diff options
Diffstat (limited to 'arch/arm/plat-s3c64xx/include/plat')
-rw-r--r-- | arch/arm/plat-s3c64xx/include/plat/dma-plat.h | 70 | ||||
-rw-r--r-- | arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h | 20 | ||||
-rw-r--r-- | arch/arm/plat-s3c64xx/include/plat/irqs.h | 1 | ||||
-rw-r--r-- | arch/arm/plat-s3c64xx/include/plat/pm-core.h | 98 | ||||
-rw-r--r-- | arch/arm/plat-s3c64xx/include/plat/regs-clock.h | 1 | ||||
-rw-r--r-- | arch/arm/plat-s3c64xx/include/plat/s3c6400.h | 3 |
6 files changed, 182 insertions, 11 deletions
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h new file mode 100644 index 0000000..0c30dd9 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h @@ -0,0 +1,70 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h + * + * Copyright 2009 Openmoko, Inc. + * Copyright 2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX DMA core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ + +struct s3c64xx_dma_buff; + +/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor + * @next: Pointer to next buffer in queue or ring. + * @pw: Client provided identifier + * @lli: Pointer to hardware descriptor this buffer is associated with. + * @lli_dma: Hardare address of the descriptor. + */ +struct s3c64xx_dma_buff { + struct s3c64xx_dma_buff *next; + + void *pw; + struct pl080_lli *lli; + dma_addr_t lli_dma; +}; + +struct s3c64xx_dmac; + +struct s3c2410_dma_chan { + unsigned char number; /* number of this dma channel */ + unsigned char in_use; /* channel allocated */ + unsigned char bit; /* bit for enable/disable/etc */ + unsigned char hw_width; + unsigned char peripheral; + + unsigned int flags; + enum s3c2410_dmasrc source; + + + dma_addr_t dev_addr; + + struct s3c2410_dma_client *client; + struct s3c64xx_dmac *dmac; /* pointer to controller */ + + void __iomem *regs; + + /* cdriver callbacks */ + s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ + s3c2410_dma_opfn_t op_fn; /* channel op callback */ + + /* buffer list and information */ + struct s3c64xx_dma_buff *curr; /* current dma buffer */ + struct s3c64xx_dma_buff *next; /* next buffer to load */ + struct s3c64xx_dma_buff *end; /* end of queue */ + + /* note, when channel is running in circular mode, curr is the + * first buffer enqueued, end is the last and curr is where the + * last buffer-done event is set-at. The buffers are not freed + * and the last buffer hardware descriptor points back to the + * first. + */ +}; + +#include <plat/dma-core.h> diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h index 8154951..2ba1767 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h @@ -61,14 +61,14 @@ #define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) #define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) -#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 32) -#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 32) -#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 32) -#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 32) -#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 32) - -#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 36) -#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 36) -#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 36) -#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 36) +#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0) +#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0) +#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0) +#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0) +#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0) +#define S3C64XX_GPH9_OUTPUT (0x01 << 4) +#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4) +#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4) +#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4) +#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4) diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h index f865bf4..743a700 100644 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h @@ -157,6 +157,7 @@ #define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE) #define IRQ_EINT(x) S3C_EINT(x) +#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0)) /* Next the external interrupt groups. These are similar to the IRQ_EINT(x) * that they are sourced from the GPIO pins but with a different scheme for diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/plat-s3c64xx/include/plat/pm-core.h new file mode 100644 index 0000000..d347de3 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/pm-core.h @@ -0,0 +1,98 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <plat/regs-gpio.h> + +static inline void s3c_pm_debug_init_uart(void) +{ + u32 tmp = __raw_readl(S3C_PCLK_GATE); + + /* As a note, since the S3C64XX UARTs generally have multiple + * clock sources, we simply enable PCLK at the moment and hope + * that the resume settings for the UART are suitable for the + * use with PCLK. + */ + + tmp |= S3C_CLKCON_PCLK_UART0; + tmp |= S3C_CLKCON_PCLK_UART1; + tmp |= S3C_CLKCON_PCLK_UART2; + tmp |= S3C_CLKCON_PCLK_UART3; + + __raw_writel(tmp, S3C_PCLK_GATE); + udelay(10); +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + /* VIC should have already been taken care of */ + + /* clear any pending EINT0 interrupts */ + __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND); +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ +} + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ +} + +/* make these defines, we currently do not have any need to change + * the IRQ wake controls depending on the CPU we are running on */ + +#define s3c_irqwake_eintallow ((1 << 28) - 1) +#define s3c_irqwake_intallow (0) + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ + u32 ucon = __raw_readl(regs + S3C2410_UCON); + u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK; + u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK; + u32 new_ucon; + u32 delta; + + /* S3C64XX UART blocks only support level interrupts, so ensure that + * when we restore unused UART blocks we force the level interrupt + * settigs. */ + save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL; + + /* We have a constraint on changing the clock type of the UART + * between UCLKx and PCLK, so ensure that when we restore UCON + * that the CLK field is correctly modified if the bootloader + * has changed anything. + */ + if (ucon_clk != save_clk) { + new_ucon = save->ucon; + delta = ucon_clk ^ save_clk; + + /* change from UCLKx => wrong PCLK, + * either UCLK can be tested for by a bit-test + * with UCLK0 */ + if (ucon_clk & S3C6400_UCON_UCLK0 && + !(save_clk & S3C6400_UCON_UCLK0) && + delta & S3C6400_UCON_PCLK2) { + new_ucon &= ~S3C6400_UCON_UCLK0; + } else if (delta == S3C6400_UCON_PCLK2) { + /* as an precaution, don't change from + * PCLK2 => PCLK or vice-versa */ + new_ucon ^= S3C6400_UCON_PCLK2; + } + + S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n", + ucon, new_ucon, save->ucon); + save->ucon = new_ucon; + } +} diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h index b1082c1..52836d4 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h +++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h @@ -32,6 +32,7 @@ #define S3C_HCLK_GATE S3C_CLKREG(0x30) #define S3C_PCLK_GATE S3C_CLKREG(0x34) #define S3C_SCLK_GATE S3C_CLKREG(0x38) +#define S3C_MEM0_GATE S3C_CLKREG(0x3C) /* CLKDIV0 */ #define S3C6400_CLKDIV0_MFC_MASK (0xf << 28) diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h index 571eaa2..11f2e1e 100644 --- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h +++ b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h @@ -15,12 +15,13 @@ /* Common init code for S3C6400 related SoCs */ extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c6400_register_clocks(void); +extern void s3c6400_register_clocks(unsigned armclk_divlimit); extern void s3c6400_setup_clocks(void); #ifdef CONFIG_CPU_S3C6400 extern int s3c6400_init(void); +extern void s3c6400_init_irq(void); extern void s3c6400_map_io(void); extern void s3c6400_init_clocks(int xtal); |