retry limit - (priv->LongRetryLimit<<TCR_LRL_OFFSET) | // Long retry limit - (0 ? TCR_SAT : 0); // FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them - - priv->ReceiveConfig = - RCR_AMF | RCR_ADF | //accept management/data - RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko. - RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC - (7<<RCR_MXDMA_OFFSET) | // Max DMA Burst Size per Rx DMA Burst, 7: unlimited. - (priv->EarlyRxThreshold<<RCR_FIFO_OFFSET) | // Rx FIFO Threshold, 7: No Rx threshold. - (priv->EarlyRxThreshold == 7 ? RCR_ONLYERLPKT:0); + priv->TransmitConfig = TCR_DurProcMode_OFFSET | + (7<<TCR_MXDMA_OFFSET) | + (priv->ShortRetryLimit<<TCR_SRL_OFFSET) | + (priv->LongRetryLimit<<TCR_LRL_OFFSET) | + (0 ? TCR_SAT : 0); + + priv->ReceiveConfig = RCR_AMF | RCR_ADF | RCR_ACF | + RCR_AB | RCR_AM | RCR_APM | + (7<<RCR_MXDMA_OFFSET) | + (priv->EarlyRxThreshold<<RCR_FIFO_OFFSET) | + (priv->EarlyRxThreshold == 7 ? + RCR_ONLYERLPKT : 0); priv->IntrMask = IMR_TMGDOK | IMR_TBDER | IMR_THPDER | - IMR_THPDER | IMR_THPDOK | - IMR_TVODER | IMR_TVODOK | - IMR_TVIDER | IMR_TVIDOK | - IMR_TBEDER | IMR_TBEDOK | - IMR_TBKDER | IMR_TBKDOK | - IMR_RDU | // To handle the defragmentation not enough Rx descriptors case. Annie, 2006-03-27. - IMR_RER | IMR_ROK | - IMR_RQoSOK; // <NOTE> ROK and RQoSOK are mutually exclusive, so, we must handle RQoSOK interrupt to receive QoS frames, 2005.12.09, by rcnjko. + IMR_THPDER | IMR_THPDOK | + IMR_TVODER | IMR_TVODOK | + IMR_TVIDER | IMR_TVIDOK | + IMR_TBEDER | IMR_TBEDOK | + IMR_TBKDER | IMR_TBKDOK | + IMR_RDU | + IMR_RER | IMR_ROK | + IMR_RQoSOK; priv->InitialGain = 6; @@ -2913,7 +2831,8 @@ short rtl8180_init(struct net_device *dev) // just for sync 85 priv->enable_gpio0 = 0; - usValue = eprom_read(dev, EEPROM_SW_REVD_OFFSET); + eeprom_93cx6_read(&eeprom, EEPROM_SW_REVD_OFFSET, &eeprom_val); + usValue = eeprom_val; DMESG("usValue is 0x%x\n",usValue); //3Read AntennaDiversity @@ -2953,54 +2872,46 @@ short rtl8180_init(struct net_device *dev) else priv->epromtype=EPROM_93c46; - dev->dev_addr[0]=eprom_read(dev,MAC_ADR) & 0xff; - dev->dev_addr[1]=(eprom_read(dev,MAC_ADR) & 0xff00)>>8; - dev->dev_addr[2]=eprom_read(dev,MAC_ADR+1) & 0xff; - dev->dev_addr[3]=(eprom_read(dev,MAC_ADR+1) & 0xff00)>>8; - dev->dev_addr[4]=eprom_read(dev,MAC_ADR+2) & 0xff; - dev->dev_addr[5]=(eprom_read(dev,MAC_ADR+2) & 0xff00)>>8; + eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *) + dev->dev_addr, 3); for(i=1,j=0; i<14; i+=2,j++){ - word = eprom_read(dev,EPROM_TXPW_CH1_2 + j); + eeprom_93cx6_read(&eeprom, EPROM_TXPW_CH1_2 + j, &word); priv->chtxpwr[i]=word & 0xff; priv->chtxpwr[i+1]=(word & 0xff00)>>8; } for (i = 1, j = 0; i < 14; i += 2, j++) { - word = eprom_read(dev, EPROM_TXPW_OFDM_CH1_2 + j); + eeprom_93cx6_read(&eeprom, EPROM_TXPW_OFDM_CH1_2 + j, &word); priv->chtxpwr_ofdm[i] = word & 0xff; - priv->chtxpwr_ofdm[i+1] = (word & 0xff00)>>8; + priv->chtxpwr_ofdm[i+1] = (word & 0xff00) >> 8; } - //3Read crystal calibtration and thermal meter indication on 87SE. - - // By SD3 SY's request. Added by Roger, 2007.12.11. + /* 3Read crystal calibtration and thermal meter indication on 87SE. */ + eeprom_93cx6_read(&eeprom, EEPROM_RSV>>1, &tmpu16); - tmpu16 = eprom_read(dev, EEPROM_RSV>>1); + /* Crystal calibration for Xin and Xout resp. */ + priv->XtalCal_Xout = tmpu16 & EEPROM_XTAL_CAL_XOUT_MASK; + priv->XtalCal_Xin = (tmpu16 & EEPROM_XTAL_CAL_XIN_MASK) >> 4; + if ((tmpu16 & EEPROM_XTAL_CAL_ENABLE) >> 12) + priv->bXtalCalibration = true; - // Crystal calibration for Xin and Xout resp. - priv->XtalCal_Xout = tmpu16 & EEPROM_XTAL_CAL_XOUT_MASK; // 0~7.5pF - priv->XtalCal_Xin = (tmpu16 & EEPROM_XTAL_CAL_XIN_MASK)>>4; // 0~7.5pF - if((tmpu16 & EEPROM_XTAL_CAL_ENABLE)>>12) - priv->bXtalCalibration = true; + /* Thermal meter reference indication. */ + priv->ThermalMeter = (u8)((tmpu16 & EEPROM_THERMAL_METER_MASK) >> 8); + if ((tmpu16 & EEPROM_THERMAL_METER_ENABLE) >> 13) + priv->bTxPowerTrack = true; - // Thermal meter reference indication. - priv->ThermalMeter = (u8)((tmpu16 & EEPROM_THERMAL_METER_MASK)>>8); - if((tmpu16 & EEPROM_THERMAL_METER_ENABLE)>>13) - priv->bTxPowerTrack = true; - - word = eprom_read(dev,EPROM_TXPW_BASE); + eeprom_93cx6_read(&eeprom, EPROM_TXPW_BASE, &word); priv->cck_txpwr_base = word & 0xf; priv->ofdm_txpwr_base = (word>>4) & 0xf; - version = eprom_read(dev,EPROM_VERSION); + eeprom_93cx6_read(&eeprom, EPROM_VERSION, &version); DMESG("EEPROM version %x",version); priv->rcr_csense = 3; - priv->cs_treshold = (eprom_read(dev, ENERGY_TRESHOLD) & 0xff00) >> 8; - - priv->rf_chip = 0xff & eprom_read(dev, RFCHIPID); + eeprom_93cx6_read(&eeprom, ENERGY_TRESHOLD, &eeprom_val); + priv->cs_treshold = (eeprom_val & 0xff00) >> 8; - priv->rf_chip = RF_ZEBRA4; + eeprom_93cx6_read(&eeprom, RFCHIPID, &eeprom_val); priv->rf_sleep = rtl8225z4_rf_sleep; priv->rf_wakeup = rtl8225z4_rf_wakeup; DMESGW("**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!"); @@ -3010,7 +2921,6 @@ short rtl8180_init(struct net_device *dev) priv->rf_set_chan = rtl8225z2_rf_set_chan; priv->rf_set_sens = NULL; - if (0!=alloc_rx_desc_ring(dev, priv->rxbuffersize, priv->rxringcount)) return -ENOMEM; @@ -3042,11 +2952,7 @@ short rtl8180_init(struct net_device *dev) TX_BEACON_RING_ADDR)) return -ENOMEM; -#if !defined(SA_SHIRQ) if(request_irq(dev->irq, (void *)rtl8180_interrupt, IRQF_SHARED, dev->name, dev)){ -#else - if(request_irq(dev->irq, (void *)rtl8180_interrupt, SA_SHIRQ, dev->name, dev)){ -#endif DMESGE("Error allocating IRQ %d",dev->irq); return -1; }else{ @@ -3169,43 +3075,6 @@ void write_phy_cck (struct net_device *dev, u8 adr, u32 data) rtl8185_write_phy(dev, adr, data | 0x10000); } -/* 70*3 = 210 ms - * I hope this is enougth - */ -#define MAX_PHY 70 -void write_phy(struct net_device *dev, u8 adr, u8 data) -{ - u32 phy; - int i; - - phy = 0xff0000; - phy |= adr; - phy |= 0x80; /* this should enable writing */ - phy |= (data<<8); - - //PHY_ADR, PHY_R and PHY_W are contig and treated as one dword - write_nic_dword(dev,PHY_ADR, phy); - - phy= 0xffff00; - phy |= adr; - - write_nic_dword(dev,PHY_ADR, phy); - for(i=0;i<MAX_PHY;i++){ - phy=read_nic_dword(dev,PHY_ADR); - phy= phy & 0xff0000; - phy= phy >> 16; - if(phy == data){ //SUCCESS! - force_pci_posting(dev); - mdelay(3); //random value - return; - }else{ - force_pci_posting(dev); - mdelay(3); //random value - } - } - DMESGW ("Phy writing %x %x failed!", adr,data); -} - void rtl8185_set_rate(struct net_device *dev) { int i; @@ -3335,7 +3204,6 @@ static struct net_device_stats *rtl8180_stats(struct net_device *dev) } // // Change current and default preamble mode. -// 2005.01.06, by rcnjko. // bool MgntActSet_802_11_PowerSaveMode( @@ -3454,7 +3322,6 @@ void rtl8180_watch_dog(struct net_device *dev) MgntLinkKeepAlive(priv); //YJ,add,080828,for LPS -#ifdef ENABLE_LPS if (priv->PowerProfile == POWER_PROFILE_BATTERY) priv->bLeisurePs = true; else if (priv->PowerProfile == POWER_PROFILE_AC) { @@ -3464,7 +3331,6 @@ void rtl8180_watch_dog(struct net_device *dev) if(priv->ieee80211->state == IEEE80211_LINKED){ priv->link_detect.NumRxOkInPeriod = priv->ieee80211->NumRxDataInPeriod; - //printk("TxOk=%d RxOk=%d\n", priv->link_detect.NumTxOkInPeriod, priv->link_detect.NumRxOkInPeriod); if( priv->link_detect.NumRxOkInPeriod> 666 || priv->link_detect.NumTxOkInPeriod> 666 ) { bBusyTraffic = true; @@ -3481,7 +3347,6 @@ void rtl8180_watch_dog(struct net_device *dev) LeisurePSLeave(priv); } else LeisurePSLeave(priv); -#endif priv->link_detect.bBusyTraffic = bBusyTraffic; priv->link_detect.NumRxOkInPeriod = 0; priv->link_detect.NumTxOkInPeriod = 0; @@ -3503,16 +3368,11 @@ int _rtl8180_up(struct net_device *dev) if(priv->ieee80211->iw_mode == IW_MODE_ADHOC) IPSLeave(dev); } -#ifdef RATE_ADAPT timer_rate_adaptive((unsigned long)dev); -#endif watch_dog_adaptive((unsigned long)dev); -#ifdef SW_ANTE if(priv->bSwAntennaDiverity) SwAntennaDiversityTimerCallback(dev); -#endif ieee80211_softmac_start_protocol(priv->ieee80211); - return 0; } @@ -3748,7 +3608,7 @@ static int __devinit rtl8180_pci_probe(struct pci_dev *pdev, dev->wireless_handlers = &r8180_wx_handlers_def; dev->type=ARPHRD_ETHER; - dev->watchdog_timeo = HZ*3; //added by david woo, 2007.12.13 + dev->watchdog_timeo = HZ*3; if (dev_alloc_name(dev, ifname) < 0){ DMESG("Oops: devname already taken! Trying wlan%%d...\n"); @@ -3864,8 +3724,7 @@ static int __init rtl8180_pci_module_init(void) return ret; } - printk(KERN_INFO "\nLinux kernel driver for RTL8180 \ -/ RTL8185 based WLAN cards\n"); + printk(KERN_INFO "\nLinux kernel driver for RTL8180 / RTL8185 based WLAN cards\n"); printk(KERN_INFO "Copyright (c) 2004-2005, Andrea Merello\n"); DMESG("Initializing module"); DMESG("Wireless extensions version %d", WIRELESS_EXT); @@ -4236,60 +4095,51 @@ void GPIOChangeRFWorkItemCallBack(struct work_struct *work) static char *envp[] = {"HOME=/", "TERM=linux", "PATH=/usr/bin:/bin", NULL}; static int readf_count = 0; -#ifdef ENABLE_LPS if(readf_count % 10 == 0) priv->PowerProfile = read_acadapter_file("/proc/acpi/ac_adapter/AC0/state"); readf_count = (readf_count+1)%0xffff; -#endif - { - // We should turn off LED before polling FF51[4]. + /* We should turn off LED before polling FF51[4]. */ - //Turn off LED. - btPSR = read_nic_byte(dev, PSR); - write_nic_byte(dev, PSR, (btPSR & ~BIT3)); + /* Turn off LED. */ + btPSR = read_nic_byte(dev, PSR); + write_nic_byte(dev, PSR, (btPSR & ~BIT3)); - //It need to delay 4us suggested by Jong, 2008-01-16 - udelay(4); + /* It need to delay 4us suggested by Jong, 2008-01-16 */ + udelay(4); - //HW radio On/Off according to the value of FF51[4](config0) - btConfig0 = btPSR = read_nic_byte(dev, CONFIG0); + /* HW radio On/Off according to the value of FF51[4](config0) */ + btConfig0 = btPSR = read_nic_byte(dev, CONFIG0); - //Turn on LED. - write_nic_byte(dev, PSR, btPSR| BIT3); + eRfPowerStateToSet = (btConfig0 & BIT4) ? eRfOn : eRfOff; - eRfPowerStateToSet = (btConfig0 & BIT4) ? eRfOn : eRfOff; + /* Turn LED back on when radio enabled */ + if (eRfPowerStateToSet == eRfOn) + write_nic_byte(dev, PSR, btPSR | BIT3); - if((priv->ieee80211->bHwRadioOff == true) && (eRfPowerStateToSet == eRfOn)) - { - priv->ieee80211->bHwRadioOff = false; - bActuallySet = true; - } - else if((priv->ieee80211->bHwRadioOff == false) && (eRfPowerStateToSet == eRfOff)) - { - priv->ieee80211->bHwRadioOff = true; - bActuallySet = true; - } + if ((priv->ieee80211->bHwRadioOff == true) && + (eRfPowerStateToSet == eRfOn)) { + priv->ieee80211->bHwRadioOff = false; + bActuallySet = true; + } else if ((priv->ieee80211->bHwRadioOff == false) && + (eRfPowerStateToSet == eRfOff)) { + priv->ieee80211->bHwRadioOff = true; + bActuallySet = true; + } - if(bActuallySet) - { - MgntActSet_RF_State(dev, eRfPowerStateToSet, RF_CHANGE_BY_HW); - - /* To update the UI status for Power status changed */ - if(priv->ieee80211->bHwRadioOff == true) - argv[1] = "RFOFF"; - else{ - //if(!priv->RfOffReason) - argv[1] = "RFON"; - //else - // argv[1] = "RFOFF"; - } - argv[0] = RadioPowerPath; - argv[2] = NULL; - - call_usermodehelper(RadioPowerPath,argv,envp,1); - } - } + if (bActuallySet) { + MgntActSet_RF_State(dev, eRfPowerStateToSet, RF_CHANGE_BY_HW); + + /* To update the UI status for Power status changed */ + if (priv->ieee80211->bHwRadioOff == true) + argv[1] = "RFOFF"; + else + argv[1] = "RFON"; + argv[0] = RadioPowerPath; + argv[2] = NULL; + + call_usermodehelper(RadioPowerPath, argv, envp, 1); + } } static u8 read_acadapter_file(char *filename) |