diff options
Diffstat (limited to 'arch/blackfin/mach-common')
-rw-r--r-- | arch/blackfin/mach-common/arch_checks.c | 7 | ||||
-rw-r--r-- | arch/blackfin/mach-common/cache-c.c | 14 | ||||
-rw-r--r-- | arch/blackfin/mach-common/cache.S | 46 | ||||
-rw-r--r-- | arch/blackfin/mach-common/clocks-init.c | 1 | ||||
-rw-r--r-- | arch/blackfin/mach-common/cpufreq.c | 3 | ||||
-rw-r--r-- | arch/blackfin/mach-common/entry.S | 90 | ||||
-rw-r--r-- | arch/blackfin/mach-common/head.S | 34 | ||||
-rw-r--r-- | arch/blackfin/mach-common/interrupt.S | 27 | ||||
-rw-r--r-- | arch/blackfin/mach-common/ints-priority.c | 50 | ||||
-rw-r--r-- | arch/blackfin/mach-common/smp.c | 36 |
10 files changed, 177 insertions, 131 deletions
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index 80d39b2..da93d92 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -71,3 +71,10 @@ #if ANOMALY_05000448 # error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes. #endif + +/* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */ +#if ANOMALY_05000220 && \ + ((defined(CONFIG_BFIN_WB) && defined(CONFIG_BFIN_L2_NOT_CACHED)) || \ + (!defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_L2_WB))) +# error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB. +#endif diff --git a/arch/blackfin/mach-common/cache-c.c b/arch/blackfin/mach-common/cache-c.c index e6ab1f8..b59ce3c 100644 --- a/arch/blackfin/mach-common/cache-c.c +++ b/arch/blackfin/mach-common/cache-c.c @@ -16,9 +16,21 @@ void blackfin_invalidate_entire_dcache(void) { u32 dmem = bfin_read_DMEM_CONTROL(); - SSYNC(); bfin_write_DMEM_CONTROL(dmem & ~0xc); SSYNC(); bfin_write_DMEM_CONTROL(dmem); SSYNC(); } + +/* Invalidate the Entire Instruction cache by + * clearing IMC bit + */ +void blackfin_invalidate_entire_icache(void) +{ + u32 imem = bfin_read_IMEM_CONTROL(); + bfin_write_IMEM_CONTROL(imem & ~0x4); + SSYNC(); + bfin_write_IMEM_CONTROL(imem); + SSYNC(); +} + diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index aa0648c..d9666fe 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -15,6 +15,13 @@ .text +/* 05000443 - IFLUSH cannot be last instruction in hardware loop */ +#if ANOMALY_05000443 +# define BROK_FLUSH_INST "IFLUSH" +#else +# define BROK_FLUSH_INST "no anomaly! yeah!" +#endif + /* Since all L1 caches work the same way, we use the same method for flushing * them. Only the actual flush instruction differs. We write this in asm as * GCC can be hard to coax into writing nice hardware loops. @@ -23,7 +30,7 @@ * R0 = start address * R1 = end address */ -.macro do_flush flushins:req optflushins optnopins label +.macro do_flush flushins:req label R2 = -L1_CACHE_BYTES; @@ -44,22 +51,15 @@ \label : .endif P0 = R0; + LSETUP (1f, 2f) LC1 = P1; 1: -.ifnb \optflushins - \optflushins [P0]; -.endif -#if ANOMALY_05000443 -.ifb \optnopins -2: -.endif +.ifeqs "\flushins", BROK_FLUSH_INST \flushins [P0++]; -.ifnb \optnopins -2: \optnopins; -.endif -#else +2: nop; +.else 2: \flushins [P0++]; -#endif +.endif RTS; .endm @@ -77,25 +77,9 @@ ENTRY(_blackfin_icache_flush_range) */ P0 = R0; IFLUSH[P0]; - do_flush IFLUSH, , nop + do_flush IFLUSH ENDPROC(_blackfin_icache_flush_range) -/* Flush all cache lines assocoiated with this area of memory. */ -ENTRY(_blackfin_icache_dcache_flush_range) -/* - * Walkaround to avoid loading wrong instruction after invalidating icache - * and following sequence is met. - * - * 1) One instruction address is cached in the instruction cache. - * 2) This instruction in SDRAM is changed. - * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range(). - * 4) This instruction is executed again, but the old one is loaded. - */ - P0 = R0; - IFLUSH[P0]; - do_flush FLUSH, IFLUSH -ENDPROC(_blackfin_icache_dcache_flush_range) - /* Throw away all D-cached data in specified region without any obligation to * write them back. Since the Blackfin ISA does not have an "invalidate" * instruction, we use flush/invalidate. Perhaps as a speed optimization we @@ -107,7 +91,7 @@ ENDPROC(_blackfin_dcache_invalidate_range) /* Flush all data cache lines assocoiated with this memory area */ ENTRY(_blackfin_dcache_flush_range) - do_flush FLUSH, , , .Ldfr + do_flush FLUSH, .Ldfr ENDPROC(_blackfin_dcache_flush_range) /* Our headers convert the page structure to an address, so just need to flush diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c index 3539365..ef6870e 100644 --- a/arch/blackfin/mach-common/clocks-init.c +++ b/arch/blackfin/mach-common/clocks-init.c @@ -72,6 +72,7 @@ void init_clocks(void) #endif bfin_write_PLL_LOCKCNT(0x300); do_sync(); + /* We always write PLL_CTL thus avoiding Anomaly 05000242 */ bfin_write16(PLL_CTL, PLL_CTL_VAL); __asm__ __volatile__("IDLE;"); bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c index 72e1660..70e3411 100644 --- a/arch/blackfin/mach-common/cpufreq.c +++ b/arch/blackfin/mach-common/cpufreq.c @@ -140,7 +140,8 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy) cclk = get_cclk() / 1000; sclk = get_sclk() / 1000; -#if ANOMALY_05000273 || (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE)) +#if ANOMALY_05000273 || ANOMALY_05000274 || \ + (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE)) min_cclk = sclk * 2; #else min_cclk = sclk; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 21e65a3..31fa313 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -36,13 +36,13 @@ #include <linux/init.h> #include <linux/linkage.h> #include <linux/unistd.h> -#include <linux/threads.h> #include <asm/blackfin.h> #include <asm/errno.h> #include <asm/fixed_code.h> #include <asm/thread_info.h> /* TIF_NEED_RESCHED */ #include <asm/asm-offsets.h> #include <asm/trace.h> +#include <asm/traps.h> #include <asm/context.S> @@ -85,13 +85,15 @@ ENTRY(_ex_workaround_261) if !cc jump _bfin_return_from_exception; /* fall through */ R7 = P4; - R6 = 0x26; /* Data CPLB Miss */ + R6 = VEC_CPLB_M; /* Data CPLB Miss */ cc = R6 == R7; if cc jump _ex_dcplb_miss (BP); - R6 = 0x23; /* Data CPLB Miss */ +#ifdef CONFIG_MPU + R6 = VEC_CPLB_VL; /* Data CPLB Violation */ cc = R6 == R7; if cc jump _ex_dcplb_viol (BP); - /* Handle 0x23 Data CPLB Protection Violation +#endif + /* Handle Data CPLB Protection Violation * and Data CPLB Multiple Hits - Linux Trap Zero */ jump _ex_trap_c; @@ -201,7 +203,18 @@ ENTRY(_ex_single_step) cc = r7 == 0; if !cc jump 1f; #endif - +#ifdef CONFIG_EXACT_HWERR + /* Read the ILAT, and to check to see if the process we are + * single stepping caused a previous hardware error + * If so, do not single step, (which lowers to IRQ5, and makes + * us miss the error). + */ + p5.l = lo(ILAT); + p5.h = hi(ILAT); + r7 = [p5]; + cc = bittst(r7, EVT_IVHW_P); + if cc jump 1f; +#endif /* Single stepping only a single instruction, so clear the trace * bit here. */ r7 = syscfg; @@ -260,16 +273,7 @@ ENTRY(_bfin_return_from_exception) r6.l = lo(SEQSTAT_EXCAUSE); r6.h = hi(SEQSTAT_EXCAUSE); r7 = r7 & r6; - r6 = 0x25; - CC = R7 == R6; - if CC JUMP _double_fault; - - /* Did we cause a HW error? */ - p5.l = lo(ILAT); - p5.h = hi(ILAT); - r6 = [p5]; - r7 = 0x20; /* Did I just cause anther HW error? */ - r6 = r7 & r6; + r6 = VEC_UNCOV; CC = R7 == R6; if CC JUMP _double_fault; #endif @@ -473,6 +477,16 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ [--sp] = ASTAT; [--sp] = (R7:6,P5:4); +#ifdef CONFIG_EXACT_HWERR + /* Make sure all pending read/writes complete. This will ensure any + * accesses which could cause hardware errors completes, and signal + * the the hardware before we do something silly, like crash the + * kernel. We don't need to work around anomaly 05000312, since + * we are already atomic + */ + ssync; +#endif + #if ANOMALY_05000283 || ANOMALY_05000315 cc = r7 == r7; p5.h = HI(CHIPID); @@ -855,7 +869,7 @@ ENTRY(_ret_from_exception) p1.h = _schedule_and_signal; [p0] = p1; csync; - raise 15; /* raise evt14 to do signal or reschedule */ + raise 15; /* raise evt15 to do signal or reschedule */ 4: r0 = syscfg; bitclr(r0, 0); @@ -916,7 +930,7 @@ ENTRY(_return_from_int) p1.h = _schedule_and_signal_from_int; [p0] = p1; csync; -#if ANOMALY_05000281 +#if ANOMALY_05000281 || ANOMALY_05000461 r0.l = lo(SAFE_USER_INSTRUCTION); r0.h = hi(SAFE_USER_INSTRUCTION); reti = r0; @@ -930,18 +944,27 @@ ENTRY(_return_from_int) ENDPROC(_return_from_int) ENTRY(_lower_to_irq14) -#if ANOMALY_05000281 +#if ANOMALY_05000281 || ANOMALY_05000461 r0.l = lo(SAFE_USER_INSTRUCTION); r0.h = hi(SAFE_USER_INSTRUCTION); reti = r0; #endif - r0 = 0x401f; + +#ifdef CONFIG_DEBUG_HWERR + /* enable irq14 & hwerr interrupt, until we transition to _evt14_softirq */ + r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); +#else + /* Only enable irq14 interrupt, until we transition to _evt14_softirq */ + r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); +#endif sti r0; raise 14; rti; +ENDPROC(_lower_to_irq14) + ENTRY(_evt14_softirq) #ifdef CONFIG_DEBUG_HWERR - r0 = 0x3f; + r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); sti r0; #else cli r0; @@ -949,8 +972,9 @@ ENTRY(_evt14_softirq) [--sp] = RETI; SP += 4; rts; +ENDPROC(_evt14_softirq) -_schedule_and_signal_from_int: +ENTRY(_schedule_and_signal_from_int) /* To end up here, vector 15 was changed - so we have to change it * back. */ @@ -983,8 +1007,9 @@ _schedule_and_signal_from_int: call _finish_atomic_sections; sp += 12; jump.s .Lresume_userspace; +ENDPROC(_schedule_and_signal_from_int) -_schedule_and_signal: +ENTRY(_schedule_and_signal) SAVE_CONTEXT_SYSCALL /* To end up here, vector 15 was changed - so we have to change it * back. @@ -1002,7 +1027,7 @@ _schedule_and_signal: 1: RESTORE_CONTEXT rti; -ENDPROC(_lower_to_irq14) +ENDPROC(_schedule_and_signal) /* We handle this 100% in exception space - to reduce overhead * Only potiential problem is if the software buffer gets swapped out of the @@ -1581,24 +1606,11 @@ ENTRY(_sys_call_table) .long _sys_dup3 .long _sys_pipe2 .long _sys_inotify_init1 /* 365 */ + .long _sys_preadv + .long _sys_pwritev + .long _sys_rt_tgsigqueueinfo .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall .endr END(_sys_call_table) - -#ifdef CONFIG_EXCEPTION_L1_SCRATCH -/* .section .l1.bss.scratch */ -.set _exception_stack_top, L1_SCRATCH_START + L1_SCRATCH_LENGTH -#else -#ifdef CONFIG_SYSCALL_TAB_L1 -.section .l1.bss -#else -.bss -#endif -ENTRY(_exception_stack) - .rept 1024 * NR_CPUS - .long 0 - .endr -_exception_stack_top: -#endif diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index 698d4c0..f826f6b 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -30,8 +30,6 @@ ENTRY(__init_clear_bss) rts; ENDPROC(__init_clear_bss) -#define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) - ENTRY(__start) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; @@ -126,30 +124,30 @@ ENTRY(__start) * below */ GET_PDA(p0, r0); - r7 = [p0 + PDA_RETX]; + r6 = [p0 + PDA_RETX]; p1.l = _init_saved_retx; p1.h = _init_saved_retx; - [p1] = r7; + [p1] = r6; - r7 = [p0 + PDA_DCPLB]; + r6 = [p0 + PDA_DCPLB]; p1.l = _init_saved_dcplb_fault_addr; p1.h = _init_saved_dcplb_fault_addr; - [p1] = r7; + [p1] = r6; - r7 = [p0 + PDA_ICPLB]; + r6 = [p0 + PDA_ICPLB]; p1.l = _init_saved_icplb_fault_addr; p1.h = _init_saved_icplb_fault_addr; - [p1] = r7; + [p1] = r6; - r7 = [p0 + PDA_SEQSTAT]; + r6 = [p0 + PDA_SEQSTAT]; p1.l = _init_saved_seqstat; p1.h = _init_saved_seqstat; - [p1] = r7; + [p1] = r6; #endif /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); + sp.l = _init_thread_union; + sp.h = _init_thread_union; fp = sp; usp = sp; @@ -189,7 +187,15 @@ ENTRY(__start) /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bfin_relocate_l1_mem; #ifdef CONFIG_BFIN_KERNEL_CLOCK + /* Only use on-chip scratch space for stack when absolutely required + * to avoid Anomaly 05000227 ... we know the init_clocks() func only + * uses L1 text and stack space and no other memory region. + */ +# define KERNEL_CLOCK_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) + sp.l = lo(KERNEL_CLOCK_STACK); + sp.h = hi(KERNEL_CLOCK_STACK); call _init_clocks; + sp = usp; /* usp hasnt been touched, so restore from there */ #endif /* This section keeps the processor in supervisor mode @@ -243,9 +249,7 @@ ENTRY(_real_start) call _cmdline_init; /* Load the current thread pointer and stack */ - sp.l = _init_thread_union; - sp.h = _init_thread_union; - p1 = THREAD_SIZE (z); + p1 = THREAD_SIZE + 4 (z); /* +4 is for reti loading */ sp = sp + p1; usp = sp; fp = sp; diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 0069c2d..9c46680 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -145,6 +145,14 @@ __common_int_entry: /* interrupt routine for ivhw - 5 */ ENTRY(_evt_ivhw) + /* In case a single action kicks off multiple memory transactions, (like + * a cache line fetch, - this can cause multiple hardware errors, let's + * catch them all. First - make sure all the actions are complete, and + * the core sees the hardware errors. + */ + SSYNC; + SSYNC; + SAVE_ALL_SYS #ifdef CONFIG_FRAME_POINTER fp = 0; @@ -159,6 +167,25 @@ ENTRY(_evt_ivhw) 1: #endif + /* Handle all stacked hardware errors + * To make sure we don't hang forever, only do it 10 times + */ + R0 = 0; + R2 = 10; +1: + P0.L = LO(ILAT); + P0.H = HI(ILAT); + R1 = [P0]; + CC = BITTST(R1, EVT_IVHW_P); + IF ! CC JUMP 2f; + /* OK a hardware error is pending - clear it */ + R1 = EVT_IVHW_P; + [P0] = R1; + R0 += 1; + CC = R1 == R2; + if CC JUMP 2f; + JUMP 1b; +2: # We are going to dump something out, so make sure we print IPEND properly p2.l = lo(IPEND); p2.h = hi(IPEND); diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index a7d7b2d..351afd0 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -1052,7 +1052,7 @@ int __init init_arch_irq(void) set_irq_chained_handler(irq, bfin_demux_error_irq); break; #endif -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_TICKSOURCE_GPTMR0) case IRQ_TIMER0: set_irq_handler(irq, handle_percpu_irq); break; @@ -1116,6 +1116,9 @@ int __init init_arch_irq(void) IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; + /* This implicitly covers ANOMALY_05000171 + * Boot-ROM code modifies SICA_IWRx wakeup registers + */ #ifdef SIC_IWR0 bfin_write_SIC_IWR0(IWR_DISABLE_ALL); # ifdef SIC_IWR1 @@ -1136,13 +1139,6 @@ int __init init_arch_irq(void) bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif -#ifdef CONFIG_IPIPE - for (irq = 0; irq < NR_IRQS; irq++) { - struct irq_desc *desc = irq_to_desc(irq); - desc->ic_prio = __ipipe_get_irq_priority(irq); - } -#endif /* CONFIG_IPIPE */ - return 0; } @@ -1156,23 +1152,22 @@ void do_irq(int vec, struct pt_regs *fp) } else { struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst; struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop; -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \ - || defined(BF538_FAMILY) || defined(CONFIG_BF51x) +#if defined(SIC_ISR0) || defined(SICA_ISR0) unsigned long sic_status[3]; if (smp_processor_id()) { -#ifdef CONFIG_SMP +# ifdef SICB_ISR0 /* This will be optimized out in UP mode. */ sic_status[0] = bfin_read_SICB_ISR0() & bfin_read_SICB_IMASK0(); sic_status[1] = bfin_read_SICB_ISR1() & bfin_read_SICB_IMASK1(); -#endif +# endif } else { sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0(); sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1(); } -#ifdef CONFIG_BF54x +# ifdef SIC_ISR2 sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2(); -#endif +# endif for (;; ivg++) { if (ivg >= ivg_stop) { atomic_inc(&num_spurious); @@ -1236,20 +1231,16 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) if (likely(vec == EVT_IVTMR_P)) { irq = IRQ_CORETMR; - goto core_tick; - } - SSYNC(); - -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) - { + } else { +#if defined(SIC_ISR0) || defined(SICA_ISR0) unsigned long sic_status[3]; sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0(); sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1(); -#ifdef CONFIG_BF54x +# ifdef SIC_ISR2 sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2(); -#endif +# endif for (;; ivg++) { if (ivg >= ivg_stop) { atomic_inc(&num_spurious); @@ -1258,9 +1249,7 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag) break; } - } #else - { unsigned long sic_status; sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); @@ -1272,15 +1261,13 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) } else if (sic_status & ivg->isrflag) break; } - } #endif - irq = ivg->irqno; + irq = ivg->irqno; + } if (irq == IRQ_SYSTMR) { -#ifdef CONFIG_GENERIC_CLOCKEVENTS -core_tick: -#else +#ifndef CONFIG_GENERIC_CLOCKEVENTS bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */ #endif /* This is basically what we need from the register frame. */ @@ -1292,9 +1279,6 @@ core_tick: __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10; } -#ifndef CONFIG_GENERIC_CLOCKEVENTS -core_tick: -#endif if (this_domain == ipipe_root_domain) { s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status); barrier(); @@ -1312,7 +1296,7 @@ core_tick: } } - return 0; + return 0; } #endif /* CONFIG_IPIPE */ diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 93eab61..6184005 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -43,8 +43,13 @@ #include <asm/processor.h> #include <asm/ptrace.h> #include <asm/cpu.h> +#include <asm/time.h> #include <linux/err.h> +/* + * Anomaly notes: + * 05000120 - we always define corelock as 32-bit integer in L2 + */ struct corelock_slot corelock __attribute__ ((__section__(".l2.bss"))); void __cpuinitdata *init_retx_coreb, *init_saved_retx_coreb, @@ -139,7 +144,7 @@ static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) static irqreturn_t ipi_handler(int irq, void *dev_instance) { - struct ipi_message *msg, *mg; + struct ipi_message *msg; struct ipi_message_queue *msg_queue; unsigned int cpu = smp_processor_id(); @@ -149,7 +154,8 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance) msg_queue->count++; spin_lock(&msg_queue->lock); - list_for_each_entry_safe(msg, mg, &msg_queue->head, list) { + while (!list_empty(&msg_queue->head)) { + msg = list_entry(msg_queue->head.next, typeof(*msg), list); list_del(&msg->list); switch (msg->type) { case BFIN_IPI_RESCHEDULE: @@ -216,7 +222,7 @@ int smp_call_function(void (*func)(void *info), void *info, int wait) for_each_cpu_mask(cpu, callmap) { msg_queue = &per_cpu(ipi_msg_queue, cpu); spin_lock_irqsave(&msg_queue->lock, flags); - list_add(&msg->list, &msg_queue->head); + list_add_tail(&msg->list, &msg_queue->head); spin_unlock_irqrestore(&msg_queue->lock, flags); platform_send_ipi_cpu(cpu); } @@ -256,7 +262,7 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, msg_queue = &per_cpu(ipi_msg_queue, cpu); spin_lock_irqsave(&msg_queue->lock, flags); - list_add(&msg->list, &msg_queue->head); + list_add_tail(&msg->list, &msg_queue->head); spin_unlock_irqrestore(&msg_queue->lock, flags); platform_send_ipi_cpu(cpu); @@ -287,7 +293,7 @@ void smp_send_reschedule(int cpu) msg_queue = &per_cpu(ipi_msg_queue, cpu); spin_lock_irqsave(&msg_queue->lock, flags); - list_add(&msg->list, &msg_queue->head); + list_add_tail(&msg->list, &msg_queue->head); spin_unlock_irqrestore(&msg_queue->lock, flags); platform_send_ipi_cpu(cpu); @@ -315,7 +321,7 @@ void smp_send_stop(void) for_each_cpu_mask(cpu, callmap) { msg_queue = &per_cpu(ipi_msg_queue, cpu); spin_lock_irqsave(&msg_queue->lock, flags); - list_add(&msg->list, &msg_queue->head); + list_add_tail(&msg->list, &msg_queue->head); spin_unlock_irqrestore(&msg_queue->lock, flags); platform_send_ipi_cpu(cpu); } @@ -352,7 +358,7 @@ int __cpuinit __cpu_up(unsigned int cpu) static void __cpuinit setup_secondary(unsigned int cpu) { -#if !(defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)) +#if !defined(CONFIG_TICKSOURCE_GPTMR0) struct irq_desc *timer_desc; #endif unsigned long ilat; @@ -364,16 +370,13 @@ static void __cpuinit setup_secondary(unsigned int cpu) bfin_write_ILAT(ilat); CSYNC(); - /* Reserve the PDA space for the secondary CPU. */ - reserve_pda(); - /* Enable interrupt levels IVG7-15. IARs have been already * programmed by the boot CPU. */ bfin_irq_flags |= IMASK_IVG15 | IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_TICKSOURCE_GPTMR0) /* Power down the core timer, just to play safe. */ bfin_write_TCNTL(0); @@ -466,6 +469,17 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end) } EXPORT_SYMBOL_GPL(smp_icache_flush_range_others); +#ifdef __ARCH_SYNC_CORE_ICACHE +void resync_core_icache(void) +{ + unsigned int cpu = get_cpu(); + blackfin_invalidate_entire_icache(); + ++per_cpu(cpu_data, cpu).icache_invld_count; + put_cpu(); +} +EXPORT_SYMBOL(resync_core_icache); +#endif + #ifdef __ARCH_SYNC_CORE_DCACHE unsigned long barrier_mask __attribute__ ((__section__(".l2.bss"))); |