summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h343
-rw-r--r--arch/mips/pmc-sierra/Kconfig10
-rw-r--r--arch/mips/pmc-sierra/msp71xx/Makefile2
-rw-r--r--arch/mips/pmc-sierra/msp71xx/msp_eth.c187
4 files changed, 541 insertions, 1 deletions
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h
new file mode 100644
index 0000000..156f320
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h
@@ -0,0 +1,343 @@
+/*
+ *
+ * Macros for external SMP-safe access to the PMC MSP71xx reference
+ * board GPIO pins
+ *
+ * Copyright 2010 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MSP_GPIO_MACROS_H__
+#define __MSP_GPIO_MACROS_H__
+
+#include <msp_regops.h>
+#include <msp_regs.h>
+
+#ifdef CONFIG_PMC_MSP7120_GW
+#define MSP_NUM_GPIOS 20
+#else
+#define MSP_NUM_GPIOS 28
+#endif
+
+/* -- GPIO Enumerations -- */
+enum msp_gpio_data {
+ MSP_GPIO_LO = 0,
+ MSP_GPIO_HI = 1,
+ MSP_GPIO_NONE, /* Special - Means pin is out of range */
+ MSP_GPIO_TOGGLE, /* Special - Sets pin to opposite */
+};
+
+enum msp_gpio_mode {
+ MSP_GPIO_INPUT = 0x0,
+ /* MSP_GPIO_ INTERRUPT = 0x1, Not supported yet */
+ MSP_GPIO_UART_INPUT = 0x2, /* Only GPIO 4 or 5 */
+ MSP_GPIO_OUTPUT = 0x8,
+ MSP_GPIO_UART_OUTPUT = 0x9, /* Only GPIO 2 or 3 */
+ MSP_GPIO_PERIF_TIMERA = 0x9, /* Only GPIO 0 or 1 */
+ MSP_GPIO_PERIF_TIMERB = 0xa, /* Only GPIO 0 or 1 */
+ MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */
+};
+
+/* -- Static Tables -- */
+
+/* Maps pins to data register */
+static volatile u32 * const MSP_GPIO_DATA_REGISTER[] = {
+ /* GPIO 0 and 1 on the first register */
+ GPIO_DATA1_REG, GPIO_DATA1_REG,
+ /* GPIO 2, 3, 4, and 5 on the second register */
+ GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG,
+ /* GPIO 6, 7, 8, and 9 on the third register */
+ GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG,
+ /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
+ GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG,
+ GPIO_DATA4_REG, GPIO_DATA4_REG,
+ /* GPIO 16 - 23 on the first strange EXTENDED register */
+ EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
+ EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
+ EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
+ /* GPIO 24 - 27 on the second strange EXTENDED register */
+ EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
+ EXTENDED_GPIO2_REG,
+};
+
+/* Maps pins to mode register */
+static volatile u32 * const MSP_GPIO_MODE_REGISTER[] = {
+ /* GPIO 0 and 1 on the first register */
+ GPIO_CFG1_REG, GPIO_CFG1_REG,
+ /* GPIO 2, 3, 4, and 5 on the second register */
+ GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG,
+ /* GPIO 6, 7, 8, and 9 on the third register */
+ GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG,
+ /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
+ GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG,
+ GPIO_CFG4_REG, GPIO_CFG4_REG,
+ /* GPIO 16 - 23 on the first strange EXTENDED register */
+ EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
+ EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
+ EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
+ /* GPIO 24 - 27 on the second strange EXTENDED register */
+ EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
+ EXTENDED_GPIO2_REG,
+};
+
+/* Maps 'basic' pins to relative offset from 0 per register */
+static int MSP_GPIO_OFFSET[] = {
+ /* GPIO 0 and 1 on the first register */
+ 0, 0,
+ /* GPIO 2, 3, 4, and 5 on the second register */
+ 2, 2, 2, 2,
+ /* GPIO 6, 7, 8, and 9 on the third register */
+ 6, 6, 6, 6,
+ /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
+ 10, 10, 10, 10, 10, 10,
+};
+
+/* Maps MODE to allowed pin mask */
+static unsigned int MSP_GPIO_MODE_ALLOWED[] = {
+ 0xffffffff, /* Mode 0 - INPUT */
+ 0x00000, /* Mode 1 - INTERRUPT */
+ 0x00030, /* Mode 2 - UART_INPUT (GPIO 4, 5)*/
+ 0, 0, 0, 0, 0, /* Modes 3, 4, 5, 6, and 7 are reserved */
+ 0xffffffff, /* Mode 8 - OUTPUT */
+ 0x0000f, /* Mode 9 - UART_OUTPUT/
+ PERF_TIMERA (GPIO 0, 1, 2, 3) */
+ 0x00003, /* Mode a - PERF_TIMERB (GPIO 0, 1) */
+ 0x00000, /* Mode b - Not really a mode! */
+};
+
+/* -- Bit masks -- */
+
+/* This gives you the 'register relative offset gpio' number */
+#define OFFSET_GPIO_NUMBER(gpio) (gpio - MSP_GPIO_OFFSET[gpio])
+
+/* These take the 'register relative offset gpio' number */
+#define BASIC_DATA_REG_MASK(ogpio) (1 << ogpio)
+#define BASIC_MODE_REG_VALUE(mode, ogpio) \
+ (mode << BASIC_MODE_REG_SHIFT(ogpio))
+#define BASIC_MODE_REG_MASK(ogpio) \
+ BASIC_MODE_REG_VALUE(0xf, ogpio)
+#define BASIC_MODE_REG_SHIFT(ogpio) (ogpio * 4)
+#define BASIC_MODE_REG_FROM_REG(data, ogpio) \
+ ((data & BASIC_MODE_REG_MASK(ogpio)) >> BASIC_MODE_REG_SHIFT(ogpio))
+
+/* These take the actual GPIO number (0 through 15) */
+#define BASIC_DATA_MASK(gpio) \
+ BASIC_DATA_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
+#define BASIC_MODE_MASK(gpio) \
+ BASIC_MODE_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
+#define BASIC_MODE(mode, gpio) \
+ BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio))
+#define BASIC_MODE_SHIFT(gpio) \
+ BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio))
+#define BASIC_MODE_FROM_REG(data, gpio) \
+ BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio))
+
+/*
+ * Each extended GPIO register is 32 bits long and is responsible for up to
+ * eight GPIOs. The least significant 16 bits contain the set and clear bit
+ * pair for each of the GPIOs. The most significant 16 bits contain the
+ * disable and enable bit pair for each of the GPIOs. For example, the
+ * extended GPIO reg for GPIOs 16-23 is as follows:
+ *
+ * 31: GPIO23_DISABLE
+ * ...
+ * 19: GPIO17_DISABLE
+ * 18: GPIO17_ENABLE
+ * 17: GPIO16_DISABLE
+ * 16: GPIO16_ENABLE
+ * ...
+ * 3: GPIO17_SET
+ * 2: GPIO17_CLEAR
+ * 1: GPIO16_SET
+ * 0: GPIO16_CLEAR
+ */
+
+/* This gives the 'register relative offset gpio' number */
+#define EXTENDED_OFFSET_GPIO(gpio) (gpio < 24 ? gpio - 16 : gpio - 24)
+
+/* These take the 'register relative offset gpio' number */
+#define EXTENDED_REG_DISABLE(ogpio) (0x2 << ((ogpio * 2) + 16))
+#define EXTENDED_REG_ENABLE(ogpio) (0x1 << ((ogpio * 2) + 16))
+#define EXTENDED_REG_SET(ogpio) (0x2 << (ogpio * 2))
+#define EXTENDED_REG_CLR(ogpio) (0x1 << (ogpio * 2))
+
+/* These take the actual GPIO number (16 through 27) */
+#define EXTENDED_DISABLE(gpio) \
+ EXTENDED_REG_DISABLE(EXTENDED_OFFSET_GPIO(gpio))
+#define EXTENDED_ENABLE(gpio) \
+ EXTENDED_REG_ENABLE(EXTENDED_OFFSET_GPIO(gpio))
+#define EXTENDED_SET(gpio) \
+ EXTENDED_REG_SET(EXTENDED_OFFSET_GPIO(gpio))
+#define EXTENDED_CLR(gpio) \
+ EXTENDED_REG_CLR(EXTENDED_OFFSET_GPIO(gpio))
+
+#define EXTENDED_FULL_MASK (0xffffffff)
+
+/* -- API inline-functions -- */
+
+/*
+ * Gets the current value of the specified pin
+ */
+static inline enum msp_gpio_data msp_gpio_pin_get(unsigned int gpio)
+{
+ u32 pinhi_mask = 0, pinhi_mask2 = 0;
+
+ if (gpio >= MSP_NUM_GPIOS)
+ return MSP_GPIO_NONE;
+
+ if (gpio < 16) {
+ pinhi_mask = BASIC_DATA_MASK(gpio);
+ } else {
+ /*
+ * Two cases are possible with the EXTENDED register:
+ * - In output mode (ENABLED flag set), check the CLR bit
+ * - In input mode (ENABLED flag not set), check the SET bit
+ */
+ pinhi_mask = EXTENDED_ENABLE(gpio) | EXTENDED_CLR(gpio);
+ pinhi_mask2 = EXTENDED_SET(gpio);
+ }
+ if (((*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask) == pinhi_mask) ||
+ (*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask2))
+ return MSP_GPIO_HI;
+ else
+ return MSP_GPIO_LO;
+}
+
+/* Sets the specified pin to the specified value */
+static inline void msp_gpio_pin_set(enum msp_gpio_data data, unsigned int gpio)
+{
+ if (gpio >= MSP_NUM_GPIOS)
+ return;
+
+ if (gpio < 16) {
+ if (data == MSP_GPIO_TOGGLE)
+ toggle_reg32(MSP_GPIO_DATA_REGISTER[gpio],
+ BASIC_DATA_MASK(gpio));
+ else if (data == MSP_GPIO_HI)
+ set_reg32(MSP_GPIO_DATA_REGISTER[gpio],
+ BASIC_DATA_MASK(gpio));
+ else
+ clear_reg32(MSP_GPIO_DATA_REGISTER[gpio],
+ BASIC_DATA_MASK(gpio));
+ } else {
+ if (data == MSP_GPIO_TOGGLE) {
+ /* Special ugly case:
+ * We have to read the CLR bit.
+ * If set, we write the CLR bit.
+ * If not, we write the SET bit.
+ */
+ u32 tmpdata;
+
+ custom_read_reg32(MSP_GPIO_DATA_REGISTER[gpio],
+ tmpdata);
+ if (tmpdata & EXTENDED_CLR(gpio))
+ tmpdata = EXTENDED_CLR(gpio);
+ else
+ tmpdata = EXTENDED_SET(gpio);
+ custom_write_reg32(MSP_GPIO_DATA_REGISTER[gpio],
+ tmpdata);
+ } else {
+ u32 newdata;
+
+ if (data == MSP_GPIO_HI)
+ newdata = EXTENDED_SET(gpio);
+ else
+ newdata = EXTENDED_CLR(gpio);
+ set_value_reg32(MSP_GPIO_DATA_REGISTER[gpio],
+ EXTENDED_FULL_MASK, newdata);
+ }
+ }
+}
+
+/* Sets the specified pin to the specified value */
+static inline void msp_gpio_pin_hi(unsigned int gpio)
+{
+ msp_gpio_pin_set(MSP_GPIO_HI, gpio);
+}
+
+/* Sets the specified pin to the specified value */
+static inline void msp_gpio_pin_lo(unsigned int gpio)
+{
+ msp_gpio_pin_set(MSP_GPIO_LO, gpio);
+}
+
+/* Sets the specified pin to the opposite value */
+static inline void msp_gpio_pin_toggle(unsigned int gpio)
+{
+ msp_gpio_pin_set(MSP_GPIO_TOGGLE, gpio);
+}
+
+/* Gets the mode of the specified pin */
+static inline enum msp_gpio_mode msp_gpio_pin_get_mode(unsigned int gpio)
+{
+ enum msp_gpio_mode retval = MSP_GPIO_UNKNOWN;
+ uint32_t data;
+
+ if (gpio >= MSP_NUM_GPIOS)
+ return retval;
+
+ data = *MSP_GPIO_MODE_REGISTER[gpio];
+
+ if (gpio < 16) {
+ retval = BASIC_MODE_FROM_REG(data, gpio);
+ } else {
+ /* Extended pins can only be either INPUT or OUTPUT */
+ if (data & EXTENDED_ENABLE(gpio))
+ retval = MSP_GPIO_OUTPUT;
+ else
+ retval = MSP_GPIO_INPUT;
+ }
+
+ return retval;
+}
+
+/*
+ * Sets the specified mode on the requested pin
+ * Returns 0 on success, or -1 if that mode is not allowed on this pin
+ */
+static inline int msp_gpio_pin_mode(enum msp_gpio_mode mode, unsigned int gpio)
+{
+ u32 modemask, newmode;
+
+ if ((1 << gpio) & ~MSP_GPIO_MODE_ALLOWED[mode])
+ return -1;
+
+ if (gpio >= MSP_NUM_GPIOS)
+ return -1;
+
+ if (gpio < 16) {
+ modemask = BASIC_MODE_MASK(gpio);
+ newmode = BASIC_MODE(mode, gpio);
+ } else {
+ modemask = EXTENDED_FULL_MASK;
+ if (mode == MSP_GPIO_INPUT)
+ newmode = EXTENDED_DISABLE(gpio);
+ else
+ newmode = EXTENDED_ENABLE(gpio);
+ }
+ /* Do the set atomically */
+ set_value_reg32(MSP_GPIO_MODE_REGISTER[gpio], modemask, newmode);
+
+ return 0;
+}
+
+#endif /* __MSP_GPIO_MACROS_H__ */
diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig
index c437b8a..bbd7608 100644
--- a/arch/mips/pmc-sierra/Kconfig
+++ b/arch/mips/pmc-sierra/Kconfig
@@ -24,6 +24,7 @@ config PMC_MSP7120_GW
select IRQ_MSP_CIC
select HW_HAS_PCI
select MSP_HAS_USB
+ select MSP_ETH
config PMC_MSP7120_FPGA
bool "PMC-Sierra MSP7120 FPGA"
@@ -40,3 +41,12 @@ config HYPERTRANSPORT
config MSP_HAS_USB
boolean
depends on PMC_MSP
+
+config MSP_ETH
+ boolean
+ select MSP_HAS_MAC
+ depends on PMC_MSP
+
+config MSP_HAS_MAC
+ boolean
+ depends on PMC_MSP
diff --git a/arch/mips/pmc-sierra/msp71xx/Makefile b/arch/mips/pmc-sierra/msp71xx/Makefile
index f26cab3..cefba77 100644
--- a/arch/mips/pmc-sierra/msp71xx/Makefile
+++ b/arch/mips/pmc-sierra/msp71xx/Makefile
@@ -8,7 +8,7 @@ obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o
obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o
obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o
obj-$(CONFIG_PCI) += msp_pci.o
-obj-$(CONFIG_MSPETH) += msp_eth.o
+obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o
obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o
obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o
obj-$(CONFIG_MIPS_MT_SMTC) += msp_smtc.o
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_eth.c b/arch/mips/pmc-sierra/msp71xx/msp_eth.c
new file mode 100644
index 0000000..c584df3
--- /dev/null
+++ b/arch/mips/pmc-sierra/msp71xx/msp_eth.c
@@ -0,0 +1,187 @@
+/*
+ * The setup file for ethernet related hardware on PMC-Sierra MSP processors.
+ *
+ * Copyright 2010 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <msp_regs.h>
+#include <msp_int.h>
+#include <msp_gpio_macros.h>
+
+
+#define MSP_ETHERNET_GPIO0 14
+#define MSP_ETHERNET_GPIO1 15
+#define MSP_ETHERNET_GPIO2 16
+
+#ifdef CONFIG_MSP_HAS_TSMAC
+#define MSP_TSMAC_SIZE 0x10020
+#define MSP_TSMAC_ID "pmc_tsmac"
+
+static struct resource msp_tsmac0_resources[] = {
+ [0] = {
+ .start = MSP_MAC0_BASE,
+ .end = MSP_MAC0_BASE + MSP_TSMAC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_MAC0,
+ .end = MSP_INT_MAC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msp_tsmac1_resources[] = {
+ [0] = {
+ .start = MSP_MAC1_BASE,
+ .end = MSP_MAC1_BASE + MSP_TSMAC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_MAC1,
+ .end = MSP_INT_MAC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+static struct resource msp_tsmac2_resources[] = {
+ [0] = {
+ .start = MSP_MAC2_BASE,
+ .end = MSP_MAC2_BASE + MSP_TSMAC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_SAR,
+ .end = MSP_INT_SAR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+static struct platform_device tsmac_device[] = {
+ [0] = {
+ .name = MSP_TSMAC_ID,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(msp_tsmac0_resources),
+ .resource = msp_tsmac0_resources,
+ },
+ [1] = {
+ .name = MSP_TSMAC_ID,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(msp_tsmac1_resources),
+ .resource = msp_tsmac1_resources,
+ },
+ [2] = {
+ .name = MSP_TSMAC_ID,
+ .id = 2,
+ .num_resources = ARRAY_SIZE(msp_tsmac2_resources),
+ .resource = msp_tsmac2_resources,
+ },
+};
+#define msp_eth_devs tsmac_device
+
+#else
+/* If it is not TSMAC assume MSP_ETH (100Mbps) */
+#define MSP_ETH_ID "pmc_mspeth"
+#define MSP_ETH_SIZE 0xE0
+static struct resource msp_eth0_resources[] = {
+ [0] = {
+ .start = MSP_MAC0_BASE,
+ .end = MSP_MAC0_BASE + MSP_ETH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_MAC0,
+ .end = MSP_INT_MAC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msp_eth1_resources[] = {
+ [0] = {
+ .start = MSP_MAC1_BASE,
+ .end = MSP_MAC1_BASE + MSP_ETH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_MAC1,
+ .end = MSP_INT_MAC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+
+static struct platform_device mspeth_device[] = {
+ [0] = {
+ .name = MSP_ETH_ID,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(msp_eth0_resources),
+ .resource = msp_eth0_resources,
+ },
+ [1] = {
+ .name = MSP_ETH_ID,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(msp_eth1_resources),
+ .resource = msp_eth1_resources,
+ },
+
+};
+#define msp_eth_devs mspeth_device
+
+#endif
+int __init msp_eth_setup(void)
+{
+ int i, ret = 0;
+
+ /* Configure the GPIO and take the ethernet PHY out of reset */
+ msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0);
+ msp_gpio_pin_hi(MSP_ETHERNET_GPIO0);
+
+#ifdef CONFIG_MSP_HAS_TSMAC
+ /* 3 phys on boards with TSMAC */
+ msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO1);
+ msp_gpio_pin_hi(MSP_ETHERNET_GPIO1);
+
+ msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO2);
+ msp_gpio_pin_hi(MSP_ETHERNET_GPIO2);
+#endif
+ for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) {
+ ret = platform_device_register(&msp_eth_devs[i]);
+ printk(KERN_INFO "device: %d, return value = %d\n", i, ret);
+ if (ret) {
+ platform_device_unregister(&msp_eth_devs[i]);
+ break;
+ }
+ }
+
+ if (ret)
+ printk(KERN_WARNING "Could not initialize "
+ "MSPETH device structures.\n");
+
+ return ret;
+}
+subsys_initcall(msp_eth_setup);