summaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/imote2.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/imote2.c')
-rw-r--r--arch/arm/mach-pxa/imote2.c54
1 files changed, 35 insertions, 19 deletions
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2121309..961807d 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -22,6 +22,7 @@
#include <linux/spi/spi.h>
#include <linux/i2c.h>
#include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -29,7 +30,7 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/udc.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
@@ -102,6 +103,10 @@ static unsigned long imote2_pin_config[] __initdata = {
GPIO96_GPIO, /* accelerometer interrupt */
GPIO99_GPIO, /* ADC interrupt */
+ /* SHT15 */
+ GPIO100_GPIO,
+ GPIO98_GPIO,
+
/* Connector pins specified as gpios */
GPIO94_GPIO, /* large basic connector pin 14 */
GPIO10_GPIO, /* large basic connector pin 23 */
@@ -112,6 +117,26 @@ static unsigned long imote2_pin_config[] __initdata = {
GPIO105_GPIO, /* blue led */
};
+static struct sht15_platform_data platform_data_sht15 = {
+ .gpio_data = 100,
+ .gpio_sck = 98,
+};
+
+static struct platform_device sht15 = {
+ .name = "sht15",
+ .id = -1,
+ .dev = {
+ .platform_data = &platform_data_sht15,
+ },
+};
+
+static struct regulator_consumer_supply imote2_sensor_3_con[] = {
+ {
+ .dev = &sht15.dev,
+ .supply = "vcc",
+ },
+};
+
static struct gpio_led imote2_led_pins[] = {
{
.name = "imote2:red",
@@ -257,6 +282,8 @@ static struct regulator_init_data imote2_ldo_init_data[] = {
.min_uV = 2800000,
.max_uV = 3000000,
},
+ .num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con),
+ .consumer_supplies = imote2_sensor_3_con,
},
[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
.constraints = {
@@ -412,7 +439,7 @@ static struct platform_device imote2_flash_device = {
*/
static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
{ /* UCAM sensor board */
- .type = "max1238",
+ .type = "max1239",
.addr = 0x35,
}, { /* ITS400 Sensor board only */
.type = "max1363",
@@ -432,6 +459,9 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
.type = "tmp175",
.addr = 0x4A,
.irq = IRQ_GPIO(96),
+ }, { /* IMB400 Multimedia board */
+ .type = "wm8940",
+ .addr = 0x1A,
},
};
@@ -456,25 +486,12 @@ static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
.num_chipselect = 1,
};
-/* Patch posted by Eric Miao <eric.miao@marvell.com> will remove
- * the need for these functions.
- */
-static void spi1control(u32 command)
-{
- gpio_set_value(24, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
-static void spi3control(u32 command)
-{
- gpio_set_value(39, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
static struct pxa2xx_spi_chip staccel_chip_info = {
.tx_threshold = 8,
.rx_threshold = 8,
.dma_burst_size = 8,
.timeout = 235,
- .cs_control = spi1control,
+ .gpio_cs = 24,
};
static struct pxa2xx_spi_chip cc2420_info = {
@@ -482,7 +499,7 @@ static struct pxa2xx_spi_chip cc2420_info = {
.rx_threshold = 8,
.dma_burst_size = 8,
.timeout = 235,
- .cs_control = spi3control,
+ .gpio_cs = 39,
};
static struct spi_board_info spi_board_info[] __initdata = {
@@ -521,6 +538,7 @@ static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
static struct platform_device *imote2_devices[] = {
&imote2_flash_device,
&imote2_leds,
+ &sht15,
};
static struct i2c_pxa_platform_data i2c_pwr_pdata = {
@@ -538,8 +556,6 @@ static void __init imote2_init(void)
/* SPI chip select directions - all other directions should
* be handled by drivers.*/
gpio_direction_output(37, 0);
- gpio_direction_output(24, 0);
- gpio_direction_output(39, 0);
platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));