diff options
Diffstat (limited to 'drivers')
130 files changed, 1285 insertions, 4527 deletions
diff --git a/drivers/base/Makefile b/drivers/base/Makefile index 2c8272d..610f999 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -1,6 +1,6 @@ # Makefile for the Linux device tree -obj-y := core.o sys.o bus.o dd.o syscore.o \ +obj-y := core.o bus.o dd.o syscore.o \ driver.o class.o platform.o \ cpu.o firmware.o init.o map.o devres.o \ attribute_container.o transport_class.o \ diff --git a/drivers/base/core.c b/drivers/base/core.c index 4a67cc0..74dda4f 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -632,6 +632,11 @@ static void klist_children_put(struct klist_node *n) * may be used for reference counting of @dev after calling this * function. * + * All fields in @dev must be initialized by the caller to 0, except + * for those explicitly set to some other value. The simplest + * approach is to use kzalloc() to allocate the structure containing + * @dev. + * * NOTE: Use put_device() to give up your reference instead of freeing * @dev directly once you have called this function. */ @@ -930,6 +935,13 @@ int device_private_init(struct device *dev) * to the global and sibling lists for the device, then * adds it to the other relevant subsystems of the driver model. * + * Do not call this routine or device_register() more than once for + * any device structure. The driver model core is not designed to work + * with devices that get unregistered and then spring back to life. + * (Among other things, it's very hard to guarantee that all references + * to the previous incarnation of @dev have been dropped.) Allocate + * and register a fresh new struct device instead. + * * NOTE: _Never_ directly free @dev after calling this function, even * if it returned an error! Always use put_device() to give up your * reference instead. @@ -1022,7 +1034,7 @@ int device_add(struct device *dev) device_pm_add(dev); /* Notify clients of device addition. This call must come - * after dpm_sysf_add() and before kobject_uevent(). + * after dpm_sysfs_add() and before kobject_uevent(). */ if (dev->bus) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, @@ -1090,6 +1102,9 @@ name_error: * have a clearly defined need to use and refcount the device * before it is added to the hierarchy. * + * For more information, see the kerneldoc for device_initialize() + * and device_add(). + * * NOTE: _Never_ directly free @dev after calling this function, even * if it returned an error! Always use put_device() to give up the * reference initialized in this function instead. diff --git a/drivers/base/sys.c b/drivers/base/sys.c deleted file mode 100644 index 409f5ce..0000000 --- a/drivers/base/sys.c +++ /dev/null @@ -1,383 +0,0 @@ -/* - * sys.c - pseudo-bus for system 'devices' (cpus, PICs, timers, etc) - * - * Copyright (c) 2002-3 Patrick Mochel - * 2002-3 Open Source Development Lab - * - * This file is released under the GPLv2 - * - * This exports a 'system' bus type. - * By default, a 'sys' bus gets added to the root of the system. There will - * always be core system devices. Devices can use sysdev_register() to - * add themselves as children of the system bus. - */ - -#include <linux/sysdev.h> -#include <linux/err.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/pm.h> -#include <linux/device.h> -#include <linux/mutex.h> -#include <linux/interrupt.h> - -#include "base.h" - -#define to_sysdev(k) container_of(k, struct sys_device, kobj) -#define to_sysdev_attr(a) container_of(a, struct sysdev_attribute, attr) - - -static ssize_t -sysdev_show(struct kobject *kobj, struct attribute *attr, char *buffer) -{ - struct sys_device *sysdev = to_sysdev(kobj); - struct sysdev_attribute *sysdev_attr = to_sysdev_attr(attr); - - if (sysdev_attr->show) - return sysdev_attr->show(sysdev, sysdev_attr, buffer); - return -EIO; -} - - -static ssize_t -sysdev_store(struct kobject *kobj, struct attribute *attr, - const char *buffer, size_t count) -{ - struct sys_device *sysdev = to_sysdev(kobj); - struct sysdev_attribute *sysdev_attr = to_sysdev_attr(attr); - - if (sysdev_attr->store) - return sysdev_attr->store(sysdev, sysdev_attr, buffer, count); - return -EIO; -} - -static const struct sysfs_ops sysfs_ops = { - .show = sysdev_show, - .store = sysdev_store, -}; - -static struct kobj_type ktype_sysdev = { - .sysfs_ops = &sysfs_ops, -}; - - -int sysdev_create_file(struct sys_device *s, struct sysdev_attribute *a) -{ - return sysfs_create_file(&s->kobj, &a->attr); -} - - -void sysdev_remove_file(struct sys_device *s, struct sysdev_attribute *a) -{ - sysfs_remove_file(&s->kobj, &a->attr); -} - -EXPORT_SYMBOL_GPL(sysdev_create_file); -EXPORT_SYMBOL_GPL(sysdev_remove_file); - -#define to_sysdev_class(k) container_of(k, struct sysdev_class, kset.kobj) -#define to_sysdev_class_attr(a) container_of(a, \ - struct sysdev_class_attribute, attr) - -static ssize_t sysdev_class_show(struct kobject *kobj, struct attribute *attr, - char *buffer) -{ - struct sysdev_class *class = to_sysdev_class(kobj); - struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr); - - if (class_attr->show) - return class_attr->show(class, class_attr, buffer); - return -EIO; -} - -static ssize_t sysdev_class_store(struct kobject *kobj, struct attribute *attr, - const char *buffer, size_t count) -{ - struct sysdev_class *class = to_sysdev_class(kobj); - struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr); - - if (class_attr->store) - return class_attr->store(class, class_attr, buffer, count); - return -EIO; -} - -static const struct sysfs_ops sysfs_class_ops = { - .show = sysdev_class_show, - .store = sysdev_class_store, -}; - -static struct kobj_type ktype_sysdev_class = { - .sysfs_ops = &sysfs_class_ops, -}; - -int sysdev_class_create_file(struct sysdev_class *c, - struct sysdev_class_attribute *a) -{ - return sysfs_create_file(&c->kset.kobj, &a->attr); -} -EXPORT_SYMBOL_GPL(sysdev_class_create_file); - -void sysdev_class_remove_file(struct sysdev_class *c, - struct sysdev_class_attribute *a) -{ - sysfs_remove_file(&c->kset.kobj, &a->attr); -} -EXPORT_SYMBOL_GPL(sysdev_class_remove_file); - -extern struct kset *system_kset; - -int sysdev_class_register(struct sysdev_class *cls) -{ - int retval; - - pr_debug("Registering sysdev class '%s'\n", cls->name); - - INIT_LIST_HEAD(&cls->drivers); - memset(&cls->kset.kobj, 0x00, sizeof(struct kobject)); - cls->kset.kobj.parent = &system_kset->kobj; - cls->kset.kobj.ktype = &ktype_sysdev_class; - cls->kset.kobj.kset = system_kset; - - retval = kobject_set_name(&cls->kset.kobj, "%s", cls->name); - if (retval) - return retval; - - retval = kset_register(&cls->kset); - if (!retval && cls->attrs) - retval = sysfs_create_files(&cls->kset.kobj, - (const struct attribute **)cls->attrs); - return retval; -} - -void sysdev_class_unregister(struct sysdev_class *cls) -{ - pr_debug("Unregistering sysdev class '%s'\n", - kobject_name(&cls->kset.kobj)); - if (cls->attrs) - sysfs_remove_files(&cls->kset.kobj, - (const struct attribute **)cls->attrs); - kset_unregister(&cls->kset); -} - -EXPORT_SYMBOL_GPL(sysdev_class_register); -EXPORT_SYMBOL_GPL(sysdev_class_unregister); - -static DEFINE_MUTEX(sysdev_drivers_lock); - -/* - * @dev != NULL means that we're unwinding because some drv->add() - * failed for some reason. You need to grab sysdev_drivers_lock before - * calling this. - */ -static void __sysdev_driver_remove(struct sysdev_class *cls, - struct sysdev_driver *drv, - struct sys_device *from_dev) -{ - struct sys_device *dev = from_dev; - - list_del_init(&drv->entry); - if (!cls) - return; - - if (!drv->remove) - goto kset_put; - - if (dev) - list_for_each_entry_continue_reverse(dev, &cls->kset.list, - kobj.entry) - drv->remove(dev); - else - list_for_each_entry(dev, &cls->kset.list, kobj.entry) - drv->remove(dev); - -kset_put: - kset_put(&cls->kset); -} - -/** - * sysdev_driver_register - Register auxiliary driver - * @cls: Device class driver belongs to. - * @drv: Driver. - * - * @drv is inserted into @cls->drivers to be - * called on each operation on devices of that class. The refcount - * of @cls is incremented. - */ -int sysdev_driver_register(struct sysdev_class *cls, struct sysdev_driver *drv) -{ - struct sys_device *dev = NULL; - int err = 0; - - if (!cls) { - WARN(1, KERN_WARNING "sysdev: invalid class passed to %s!\n", - __func__); - return -EINVAL; - } - - /* Check whether this driver has already been added to a class. */ - if (drv->entry.next && !list_empty(&drv->entry)) - WARN(1, KERN_WARNING "sysdev: class %s: driver (%p) has already" - " been registered to a class, something is wrong, but " - "will forge on!\n", cls->name, drv); - - mutex_lock(&sysdev_drivers_lock); - if (cls && kset_get(&cls->kset)) { - list_add_tail(&drv->entry, &cls->drivers); - - /* If devices of this class already exist, tell the driver */ - if (drv->add) { - list_for_each_entry(dev, &cls->kset.list, kobj.entry) { - err = drv->add(dev); - if (err) - goto unwind; - } - } - } else { - err = -EINVAL; - WARN(1, KERN_ERR "%s: invalid device class\n", __func__); - } - - goto unlock; - -unwind: - __sysdev_driver_remove(cls, drv, dev); - -unlock: - mutex_unlock(&sysdev_drivers_lock); - return err; -} - -/** - * sysdev_driver_unregister - Remove an auxiliary driver. - * @cls: Class driver belongs to. - * @drv: Driver. - */ -void sysdev_driver_unregister(struct sysdev_class *cls, - struct sysdev_driver *drv) -{ - mutex_lock(&sysdev_drivers_lock); - __sysdev_driver_remove(cls, drv, NULL); - mutex_unlock(&sysdev_drivers_lock); -} -EXPORT_SYMBOL_GPL(sysdev_driver_register); -EXPORT_SYMBOL_GPL(sysdev_driver_unregister); - -/** - * sysdev_register - add a system device to the tree - * @sysdev: device in question - * - */ -int sysdev_register(struct sys_device *sysdev) -{ - int error; - struct sysdev_class *cls = sysdev->cls; - - if (!cls) - return -EINVAL; - - pr_debug("Registering sys device of class '%s'\n", - kobject_name(&cls->kset.kobj)); - - /* initialize the kobject to 0, in case it had previously been used */ - memset(&sysdev->kobj, 0x00, sizeof(struct kobject)); - - /* Make sure the kset is set */ - sysdev->kobj.kset = &cls->kset; - - /* Register the object */ - error = kobject_init_and_add(&sysdev->kobj, &ktype_sysdev, NULL, - "%s%d", kobject_name(&cls->kset.kobj), - sysdev->id); - - if (!error) { - struct sysdev_driver *drv; - - pr_debug("Registering sys device '%s'\n", - kobject_name(&sysdev->kobj)); - - mutex_lock(&sysdev_drivers_lock); - /* Generic notification is implicit, because it's that - * code that should have called us. - */ - - /* Notify class auxiliary drivers */ - list_for_each_entry(drv, &cls->drivers, entry) { - if (drv->add) - drv->add(sysdev); - } - mutex_unlock(&sysdev_drivers_lock); - kobject_uevent(&sysdev->kobj, KOBJ_ADD); - } - - return error; -} - -void sysdev_unregister(struct sys_device *sysdev) -{ - struct sysdev_driver *drv; - - mutex_lock(&sysdev_drivers_lock); - list_for_each_entry(drv, &sysdev->cls->drivers, entry) { - if (drv->remove) - drv->remove(sysdev); - } - mutex_unlock(&sysdev_drivers_lock); - - kobject_put(&sysdev->kobj); -} - -EXPORT_SYMBOL_GPL(sysdev_register); -EXPORT_SYMBOL_GPL(sysdev_unregister); - -#define to_ext_attr(x) container_of(x, struct sysdev_ext_attribute, attr) - -ssize_t sysdev_store_ulong(struct sys_device *sysdev, - struct sysdev_attribute *attr, - const char *buf, size_t size) -{ - struct sysdev_ext_attribute *ea = to_ext_attr(attr); - char *end; - unsigned long new = simple_strtoul(buf, &end, 0); - if (end == buf) - return -EINVAL; - *(unsigned long *)(ea->var) = new; - /* Always return full write size even if we didn't consume all */ - return size; -} -EXPORT_SYMBOL_GPL(sysdev_store_ulong); - -ssize_t sysdev_show_ulong(struct sys_device *sysdev, - struct sysdev_attribute *attr, - char *buf) -{ - struct sysdev_ext_attribute *ea = to_ext_attr(attr); - return snprintf(buf, PAGE_SIZE, "%lx\n", *(unsigned long *)(ea->var)); -} -EXPORT_SYMBOL_GPL(sysdev_show_ulong); - -ssize_t sysdev_store_int(struct sys_device *sysdev, - struct sysdev_attribute *attr, - const char *buf, size_t size) -{ - struct sysdev_ext_attribute *ea = to_ext_attr(attr); - char *end; - long new = simple_strtol(buf, &end, 0); - if (end == buf || new > INT_MAX || new < INT_MIN) - return -EINVAL; - *(int *)(ea->var) = new; - /* Always return full write size even if we didn't consume all */ - return size; -} -EXPORT_SYMBOL_GPL(sysdev_store_int); - -ssize_t sysdev_show_int(struct sys_device *sysdev, - struct sysdev_attribute *attr, - char *buf) -{ - struct sysdev_ext_attribute *ea = to_ext_attr(attr); - return snprintf(buf, PAGE_SIZE, "%d\n", *(int *)(ea->var)); -} -EXPORT_SYMBOL_GPL(sysdev_show_int); - diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c index 4b71647..317c28c 100644 --- a/drivers/char/agp/backend.c +++ b/drivers/char/agp/backend.c @@ -194,10 +194,10 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge) err_out: if (bridge->driver->needs_scratch_page) { - void *va = page_address(bridge->scratch_page_page); + struct page *page = bridge->scratch_page_page; - bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); - bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); + bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_UNMAP); + bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_FREE); } if (got_gatt) bridge->driver->free_gatt_table(bridge); @@ -221,10 +221,10 @@ static void agp_backend_cleanup(struct agp_bridge_data *bridge) if (bridge->driver->agp_destroy_page && bridge->driver->needs_scratch_page) { - void *va = page_address(bridge->scratch_page_page); + struct page *page = bridge->scratch_page_page; - bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); - bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); + bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_UNMAP); + bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_FREE); } } diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 396e60c..f8625e2 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -140,7 +140,7 @@ int drm_gem_object_init(struct drm_device *dev, obj->dev = dev; obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE); if (IS_ERR(obj->filp)) - return -ENOMEM; + return PTR_ERR(obj->filp); kref_init(&obj->refcount); atomic_set(&obj->handle_count, 0); diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig index f9aaa56..b9e5266 100644 --- a/drivers/gpu/drm/exynos/Kconfig +++ b/drivers/gpu/drm/exynos/Kconfig @@ -13,7 +13,7 @@ config DRM_EXYNOS config DRM_EXYNOS_FIMD tristate "Exynos DRM FIMD" - depends on DRM_EXYNOS + depends on DRM_EXYNOS && !FB_S3C default n help Choose this option if you want to use Exynos FIMD for DRM. @@ -21,7 +21,7 @@ config DRM_EXYNOS_FIMD config DRM_EXYNOS_HDMI tristate "Exynos DRM HDMI" - depends on DRM_EXYNOS + depends on DRM_EXYNOS && !VIDEO_SAMSUNG_S5P_TV help Choose this option if you want to use Exynos HDMI for DRM. If M is selected, the module will be called exynos_drm_hdmi diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index ca83139..b6a737d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -158,7 +158,8 @@ static void fimd_dpms(struct device *subdrv_dev, int mode) case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: - pm_runtime_put_sync(subdrv_dev); + if (!ctx->suspended) + pm_runtime_put_sync(subdrv_dev); break; default: DRM_DEBUG_KMS("unspecified mode %d\n", mode); @@ -734,6 +735,46 @@ static void fimd_clear_win(struct fimd_context *ctx, int win) writel(val, ctx->regs + SHADOWCON); } +static int fimd_power_on(struct fimd_context *ctx, bool enable) +{ + struct exynos_drm_subdrv *subdrv = &ctx->subdrv; + struct device *dev = subdrv->manager.dev; + + DRM_DEBUG_KMS("%s\n", __FILE__); + + if (enable != false && enable != true) + return -EINVAL; + + if (enable) { + int ret; + + ret = clk_enable(ctx->bus_clk); + if (ret < 0) + return ret; + + ret = clk_enable(ctx->lcd_clk); + if (ret < 0) { + clk_disable(ctx->bus_clk); + return ret; + } + + ctx->suspended = false; + + /* if vblank was enabled status, enable it again. */ + if (test_and_clear_bit(0, &ctx->irq_flags)) + fimd_enable_vblank(dev); + + fimd_apply(dev); + } else { + clk_disable(ctx->lcd_clk); + clk_disable(ctx->bus_clk); + + ctx->suspended = true; + } + + return 0; +} + static int __devinit fimd_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -911,39 +952,30 @@ out: #ifdef CONFIG_PM_SLEEP static int fimd_suspend(struct device *dev) { - int ret; + struct fimd_context *ctx = get_fimd_context(dev); if (pm_runtime_suspended(dev)) return 0; - ret = pm_runtime_suspend(dev); - if (ret < 0) - return ret; - - return 0; + /* + * do not use pm_runtime_suspend(). if pm_runtime_suspend() is + * called here, an error would be returned by that interface + * because the usage_count of pm runtime is more than 1. + */ + return fimd_power_on(ctx, false); } static int fimd_resume(struct device *dev) { - int ret; - - ret = pm_runtime_resume(dev); - if (ret < 0) { - DRM_ERROR("failed to resume runtime pm.\n"); - return ret; - } - - pm_runtime_disable(dev); - - ret = pm_runtime_set_active(dev); - if (ret < 0) { - DRM_ERROR("failed to active runtime pm.\n"); - pm_runtime_enable(dev); - pm_runtime_suspend(dev); - return ret; - } + struct fimd_context *ctx = get_fimd_context(dev); - pm_runtime_enable(dev); + /* + * if entered to sleep when lcd panel was on, the usage_count + * of pm runtime would still be 1 so in this case, fimd driver + * should be on directly not drawing on pm runtime interface. + */ + if (!pm_runtime_suspended(dev)) + return fimd_power_on(ctx, true); return 0; } @@ -956,39 +988,16 @@ static int fimd_runtime_suspend(struct device *dev) DRM_DEBUG_KMS("%s\n", __FILE__); - clk_disable(ctx->lcd_clk); - clk_disable(ctx->bus_clk); - - ctx->suspended = true; - return 0; + return fimd_power_on(ctx, false); } static int fimd_runtime_resume(struct device *dev) { struct fimd_context *ctx = get_fimd_context(dev); - int ret; DRM_DEBUG_KMS("%s\n", __FILE__); - ret = clk_enable(ctx->bus_clk); - if (ret < 0) - return ret; - - ret = clk_enable(ctx->lcd_clk); - if (ret < 0) { - clk_disable(ctx->bus_clk); - return ret; - } - - ctx->suspended = false; - - /* if vblank was enabled status, enable it again. */ - if (test_and_clear_bit(0, &ctx->irq_flags)) - fimd_enable_vblank(dev); - - fimd_apply(dev); - - return 0; + return fimd_power_on(ctx, true); } #endif diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index f48f7ce..3429d3f 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1116,8 +1116,8 @@ err_ddc: err_iomap: iounmap(hdata->regs); err_req_region: - release_resource(hdata->regs_res); - kfree(hdata->regs_res); + release_mem_region(hdata->regs_res->start, + resource_size(hdata->regs_res)); err_resource: hdmi_resources_cleanup(hdata); err_data: @@ -1145,8 +1145,8 @@ static int __devexit hdmi_remove(struct platform_device *pdev) iounmap(hdata->regs); - release_resource(hdata->regs_res); - kfree(hdata->regs_res); + release_mem_region(hdata->regs_res->start, + resource_size(hdata->regs_res)); /* hdmiphy i2c driver */ i2c_del_driver(&hdmiphy_driver); diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c index 791c0ef..830dfdd6b 100644 --- a/drivers/gpu/drm/gma500/framebuffer.c +++ b/drivers/gpu/drm/gma500/framebuffer.c @@ -113,12 +113,12 @@ static int psbfb_pan(struct fb_var_screeninfo *var, struct fb_info *info) void psbfb_suspend(struct drm_device *dev) { - struct drm_framebuffer *fb = 0; - struct psb_framebuffer *psbfb = to_psb_fb(fb); + struct drm_framebuffer *fb; console_lock(); mutex_lock(&dev->mode_config.mutex); list_for_each_entry(fb, &dev->mode_config.fb_list, head) { + struct psb_framebuffer *psbfb = to_psb_fb(fb); struct fb_info *info = psbfb->fbdev; fb_set_suspend(info, 1); drm_fb_helper_blank(FB_BLANK_POWERDOWN, info); @@ -129,12 +129,12 @@ void psbfb_suspend(struct drm_device *dev) void psbfb_resume(struct drm_device *dev) { - struct drm_framebuffer *fb = 0; - struct psb_framebuffer *psbfb = to_psb_fb(fb); + struct drm_framebuffer *fb; console_lock(); mutex_lock(&dev->mode_config.mutex); list_for_each_entry(fb, &dev->mode_config.fb_list, head) { + struct psb_framebuffer *psbfb = to_psb_fb(fb); struct fb_info *info = psbfb->fbdev; fb_set_suspend(info, 0); drm_fb_helper_blank(FB_BLANK_UNBLANK, info); diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c index f7c17b2..7f4b4e1 100644 --- a/drivers/gpu/drm/i810/i810_dma.c +++ b/drivers/gpu/drm/i810/i810_dma.c @@ -886,7 +886,7 @@ static int i810_flush_queue(struct drm_device *dev) } /* Must be called with the lock held */ -void i810_driver_reclaim_buffers(struct drm_device *dev, +static void i810_reclaim_buffers(struct drm_device *dev, struct drm_file *file_priv) { struct drm_device_dma *dma = dev->dma; @@ -1223,17 +1223,12 @@ void i810_driver_preclose(struct drm_device *dev, struct drm_file *file_priv) if (dev_priv->page_flipping) i810_do_cleanup_pageflip(dev); } +} - if (file_priv->master && file_priv->master->lock.hw_lock) { - drm_idlelock_take(&file_priv->master->lock); - i810_driver_reclaim_buffers(dev, file_priv); - drm_idlelock_release(&file_priv->master->lock); - } else { - /* master disappeared, clean up stuff anyway and hope nothing - * goes wrong */ - i810_driver_reclaim_buffers(dev, file_priv); - } - +void i810_driver_reclaim_buffers_locked(struct drm_device *dev, + struct drm_file *file_priv) +{ + i810_reclaim_buffers(dev, file_priv); } int i810_driver_dma_quiescent(struct drm_device *dev) diff --git a/drivers/gpu/drm/i810/i810_drv.c b/drivers/gpu/drm/i810/i810_drv.c index 053f1ee..ec12f7d 100644 --- a/drivers/gpu/drm/i810/i810_drv.c +++ b/drivers/gpu/drm/i810/i810_drv.c @@ -63,6 +63,7 @@ static struct drm_driver driver = { .lastclose = i810_driver_lastclose, .preclose = i810_driver_preclose, .device_is_agp = i810_driver_device_is_agp, + .reclaim_buffers_locked = i810_driver_reclaim_buffers_locked, .dma_quiescent = i810_driver_dma_quiescent, .ioctls = i810_ioctls, .fops = &i810_driver_fops, diff --git a/drivers/gpu/drm/i810/i810_drv.h b/drivers/gpu/drm/i810/i810_drv.h index 6e0acad..c9339f4 100644 --- a/drivers/gpu/drm/i810/i810_drv.h +++ b/drivers/gpu/drm/i810/i810_drv.h @@ -116,12 +116,14 @@ typedef struct drm_i810_private { /* i810_dma.c */ extern int i810_driver_dma_quiescent(struct drm_device *dev); -void i810_driver_reclaim_buffers(struct drm_device *dev, - struct drm_file *file_priv); +extern void i810_driver_reclaim_buffers_locked(struct drm_device *dev, + struct drm_file *file_priv); extern int i810_driver_load(struct drm_device *, unsigned long flags); extern void i810_driver_lastclose(struct drm_device *dev); extern void i810_driver_preclose(struct drm_device *dev, struct drm_file *file_priv); +extern void i810_driver_reclaim_buffers_locked(struct drm_device *dev, + struct drm_file *file_priv); extern int i810_driver_device_is_agp(struct drm_device *dev); extern long i810_ioctl(struct file *file, unsigned int cmd, unsigned long arg); diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 1180798..deaa657 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -121,11 +121,11 @@ static const char *cache_level_str(int type) static void describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj) { - seq_printf(m, "%p: %s%s %8zd %04x %04x %d %d%s%s%s", + seq_printf(m, "%p: %s%s %8zdKiB %04x %04x %d %d%s%s%s", &obj->base, get_pin_flag(obj), get_tiling_flag(obj), - obj->base.size, + obj->base.size / 1024, obj->base.read_domains, obj->base.write_domain, obj->last_rendering_seqno, @@ -653,7 +653,7 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data) seq_printf(m, " Size : %08x\n", ring->size); seq_printf(m, " Active : %08x\n", intel_ring_get_active_head(ring)); seq_printf(m, " NOPID : %08x\n", I915_READ_NOPID(ring)); - if (IS_GEN6(dev)) { + if (IS_GEN6(dev) || IS_GEN7(dev)) { seq_printf(m, " Sync 0 : %08x\n", I915_READ_SYNC_0(ring)); seq_printf(m, " Sync 1 : %08x\n", I915_READ_SYNC_1(ring)); } @@ -1075,6 +1075,7 @@ static int gen6_drpc_info(struct seq_file *m) struct drm_device *dev = node->minor->dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 rpmodectl1, gt_core_status, rcctl1; + unsigned forcewake_count; int count=0, ret; @@ -1082,9 +1083,13 @@ static int gen6_drpc_info(struct seq_file *m) if (ret) return ret; - if (atomic_read(&dev_priv->forcewake_count)) { - seq_printf(m, "RC information inaccurate because userspace " - "holds a reference \n"); + spin_lock_irq(&dev_priv->gt_lock); + forcewake_count = dev_priv->forcewake_count; + spin_unlock_irq(&dev_priv->gt_lock); + + if (forcewake_count) { + seq_printf(m, "RC information inaccurate because somebody " + "holds a forcewake reference \n"); } else { /* NB: we cannot use forcewake, else we read the wrong values */ while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1)) @@ -1106,7 +1111,7 @@ static int gen6_drpc_info(struct seq_file *m) seq_printf(m, "SW control enabled: %s\n", yesno((rpmodectl1 & GEN6_RP_MEDIA_MODE_MASK) == GEN6_RP_MEDIA_SW_MODE)); - seq_printf(m, "RC6 Enabled: %s\n", + seq_printf(m, "RC1e Enabled: %s\n", yesno(rcctl1 & GEN6_RC_CTL_RC1e_ENABLE)); seq_printf(m, "RC6 Enabled: %s\n", yesno(rcctl1 & GEN6_RC_CTL_RC6_ENABLE)); @@ -1398,9 +1403,13 @@ static int i915_gen6_forcewake_count_info(struct seq_file *m, void *data) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; struct drm_i915_private *dev_priv = dev->dev_private; + unsigned forcewake_count; + + spin_lock_irq(&dev_priv->gt_lock); + forcewake_count = dev_priv->forcewake_count; + spin_unlock_irq(&dev_priv->gt_lock); - seq_printf(m, "forcewake count = %d\n", - atomic_read(&dev_priv->forcewake_count)); + seq_printf(m, "forcewake count = %u\n", forcewake_count); return 0; } @@ -1665,7 +1674,7 @@ static int i915_forcewake_open(struct inode *inode, struct file *file) struct drm_i915_private *dev_priv = dev->dev_private; int ret; - if (!IS_GEN6(dev)) + if (INTEL_INFO(dev)->gen < 6) return 0; ret = mutex_lock_interruptible(&dev->struct_mutex); @@ -1682,7 +1691,7 @@ int i915_forcewake_release(struct inode *inode, struct file *file) struct drm_device *dev = inode->i_private; struct drm_i915_private *dev_priv = dev->dev_private; - if (!IS_GEN6(dev)) + if (INTEL_INFO(dev)->gen < 6) return 0; /* diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 5f4d589..ddfe3d9 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -2045,6 +2045,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) if (!IS_I945G(dev) && !IS_I945GM(dev)) pci_enable_msi(dev->pdev); + spin_lock_init(&dev_priv->gt_lock); spin_lock_init(&dev_priv->irq_lock); spin_lock_init(&dev_priv->error_lock); spin_lock_init(&dev_priv->rps_lock); diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 8f71879..308f819 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -368,11 +368,12 @@ void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv) */ void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) { - WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex)); + unsigned long irqflags; - /* Forcewake is atomic in case we get in here without the lock */ - if (atomic_add_return(1, &dev_priv->forcewake_count) == 1) + spin_lock_irqsave(&dev_priv->gt_lock, irqflags); + if (dev_priv->forcewake_count++ == 0) dev_priv->display.force_wake_get(dev_priv); + spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); } void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) @@ -392,10 +393,12 @@ void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv) */ void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) { - WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex)); + unsigned long irqflags; - if (atomic_dec_and_test(&dev_priv->forcewake_count)) + spin_lock_irqsave(&dev_priv->gt_lock, irqflags); + if (--dev_priv->forcewake_count == 0) dev_priv->display.force_wake_put(dev_priv); + spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); } void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv) @@ -597,9 +600,36 @@ static int ironlake_do_reset(struct drm_device *dev, u8 flags) static int gen6_do_reset(struct drm_device *dev, u8 flags) { struct drm_i915_private *dev_priv = dev->dev_private; + int ret; + unsigned long irqflags; - I915_WRITE(GEN6_GDRST, GEN6_GRDOM_FULL); - return wait_for((I915_READ(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500); + /* Hold gt_lock across reset to prevent any register access + * with forcewake not set correctly + */ + spin_lock_irqsave(&dev_priv->gt_lock, irqflags); + + /* Reset the chip */ + + /* GEN6_GDRST is not in the gt power well, no need to check + * for fifo space for the write or forcewake the chip for + * the read + */ + I915_WRITE_NOTRACE(GEN6_GDRST, GEN6_GRDOM_FULL); + + /* Spin waiting for the device to ack the reset request */ + ret = wait_for((I915_READ_NOTRACE(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500); + + /* If reset with a user forcewake, try to restore, otherwise turn it off */ + if (dev_priv->forcewake_count) + dev_priv->display.force_wake_get(dev_priv); + else + dev_priv->display.force_wake_put(dev_priv); + + /* Restore fifo count */ + dev_priv->gt_fifo_count = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES); + + spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); + return ret; } /** @@ -643,9 +673,6 @@ int i915_reset(struct drm_device *dev, u8 flags) case 7: case 6: ret = gen6_do_reset(dev, flags); - /* If reset with a user forcewake, try to restore */ - if (atomic_read(&dev_priv->forcewake_count)) - __gen6_gt_force_wake_get(dev_priv); break; case 5: ret = ironlake_do_reset(dev, flags); @@ -927,9 +954,14 @@ MODULE_LICENSE("GPL and additional rights"); u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \ u##x val = 0; \ if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \ - gen6_gt_force_wake_get(dev_priv); \ + unsigned long irqflags; \ + spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \ + if (dev_priv->forcewake_count == 0) \ + dev_priv->display.force_wake_get(dev_priv); \ val = read##y(dev_priv->regs + reg); \ - gen6_gt_force_wake_put(dev_priv); \ + if (dev_priv->forcewake_count == 0) \ + dev_priv->display.force_wake_put(dev_priv); \ + spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \ } else { \ val = read##y(dev_priv->regs + reg); \ } \ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 602bc80..9689ca3 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -288,7 +288,13 @@ typedef struct drm_i915_private { int relative_constants_mode; void __iomem *regs; - u32 gt_fifo_count; + /** gt_fifo_count and the subsequent register write are synchronized + * with dev->struct_mutex. */ + unsigned gt_fifo_count; + /** forcewake_count is protected by gt_lock */ + unsigned forcewake_count; + /** gt_lock is also taken in irq contexts. */ + struct spinlock gt_lock; struct intel_gmbus { struct i2c_adapter adapter; @@ -741,8 +747,6 @@ typedef struct drm_i915_private { struct drm_property *broadcast_rgb_property; struct drm_property *force_audio_property; - - atomic_t forcewake_count; } drm_i915_private_t; enum i915_cache_level { diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 5d433fc..5bd4361 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1751,7 +1751,8 @@ static void ironlake_irq_preinstall(struct drm_device *dev) INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work); I915_WRITE(HWSTAM, 0xeffe); - if (IS_GEN6(dev) || IS_GEN7(dev)) { + + if (IS_GEN6(dev)) { /* Workaround stalls observed on Sandy Bridge GPUs by * making the blitter command streamer generate a * write to the Hardware Status Page for diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 7886e4f..2b5eb22 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -28,14 +28,19 @@ #include "drm.h" #include "i915_drm.h" #include "intel_drv.h" +#include "i915_reg.h" static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) { struct drm_i915_private *dev_priv = dev->dev_private; u32 dpll_reg; + /* On IVB, 3rd pipe shares PLL with another one */ + if (pipe > 1) + return false; + if (HAS_PCH_SPLIT(dev)) - dpll_reg = (pipe == PIPE_A) ? _PCH_DPLL_A : _PCH_DPLL_B; + dpll_reg = PCH_DPLL(pipe); else dpll_reg = (pipe == PIPE_A) ? _DPLL_A : _DPLL_B; @@ -822,7 +827,7 @@ int i915_save_state(struct drm_device *dev) if (IS_IRONLAKE_M(dev)) ironlake_disable_drps(dev); - if (IS_GEN6(dev)) + if (INTEL_INFO(dev)->gen >= 6) gen6_disable_rps(dev); /* Cache mode state */ @@ -881,7 +886,7 @@ int i915_restore_state(struct drm_device *dev) intel_init_emon(dev); } - if (IS_GEN6(dev)) { + if (INTEL_INFO(dev)->gen >= 6) { gen6_enable_rps(dev_priv); gen6_update_ring_freq(dev_priv); } diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h index 8af3735..dbda6e3 100644 --- a/drivers/gpu/drm/i915/intel_bios.h +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -467,8 +467,12 @@ struct edp_link_params { struct bdb_edp { struct edp_power_seq power_seqs[16]; u32 color_depth; - u32 sdrrs_msa_timing_delay; struct edp_link_params link_params[16]; + u32 sdrrs_msa_timing_delay; + + /* ith bit indicates enabled/disabled for (i+1)th panel */ + u16 edp_s3d_feature; + u16 edp_t3_optimization; } __attribute__ ((packed)); void intel_setup_bios(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index fee0ad0..dd729d4 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -24,6 +24,7 @@ * Eric Anholt <eric@anholt.net> */ +#include <linux/dmi.h> #include <linux/i2c.h> #include <linux/slab.h> #include "drmP.h" @@ -540,6 +541,24 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = { .destroy = intel_encoder_destroy, }; +static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id) +{ + DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident); + return 1; +} + +static const struct dmi_system_id intel_no_crt[] = { + { + .callback = intel_no_crt_dmi_callback, + .ident = "ACER ZGB", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ACER"), + DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"), + }, + }, + { } +}; + void intel_crt_init(struct drm_device *dev) { struct drm_connector *connector; @@ -547,6 +566,10 @@ void intel_crt_init(struct drm_device *dev) struct intel_connector *intel_connector; struct drm_i915_private *dev_priv = dev->dev_private; + /* Skip machines without VGA that falsely report hotplug events */ + if (dmi_check_system(intel_no_crt)) + return; + crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL); if (!crt) return; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2a3f707..b3b51c4 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5808,12 +5808,15 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, if (is_lvds) { temp = I915_READ(PCH_LVDS); temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; - if (HAS_PCH_CPT(dev)) + if (HAS_PCH_CPT(dev)) { + temp &= ~PORT_TRANS_SEL_MASK; temp |= PORT_TRANS_SEL_CPT(pipe); - else if (pipe == 1) - temp |= LVDS_PIPEB_SELECT; - else - temp &= ~LVDS_PIPEB_SELECT; + } else { + if (pipe == 1) + temp |= LVDS_PIPEB_SELECT; + else + temp &= ~LVDS_PIPEB_SELECT; + } /* set the corresponsding LVDS_BORDER bit */ temp |= dev_priv->lvds_border_bits; @@ -9025,12 +9028,9 @@ void intel_modeset_init(struct drm_device *dev) for (i = 0; i < dev_priv->num_pipe; i++) { intel_crtc_init(dev, i); - if (HAS_PCH_SPLIT(dev)) { - ret = intel_plane_init(dev, i); - if (ret) - DRM_ERROR("plane %d init failed: %d\n", - i, ret); - } + ret = intel_plane_init(dev, i); + if (ret) + DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret); } /* Just disable it once at startup */ diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index e441911..798f6e1 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -708,6 +708,14 @@ static const struct dmi_system_id intel_no_lvds[] = { }, }, { + .callback = intel_no_lvds_dmi_callback, + .ident = "Clientron E830", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Clientron"), + DMI_MATCH(DMI_PRODUCT_NAME, "E830"), + }, + }, + { .callback = intel_no_lvds_dmi_callback, .ident = "Asus EeeBox PC EB1007", .matches = { diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 77e729d..1ab842c 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -636,6 +636,19 @@ render_ring_add_request(struct intel_ring_buffer *ring, } static u32 +gen6_ring_get_seqno(struct intel_ring_buffer *ring) +{ + struct drm_device *dev = ring->dev; + + /* Workaround to force correct ordering between irq and seqno writes on + * ivb (and maybe also on snb) by reading from a CS register (like + * ACTHD) before reading the status page. */ + if (IS_GEN7(dev)) + intel_ring_get_active_head(ring); + return intel_read_status_page(ring, I915_GEM_HWS_INDEX); +} + +static u32 ring_get_seqno(struct intel_ring_buffer *ring) { return intel_read_status_page(ring, I915_GEM_HWS_INDEX); @@ -792,17 +805,6 @@ ring_add_request(struct intel_ring_buffer *ring, } static bool -gen7_blt_ring_get_irq(struct intel_ring_buffer *ring) -{ - /* The BLT ring on IVB appears to have broken synchronization - * between the seqno write and the interrupt, so that the - * interrupt appears first. Returning false here makes - * i915_wait_request() do a polling loop, instead. - */ - return false; -} - -static bool gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag) { struct drm_device *dev = ring->dev; @@ -811,6 +813,12 @@ gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag) if (!dev->irq_enabled) return false; + /* It looks like we need to prevent the gt from suspending while waiting + * for an notifiy irq, otherwise irqs seem to get lost on at least the + * blt/bsd rings on ivb. */ + if (IS_GEN7(dev)) + gen6_gt_force_wake_get(dev_priv); + spin_lock(&ring->irq_lock); if (ring->irq_refcount++ == 0) { ring->irq_mask &= ~rflag; @@ -835,6 +843,9 @@ gen6_ring_put_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag) ironlake_disable_irq(dev_priv, gflag); } spin_unlock(&ring->irq_lock); + + if (IS_GEN7(dev)) + gen6_gt_force_wake_put(dev_priv); } static bool @@ -1341,7 +1352,7 @@ static const struct intel_ring_buffer gen6_bsd_ring = { .write_tail = gen6_bsd_ring_write_tail, .flush = gen6_ring_flush, .add_request = gen6_add_request, - .get_seqno = ring_get_seqno, + .get_seqno = gen6_ring_get_seqno, .irq_get = gen6_bsd_ring_get_irq, .irq_put = gen6_bsd_ring_put_irq, .dispatch_execbuffer = gen6_ring_dispatch_execbuffer, @@ -1476,7 +1487,7 @@ static const struct intel_ring_buffer gen6_blt_ring = { .write_tail = ring_write_tail, .flush = blt_ring_flush, .add_request = gen6_add_request, - .get_seqno = ring_get_seqno, + .get_seqno = gen6_ring_get_seqno, .irq_get = blt_ring_get_irq, .irq_put = blt_ring_put_irq, .dispatch_execbuffer = gen6_ring_dispatch_execbuffer, @@ -1499,6 +1510,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev) ring->flush = gen6_render_ring_flush; ring->irq_get = gen6_render_ring_get_irq; ring->irq_put = gen6_render_ring_put_irq; + ring->get_seqno = gen6_ring_get_seqno; } else if (IS_GEN5(dev)) { ring->add_request = pc_render_add_request; ring->get_seqno = pc_render_get_seqno; @@ -1577,8 +1589,5 @@ int intel_init_blt_ring_buffer(struct drm_device *dev) *ring = gen6_blt_ring; - if (IS_GEN7(dev)) - ring->irq_get = gen7_blt_ring_get_irq; - return intel_init_ring_buffer(dev, ring); } diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index f7b9268..e334ec3 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1066,15 +1066,13 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, /* Set the SDVO control regs. */ if (INTEL_INFO(dev)->gen >= 4) { - sdvox = 0; + /* The real mode polarity is set by the SDVO commands, using + * struct intel_sdvo_dtd. */ + sdvox = SDVO_VSYNC_ACTIVE_HIGH | SDVO_HSYNC_ACTIVE_HIGH; if (intel_sdvo->is_hdmi) sdvox |= intel_sdvo->color_range; if (INTEL_INFO(dev)->gen < 5) sdvox |= SDVO_BORDER_ENABLE; - if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) - sdvox |= SDVO_VSYNC_ACTIVE_HIGH; - if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) - sdvox |= SDVO_HSYNC_ACTIVE_HIGH; } else { sdvox = I915_READ(intel_sdvo->sdvo_reg); switch (intel_sdvo->sdvo_reg) { diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index d13989f..2288abf 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -466,10 +466,8 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, mutex_lock(&dev->struct_mutex); ret = intel_pin_and_fence_fb_obj(dev, obj, NULL); - if (ret) { - DRM_ERROR("failed to pin object\n"); + if (ret) goto out_unlock; - } intel_plane->obj = obj; @@ -632,10 +630,8 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe) unsigned long possible_crtcs; int ret; - if (!(IS_GEN6(dev) || IS_GEN7(dev))) { - DRM_ERROR("new plane code only for SNB+\n"); + if (!(IS_GEN6(dev) || IS_GEN7(dev))) return -ENODEV; - } intel_plane = kzalloc(sizeof(struct intel_plane), GFP_KERNEL); if (!intel_plane) diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index f3c6a9a..1571be3 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -417,7 +417,7 @@ static const struct tv_mode tv_modes[] = { { .name = "NTSC-M", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */ @@ -460,7 +460,7 @@ static const struct tv_mode tv_modes[] = { { .name = "NTSC-443", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 4.43MHz */ @@ -502,7 +502,7 @@ static const struct tv_mode tv_modes[] = { { .name = "NTSC-J", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -545,7 +545,7 @@ static const struct tv_mode tv_modes[] = { { .name = "PAL-M", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -589,7 +589,7 @@ static const struct tv_mode tv_modes[] = { /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */ .name = "PAL-N", .clock = 108000, - .refresh = 25000, + .refresh = 50000, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -634,7 +634,7 @@ static const struct tv_mode tv_modes[] = { /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */ .name = "PAL", .clock = 108000, - .refresh = 25000, + .refresh = 50000, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -674,78 +674,6 @@ static const struct tv_mode tv_modes[] = { .filter_table = filter_table, }, { - .name = "480p@59.94Hz", - .clock = 107520, - .refresh = 59940, - .oversample = TV_OVERSAMPLE_4X, - .component_only = 1, - - .hsync_end = 64, .hblank_end = 122, - .hblank_start = 842, .htotal = 857, - - .progressive = true, .trilevel_sync = false, - - .vsync_start_f1 = 12, .vsync_start_f2 = 12, - .vsync_len = 12, - - .veq_ena = false, - - .vi_end_f1 = 44, .vi_end_f2 = 44, - .nbr_end = 479, - - .burst_ena = false, - - .filter_table = filter_table, - }, - { - .name = "480p@60Hz", - .clock = 107520, - .refresh = 60000, - .oversample = TV_OVERSAMPLE_4X, - .component_only = 1, - - .hsync_end = 64, .hblank_end = 122, - .hblank_start = 842, .htotal = 856, - - .progressive = true, .trilevel_sync = false, - - .vsync_start_f1 = 12, .vsync_start_f2 = 12, - .vsync_len = 12, - - .veq_ena = false, - - .vi_end_f1 = 44, .vi_end_f2 = 44, - .nbr_end = 479, - - .burst_ena = false, - - .filter_table = filter_table, - }, - { - .name = "576p", - .clock = 107520, - .refresh = 50000, - .oversample = TV_OVERSAMPLE_4X, - .component_only = 1, - - .hsync_end = 64, .hblank_end = 139, - .hblank_start = 859, .htotal = 863, - - .progressive = true, .trilevel_sync = false, - - .vsync_start_f1 = 10, .vsync_start_f2 = 10, - .vsync_len = 10, - - .veq_ena = false, - - .vi_end_f1 = 48, .vi_end_f2 = 48, - .nbr_end = 575, - - .burst_ena = false, - - .filter_table = filter_table, - }, - { .name = "720p@60Hz", .clock = 148800, .refresh = 60000, @@ -770,30 +698,6 @@ static const struct tv_mode tv_modes[] = { .filter_table = filter_table, }, { - .name = "720p@59.94Hz", - .clock = 148800, - .refresh = 59940, - .oversample = TV_OVERSAMPLE_2X, - .component_only = 1, - - .hsync_end = 80, .hblank_end = 300, - .hblank_start = 1580, .htotal = 1651, - - .progressive = true, .trilevel_sync = true, - - .vsync_start_f1 = 10, .vsync_start_f2 = 10, - .vsync_len = 10, - - .veq_ena = false, - - .vi_end_f1 = 29, .vi_end_f2 = 29, - .nbr_end = 719, - - .burst_ena = false, - - .filter_table = filter_table, - }, - { .name = "720p@50Hz", .clock = 148800, .refresh = 50000, @@ -821,7 +725,7 @@ static const struct tv_mode tv_modes[] = { { .name = "1080i@50Hz", .clock = 148800, - .refresh = 25000, + .refresh = 50000, .oversample = TV_OVERSAMPLE_2X, .component_only = 1, @@ -847,7 +751,7 @@ static const struct tv_mode tv_modes[] = { { .name = "1080i@60Hz", .clock = 148800, - .refresh = 30000, + .refresh = 60000, .oversample = TV_OVERSAMPLE_2X, .component_only = 1, @@ -870,32 +774,6 @@ static const struct tv_mode tv_modes[] = { .filter_table = filter_table, }, - { - .name = "1080i@59.94Hz", - .clock = 148800, - .refresh = 29970, - .oversample = TV_OVERSAMPLE_2X, - .component_only = 1, - - .hsync_end = 88, .hblank_end = 235, - .hblank_start = 2155, .htotal = 2201, - - .progressive = false, .trilevel_sync = true, - - .vsync_start_f1 = 4, .vsync_start_f2 = 5, - .vsync_len = 10, - - .veq_ena = true, .veq_start_f1 = 4, - .veq_start_f2 = 4, .veq_len = 10, - - - .vi_end_f1 = 21, .vi_end_f2 = 22, - .nbr_end = 539, - - .burst_ena = false, - - .filter_table = filter_table, - }, }; static struct intel_tv *enc_to_intel_tv(struct drm_encoder *encoder) diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c index 7bb1b07..e2a393f 100644 --- a/drivers/gpu/drm/radeon/radeon_i2c.c +++ b/drivers/gpu/drm/radeon/radeon_i2c.c @@ -897,6 +897,7 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev, i2c->rec = *rec; i2c->adapter.owner = THIS_MODULE; i2c->adapter.class = I2C_CLASS_DDC; + i2c->adapter.dev.parent = &dev->pdev->dev; i2c->dev = dev; i2c_set_adapdata(&i2c->adapter, i2c); if (rec->mm_i2c || diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 0af6ebd..b66ef0e 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -378,7 +378,7 @@ int vmw_framebuffer_create_handle(struct drm_framebuffer *fb, unsigned int *handle) { if (handle) - handle = 0; + *handle = 0; return 0; } diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c index 92f9497..6dbfd3e 100644 --- a/drivers/hwmon/f71805f.c +++ b/drivers/hwmon/f71805f.c @@ -283,11 +283,11 @@ static inline long temp_from_reg(u8 reg) static inline u8 temp_to_reg(long val) { - if (val < 0) - val = 0; - else if (val > 1000 * 0xff) - val = 0xff; - return ((val + 500) / 1000); + if (val <= 0) + return 0; + if (val >= 1000 * 0xff) + return 0xff; + return (val + 500) / 1000; } /* diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index 6ddeae0..91fdd1f 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -883,7 +883,7 @@ static int sht15_invalidate_voltage(struct notifier_block *nb, static int __devinit sht15_probe(struct platform_device *pdev) { - int ret = 0; + int ret; struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL); u8 status = 0; @@ -901,6 +901,7 @@ static int __devinit sht15_probe(struct platform_device *pdev) init_waitqueue_head(&data->wait_queue); if (pdev->dev.platform_data == NULL) { + ret = -EINVAL; dev_err(&pdev->dev, "no platform data supplied\n"); goto err_free_data; } diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 0e0af04..2dfae7d 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -1319,6 +1319,7 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr, { struct w83627ehf_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + struct w83627ehf_sio_data *sio_data = dev->platform_data; int nr = sensor_attr->index; unsigned long val; int err; @@ -1330,6 +1331,11 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr, if (val > 1) return -EINVAL; + + /* On NCT67766F, DC mode is only supported for pwm1 */ + if (sio_data->kind == nct6776 && nr && val != 1) + return -EINVAL; + mutex_lock(&data->update_lock); reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]); data->pwm_mode[nr] = val; diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index 63be60b..86cc3f7 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -26,35 +26,9 @@ #define to_mcp(d) container_of(d, struct mcp, attached_device) #define to_mcp_driver(d) container_of(d, struct mcp_driver, drv) -static const struct mcp_device_id *mcp_match_id(const struct mcp_device_id *id, - const char *codec) -{ - while (id->name[0]) { - if (strcmp(codec, id->name) == 0) - return id; - id++; - } - return NULL; -} - -const struct mcp_device_id *mcp_get_device_id(const struct mcp *mcp) -{ - const struct mcp_driver *driver = - to_mcp_driver(mcp->attached_device.driver); - - return mcp_match_id(driver->id_table, mcp->codec); -} -EXPORT_SYMBOL(mcp_get_device_id); - static int mcp_bus_match(struct device *dev, struct device_driver *drv) { - const struct mcp *mcp = to_mcp(dev); - const struct mcp_driver *driver = to_mcp_driver(drv); - - if (driver->id_table) - return !!mcp_match_id(driver->id_table, mcp->codec); - - return 0; + return 1; } static int mcp_bus_probe(struct device *dev) @@ -100,18 +74,9 @@ static int mcp_bus_resume(struct device *dev) return ret; } -static int mcp_bus_uevent(struct device *dev, struct kobj_uevent_env *env) -{ - struct mcp *mcp = to_mcp(dev); - - add_uevent_var(env, "MODALIAS=%s%s", MCP_MODULE_PREFIX, mcp->codec); - return 0; -} - static struct bus_type mcp_bus_type = { .name = "mcp", .match = mcp_bus_match, - .uevent = mcp_bus_uevent, .probe = mcp_bus_probe, .remove = mcp_bus_remove, .suspend = mcp_bus_suspend, @@ -128,9 +93,11 @@ static struct bus_type mcp_bus_type = { */ void mcp_set_telecom_divisor(struct mcp *mcp, unsigned int div) { - spin_lock_irq(&mcp->lock); + unsigned long flags; + + spin_lock_irqsave(&mcp->lock, flags); mcp->ops->set_telecom_divisor(mcp, div); - spin_unlock_irq(&mcp->lock); + spin_unlock_irqrestore(&mcp->lock, flags); } EXPORT_SYMBOL(mcp_set_telecom_divisor); @@ -143,9 +110,11 @@ EXPORT_SYMBOL(mcp_set_telecom_divisor); */ void mcp_set_audio_divisor(struct mcp *mcp, unsigned int div) { - spin_lock_irq(&mcp->lock); + unsigned long flags; + + spin_lock_irqsave(&mcp->lock, flags); mcp->ops->set_audio_divisor(mcp, div); - spin_unlock_irq(&mcp->lock); + spin_unlock_irqrestore(&mcp->lock, flags); } EXPORT_SYMBOL(mcp_set_audio_divisor); @@ -198,10 +167,11 @@ EXPORT_SYMBOL(mcp_reg_read); */ void mcp_enable(struct mcp *mcp) { - spin_lock_irq(&mcp->lock); + unsigned long flags; + spin_lock_irqsave(&mcp->lock, flags); if (mcp->use_count++ == 0) mcp->ops->enable(mcp); - spin_unlock_irq(&mcp->lock); + spin_unlock_irqrestore(&mcp->lock, flags); } EXPORT_SYMBOL(mcp_enable); @@ -247,14 +217,9 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size) } EXPORT_SYMBOL(mcp_host_alloc); -int mcp_host_register(struct mcp *mcp, void *pdata) +int mcp_host_register(struct mcp *mcp) { - if (!mcp->codec) - return -EINVAL; - - mcp->attached_device.platform_data = pdata; dev_set_name(&mcp->attached_device, "mcp0"); - request_module("%s%s", MCP_MODULE_PREFIX, mcp->codec); return device_register(&mcp->attached_device); } EXPORT_SYMBOL(mcp_host_register); diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 9adc2eb..02c53a0 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -19,7 +19,6 @@ #include <linux/spinlock.h> #include <linux/platform_device.h> #include <linux/mfd/mcp.h> -#include <linux/io.h> #include <mach/dma.h> #include <mach/hardware.h> @@ -27,19 +26,12 @@ #include <asm/system.h> #include <mach/mcp.h> -/* Register offsets */ -#define MCCR0 0x00 -#define MCDR0 0x08 -#define MCDR1 0x0C -#define MCDR2 0x10 -#define MCSR 0x18 -#define MCCR1 0x00 +#include <mach/assabet.h> + struct mcp_sa11x0 { - u32 mccr0; - u32 mccr1; - unsigned char *mccr0_base; - unsigned char *mccr1_base; + u32 mccr0; + u32 mccr1; }; #define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp)) @@ -47,25 +39,25 @@ struct mcp_sa11x0 { static void mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor) { - struct mcp_sa11x0 *priv = priv(mcp); + unsigned int mccr0; divisor /= 32; - priv->mccr0 &= ~0x00007f00; - priv->mccr0 |= divisor << 8; - __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0); + mccr0 = Ser4MCCR0 & ~0x00007f00; + mccr0 |= divisor << 8; + Ser4MCCR0 = mccr0; } static void mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor) { - struct mcp_sa11x0 *priv = priv(mcp); + unsigned int mccr0; divisor /= 32; - priv->mccr0 &= ~0x0000007f; - priv->mccr0 |= divisor; - __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0); + mccr0 = Ser4MCCR0 & ~0x0000007f; + mccr0 |= divisor; + Ser4MCCR0 = mccr0; } /* @@ -79,16 +71,12 @@ mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val) { int ret = -ETIME; int i; - u32 mcpreg; - struct mcp_sa11x0 *priv = priv(mcp); - mcpreg = reg << 17 | MCDR2_Wr | (val & 0xffff); - __raw_writel(mcpreg, priv->mccr0_base + MCDR2); + Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff); for (i = 0; i < 2; i++) { udelay(mcp->rw_timeout); - mcpreg = __raw_readl(priv->mccr0_base + MCSR); - if (mcpreg & MCSR_CWC) { + if (Ser4MCSR & MCSR_CWC) { ret = 0; break; } @@ -109,18 +97,13 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg) { int ret = -ETIME; int i; - u32 mcpreg; - struct mcp_sa11x0 *priv = priv(mcp); - mcpreg = reg << 17 | MCDR2_Rd; - __raw_writel(mcpreg, priv->mccr0_base + MCDR2); + Ser4MCDR2 = reg << 17 | MCDR2_Rd; for (i = 0; i < 2; i++) { udelay(mcp->rw_timeout); - mcpreg = __raw_readl(priv->mccr0_base + MCSR); - if (mcpreg & MCSR_CRC) { - ret = __raw_readl(priv->mccr0_base + MCDR2) - & 0xffff; + if (Ser4MCSR & MCSR_CRC) { + ret = Ser4MCDR2 & 0xffff; break; } } @@ -133,19 +116,13 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg) static void mcp_sa11x0_enable(struct mcp *mcp) { - struct mcp_sa11x0 *priv = priv(mcp); - - __raw_writel(-1, priv->mccr0_base + MCSR); - priv->mccr0 |= MCCR0_MCE; - __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0); + Ser4MCSR = -1; + Ser4MCCR0 |= MCCR0_MCE; } static void mcp_sa11x0_disable(struct mcp *mcp) { - struct mcp_sa11x0 *priv = priv(mcp); - - priv->mccr0 &= ~MCCR0_MCE; - __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0); + Ser4MCCR0 &= ~MCCR0_MCE; } /* @@ -165,69 +142,50 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) struct mcp_plat_data *data = pdev->dev.platform_data; struct mcp *mcp; int ret; - struct mcp_sa11x0 *priv; - struct resource *res_mem0, *res_mem1; - u32 size0, size1; if (!data) return -ENODEV; - if (!data->codec) - return -ENODEV; - - res_mem0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res_mem0) - return -ENODEV; - size0 = res_mem0->end - res_mem0->start + 1; - - res_mem1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res_mem1) - return -ENODEV; - size1 = res_mem1->end - res_mem1->start + 1; - - if (!request_mem_region(res_mem0->start, size0, "sa11x0-mcp")) + if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp")) return -EBUSY; - if (!request_mem_region(res_mem1->start, size1, "sa11x0-mcp")) { - ret = -EBUSY; - goto release; - } - mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0)); if (!mcp) { ret = -ENOMEM; - goto release2; + goto release; } - priv = priv(mcp); - mcp->owner = THIS_MODULE; mcp->ops = &mcp_sa11x0; mcp->sclk_rate = data->sclk_rate; - mcp->dma_audio_rd = DDAR_DevAdd(res_mem0->start + MCDR0) - + DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev; - mcp->dma_audio_wr = DDAR_DevAdd(res_mem0->start + MCDR0) - + DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev; - mcp->dma_telco_rd = DDAR_DevAdd(res_mem0->start + MCDR1) - + DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev; - mcp->dma_telco_wr = DDAR_DevAdd(res_mem0->start + MCDR1) - + DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev; - mcp->codec = data->codec; + mcp->dma_audio_rd = DMA_Ser4MCP0Rd; + mcp->dma_audio_wr = DMA_Ser4MCP0Wr; + mcp->dma_telco_rd = DMA_Ser4MCP1Rd; + mcp->dma_telco_wr = DMA_Ser4MCP1Wr; + mcp->gpio_base = data->gpio_base; platform_set_drvdata(pdev, mcp); + if (machine_is_assabet()) { + ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); + } + + /* + * Setup the PPC unit correctly. + */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + /* * Initialise device. Note that we initially * set the sampling rate to minimum. */ - priv->mccr0_base = ioremap(res_mem0->start, size0); - priv->mccr1_base = ioremap(res_mem1->start, size1); - - __raw_writel(-1, priv->mccr0_base + MCSR); - priv->mccr1 = data->mccr1; - priv->mccr0 = data->mccr0 | 0x7f7f; - __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0); - __raw_writel(priv->mccr1, priv->mccr1_base + MCCR1); + Ser4MCSR = -1; + Ser4MCCR1 = data->mccr1; + Ser4MCCR0 = data->mccr0 | 0x7f7f; /* * Calculate the read/write timeout (us) from the bit clock @@ -237,53 +195,36 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) / mcp->sclk_rate; - ret = mcp_host_register(mcp, data->codec_pdata); + ret = mcp_host_register(mcp); if (ret == 0) goto out; - release2: - release_mem_region(res_mem1->start, size1); release: - release_mem_region(res_mem0->start, size0); + release_mem_region(0x80060000, 0x60); platform_set_drvdata(pdev, NULL); out: return ret; } -static int mcp_sa11x0_remove(struct platform_device *pdev) +static int mcp_sa11x0_remove(struct platform_device *dev) { - struct mcp *mcp = platform_get_drvdata(pdev); - struct mcp_sa11x0 *priv = priv(mcp); - struct resource *res_mem; - u32 size; + struct mcp *mcp = platform_get_drvdata(dev); - platform_set_drvdata(pdev, NULL); + platform_set_drvdata(dev, NULL); mcp_host_unregister(mcp); + release_mem_region(0x80060000, 0x60); - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res_mem) { - size = res_mem->end - res_mem->start + 1; - release_mem_region(res_mem->start, size); - } - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (res_mem) { - size = res_mem->end - res_mem->start + 1; - release_mem_region(res_mem->start, size); - } - iounmap(priv->mccr0_base); - iounmap(priv->mccr1_base); return 0; } static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state) { struct mcp *mcp = platform_get_drvdata(dev); - struct mcp_sa11x0 *priv = priv(mcp); - u32 mccr0; - mccr0 = priv->mccr0 & ~MCCR0_MCE; - __raw_writel(mccr0, priv->mccr0_base + MCCR0); + priv(mcp)->mccr0 = Ser4MCCR0; + priv(mcp)->mccr1 = Ser4MCCR1; + Ser4MCCR0 &= ~MCCR0_MCE; return 0; } @@ -291,10 +232,9 @@ static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state) static int mcp_sa11x0_resume(struct platform_device *dev) { struct mcp *mcp = platform_get_drvdata(dev); - struct mcp_sa11x0 *priv = priv(mcp); - __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0); - __raw_writel(priv->mccr1, priv->mccr1_base + MCCR1); + Ser4MCCR1 = priv(mcp)->mccr1; + Ser4MCCR0 = priv(mcp)->mccr0; return 0; } @@ -311,7 +251,6 @@ static struct platform_driver mcp_sa11x0_driver = { .resume = mcp_sa11x0_resume, .driver = { .name = "sa11x0-mcp", - .owner = THIS_MODULE, }, }; diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index 91c4f25..febc90c 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -36,15 +36,6 @@ static DEFINE_MUTEX(ucb1x00_mutex); static LIST_HEAD(ucb1x00_drivers); static LIST_HEAD(ucb1x00_devices); -static struct mcp_device_id ucb1x00_id[] = { - { "ucb1x00", 0 }, /* auto-detection */ - { "ucb1200", UCB_ID_1200 }, - { "ucb1300", UCB_ID_1300 }, - { "tc35143", UCB_ID_TC35143 }, - { } -}; -MODULE_DEVICE_TABLE(mcp, ucb1x00_id); - /** * ucb1x00_io_set_dir - set IO direction * @ucb: UCB1x00 structure describing chip @@ -157,16 +148,22 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset { struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); unsigned long flags; + unsigned old, mask = 1 << offset; spin_lock_irqsave(&ucb->io_lock, flags); - ucb->io_dir |= (1 << offset); - ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); - + old = ucb->io_out; if (value) - ucb->io_out |= 1 << offset; + ucb->io_out |= mask; else - ucb->io_out &= ~(1 << offset); - ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); + ucb->io_out &= ~mask; + + if (old != ucb->io_out) + ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); + + if (!(ucb->io_dir & mask)) { + ucb->io_dir |= mask; + ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); + } spin_unlock_irqrestore(&ucb->io_lock, flags); return 0; @@ -536,33 +533,17 @@ static struct class ucb1x00_class = { static int ucb1x00_probe(struct mcp *mcp) { - const struct mcp_device_id *mid; struct ucb1x00 *ucb; struct ucb1x00_driver *drv; - struct ucb1x00_plat_data *pdata; unsigned int id; int ret = -ENODEV; int temp; mcp_enable(mcp); id = mcp_reg_read(mcp, UCB_ID); - mid = mcp_get_device_id(mcp); - if (mid && mid->driver_data) { - if (id != mid->driver_data) { - printk(KERN_WARNING "%s wrong ID %04x found: %04x\n", - mid->name, (unsigned int) mid->driver_data, id); - goto err_disable; - } - } else { - mid = &ucb1x00_id[1]; - while (mid->driver_data) { - if (id == mid->driver_data) - break; - mid++; - } - printk(KERN_WARNING "%s ID not found: %04x\n", - ucb1x00_id[0].name, id); + if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) { + printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id); goto err_disable; } @@ -571,28 +552,28 @@ static int ucb1x00_probe(struct mcp *mcp) if (!ucb) goto err_disable; - pdata = mcp->attached_device.platform_data; + ucb->dev.class = &ucb1x00_class; ucb->dev.parent = &mcp->attached_device; - dev_set_name(&ucb->dev, mid->name); + dev_set_name(&ucb->dev, "ucb1x00"); spin_lock_init(&ucb->lock); spin_lock_init(&ucb->io_lock); sema_init(&ucb->adc_sem, 1); - ucb->id = mid; + ucb->id = id; ucb->mcp = mcp; ucb->irq = ucb1x00_detect_irq(ucb); if (ucb->irq == NO_IRQ) { - printk(KERN_ERR "%s: IRQ probe failed\n", mid->name); + printk(KERN_ERR "UCB1x00: IRQ probe failed\n"); ret = -ENODEV; goto err_free; } ucb->gpio.base = -1; - if (pdata && (pdata->gpio_base >= 0)) { + if (mcp->gpio_base != 0) { ucb->gpio.label = dev_name(&ucb->dev); - ucb->gpio.base = pdata->gpio_base; + ucb->gpio.base = mcp->gpio_base; ucb->gpio.ngpio = 10; ucb->gpio.set = ucb1x00_gpio_set; ucb->gpio.get = ucb1x00_gpio_get; @@ -605,10 +586,10 @@ static int ucb1x00_probe(struct mcp *mcp) dev_info(&ucb->dev, "gpio_base not set so no gpiolib support"); ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING, - mid->name, ucb); + "UCB1x00", ucb); if (ret) { - printk(KERN_ERR "%s: unable to grab irq%d: %d\n", - mid->name, ucb->irq, ret); + printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n", + ucb->irq, ret); goto err_gpio; } @@ -712,6 +693,7 @@ static int ucb1x00_resume(struct mcp *mcp) struct ucb1x00 *ucb = mcp_get_drvdata(mcp); struct ucb1x00_dev *dev; + ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); mutex_lock(&ucb1x00_mutex); list_for_each_entry(dev, &ucb->devs, dev_node) { @@ -730,7 +712,6 @@ static struct mcp_driver ucb1x00_driver = { .remove = ucb1x00_remove, .suspend = ucb1x00_suspend, .resume = ucb1x00_resume, - .id_table = ucb1x00_id, }; static int __init ucb1x00_init(void) diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index 40ec3c1..63a3cbd 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -47,7 +47,6 @@ struct ucb1x00_ts { u16 x_res; u16 y_res; - unsigned int restart:1; unsigned int adcsync:1; }; @@ -207,15 +206,17 @@ static int ucb1x00_thread(void *_ts) { struct ucb1x00_ts *ts = _ts; DECLARE_WAITQUEUE(wait, current); + bool frozen, ignore = false; int valid = 0; set_freezable(); add_wait_queue(&ts->irq_wait, &wait); - while (!kthread_should_stop()) { + while (!kthread_freezable_should_stop(&frozen)) { unsigned int x, y, p; signed long timeout; - ts->restart = 0; + if (frozen) + ignore = true; ucb1x00_adc_enable(ts->ucb); @@ -258,7 +259,7 @@ static int ucb1x00_thread(void *_ts) * space. We therefore leave it to user space * to do any filtering they please. */ - if (!ts->restart) { + if (!ignore) { ucb1x00_ts_evt_add(ts, p, x, y); valid = 1; } @@ -267,8 +268,6 @@ static int ucb1x00_thread(void *_ts) timeout = HZ / 100; } - try_to_freeze(); - schedule_timeout(timeout); } @@ -340,26 +339,6 @@ static void ucb1x00_ts_close(struct input_dev *idev) ucb1x00_disable(ts->ucb); } -#ifdef CONFIG_PM -static int ucb1x00_ts_resume(struct ucb1x00_dev *dev) -{ - struct ucb1x00_ts *ts = dev->priv; - - if (ts->rtask != NULL) { - /* - * Restart the TS thread to ensure the - * TS interrupt mode is set up again - * after sleep. - */ - ts->restart = 1; - wake_up(&ts->irq_wait); - } - return 0; -} -#else -#define ucb1x00_ts_resume NULL -#endif - /* * Initialisation. @@ -382,7 +361,7 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev) ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC; idev->name = "Touchscreen panel"; - idev->id.product = ts->ucb->id->driver_data; + idev->id.product = ts->ucb->id; idev->open = ucb1x00_ts_open; idev->close = ucb1x00_ts_close; @@ -425,7 +404,6 @@ static void ucb1x00_ts_remove(struct ucb1x00_dev *dev) static struct ucb1x00_driver ucb1x00_ts_driver = { .add = ucb1x00_ts_add, .remove = ucb1x00_ts_remove, - .resume = ucb1x00_ts_resume, }; static int __init ucb1x00_ts_init(void) diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c index 752493f..65d1f05 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c @@ -972,11 +972,11 @@ void iwl_irq_tasklet(struct iwl_trans *trans) } #endif - spin_unlock_irqrestore(&trans->shrd->lock, flags); - /* saved interrupt in inta variable now we can reset trans_pcie->inta */ trans_pcie->inta = 0; + spin_unlock_irqrestore(&trans->shrd->lock, flags); + /* Now service all interrupt bits discovered above. */ if (inta & CSR_INT_BIT_HW_ERR) { IWL_ERR(trans, "Hardware error detected. Restarting.\n"); diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index fa67905..698b905 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -68,7 +68,7 @@ struct netfront_cb { #define NET_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE) #define NET_RX_RING_SIZE __CONST_RING_SIZE(xen_netif_rx, PAGE_SIZE) -#define TX_MAX_TARGET min_t(int, NET_RX_RING_SIZE, 256) +#define TX_MAX_TARGET min_t(int, NET_TX_RING_SIZE, 256) struct netfront_stats { u64 rx_packets; diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c index 5986690..27f2fe3 100644 --- a/drivers/pcmcia/sa1111_generic.c +++ b/drivers/pcmcia/sa1111_generic.c @@ -205,7 +205,8 @@ static int __devexit pcmcia_remove(struct sa1111_dev *dev) dev_set_drvdata(&dev->dev, NULL); - for (; next = s->next, s; s = next) { + for (; s; s = next) { + next = s->next; soc_pcmcia_remove_one(&s->soc); kfree(s); } diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 569bdb3..8fe15cf 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -510,10 +510,12 @@ static struct dentry *debugfs_root; static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev) { - static struct dentry *device_root; + struct dentry *device_root; device_root = debugfs_create_dir(dev_name(pctldev->dev), debugfs_root); + pctldev->device_root = device_root; + if (IS_ERR(device_root) || !device_root) { pr_warn("failed to create debugfs directory for %s\n", dev_name(pctldev->dev)); @@ -529,6 +531,11 @@ static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev) pinconf_init_device_debugfs(device_root, pctldev); } +static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev) +{ + debugfs_remove_recursive(pctldev->device_root); +} + static void pinctrl_init_debugfs(void) { debugfs_root = debugfs_create_dir("pinctrl", NULL); @@ -553,6 +560,10 @@ static void pinctrl_init_debugfs(void) { } +static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev) +{ +} + #endif /** @@ -572,40 +583,40 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc, if (pctldesc->name == NULL) return NULL; + pctldev = kzalloc(sizeof(struct pinctrl_dev), GFP_KERNEL); + if (pctldev == NULL) + return NULL; + + /* Initialize pin control device struct */ + pctldev->owner = pctldesc->owner; + pctldev->desc = pctldesc; + pctldev->driver_data = driver_data; + INIT_RADIX_TREE(&pctldev->pin_desc_tree, GFP_KERNEL); + spin_lock_init(&pctldev->pin_desc_tree_lock); + INIT_LIST_HEAD(&pctldev->gpio_ranges); + mutex_init(&pctldev->gpio_ranges_lock); + pctldev->dev = dev; + /* If we're implementing pinmuxing, check the ops for sanity */ if (pctldesc->pmxops) { - ret = pinmux_check_ops(pctldesc->pmxops); + ret = pinmux_check_ops(pctldev); if (ret) { pr_err("%s pinmux ops lacks necessary functions\n", pctldesc->name); - return NULL; + goto out_err; } } /* If we're implementing pinconfig, check the ops for sanity */ if (pctldesc->confops) { - ret = pinconf_check_ops(pctldesc->confops); + ret = pinconf_check_ops(pctldev); if (ret) { pr_err("%s pin config ops lacks necessary functions\n", pctldesc->name); - return NULL; + goto out_err; } } - pctldev = kzalloc(sizeof(struct pinctrl_dev), GFP_KERNEL); - if (pctldev == NULL) - return NULL; - - /* Initialize pin control device struct */ - pctldev->owner = pctldesc->owner; - pctldev->desc = pctldesc; - pctldev->driver_data = driver_data; - INIT_RADIX_TREE(&pctldev->pin_desc_tree, GFP_KERNEL); - spin_lock_init(&pctldev->pin_desc_tree_lock); - INIT_LIST_HEAD(&pctldev->gpio_ranges); - mutex_init(&pctldev->gpio_ranges_lock); - pctldev->dev = dev; - /* Register all the pins */ pr_debug("try to register %d pins on %s...\n", pctldesc->npins, pctldesc->name); @@ -641,6 +652,7 @@ void pinctrl_unregister(struct pinctrl_dev *pctldev) if (pctldev == NULL) return; + pinctrl_remove_device_debugfs(pctldev); pinmux_unhog_maps(pctldev); /* TODO: check that no pinmuxes are still active? */ mutex_lock(&pinctrldev_list_mutex); diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h index 177a331..cfa86da 100644 --- a/drivers/pinctrl/core.h +++ b/drivers/pinctrl/core.h @@ -41,6 +41,9 @@ struct pinctrl_dev { struct device *dev; struct module *owner; void *driver_data; +#ifdef CONFIG_DEBUG_FS + struct dentry *device_root; +#endif #ifdef CONFIG_PINMUX struct mutex pinmux_hogs_lock; struct list_head pinmux_hogs; diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index 1259872..9fb7545 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -205,8 +205,10 @@ int pin_config_group_set(const char *dev_name, const char *pin_group, } EXPORT_SYMBOL(pin_config_group_set); -int pinconf_check_ops(const struct pinconf_ops *ops) +int pinconf_check_ops(struct pinctrl_dev *pctldev) { + const struct pinconf_ops *ops = pctldev->desc->confops; + /* We must be able to read out pin status */ if (!ops->pin_config_get && !ops->pin_config_group_get) return -EINVAL; @@ -236,7 +238,7 @@ static int pinconf_pins_show(struct seq_file *s, void *what) seq_puts(s, "Format: pin (name): pinmux setting array\n"); /* The pin number can be retrived from the pin controller descriptor */ - for (i = 0; pin < pctldev->desc->npins; i++) { + for (i = 0; i < pctldev->desc->npins; i++) { struct pin_desc *desc; pin = pctldev->desc->pins[i].number; diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h index e7dc616..006b77f 100644 --- a/drivers/pinctrl/pinconf.h +++ b/drivers/pinctrl/pinconf.h @@ -13,7 +13,7 @@ #ifdef CONFIG_PINCONF -int pinconf_check_ops(const struct pinconf_ops *ops); +int pinconf_check_ops(struct pinctrl_dev *pctldev); void pinconf_init_device_debugfs(struct dentry *devroot, struct pinctrl_dev *pctldev); int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin, @@ -23,7 +23,7 @@ int pin_config_set_for_pin(struct pinctrl_dev *pctldev, unsigned pin, #else -static inline int pinconf_check_ops(const struct pinconf_ops *ops) +static inline int pinconf_check_ops(struct pinctrl_dev *pctldev) { return 0; } diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index a76a348..7c3193f 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -53,11 +53,6 @@ struct pinmux_group { * @dev: the device using this pinmux * @usecount: the number of active users of this mux setting, used to keep * track of nested use cases - * @pins: an array of discrete physical pins used in this mapping, taken - * from the global pin enumeration space (copied from pinmux map) - * @num_pins: the number of pins in this mapping array, i.e. the number of - * elements in .pins so we can iterate over that array (copied from - * pinmux map) * @pctldev: pin control device handling this pinmux * @func_selector: the function selector for the pinmux device handling * this pinmux @@ -152,8 +147,7 @@ static int pin_request(struct pinctrl_dev *pctldev, status = 0; if (status) - dev_err(pctldev->dev, "->request on device %s failed " - "for pin %d\n", + dev_err(pctldev->dev, "->request on device %s failed for pin %d\n", pctldev->desc->name, pin); out_free_pin: if (status) { @@ -355,21 +349,20 @@ int __init pinmux_register_mappings(struct pinmux_map const *maps, /* First sanity check the new mapping */ for (i = 0; i < num_maps; i++) { if (!maps[i].name) { - pr_err("failed to register map %d: " - "no map name given\n", i); + pr_err("failed to register map %d: no map name given\n", + i); return -EINVAL; } if (!maps[i].ctrl_dev && !maps[i].ctrl_dev_name) { - pr_err("failed to register map %s (%d): " - "no pin control device given\n", + pr_err("failed to register map %s (%d): no pin control device given\n", maps[i].name, i); return -EINVAL; } if (!maps[i].function) { - pr_err("failed to register map %s (%d): " - "no function ID given\n", maps[i].name, i); + pr_err("failed to register map %s (%d): no function ID given\n", + maps[i].name, i); return -EINVAL; } @@ -411,7 +404,7 @@ int __init pinmux_register_mappings(struct pinmux_map const *maps, } /** - * acquire_pins() - acquire all the pins for a certain funcion on a pinmux + * acquire_pins() - acquire all the pins for a certain function on a pinmux * @pctldev: the device to take the pins on * @func_selector: the function selector to acquire the pins for * @group_selector: the group selector containing the pins to acquire @@ -442,8 +435,7 @@ static int acquire_pins(struct pinctrl_dev *pctldev, ret = pin_request(pctldev, pins[i], func, NULL); if (ret) { dev_err(pctldev->dev, - "could not get pin %d for function %s " - "on device %s - conflicting mux mappings?\n", + "could not get pin %d for function %s on device %s - conflicting mux mappings?\n", pins[i], func ? : "(undefined)", pinctrl_dev_get_name(pctldev)); /* On error release all taken pins */ @@ -458,7 +450,7 @@ static int acquire_pins(struct pinctrl_dev *pctldev, /** * release_pins() - release pins taken by earlier acquirement - * @pctldev: the device to free the pinx on + * @pctldev: the device to free the pins on * @group_selector: the group selector containing the pins to free */ static void release_pins(struct pinctrl_dev *pctldev, @@ -473,8 +465,7 @@ static void release_pins(struct pinctrl_dev *pctldev, ret = pctlops->get_group_pins(pctldev, group_selector, &pins, &num_pins); if (ret) { - dev_err(pctldev->dev, "could not get pins to release for " - "group selector %d\n", + dev_err(pctldev->dev, "could not get pins to release for group selector %d\n", group_selector); return; } @@ -526,8 +517,7 @@ static int pinmux_check_pin_group(struct pinctrl_dev *pctldev, ret = pinctrl_get_group_selector(pctldev, groups[0]); if (ret < 0) { dev_err(pctldev->dev, - "function %s wants group %s but the pin " - "controller does not seem to have that group\n", + "function %s wants group %s but the pin controller does not seem to have that group\n", pmxops->get_function_name(pctldev, func_selector), groups[0]); return ret; @@ -535,8 +525,7 @@ static int pinmux_check_pin_group(struct pinctrl_dev *pctldev, if (num_groups > 1) dev_dbg(pctldev->dev, - "function %s support more than one group, " - "default-selecting first group %s (%d)\n", + "function %s support more than one group, default-selecting first group %s (%d)\n", pmxops->get_function_name(pctldev, func_selector), groups[0], ret); @@ -628,10 +617,8 @@ static int pinmux_enable_muxmap(struct pinctrl_dev *pctldev, if (pmx->pctldev && pmx->pctldev != pctldev) { dev_err(pctldev->dev, - "different pin control devices given for device %s, " - "function %s\n", - devname, - map->function); + "different pin control devices given for device %s, function %s\n", + devname, map->function); return -EINVAL; } pmx->dev = dev; @@ -695,7 +682,6 @@ static void pinmux_free_groups(struct pinmux *pmx) */ struct pinmux *pinmux_get(struct device *dev, const char *name) { - struct pinmux_map const *map = NULL; struct pinctrl_dev *pctldev = NULL; const char *devname = NULL; @@ -745,8 +731,7 @@ struct pinmux *pinmux_get(struct device *dev, const char *name) else if (map->ctrl_dev_name) devname = map->ctrl_dev_name; - pr_warning("could not find a pinctrl device for pinmux " - "function %s, fishy, they shall all have one\n", + pr_warning("could not find a pinctrl device for pinmux function %s, fishy, they shall all have one\n", map->function); pr_warning("given pinctrl device name: %s", devname ? devname : "UNDEFINED"); @@ -904,8 +889,11 @@ void pinmux_disable(struct pinmux *pmx) } EXPORT_SYMBOL_GPL(pinmux_disable); -int pinmux_check_ops(const struct pinmux_ops *ops) +int pinmux_check_ops(struct pinctrl_dev *pctldev) { + const struct pinmux_ops *ops = pctldev->desc->pmxops; + unsigned selector = 0; + /* Check that we implement required operations */ if (!ops->list_functions || !ops->get_function_name || @@ -914,6 +902,18 @@ int pinmux_check_ops(const struct pinmux_ops *ops) !ops->disable) return -EINVAL; + /* Check that all functions registered have names */ + while (ops->list_functions(pctldev, selector) >= 0) { + const char *fname = ops->get_function_name(pctldev, + selector); + if (!fname) { + pr_err("pinmux ops has no name for function%u\n", + selector); + return -EINVAL; + } + selector++; + } + return 0; } @@ -932,8 +932,8 @@ static int pinmux_hog_map(struct pinctrl_dev *pctldev, * without any problems, so then we can hog pinmuxes for * all devices that just want a static pin mux at this point. */ - dev_err(pctldev->dev, "map %s wants to hog a non-system " - "pinmux, this is not going to work\n", map->name); + dev_err(pctldev->dev, "map %s wants to hog a non-system pinmux, this is not going to work\n", + map->name); return -EINVAL; } @@ -993,9 +993,12 @@ int pinmux_hog_maps(struct pinctrl_dev *pctldev) for (i = 0; i < pinmux_maps_num; i++) { struct pinmux_map const *map = &pinmux_maps[i]; - if (((map->ctrl_dev == dev) || - !strcmp(map->ctrl_dev_name, devname)) && - map->hog_on_boot) { + if (!map->hog_on_boot) + continue; + + if ((map->ctrl_dev == dev) || + (map->ctrl_dev_name && + !strcmp(map->ctrl_dev_name, devname))) { /* OK time to hog! */ ret = pinmux_hog_map(pctldev, map); if (ret) @@ -1122,13 +1125,15 @@ static int pinmux_show(struct seq_file *s, void *what) seq_printf(s, "device: %s function: %s (%u),", pinctrl_dev_get_name(pmx->pctldev), - pmxops->get_function_name(pctldev, pmx->func_selector), + pmxops->get_function_name(pctldev, + pmx->func_selector), pmx->func_selector); seq_printf(s, " groups: ["); list_for_each_entry(grp, &pmx->groups, node) { seq_printf(s, " %s (%u)", - pctlops->get_group_name(pctldev, grp->group_selector), + pctlops->get_group_name(pctldev, + grp->group_selector), grp->group_selector); } seq_printf(s, " ]"); diff --git a/drivers/pinctrl/pinmux.h b/drivers/pinctrl/pinmux.h index 844500b..97f5222 100644 --- a/drivers/pinctrl/pinmux.h +++ b/drivers/pinctrl/pinmux.h @@ -12,7 +12,7 @@ */ #ifdef CONFIG_PINMUX -int pinmux_check_ops(const struct pinmux_ops *ops); +int pinmux_check_ops(struct pinctrl_dev *pctldev); void pinmux_init_device_debugfs(struct dentry *devroot, struct pinctrl_dev *pctldev); void pinmux_init_debugfs(struct dentry *subsys_root); @@ -21,7 +21,7 @@ void pinmux_unhog_maps(struct pinctrl_dev *pctldev); #else -static inline int pinmux_check_ops(const struct pinmux_ops *ops) +static inline int pinmux_check_ops(struct pinctrl_dev *pctldev) { return 0; } diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index f1651eb..679734d 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -35,7 +35,7 @@ static void of_get_regulation_constraints(struct device_node *np, if (constraints->min_uV != constraints->max_uV) constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE; /* Only one voltage? Then make sure it's set. */ - if (constraints->min_uV == constraints->max_uV) + if (min_uV && max_uV && constraints->min_uV == constraints->max_uV) constraints->apply_uV = true; uV_offset = of_get_property(np, "regulator-microvolt-offset", NULL); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index e19a403..3a125b8 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -774,7 +774,7 @@ config RTC_DRV_EP93XX config RTC_DRV_SA1100 tristate "SA11x0/PXA2xx" - depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP + depends on ARCH_SA1100 || ARCH_PXA help If you say Y here you will get access to the real time clock built into your SA11x0 or PXA2xx CPU. diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 4595d3e..cb9a585 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -27,42 +27,34 @@ #include <linux/init.h> #include <linux/fs.h> #include <linux/interrupt.h> +#include <linux/string.h> #include <linux/pm.h> -#include <linux/slab.h> -#include <linux/clk.h> -#include <linux/io.h> +#include <linux/bitops.h> #include <mach/hardware.h> #include <asm/irq.h> +#ifdef CONFIG_ARCH_PXA +#include <mach/regs-rtc.h> +#endif + #define RTC_DEF_DIVIDER (32768 - 1) #define RTC_DEF_TRIM 0 -#define RTC_FREQ 1024 - -#define RCNR 0x00 /* RTC Count Register */ -#define RTAR 0x04 /* RTC Alarm Register */ -#define RTSR 0x08 /* RTC Status Register */ -#define RTTR 0x0c /* RTC Timer Trim Register */ - -#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ -#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ -#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ -#define RTSR_AL (1 << 0) /* RTC alarm detected */ - -#define rtc_readl(sa1100_rtc, reg) \ - readl_relaxed((sa1100_rtc)->base + (reg)) -#define rtc_writel(sa1100_rtc, reg, value) \ - writel_relaxed((value), (sa1100_rtc)->base + (reg)) - -struct sa1100_rtc { - struct resource *ress; - void __iomem *base; - struct clk *clk; - int irq_1Hz; - int irq_Alrm; - struct rtc_device *rtc; - spinlock_t lock; /* Protects this structure */ -}; + +static const unsigned long RTC_FREQ = 1024; +static struct rtc_time rtc_alarm; +static DEFINE_SPINLOCK(sa1100_rtc_lock); + +static inline int rtc_periodic_alarm(struct rtc_time *tm) +{ + return (tm->tm_year == -1) || + ((unsigned)tm->tm_mon >= 12) || + ((unsigned)(tm->tm_mday - 1) >= 31) || + ((unsigned)tm->tm_hour > 23) || + ((unsigned)tm->tm_min > 59) || + ((unsigned)tm->tm_sec > 59); +} + /* * Calculate the next alarm time given the requested alarm time mask * and the current time. @@ -90,26 +82,46 @@ static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, } } +static int rtc_update_alarm(struct rtc_time *alrm) +{ + struct rtc_time alarm_tm, now_tm; + unsigned long now, time; + int ret; + + do { + now = RCNR; + rtc_time_to_tm(now, &now_tm); + rtc_next_alarm_time(&alarm_tm, &now_tm, alrm); + ret = rtc_tm_to_time(&alarm_tm, &time); + if (ret != 0) + break; + + RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL); + RTAR = time; + } while (now != RCNR); + + return ret; +} + static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) { struct platform_device *pdev = to_platform_device(dev_id); - struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev); + struct rtc_device *rtc = platform_get_drvdata(pdev); unsigned int rtsr; unsigned long events = 0; - spin_lock(&sa1100_rtc->lock); + spin_lock(&sa1100_rtc_lock); + rtsr = RTSR; /* clear interrupt sources */ - rtsr = rtc_readl(sa1100_rtc, RTSR); - rtc_writel(sa1100_rtc, RTSR, 0); - + RTSR = 0; /* Fix for a nasty initialization problem the in SA11xx RTSR register. * See also the comments in sa1100_rtc_probe(). */ if (rtsr & (RTSR_ALE | RTSR_HZE)) { /* This is the original code, before there was the if test * above. This code does not clear interrupts that were not * enabled. */ - rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ) & (rtsr >> 2)); + RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2); } else { /* For some reason, it is possible to enter this routine * without interruptions enabled, it has been tested with @@ -118,13 +130,13 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) * This situation leads to an infinite "loop" of interrupt * routine calling and as a result the processor seems to * lock on its first call to open(). */ - rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ)); + RTSR = RTSR_AL | RTSR_HZ; } /* clear alarm interrupt if it has occurred */ if (rtsr & RTSR_AL) rtsr &= ~RTSR_ALE; - rtc_writel(sa1100_rtc, RTSR, rtsr & (RTSR_ALE | RTSR_HZE)); + RTSR = rtsr & (RTSR_ALE | RTSR_HZE); /* update irq data & counter */ if (rtsr & RTSR_AL) @@ -132,100 +144,89 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) if (rtsr & RTSR_HZ) events |= RTC_UF | RTC_IRQF; - rtc_update_irq(sa1100_rtc->rtc, 1, events); + rtc_update_irq(rtc, 1, events); - spin_unlock(&sa1100_rtc->lock); + if (rtsr & RTSR_AL && rtc_periodic_alarm(&rtc_alarm)) + rtc_update_alarm(&rtc_alarm); + + spin_unlock(&sa1100_rtc_lock); return IRQ_HANDLED; } static int sa1100_rtc_open(struct device *dev) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); int ret; + struct platform_device *plat_dev = to_platform_device(dev); + struct rtc_device *rtc = platform_get_drvdata(plat_dev); - ret = request_irq(sa1100_rtc->irq_1Hz, sa1100_rtc_interrupt, - IRQF_DISABLED, "rtc 1Hz", dev); + ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED, + "rtc 1Hz", dev); if (ret) { - dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_1Hz); + dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz); goto fail_ui; } - ret = request_irq(sa1100_rtc->irq_Alrm, sa1100_rtc_interrupt, - IRQF_DISABLED, "rtc Alrm", dev); + ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED, + "rtc Alrm", dev); if (ret) { - dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_Alrm); + dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm); goto fail_ai; } - sa1100_rtc->rtc->max_user_freq = RTC_FREQ; - rtc_irq_set_freq(sa1100_rtc->rtc, NULL, RTC_FREQ); + rtc->max_user_freq = RTC_FREQ; + rtc_irq_set_freq(rtc, NULL, RTC_FREQ); return 0; fail_ai: - free_irq(sa1100_rtc->irq_1Hz, dev); + free_irq(IRQ_RTC1Hz, dev); fail_ui: return ret; } static void sa1100_rtc_release(struct device *dev) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - - spin_lock_irq(&sa1100_rtc->lock); - rtc_writel(sa1100_rtc, RTSR, 0); - spin_unlock_irq(&sa1100_rtc->lock); + spin_lock_irq(&sa1100_rtc_lock); + RTSR = 0; + spin_unlock_irq(&sa1100_rtc_lock); - free_irq(sa1100_rtc->irq_Alrm, dev); - free_irq(sa1100_rtc->irq_1Hz, dev); + free_irq(IRQ_RTCAlrm, dev); + free_irq(IRQ_RTC1Hz, dev); } static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - unsigned int rtsr; - - spin_lock_irq(&sa1100_rtc->lock); - - rtsr = rtc_readl(sa1100_rtc, RTSR); + spin_lock_irq(&sa1100_rtc_lock); if (enabled) - rtsr |= RTSR_ALE; + RTSR |= RTSR_ALE; else - rtsr &= ~RTSR_ALE; - rtc_writel(sa1100_rtc, RTSR, rtsr); - - spin_unlock_irq(&sa1100_rtc->lock); + RTSR &= ~RTSR_ALE; + spin_unlock_irq(&sa1100_rtc_lock); return 0; } static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - - rtc_time_to_tm(rtc_readl(sa1100_rtc, RCNR), tm); + rtc_time_to_tm(RCNR, tm); return 0; } static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); unsigned long time; int ret; ret = rtc_tm_to_time(tm, &time); if (ret == 0) - rtc_writel(sa1100_rtc, RCNR, time); + RCNR = time; return ret; } static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - unsigned long time; - unsigned int rtsr; + u32 rtsr; - time = rtc_readl(sa1100_rtc, RCNR); - rtc_time_to_tm(time, &alrm->time); - rtsr = rtc_readl(sa1100_rtc, RTSR); + memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time)); + rtsr = RTSR; alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0; alrm->pending = (rtsr & RTSR_AL) ? 1 : 0; return 0; @@ -233,39 +234,26 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - struct rtc_time now_tm, alarm_tm; - unsigned long time, alarm; - unsigned int rtsr; - - spin_lock_irq(&sa1100_rtc->lock); - - time = rtc_readl(sa1100_rtc, RCNR); - rtc_time_to_tm(time, &now_tm); - rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time); - rtc_tm_to_time(&alarm_tm, &alarm); - rtc_writel(sa1100_rtc, RTAR, alarm); - - rtsr = rtc_readl(sa1100_rtc, RTSR); - if (alrm->enabled) - rtsr |= RTSR_ALE; - else - rtsr &= ~RTSR_ALE; - rtc_writel(sa1100_rtc, RTSR, rtsr); + int ret; - spin_unlock_irq(&sa1100_rtc->lock); + spin_lock_irq(&sa1100_rtc_lock); + ret = rtc_update_alarm(&alrm->time); + if (ret == 0) { + if (alrm->enabled) + RTSR |= RTSR_ALE; + else + RTSR &= ~RTSR_ALE; + } + spin_unlock_irq(&sa1100_rtc_lock); - return 0; + return ret; } static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); + seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR); + seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR); - seq_printf(seq, "trim/divider\t\t: 0x%08x\n", - rtc_readl(sa1100_rtc, RTTR)); - seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", - rtc_readl(sa1100_rtc, RTSR)); return 0; } @@ -282,51 +270,7 @@ static const struct rtc_class_ops sa1100_rtc_ops = { static int sa1100_rtc_probe(struct platform_device *pdev) { - struct sa1100_rtc *sa1100_rtc; - unsigned int rttr; - int ret; - - sa1100_rtc = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL); - if (!sa1100_rtc) - return -ENOMEM; - - spin_lock_init(&sa1100_rtc->lock); - platform_set_drvdata(pdev, sa1100_rtc); - - ret = -ENXIO; - sa1100_rtc->ress = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!sa1100_rtc->ress) { - dev_err(&pdev->dev, "No I/O memory resource defined\n"); - goto err_ress; - } - - sa1100_rtc->irq_1Hz = platform_get_irq(pdev, 0); - if (sa1100_rtc->irq_1Hz < 0) { - dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n"); - goto err_ress; - } - sa1100_rtc->irq_Alrm = platform_get_irq(pdev, 1); - if (sa1100_rtc->irq_Alrm < 0) { - dev_err(&pdev->dev, "No alarm IRQ resource defined\n"); - goto err_ress; - } - - ret = -ENOMEM; - sa1100_rtc->base = ioremap(sa1100_rtc->ress->start, - resource_size(sa1100_rtc->ress)); - if (!sa1100_rtc->base) { - dev_err(&pdev->dev, "Unable to map pxa RTC I/O memory\n"); - goto err_map; - } - - sa1100_rtc->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(sa1100_rtc->clk)) { - dev_err(&pdev->dev, "failed to find rtc clock source\n"); - ret = PTR_ERR(sa1100_rtc->clk); - goto err_clk; - } - clk_prepare(sa1100_rtc->clk); - clk_enable(sa1100_rtc->clk); + struct rtc_device *rtc; /* * According to the manual we should be able to let RTTR be zero @@ -335,24 +279,24 @@ static int sa1100_rtc_probe(struct platform_device *pdev) * If the clock divider is uninitialized then reset it to the * default value to get the 1Hz clock. */ - if (rtc_readl(sa1100_rtc, RTTR) == 0) { - rttr = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16); - rtc_writel(sa1100_rtc, RTTR, rttr); - dev_warn(&pdev->dev, "warning: initializing default clock" - " divider/trim value\n"); + if (RTTR == 0) { + RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16); + dev_warn(&pdev->dev, "warning: " + "initializing default clock divider/trim value\n"); /* The current RTC value probably doesn't make sense either */ - rtc_writel(sa1100_rtc, RCNR, 0); + RCNR = 0; } device_init_wakeup(&pdev->dev, 1); - sa1100_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, - &sa1100_rtc_ops, THIS_MODULE); - if (IS_ERR(sa1100_rtc->rtc)) { - dev_err(&pdev->dev, "Failed to register RTC device -> %d\n", - ret); - goto err_rtc_reg; - } + rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops, + THIS_MODULE); + + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + platform_set_drvdata(pdev, rtc); + /* Fix for a nasty initialization problem the in SA11xx RTSR register. * See also the comments in sa1100_rtc_interrupt(). * @@ -375,46 +319,33 @@ static int sa1100_rtc_probe(struct platform_device *pdev) * * Notice that clearing bit 1 and 0 is accomplished by writting ONES to * the corresponding bits in RTSR. */ - rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ)); + RTSR = RTSR_AL | RTSR_HZ; return 0; - -err_rtc_reg: -err_clk: - iounmap(sa1100_rtc->base); -err_ress: -err_map: - kfree(sa1100_rtc); - return ret; } static int sa1100_rtc_remove(struct platform_device *pdev) { - struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev); + struct rtc_device *rtc = platform_get_drvdata(pdev); + + if (rtc) + rtc_device_unregister(rtc); - rtc_device_unregister(sa1100_rtc->rtc); - clk_disable(sa1100_rtc->clk); - clk_unprepare(sa1100_rtc->clk); - iounmap(sa1100_rtc->base); return 0; } #ifdef CONFIG_PM static int sa1100_rtc_suspend(struct device *dev) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) - enable_irq_wake(sa1100_rtc->irq_Alrm); + enable_irq_wake(IRQ_RTCAlrm); return 0; } static int sa1100_rtc_resume(struct device *dev) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) - disable_irq_wake(sa1100_rtc->irq_Alrm); + disable_irq_wake(IRQ_RTCAlrm); return 0; } diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index eef27a1..110137e 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -3261,6 +3261,12 @@ void dasd_generic_path_event(struct ccw_device *cdev, int *path_event) device->path_data.tbvpm |= eventlpm; dasd_schedule_device_bh(device); } + if (path_event[chp] & PE_PATHGROUP_ESTABLISHED) { + DBF_DEV_EVENT(DBF_WARNING, device, "%s", + "Pathgroup re-established\n"); + if (device->discipline->kick_validate) + device->discipline->kick_validate(device); + } } dasd_put_device(device); } diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index 553b3c5..b3beed5 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -189,14 +189,12 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device) unsigned long flags; struct alias_server *server, *newserver; struct alias_lcu *lcu, *newlcu; - int is_lcu_known; struct dasd_uid uid; private = (struct dasd_eckd_private *) device->private; device->discipline->get_uid(device, &uid); spin_lock_irqsave(&aliastree.lock, flags); - is_lcu_known = 1; server = _find_server(&uid); if (!server) { spin_unlock_irqrestore(&aliastree.lock, flags); @@ -208,7 +206,6 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device) if (!server) { list_add(&newserver->server, &aliastree.serverlist); server = newserver; - is_lcu_known = 0; } else { /* someone was faster */ _free_server(newserver); @@ -226,12 +223,10 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device) if (!lcu) { list_add(&newlcu->lcu, &server->lculist); lcu = newlcu; - is_lcu_known = 0; } else { /* someone was faster */ _free_lcu(newlcu); } - is_lcu_known = 0; } spin_lock(&lcu->lock); list_add(&device->alias_list, &lcu->inactive_devices); @@ -239,64 +234,7 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device) spin_unlock(&lcu->lock); spin_unlock_irqrestore(&aliastree.lock, flags); - return is_lcu_known; -} - -/* - * The first device to be registered on an LCU will have to do - * some additional setup steps to configure that LCU on the - * storage server. All further devices should wait with their - * initialization until the first device is done. - * To synchronize this work, the first device will call - * dasd_alias_lcu_setup_complete when it is done, and all - * other devices will wait for it with dasd_alias_wait_for_lcu_setup. - */ -void dasd_alias_lcu_setup_complete(struct dasd_device *device) -{ - unsigned long flags; - struct alias_server *server; - struct alias_lcu *lcu; - struct dasd_uid uid; - - device->discipline->get_uid(device, &uid); - lcu = NULL; - spin_lock_irqsave(&aliastree.lock, flags); - server = _find_server(&uid); - if (server) - lcu = _find_lcu(server, &uid); - spin_unlock_irqrestore(&aliastree.lock, flags); - if (!lcu) { - DBF_EVENT_DEVID(DBF_ERR, device->cdev, - "could not find lcu for %04x %02x", - uid.ssid, uid.real_unit_addr); - WARN_ON(1); - return; - } - complete_all(&lcu->lcu_setup); -} - -void dasd_alias_wait_for_lcu_setup(struct dasd_device *device) -{ - unsigned long flags; - struct alias_server *server; - struct alias_lcu *lcu; - struct dasd_uid uid; - - device->discipline->get_uid(device, &uid); - lcu = NULL; - spin_lock_irqsave(&aliastree.lock, flags); - server = _find_server(&uid); - if (server) - lcu = _find_lcu(server, &uid); - spin_unlock_irqrestore(&aliastree.lock, flags); - if (!lcu) { - DBF_EVENT_DEVID(DBF_ERR, device->cdev, - "could not find lcu for %04x %02x", - uid.ssid, uid.real_unit_addr); - WARN_ON(1); - return; - } - wait_for_completion(&lcu->lcu_setup); + return 0; } /* diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index bbcd5e9..70880be 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -1534,6 +1534,10 @@ static void dasd_eckd_validate_server(struct dasd_device *device) struct dasd_eckd_private *private; int enable_pav; + private = (struct dasd_eckd_private *) device->private; + if (private->uid.type == UA_BASE_PAV_ALIAS || + private->uid.type == UA_HYPER_PAV_ALIAS) + return; if (dasd_nopav || MACHINE_IS_VM) enable_pav = 0; else @@ -1542,11 +1546,28 @@ static void dasd_eckd_validate_server(struct dasd_device *device) /* may be requested feature is not available on server, * therefore just report error and go ahead */ - private = (struct dasd_eckd_private *) device->private; DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "PSF-SSC for SSID %04x " "returned rc=%d", private->uid.ssid, rc); } +/* + * worker to do a validate server in case of a lost pathgroup + */ +static void dasd_eckd_do_validate_server(struct work_struct *work) +{ + struct dasd_device *device = container_of(work, struct dasd_device, + kick_validate); + dasd_eckd_validate_server(device); + dasd_put_device(device); +} + +static void dasd_eckd_kick_validate_server(struct dasd_device *device) +{ + dasd_get_device(device); + /* queue call to do_validate_server to the kernel event daemon. */ + schedule_work(&device->kick_validate); +} + static u32 get_fcx_max_data(struct dasd_device *device) { #if defined(CONFIG_64BIT) @@ -1588,10 +1609,13 @@ dasd_eckd_check_characteristics(struct dasd_device *device) struct dasd_eckd_private *private; struct dasd_block *block; struct dasd_uid temp_uid; - int is_known, rc, i; + int rc, i; int readonly; unsigned long value; + /* setup work queue for validate server*/ + INIT_WORK(&device->kick_validate, dasd_eckd_do_validate_server); + if (!ccw_device_is_pathgroup(device->cdev)) { dev_warn(&device->cdev->dev, "A channel path group could not be established\n"); @@ -1651,22 +1675,12 @@ dasd_eckd_check_characteristics(struct dasd_device *device) block->base = device; } - /* register lcu with alias handling, enable PAV if this is a new lcu */ - is_known = dasd_alias_make_device_known_to_lcu(device); - if (is_known < 0) { - rc = is_known; + /* register lcu with alias handling, enable PAV */ + rc = dasd_alias_make_device_known_to_lcu(device); + if (rc) goto out_err2; - } - /* - * dasd_eckd_validate_server is done on the first device that - * is found for an LCU. All later other devices have to wait - * for it, so they will read the correct feature codes. - */ - if (!is_known) { - dasd_eckd_validate_server(device); - dasd_alias_lcu_setup_complete(device); - } else - dasd_alias_wait_for_lcu_setup(device); + + dasd_eckd_validate_server(device); /* device may report different configuration data after LCU setup */ rc = dasd_eckd_read_conf(device); @@ -4098,7 +4112,7 @@ static int dasd_eckd_restore_device(struct dasd_device *device) { struct dasd_eckd_private *private; struct dasd_eckd_characteristics temp_rdc_data; - int is_known, rc; + int rc; struct dasd_uid temp_uid; unsigned long flags; @@ -4121,14 +4135,10 @@ static int dasd_eckd_restore_device(struct dasd_device *device) goto out_err; /* register lcu with alias handling, enable PAV if this is a new lcu */ - is_known = dasd_alias_make_device_known_to_lcu(device); - if (is_known < 0) - return is_known; - if (!is_known) { - dasd_eckd_validate_server(device); - dasd_alias_lcu_setup_complete(device); - } else - dasd_alias_wait_for_lcu_setup(device); + rc = dasd_alias_make_device_known_to_lcu(device); + if (rc) + return rc; + dasd_eckd_validate_server(device); /* RE-Read Configuration Data */ rc = dasd_eckd_read_conf(device); @@ -4270,6 +4280,7 @@ static struct dasd_discipline dasd_eckd_discipline = { .restore = dasd_eckd_restore_device, .reload = dasd_eckd_reload_device, .get_uid = dasd_eckd_get_uid, + .kick_validate = dasd_eckd_kick_validate_server, }; static int __init diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index afe8c33..33a6743 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -355,6 +355,7 @@ struct dasd_discipline { int (*reload) (struct dasd_device *); int (*get_uid) (struct dasd_device *, struct dasd_uid *); + void (*kick_validate) (struct dasd_device *); }; extern struct dasd_discipline *dasd_diag_discipline_pointer; @@ -455,6 +456,7 @@ struct dasd_device { struct work_struct kick_work; struct work_struct restore_device; struct work_struct reload_device; + struct work_struct kick_validate; struct timer_list timer; debug_info_t *debug_area; diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250/8250.c index 9f50c4e..9f50c4e 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250/8250.c diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250/8250.h index ae027be..ae027be 100644 --- a/drivers/tty/serial/8250.h +++ b/drivers/tty/serial/8250/8250.h diff --git a/drivers/tty/serial/8250_accent.c b/drivers/tty/serial/8250/8250_accent.c index 34b51c6..34b51c6 100644 --- a/drivers/tty/serial/8250_accent.c +++ b/drivers/tty/serial/8250/8250_accent.c diff --git a/drivers/tty/serial/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c index b0ce8c5..b0ce8c5 100644 --- a/drivers/tty/serial/8250_acorn.c +++ b/drivers/tty/serial/8250/8250_acorn.c diff --git a/drivers/tty/serial/8250_boca.c b/drivers/tty/serial/8250/8250_boca.c index d125dc1..d125dc1 100644 --- a/drivers/tty/serial/8250_boca.c +++ b/drivers/tty/serial/8250/8250_boca.c diff --git a/drivers/tty/serial/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index f574eef..f574eef 100644 --- a/drivers/tty/serial/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c diff --git a/drivers/tty/serial/8250_early.c b/drivers/tty/serial/8250/8250_early.c index eaafb98..eaafb98 100644 --- a/drivers/tty/serial/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c diff --git a/drivers/tty/serial/8250_exar_st16c554.c b/drivers/tty/serial/8250/8250_exar_st16c554.c index bf53aab..bf53aab 100644 --- a/drivers/tty/serial/8250_exar_st16c554.c +++ b/drivers/tty/serial/8250/8250_exar_st16c554.c diff --git a/drivers/tty/serial/8250_fourport.c b/drivers/tty/serial/8250/8250_fourport.c index be15826..be15826 100644 --- a/drivers/tty/serial/8250_fourport.c +++ b/drivers/tty/serial/8250/8250_fourport.c diff --git a/drivers/tty/serial/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c index f4d3c47..f4d3c47 100644 --- a/drivers/tty/serial/8250_fsl.c +++ b/drivers/tty/serial/8250/8250_fsl.c diff --git a/drivers/tty/serial/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c index d8c0ffb..d8c0ffb 100644 --- a/drivers/tty/serial/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_gsc.c diff --git a/drivers/tty/serial/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c index c13438c..c13438c 100644 --- a/drivers/tty/serial/8250_hp300.c +++ b/drivers/tty/serial/8250/8250_hp300.c diff --git a/drivers/tty/serial/8250_hub6.c b/drivers/tty/serial/8250/8250_hub6.c index a5c778e..a5c778e 100644 --- a/drivers/tty/serial/8250_hub6.c +++ b/drivers/tty/serial/8250/8250_hub6.c diff --git a/drivers/tty/serial/8250_mca.c b/drivers/tty/serial/8250/8250_mca.c index d20abf0..d20abf0 100644 --- a/drivers/tty/serial/8250_mca.c +++ b/drivers/tty/serial/8250/8250_mca.c diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index da2b0b0..da2b0b0 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index a2f2365..a2f2365 100644 --- a/drivers/tty/serial/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig new file mode 100644 index 0000000..591f801 --- /dev/null +++ b/drivers/tty/serial/8250/Kconfig @@ -0,0 +1,280 @@ +# +# The 8250/16550 serial drivers. You shouldn't be in this list unless +# you somehow have an implicit or explicit dependency on SERIAL_8250. +# + +config SERIAL_8250 + tristate "8250/16550 and compatible serial support" + select SERIAL_CORE + ---help--- + This selects whether you want to include the driver for the standard + serial ports. The standard answer is Y. People who might say N + here are those that are setting up dedicated Ethernet WWW/FTP + servers, or users that have one of the various bus mice instead of a + serial mouse and don't intend to use their machine's standard serial + port for anything. (Note that the Cyclades and Stallion multi + serial port drivers do not need this driver built in for them to + work.) + + To compile this driver as a module, choose M here: the + module will be called 8250. + [WARNING: Do not compile this driver as a module if you are using + non-standard serial ports, since the configuration information will + be lost when the driver is unloaded. This limitation may be lifted + in the future.] + + BTW1: If you have a mouseman serial mouse which is not recognized by + the X window system, try running gpm first. + + BTW2: If you intend to use a software modem (also called Winmodem) + under Linux, forget it. These modems are crippled and require + proprietary drivers which are only available under Windows. + + Most people will say Y or M here, so that they can use serial mice, + modems and similar devices connecting to the standard serial ports. + +config SERIAL_8250_CONSOLE + bool "Console on 8250/16550 and compatible serial port" + depends on SERIAL_8250=y + select SERIAL_CORE_CONSOLE + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). This could be useful if some terminal or printer is connected + to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS1". (Try "man bootparam" or see the documentation of + your boot loader (grub or lilo or loadlin) about how to pass options + to the kernel at boot time.) + + If you don't have a VGA card installed and you say Y here, the + kernel will automatically use the first serial line, /dev/ttyS0, as + system console. + + You can set that using a kernel command line option such as + "console=uart8250,io,0x3f8,9600n8" + "console=uart8250,mmio,0xff5e0000,115200n8". + and it will switch to normal serial console when the corresponding + port is ready. + "earlycon=uart8250,io,0x3f8,9600n8" + "earlycon=uart8250,mmio,0xff5e0000,115200n8". + it will not only setup early console. + + If unsure, say N. + +config FIX_EARLYCON_MEM + bool + depends on X86 + default y + +config SERIAL_8250_GSC + tristate + depends on SERIAL_8250 && GSC + default SERIAL_8250 + +config SERIAL_8250_PCI + tristate "8250/16550 PCI device support" if EXPERT + depends on SERIAL_8250 && PCI + default SERIAL_8250 + help + This builds standard PCI serial support. You may be able to + disable this feature if you only need legacy serial support. + Saves about 9K. + +config SERIAL_8250_PNP + tristate "8250/16550 PNP device support" if EXPERT + depends on SERIAL_8250 && PNP + default SERIAL_8250 + help + This builds standard PNP serial support. You may be able to + disable this feature if you only need legacy serial support. + +config SERIAL_8250_HP300 + tristate + depends on SERIAL_8250 && HP300 + default SERIAL_8250 + +config SERIAL_8250_CS + tristate "8250/16550 PCMCIA device support" + depends on PCMCIA && SERIAL_8250 + ---help--- + Say Y here to enable support for 16-bit PCMCIA serial devices, + including serial port cards, modems, and the modem functions of + multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are + credit-card size devices often used with laptops.) + + To compile this driver as a module, choose M here: the + module will be called serial_cs. + + If unsure, say N. + +config SERIAL_8250_NR_UARTS + int "Maximum number of 8250/16550 serial ports" + depends on SERIAL_8250 + default "4" + help + Set this to the number of serial ports you want the driver + to support. This includes any ports discovered via ACPI or + PCI enumeration and any ports that may be added at run-time + via hot-plug, or any ISA multi-port serial cards. + +config SERIAL_8250_RUNTIME_UARTS + int "Number of 8250/16550 serial ports to register at runtime" + depends on SERIAL_8250 + range 0 SERIAL_8250_NR_UARTS + default "4" + help + Set this to the maximum number of serial ports you want + the kernel to register at boot time. This can be overridden + with the module parameter "nr_uarts", or boot-time parameter + 8250.nr_uarts + +config SERIAL_8250_EXTENDED + bool "Extended 8250/16550 serial driver options" + depends on SERIAL_8250 + help + If you wish to use any non-standard features of the standard "dumb" + driver, say Y here. This includes HUB6 support, shared serial + interrupts, special multiport support, support for more than the + four COM 1/2/3/4 boards, etc. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about serial driver options. If unsure, say N. + +config SERIAL_8250_MANY_PORTS + bool "Support more than 4 legacy serial ports" + depends on SERIAL_8250_EXTENDED && !IA64 + help + Say Y here if you have dumb serial boards other than the four + standard COM 1/2/3/4 ports. This may happen if you have an AST + FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available + from <http://www.tldp.org/docs.html#howto>), or other custom + serial port hardware which acts similar to standard serial port + hardware. If you only use the standard COM 1/2/3/4 ports, you can + say N here to save some memory. You can also say Y if you have an + "intelligent" multiport card such as Cyclades, Digiboards, etc. + +# +# Multi-port serial cards +# + +config SERIAL_8250_FOURPORT + tristate "Support Fourport cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an AST FourPort serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_fourport. + +config SERIAL_8250_ACCENT + tristate "Support Accent cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an Accent Async serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_accent. + +config SERIAL_8250_BOCA + tristate "Support Boca cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a Boca serial board. Please read the Boca + mini-HOWTO, available from <http://www.tldp.org/docs.html#howto> + + To compile this driver as a module, choose M here: the module + will be called 8250_boca. + +config SERIAL_8250_EXAR_ST16C554 + tristate "Support Exar ST16C554/554D Quad UART" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + The Uplogix Envoy TU301 uses this Exar Quad UART. If you are + tinkering with your Envoy TU301, or have a machine with this UART, + say Y here. + + To compile this driver as a module, choose M here: the module + will be called 8250_exar_st16c554. + +config SERIAL_8250_HUB6 + tristate "Support Hub6 cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a HUB6 serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_hub6. + +# +# Misc. options/drivers. +# + +config SERIAL_8250_SHARE_IRQ + bool "Support for sharing serial interrupts" + depends on SERIAL_8250_EXTENDED + help + Some serial boards have hardware support which allows multiple dumb + serial ports on the same board to share a single IRQ. To enable + support for this in the serial driver, say Y here. + +config SERIAL_8250_DETECT_IRQ + bool "Autodetect IRQ on standard ports (unsafe)" + depends on SERIAL_8250_EXTENDED + help + Say Y here if you want the kernel to try to guess which IRQ + to use for your serial port. + + This is considered unsafe; it is far better to configure the IRQ in + a boot script using the setserial command. + + If unsure, say N. + +config SERIAL_8250_RSA + bool "Support RSA serial ports" + depends on SERIAL_8250_EXTENDED + help + ::: To be written ::: + +config SERIAL_8250_MCA + tristate "Support 8250-type ports on MCA buses" + depends on SERIAL_8250 != n && MCA + help + Say Y here if you have a MCA serial ports. + + To compile this driver as a module, choose M here: the module + will be called 8250_mca. + +config SERIAL_8250_ACORN + tristate "Acorn expansion card serial port support" + depends on ARCH_ACORN && SERIAL_8250 + help + If you have an Atomwide Serial card or Serial Port card for an Acorn + system, say Y to this option. The driver can handle 1, 2, or 3 port + cards. If unsure, say N. + +config SERIAL_8250_RM9K + bool "Support for MIPS RM9xxx integrated serial port" + depends on SERIAL_8250 != n && SERIAL_RM9000 + select SERIAL_8250_SHARE_IRQ + help + Selecting this option will add support for the integrated serial + port hardware found on MIPS RM9122 and similar processors. + If unsure, say N. + +config SERIAL_8250_FSL + bool + depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550 + default PPC + +config SERIAL_8250_DW + tristate "Support for Synopsys DesignWare 8250 quirks" + depends on SERIAL_8250 && OF + help + Selecting this option will enable handling of the extra features + present in the Synopsys DesignWare APB UART. diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile new file mode 100644 index 0000000..867bba7 --- /dev/null +++ b/drivers/tty/serial/8250/Makefile @@ -0,0 +1,20 @@ +# +# Makefile for the 8250 serial device drivers. +# + +obj-$(CONFIG_SERIAL_8250) += 8250.o +obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o +obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o +obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o +obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o +obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o +obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o +obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o +obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o +obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o +obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o +obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o +obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o +obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o +obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o +obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/8250/m32r_sio.c index 94a6792..94a6792 100644 --- a/drivers/tty/serial/m32r_sio.c +++ b/drivers/tty/serial/8250/m32r_sio.c diff --git a/drivers/tty/serial/m32r_sio.h b/drivers/tty/serial/8250/m32r_sio.h index e9b7e11..e9b7e11 100644 --- a/drivers/tty/serial/m32r_sio.h +++ b/drivers/tty/serial/8250/m32r_sio.h diff --git a/drivers/tty/serial/m32r_sio_reg.h b/drivers/tty/serial/8250/m32r_sio_reg.h index 4671473..4671473 100644 --- a/drivers/tty/serial/m32r_sio_reg.h +++ b/drivers/tty/serial/8250/m32r_sio_reg.h diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index 8609060..8609060 100644 --- a/drivers/tty/serial/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index aca2386..2de9924 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -5,279 +5,7 @@ menu "Serial drivers" depends on HAS_IOMEM -# -# The new 8250/16550 serial drivers -config SERIAL_8250 - tristate "8250/16550 and compatible serial support" - select SERIAL_CORE - ---help--- - This selects whether you want to include the driver for the standard - serial ports. The standard answer is Y. People who might say N - here are those that are setting up dedicated Ethernet WWW/FTP - servers, or users that have one of the various bus mice instead of a - serial mouse and don't intend to use their machine's standard serial - port for anything. (Note that the Cyclades and Stallion multi - serial port drivers do not need this driver built in for them to - work.) - - To compile this driver as a module, choose M here: the - module will be called 8250. - [WARNING: Do not compile this driver as a module if you are using - non-standard serial ports, since the configuration information will - be lost when the driver is unloaded. This limitation may be lifted - in the future.] - - BTW1: If you have a mouseman serial mouse which is not recognized by - the X window system, try running gpm first. - - BTW2: If you intend to use a software modem (also called Winmodem) - under Linux, forget it. These modems are crippled and require - proprietary drivers which are only available under Windows. - - Most people will say Y or M here, so that they can use serial mice, - modems and similar devices connecting to the standard serial ports. - -config SERIAL_8250_CONSOLE - bool "Console on 8250/16550 and compatible serial port" - depends on SERIAL_8250=y - select SERIAL_CORE_CONSOLE - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). This could be useful if some terminal or printer is connected - to that serial port. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyS1". (Try "man bootparam" or see the documentation of - your boot loader (grub or lilo or loadlin) about how to pass options - to the kernel at boot time.) - - If you don't have a VGA card installed and you say Y here, the - kernel will automatically use the first serial line, /dev/ttyS0, as - system console. - - You can set that using a kernel command line option such as - "console=uart8250,io,0x3f8,9600n8" - "console=uart8250,mmio,0xff5e0000,115200n8". - and it will switch to normal serial console when the corresponding - port is ready. - "earlycon=uart8250,io,0x3f8,9600n8" - "earlycon=uart8250,mmio,0xff5e0000,115200n8". - it will not only setup early console. - - If unsure, say N. - -config FIX_EARLYCON_MEM - bool - depends on X86 - default y - -config SERIAL_8250_GSC - tristate - depends on SERIAL_8250 && GSC - default SERIAL_8250 - -config SERIAL_8250_PCI - tristate "8250/16550 PCI device support" if EXPERT - depends on SERIAL_8250 && PCI - default SERIAL_8250 - help - This builds standard PCI serial support. You may be able to - disable this feature if you only need legacy serial support. - Saves about 9K. - -config SERIAL_8250_PNP - tristate "8250/16550 PNP device support" if EXPERT - depends on SERIAL_8250 && PNP - default SERIAL_8250 - help - This builds standard PNP serial support. You may be able to - disable this feature if you only need legacy serial support. - -config SERIAL_8250_FSL - bool - depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550 - default PPC - -config SERIAL_8250_HP300 - tristate - depends on SERIAL_8250 && HP300 - default SERIAL_8250 - -config SERIAL_8250_CS - tristate "8250/16550 PCMCIA device support" - depends on PCMCIA && SERIAL_8250 - ---help--- - Say Y here to enable support for 16-bit PCMCIA serial devices, - including serial port cards, modems, and the modem functions of - multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are - credit-card size devices often used with laptops.) - - To compile this driver as a module, choose M here: the - module will be called serial_cs. - - If unsure, say N. - -config SERIAL_8250_NR_UARTS - int "Maximum number of 8250/16550 serial ports" - depends on SERIAL_8250 - default "4" - help - Set this to the number of serial ports you want the driver - to support. This includes any ports discovered via ACPI or - PCI enumeration and any ports that may be added at run-time - via hot-plug, or any ISA multi-port serial cards. - -config SERIAL_8250_RUNTIME_UARTS - int "Number of 8250/16550 serial ports to register at runtime" - depends on SERIAL_8250 - range 0 SERIAL_8250_NR_UARTS - default "4" - help - Set this to the maximum number of serial ports you want - the kernel to register at boot time. This can be overridden - with the module parameter "nr_uarts", or boot-time parameter - 8250.nr_uarts - -config SERIAL_8250_EXTENDED - bool "Extended 8250/16550 serial driver options" - depends on SERIAL_8250 - help - If you wish to use any non-standard features of the standard "dumb" - driver, say Y here. This includes HUB6 support, shared serial - interrupts, special multiport support, support for more than the - four COM 1/2/3/4 boards, etc. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about serial driver options. If unsure, say N. - -config SERIAL_8250_MANY_PORTS - bool "Support more than 4 legacy serial ports" - depends on SERIAL_8250_EXTENDED && !IA64 - help - Say Y here if you have dumb serial boards other than the four - standard COM 1/2/3/4 ports. This may happen if you have an AST - FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available - from <http://www.tldp.org/docs.html#howto>), or other custom - serial port hardware which acts similar to standard serial port - hardware. If you only use the standard COM 1/2/3/4 ports, you can - say N here to save some memory. You can also say Y if you have an - "intelligent" multiport card such as Cyclades, Digiboards, etc. - -# -# Multi-port serial cards -# - -config SERIAL_8250_FOURPORT - tristate "Support Fourport cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have an AST FourPort serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_fourport. - -config SERIAL_8250_ACCENT - tristate "Support Accent cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have an Accent Async serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_accent. - -config SERIAL_8250_BOCA - tristate "Support Boca cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have a Boca serial board. Please read the Boca - mini-HOWTO, available from <http://www.tldp.org/docs.html#howto> - - To compile this driver as a module, choose M here: the module - will be called 8250_boca. - -config SERIAL_8250_EXAR_ST16C554 - tristate "Support Exar ST16C554/554D Quad UART" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - The Uplogix Envoy TU301 uses this Exar Quad UART. If you are - tinkering with your Envoy TU301, or have a machine with this UART, - say Y here. - - To compile this driver as a module, choose M here: the module - will be called 8250_exar_st16c554. - -config SERIAL_8250_HUB6 - tristate "Support Hub6 cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have a HUB6 serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_hub6. - -config SERIAL_8250_SHARE_IRQ - bool "Support for sharing serial interrupts" - depends on SERIAL_8250_EXTENDED - help - Some serial boards have hardware support which allows multiple dumb - serial ports on the same board to share a single IRQ. To enable - support for this in the serial driver, say Y here. - -config SERIAL_8250_DETECT_IRQ - bool "Autodetect IRQ on standard ports (unsafe)" - depends on SERIAL_8250_EXTENDED - help - Say Y here if you want the kernel to try to guess which IRQ - to use for your serial port. - - This is considered unsafe; it is far better to configure the IRQ in - a boot script using the setserial command. - - If unsure, say N. - -config SERIAL_8250_RSA - bool "Support RSA serial ports" - depends on SERIAL_8250_EXTENDED - help - ::: To be written ::: - -config SERIAL_8250_MCA - tristate "Support 8250-type ports on MCA buses" - depends on SERIAL_8250 != n && MCA - help - Say Y here if you have a MCA serial ports. - - To compile this driver as a module, choose M here: the module - will be called 8250_mca. - -config SERIAL_8250_ACORN - tristate "Acorn expansion card serial port support" - depends on ARCH_ACORN && SERIAL_8250 - help - If you have an Atomwide Serial card or Serial Port card for an Acorn - system, say Y to this option. The driver can handle 1, 2, or 3 port - cards. If unsure, say N. - -config SERIAL_8250_RM9K - bool "Support for MIPS RM9xxx integrated serial port" - depends on SERIAL_8250 != n && SERIAL_RM9000 - select SERIAL_8250_SHARE_IRQ - help - Selecting this option will add support for the integrated serial - port hardware found on MIPS RM9122 and similar processors. - If unsure, say N. - -config SERIAL_8250_DW - tristate "Support for Synopsys DesignWare 8250 quirks" - depends on SERIAL_8250 && OF - help - Selecting this option will enable handling of the extra features - present in the Synopsys DesignWare APB UART. +source "drivers/tty/serial/8250/Kconfig" comment "Non-8250 serial port support" @@ -536,15 +264,6 @@ config SERIAL_MAX3107 help MAX3107 chip support -config SERIAL_MAX3107_AAVA - tristate "MAX3107 AAVA platform support" - depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB - select SERIAL_CORE - help - Support for the MAX3107 chip configuration found on the AAVA - platform. Includes the extra initialisation and GPIO support - neded for this device. - config SERIAL_DZ bool "DECstation DZ serial driver" depends on MACH_DECSTATION && 32BIT diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index f5b01f2..fef32e1 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -14,22 +14,9 @@ obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o -obj-$(CONFIG_SERIAL_8250) += 8250.o -obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o -obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o -obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o -obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o -obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o -obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o -obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o -obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o -obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o -obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o -obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o -obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o -obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o -obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o -obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o +# Now bring in any enabled 8250/16450/16550 type drivers. +obj-$(CONFIG_SERIAL_8250) += 8250/ + obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o @@ -42,7 +29,6 @@ obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_MAX3107) += max3107.o -obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o obj-$(CONFIG_SERIAL_68328) += 68328serial.o diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 9ae0240..6800f5f 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -159,6 +159,7 @@ struct uart_amba_port { unsigned int fifosize; /* vendor-specific */ unsigned int lcrh_tx; /* vendor-specific */ unsigned int lcrh_rx; /* vendor-specific */ + unsigned int old_cr; /* state during shutdown */ bool autorts; char type[12]; bool interrupt_may_hang; /* vendor-specific */ @@ -1411,7 +1412,9 @@ static int pl011_startup(struct uart_port *port) while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) barrier(); - cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; + /* restore RTS and DTR */ + cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR); + cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; writew(cr, uap->port.membase + UART011_CR); /* Clear pending error interrupts */ @@ -1469,6 +1472,7 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap, static void pl011_shutdown(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; /* * disable all interrupts @@ -1488,9 +1492,16 @@ static void pl011_shutdown(struct uart_port *port) /* * disable the port + * disable the port. It should not disable RTS and DTR. + * Also RTS and DTR state should be preserved to restore + * it during startup(). */ uap->autorts = false; - writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR); + cr = readw(uap->port.membase + UART011_CR); + uap->old_cr = cr; + cr &= UART011_CR_RTS | UART011_CR_DTR; + cr |= UART01x_CR_UARTEN | UART011_CR_TXE; + writew(cr, uap->port.membase + UART011_CR); /* * disable break condition and fifos @@ -1740,9 +1751,19 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) { struct uart_amba_port *uap = amba_ports[co->index]; unsigned int status, old_cr, new_cr; + unsigned long flags; + int locked = 1; clk_enable(uap->clk); + local_irq_save(flags); + if (uap->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&uap->port.lock); + else + spin_lock(&uap->port.lock); + /* * First save the CR then disable the interrupts */ @@ -1762,6 +1783,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) } while (status & UART01x_FR_BUSY); writew(old_cr, uap->port.membase + UART011_CR); + if (locked) + spin_unlock(&uap->port.lock); + local_irq_restore(flags); + clk_disable(uap->clk); } @@ -1905,6 +1930,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->vendor = vendor; uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; + uap->old_cr = 0; uap->fifosize = vendor->fifosize; uap->interrupt_may_hang = vendor->interrupt_may_hang; uap->port.dev = &dev->dev; diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c index 7c867a0..7545fe1 100644 --- a/drivers/tty/serial/jsm/jsm_driver.c +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -251,6 +251,7 @@ static void jsm_io_resume(struct pci_dev *pdev) struct jsm_board *brd = pci_get_drvdata(pdev); pci_restore_state(pdev); + pci_save_state(pdev); jsm_uart_port_init(brd); } diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c deleted file mode 100644 index aae772a..0000000 --- a/drivers/tty/serial/max3107-aava.c +++ /dev/null @@ -1,344 +0,0 @@ -/* - * max3107.c - spi uart protocol driver for Maxim 3107 - * Based on max3100.c - * by Christian Pellegrin <chripell@evolware.org> - * and max3110.c - * by Feng Tang <feng.tang@intel.com> - * - * Copyright (C) Aavamobile 2009 - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - */ - -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/serial_core.h> -#include <linux/serial.h> -#include <linux/spi/spi.h> -#include <linux/freezer.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/sfi.h> -#include <linux/module.h> -#include <asm/mrst.h> -#include "max3107.h" - -/* GPIO direction to input function */ -static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration register */ - buf[0] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to input */ - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO configuration register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO direction to output function */ -static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration and data registers */ - buf[0] = MAX3107_GPIOCFG_REG; - buf[1] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, "SPI transfer gpio failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to output */ - buf[0] |= (0x0001 << offset); - /* Set value */ - if (value) - buf[1] |= (0x0001 << offset); - else - buf[1] &= ~(0x0001 << offset); - - /* Write new GPIO configuration and data register values */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO conf data w failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO value query function */ -static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO data register */ - buf[0] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Return value */ - return buf[0] & (0x0001 << offset); -} - -/* GPIO value set function */ -static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return; - } - - /* Read current GPIO configuration registers*/ - buf[0] = MAX3107_GPIODATA_REG; - buf[1] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO data and config read failed\n"); - return; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - if (!(buf[1] & (0x0001 << offset))) { - /* Configured as input, can't set value */ - dev_warn(&s->spi->dev, - "Trying to set value for input GPIO\n"); - return; - } - - /* Set value */ - if (value) - buf[0] |= (0x0001 << offset); - else - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO data register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n"); -} - -/* GPIO chip data */ -static struct gpio_chip max3107_gpio_chip = { - .owner = THIS_MODULE, - .direction_input = max3107_gpio_direction_in, - .direction_output = max3107_gpio_direction_out, - .get = max3107_gpio_get, - .set = max3107_gpio_set, - .can_sleep = 1, - .base = MAX3107_GPIO_BASE, - .ngpio = MAX3107_GPIO_COUNT, -}; - -/** - * max3107_aava_reset - reset on AAVA systems - * @spi: The SPI device we are probing - * - * Reset the device ready for probing. - */ - -static int max3107_aava_reset(struct spi_device *spi) -{ - /* Reset the chip */ - if (gpio_request(MAX3107_RESET_GPIO, "max3107")) { - pr_err("Requesting RESET GPIO failed\n"); - return -EIO; - } - if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) { - pr_err("Setting RESET GPIO to 0 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - msleep(MAX3107_RESET_DELAY); - if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) { - pr_err("Setting RESET GPIO to 1 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - gpio_free(MAX3107_RESET_GPIO); - msleep(MAX3107_WAKEUP_DELAY); - return 0; -} - -static int max3107_aava_configure(struct max3107_port *s) -{ - int retval; - - /* Initialize GPIO chip data */ - s->chip = max3107_gpio_chip; - s->chip.label = s->spi->modalias; - s->chip.dev = &s->spi->dev; - - /* Add GPIO chip */ - retval = gpiochip_add(&s->chip); - if (retval) { - dev_err(&s->spi->dev, "Adding GPIO chip failed\n"); - return retval; - } - - /* Temporary fix for EV2 boot problems, set modem reset to 0 */ - max3107_gpio_direction_out(&s->chip, 3, 0); - return 0; -} - -#if 0 -/* This will get enabled once we have the board stuff merged for this - specific case */ - -static const struct baud_table brg13_ext[] = { - { 300, MAX3107_BRG13_B300 }, - { 600, MAX3107_BRG13_B600 }, - { 1200, MAX3107_BRG13_B1200 }, - { 2400, MAX3107_BRG13_B2400 }, - { 4800, MAX3107_BRG13_B4800 }, - { 9600, MAX3107_BRG13_B9600 }, - { 19200, MAX3107_BRG13_B19200 }, - { 57600, MAX3107_BRG13_B57600 }, - { 115200, MAX3107_BRG13_B115200 }, - { 230400, MAX3107_BRG13_B230400 }, - { 460800, MAX3107_BRG13_B460800 }, - { 921600, MAX3107_BRG13_B921600 }, - { 0, 0 } -}; - -static void max3107_aava_init(struct max3107_port *s) -{ - /*override for AAVA SC specific*/ - if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) { - if (get_koski_build_id() <= KOSKI_EV2) - if (s->ext_clk) { - s->brg_cfg = MAX3107_BRG13_B9600; - s->baud_tbl = (struct baud_table *)brg13_ext; - } - } -} -#endif - -static int __devexit max3107_aava_remove(struct spi_device *spi) -{ - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - /* Remove GPIO chip */ - if (gpiochip_remove(&s->chip)) - dev_warn(&spi->dev, "Removing GPIO chip failed\n"); - - /* Then do the default remove */ - return max3107_remove(spi); -} - -/* Platform data */ -static struct max3107_plat aava_plat_data = { - .loopback = 0, - .ext_clk = 1, -/* .init = max3107_aava_init, */ - .configure = max3107_aava_configure, - .hw_suspend = max3107_hw_susp, - .polled_mode = 0, - .poll_time = 0, -}; - - -static int __devinit max3107_probe_aava(struct spi_device *spi) -{ - int err = max3107_aava_reset(spi); - if (err < 0) - return err; - return max3107_probe(spi, &aava_plat_data); -} - -/* Spi driver data */ -static struct spi_driver max3107_driver = { - .driver = { - .name = "aava-max3107", - .owner = THIS_MODULE, - }, - .probe = max3107_probe_aava, - .remove = __devexit_p(max3107_aava_remove), - .suspend = max3107_suspend, - .resume = max3107_resume, -}; - -/* Driver init function */ -static int __init max3107_init(void) -{ - return spi_register_driver(&max3107_driver); -} - -/* Driver exit function */ -static void __exit max3107_exit(void) -{ - spi_unregister_driver(&max3107_driver); -} - -module_init(max3107_init); -module_exit(max3107_exit); - -MODULE_DESCRIPTION("MAX3107 driver"); -MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("spi:aava-max3107"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index d192dcb..1c24269 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1160,7 +1160,7 @@ static struct uart_driver serial_omap_reg = { .cons = OMAP_CONSOLE, }; -#ifdef CONFIG_SUSPEND +#ifdef CONFIG_PM_SLEEP static int serial_omap_suspend(struct device *dev) { struct uart_omap_port *up = dev_get_drvdata(dev); @@ -1521,6 +1521,7 @@ static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1) } } +#ifdef CONFIG_PM_RUNTIME static void serial_omap_restore_context(struct uart_omap_port *up) { if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) @@ -1550,7 +1551,6 @@ static void serial_omap_restore_context(struct uart_omap_port *up) serial_out(up, UART_OMAP_MDR1, up->mdr1); } -#ifdef CONFIG_PM_RUNTIME static int serial_omap_runtime_suspend(struct device *dev) { struct uart_omap_port *up = dev_get_drvdata(dev); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index c7bf31a..1305618 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2348,11 +2348,11 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) */ tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev); if (likely(!IS_ERR(tty_dev))) { - device_init_wakeup(tty_dev, 1); - device_set_wakeup_enable(tty_dev, 0); - } else + device_set_wakeup_capable(tty_dev, 1); + } else { printk(KERN_ERR "Cannot register tty device on line %d\n", uport->line); + } /* * Ensure UPF_DEAD is not set. diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index ef9dd62..bf6e238 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -227,7 +227,6 @@ int tty_port_block_til_ready(struct tty_port *port, int do_clocal = 0, retval; unsigned long flags; DEFINE_WAIT(wait); - int cd; /* block if port is in the process of being closed */ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { @@ -284,11 +283,14 @@ int tty_port_block_til_ready(struct tty_port *port, retval = -ERESTARTSYS; break; } - /* Probe the carrier. For devices with no carrier detect this - will always return true */ - cd = tty_port_carrier_raised(port); + /* + * Probe the carrier. For devices with no carrier detect + * tty_port_carrier_raised will always return true. + * Never ask drivers if CLOCAL is set, this causes troubles + * on some hardware. + */ if (!(port->flags & ASYNC_CLOSING) && - (do_clocal || cd)) + (do_clocal || tty_port_carrier_raised(port))) break; if (signal_pending(current)) { retval = -ERESTARTSYS; diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 1c50baf..d2b3cff 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -57,6 +57,8 @@ MODULE_DEVICE_TABLE (usb, wdm_ids); #define WDM_MAX 16 +/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */ +#define WDM_DEFAULT_BUFSIZE 256 static DEFINE_MUTEX(wdm_mutex); @@ -88,7 +90,8 @@ struct wdm_device { int count; dma_addr_t shandle; dma_addr_t ihandle; - struct mutex lock; + struct mutex wlock; + struct mutex rlock; wait_queue_head_t wait; struct work_struct rxwork; int werr; @@ -323,7 +326,7 @@ static ssize_t wdm_write } /* concurrent writes and disconnect */ - r = mutex_lock_interruptible(&desc->lock); + r = mutex_lock_interruptible(&desc->wlock); rv = -ERESTARTSYS; if (r) { kfree(buf); @@ -386,7 +389,7 @@ static ssize_t wdm_write out: usb_autopm_put_interface(desc->intf); outnp: - mutex_unlock(&desc->lock); + mutex_unlock(&desc->wlock); outnl: return rv < 0 ? rv : count; } @@ -399,7 +402,7 @@ static ssize_t wdm_read struct wdm_device *desc = file->private_data; - rv = mutex_lock_interruptible(&desc->lock); /*concurrent reads */ + rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */ if (rv < 0) return -ERESTARTSYS; @@ -467,14 +470,16 @@ retry: for (i = 0; i < desc->length - cntr; i++) desc->ubuf[i] = desc->ubuf[i + cntr]; + spin_lock_irq(&desc->iuspin); desc->length -= cntr; + spin_unlock_irq(&desc->iuspin); /* in case we had outstanding data */ if (!desc->length) clear_bit(WDM_READ, &desc->flags); rv = cntr; err: - mutex_unlock(&desc->lock); + mutex_unlock(&desc->rlock); return rv; } @@ -540,7 +545,8 @@ static int wdm_open(struct inode *inode, struct file *file) } intf->needs_remote_wakeup = 1; - mutex_lock(&desc->lock); + /* using write lock to protect desc->count */ + mutex_lock(&desc->wlock); if (!desc->count++) { desc->werr = 0; desc->rerr = 0; @@ -553,7 +559,7 @@ static int wdm_open(struct inode *inode, struct file *file) } else { rv = 0; } - mutex_unlock(&desc->lock); + mutex_unlock(&desc->wlock); usb_autopm_put_interface(desc->intf); out: mutex_unlock(&wdm_mutex); @@ -565,9 +571,11 @@ static int wdm_release(struct inode *inode, struct file *file) struct wdm_device *desc = file->private_data; mutex_lock(&wdm_mutex); - mutex_lock(&desc->lock); + + /* using write lock to protect desc->count */ + mutex_lock(&desc->wlock); desc->count--; - mutex_unlock(&desc->lock); + mutex_unlock(&desc->wlock); if (!desc->count) { dev_dbg(&desc->intf->dev, "wdm_release: cleanup"); @@ -630,7 +638,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id) struct usb_cdc_dmm_desc *dmhd; u8 *buffer = intf->altsetting->extra; int buflen = intf->altsetting->extralen; - u16 maxcom = 0; + u16 maxcom = WDM_DEFAULT_BUFSIZE; if (!buffer) goto out; @@ -665,7 +673,8 @@ next_desc: desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL); if (!desc) goto out; - mutex_init(&desc->lock); + mutex_init(&desc->rlock); + mutex_init(&desc->wlock); spin_lock_init(&desc->iuspin); init_waitqueue_head(&desc->wait); desc->wMaxCommand = maxcom; @@ -716,7 +725,7 @@ next_desc: goto err; desc->inbuf = usb_alloc_coherent(interface_to_usbdev(intf), - desc->bMaxPacketSize0, + desc->wMaxCommand, GFP_KERNEL, &desc->response->transfer_dma); if (!desc->inbuf) @@ -779,11 +788,13 @@ static void wdm_disconnect(struct usb_interface *intf) /* to terminate pending flushes */ clear_bit(WDM_IN_USE, &desc->flags); spin_unlock_irqrestore(&desc->iuspin, flags); - mutex_lock(&desc->lock); + wake_up_all(&desc->wait); + mutex_lock(&desc->rlock); + mutex_lock(&desc->wlock); kill_urbs(desc); cancel_work_sync(&desc->rxwork); - mutex_unlock(&desc->lock); - wake_up_all(&desc->wait); + mutex_unlock(&desc->wlock); + mutex_unlock(&desc->rlock); if (!desc->count) cleanup(desc); mutex_unlock(&wdm_mutex); @@ -798,8 +809,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message) dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor); /* if this is an autosuspend the caller does the locking */ - if (!PMSG_IS_AUTO(message)) - mutex_lock(&desc->lock); + if (!PMSG_IS_AUTO(message)) { + mutex_lock(&desc->rlock); + mutex_lock(&desc->wlock); + } spin_lock_irq(&desc->iuspin); if (PMSG_IS_AUTO(message) && @@ -815,8 +828,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message) kill_urbs(desc); cancel_work_sync(&desc->rxwork); } - if (!PMSG_IS_AUTO(message)) - mutex_unlock(&desc->lock); + if (!PMSG_IS_AUTO(message)) { + mutex_unlock(&desc->wlock); + mutex_unlock(&desc->rlock); + } return rv; } @@ -854,7 +869,8 @@ static int wdm_pre_reset(struct usb_interface *intf) { struct wdm_device *desc = usb_get_intfdata(intf); - mutex_lock(&desc->lock); + mutex_lock(&desc->rlock); + mutex_lock(&desc->wlock); kill_urbs(desc); /* @@ -876,7 +892,8 @@ static int wdm_post_reset(struct usb_interface *intf) int rv; rv = recover_from_urb_loss(desc); - mutex_unlock(&desc->lock); + mutex_unlock(&desc->wlock); + mutex_unlock(&desc->rlock); return 0; } diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 2f51de5..c8df1dd 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -126,7 +126,6 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, struct dwc3_request *req) { struct dwc3 *dwc = dep->dwc; - u32 type; int ret = 0; req->request.actual = 0; @@ -149,20 +148,14 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, direction = !!(dep->flags & DWC3_EP0_DIR_IN); - if (dwc->ep0state == EP0_STATUS_PHASE) { - type = dwc->three_stage_setup - ? DWC3_TRBCTL_CONTROL_STATUS3 - : DWC3_TRBCTL_CONTROL_STATUS2; - } else if (dwc->ep0state == EP0_DATA_PHASE) { - type = DWC3_TRBCTL_CONTROL_DATA; - } else { - /* should never happen */ - WARN_ON(1); + if (dwc->ep0state != EP0_DATA_PHASE) { + dev_WARN(dwc->dev, "Unexpected pending request\n"); return 0; } ret = dwc3_ep0_start_trans(dwc, direction, - req->request.dma, req->request.length, type); + req->request.dma, req->request.length, + DWC3_TRBCTL_CONTROL_DATA); dep->flags &= ~(DWC3_EP_PENDING_REQUEST | DWC3_EP0_DIR_IN); } else if (dwc->delayed_status) { diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index a696bde..064b6e2 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -101,7 +101,7 @@ void dwc3_unmap_buffer_from_dma(struct dwc3_request *req) if (req->request.num_mapped_sgs) { req->request.dma = DMA_ADDR_INVALID; dma_unmap_sg(dwc->dev, req->request.sg, - req->request.num_sgs, + req->request.num_mapped_sgs, req->direction ? DMA_TO_DEVICE : DMA_FROM_DEVICE); diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index a95de6a..baaebf2 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -175,13 +175,12 @@ ep_found: _ep->comp_desc = comp_desc; if (g->speed == USB_SPEED_SUPER) { switch (usb_endpoint_type(_ep->desc)) { - case USB_ENDPOINT_XFER_BULK: - case USB_ENDPOINT_XFER_INT: - _ep->maxburst = comp_desc->bMaxBurst; - break; case USB_ENDPOINT_XFER_ISOC: /* mult: bits 1:0 of bmAttributes */ _ep->mult = comp_desc->bmAttributes & 0x3; + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + _ep->maxburst = comp_desc->bMaxBurst; break; default: /* Do nothing for control endpoints */ diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 753aa06..e0e6375 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -126,7 +126,7 @@ ep_matches ( * descriptor and see if the EP matches it */ if (usb_endpoint_xfer_bulk(desc)) { - if (ep_comp) { + if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) { num_req_streams = ep_comp->bmAttributes & 0x1f; if (num_req_streams > ep->max_streams) return 0; diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 6353eca..ee8ceec 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -3123,15 +3123,15 @@ fsg_add(struct usb_composite_dev *cdev, struct usb_configuration *c, struct fsg_module_parameters { char *file[FSG_MAX_LUNS]; - int ro[FSG_MAX_LUNS]; - int removable[FSG_MAX_LUNS]; - int cdrom[FSG_MAX_LUNS]; - int nofua[FSG_MAX_LUNS]; + bool ro[FSG_MAX_LUNS]; + bool removable[FSG_MAX_LUNS]; + bool cdrom[FSG_MAX_LUNS]; + bool nofua[FSG_MAX_LUNS]; unsigned int file_count, ro_count, removable_count, cdrom_count; unsigned int nofua_count; unsigned int luns; /* nluns */ - int stall; /* can_stall */ + bool stall; /* can_stall */ }; #define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc) \ diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index d7ea6c0..b04712f 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1430,7 +1430,7 @@ static void setup_received_irq(struct fsl_udc *udc, int pipe = get_pipe_by_windex(wIndex); struct fsl_ep *ep; - if (wValue != 0 || wLength != 0 || pipe > udc->max_ep) + if (wValue != 0 || wLength != 0 || pipe >= udc->max_ep) break; ep = get_ep_by_pipe(udc, pipe); @@ -1673,7 +1673,7 @@ static void dtd_complete_irq(struct fsl_udc *udc) if (!bit_pos) return; - for (i = 0; i < udc->max_ep * 2; i++) { + for (i = 0; i < udc->max_ep; i++) { ep_num = i >> 1; direction = i % 2; diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index fa0fcc1..e2293c1 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -11,11 +11,6 @@ /* #undef DEBUG */ /* #undef VERBOSE_DEBUG */ -#if defined(CONFIG_USB_LANGWELL_OTG) -#define OTG_TRANSCEIVER -#endif - - #include <linux/module.h> #include <linux/pci.h> #include <linux/dma-mapping.h> @@ -1522,8 +1517,7 @@ static void langwell_udc_stop(struct langwell_udc *dev) /* stop all USB activities */ -static void stop_activity(struct langwell_udc *dev, - struct usb_gadget_driver *driver) +static void stop_activity(struct langwell_udc *dev) { struct langwell_ep *ep; dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); @@ -1535,9 +1529,9 @@ static void stop_activity(struct langwell_udc *dev, } /* report disconnect; the driver is already quiesced */ - if (driver) { + if (dev->driver) { spin_unlock(&dev->lock); - driver->disconnect(&dev->gadget); + dev->driver->disconnect(&dev->gadget); spin_lock(&dev->lock); } @@ -1925,11 +1919,10 @@ static int langwell_stop(struct usb_gadget *g, /* stop all usb activities */ dev->gadget.speed = USB_SPEED_UNKNOWN; - stop_activity(dev, driver); - spin_unlock_irqrestore(&dev->lock, flags); - dev->gadget.dev.driver = NULL; dev->driver = NULL; + stop_activity(dev); + spin_unlock_irqrestore(&dev->lock, flags); device_remove_file(&dev->pdev->dev, &dev_attr_function); @@ -2315,13 +2308,9 @@ static void handle_setup_packet(struct langwell_udc *dev, if (!gadget_is_otg(&dev->gadget)) break; - else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) { + else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) dev->gadget.b_hnp_enable = 1; -#ifdef OTG_TRANSCEIVER - if (!dev->lotg->otg.default_a) - dev->lotg->hsm.b_hnp_enable = 1; -#endif - } else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT) + else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT) dev->gadget.a_hnp_support = 1; else if (setup->bRequest == USB_DEVICE_A_ALT_HNP_SUPPORT) @@ -2733,7 +2722,7 @@ static void handle_usb_reset(struct langwell_udc *dev) dev->bus_reset = 1; /* reset all the queues, stop all USB activities */ - stop_activity(dev, dev->driver); + stop_activity(dev); dev->usb_state = USB_STATE_DEFAULT; } else { dev_vdbg(&dev->pdev->dev, "device controller reset\n"); @@ -2741,7 +2730,7 @@ static void handle_usb_reset(struct langwell_udc *dev) langwell_udc_reset(dev); /* reset all the queues, stop all USB activities */ - stop_activity(dev, dev->driver); + stop_activity(dev); /* reset ep0 dQH and endptctrl */ ep0_reset(dev); @@ -2752,12 +2741,6 @@ static void handle_usb_reset(struct langwell_udc *dev) dev->usb_state = USB_STATE_ATTACHED; } -#ifdef OTG_TRANSCEIVER - /* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */ - if (!dev->lotg->otg.default_a) - dev->lotg->hsm.b_hnp_enable = 0; -#endif - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); } @@ -2770,29 +2753,6 @@ static void handle_bus_suspend(struct langwell_udc *dev) dev->resume_state = dev->usb_state; dev->usb_state = USB_STATE_SUSPENDED; -#ifdef OTG_TRANSCEIVER - if (dev->lotg->otg.default_a) { - if (dev->lotg->hsm.b_bus_suspend_vld == 1) { - dev->lotg->hsm.b_bus_suspend = 1; - /* notify transceiver the state changes */ - if (spin_trylock(&dev->lotg->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&dev->lotg->wq_lock); - } - } - dev->lotg->hsm.b_bus_suspend_vld++; - } else { - if (!dev->lotg->hsm.a_bus_suspend) { - dev->lotg->hsm.a_bus_suspend = 1; - /* notify transceiver the state changes */ - if (spin_trylock(&dev->lotg->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&dev->lotg->wq_lock); - } - } - } -#endif - /* report suspend to the driver */ if (dev->driver) { if (dev->driver->suspend) { @@ -2823,11 +2783,6 @@ static void handle_bus_resume(struct langwell_udc *dev) if (dev->pdev->device != 0x0829) langwell_phy_low_power(dev, 0); -#ifdef OTG_TRANSCEIVER - if (dev->lotg->otg.default_a == 0) - dev->lotg->hsm.a_bus_suspend = 0; -#endif - /* report resume to the driver */ if (dev->driver) { if (dev->driver->resume) { @@ -3020,7 +2975,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) dev->done = &done; -#ifndef OTG_TRANSCEIVER /* free dTD dma_pool and dQH */ if (dev->dtd_pool) dma_pool_destroy(dev->dtd_pool); @@ -3032,7 +2986,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) /* release SRAM caching */ if (dev->has_sram && dev->got_sram) sram_deinit(dev); -#endif if (dev->status_req) { kfree(dev->status_req->req.buf); @@ -3045,7 +2998,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) if (dev->got_irq) free_irq(pdev->irq, dev); -#ifndef OTG_TRANSCEIVER if (dev->cap_regs) iounmap(dev->cap_regs); @@ -3055,13 +3007,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) if (dev->enabled) pci_disable_device(pdev); -#else - if (dev->transceiver) { - otg_put_transceiver(dev->transceiver); - dev->transceiver = NULL; - dev->lotg = NULL; - } -#endif dev->cap_regs = NULL; @@ -3072,9 +3017,7 @@ static void langwell_udc_remove(struct pci_dev *pdev) device_remove_file(&pdev->dev, &dev_attr_langwell_udc); device_remove_file(&pdev->dev, &dev_attr_remote_wakeup); -#ifndef OTG_TRANSCEIVER pci_set_drvdata(pdev, NULL); -#endif /* free dev, wait for the release() finished */ wait_for_completion(&done); @@ -3089,9 +3032,7 @@ static int langwell_udc_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct langwell_udc *dev; -#ifndef OTG_TRANSCEIVER unsigned long resource, len; -#endif void __iomem *base = NULL; size_t size; int retval; @@ -3109,16 +3050,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, dev->pdev = pdev; dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); -#ifdef OTG_TRANSCEIVER - /* PCI device is already enabled by otg_transceiver driver */ - dev->enabled = 1; - - /* mem region and register base */ - dev->region = 1; - dev->transceiver = otg_get_transceiver(); - dev->lotg = otg_to_langwell(dev->transceiver); - base = dev->lotg->regs; -#else pci_set_drvdata(pdev, dev); /* now all the pci goodies ... */ @@ -3139,7 +3070,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, dev->region = 1; base = ioremap_nocache(resource, len); -#endif if (base == NULL) { dev_err(&dev->pdev->dev, "can't map memory\n"); retval = -EFAULT; @@ -3163,7 +3093,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, dev->got_sram = 0; dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram); -#ifndef OTG_TRANSCEIVER /* enable SRAM caching if detected */ if (dev->has_sram && !dev->got_sram) sram_init(dev); @@ -3182,7 +3111,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, goto error; } dev->got_irq = 1; -#endif /* set stopped bit */ dev->stopped = 1; @@ -3257,10 +3185,8 @@ static int langwell_udc_probe(struct pci_dev *pdev, dev->remote_wakeup = 0; dev->dev_status = 1 << USB_DEVICE_SELF_POWERED; -#ifndef OTG_TRANSCEIVER /* reset device controller */ langwell_udc_reset(dev); -#endif /* initialize gadget structure */ dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */ @@ -3268,9 +3194,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */ dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */ dev->gadget.max_speed = USB_SPEED_HIGH; /* support dual speed */ -#ifdef OTG_TRANSCEIVER - dev->gadget.is_otg = 1; /* support otg mode */ -#endif /* the "gadget" abstracts/virtualizes the controller */ dev_set_name(&dev->gadget.dev, "gadget"); @@ -3282,10 +3205,8 @@ static int langwell_udc_probe(struct pci_dev *pdev, /* controller endpoints reinit */ eps_reinit(dev); -#ifndef OTG_TRANSCEIVER /* reset ep0 dQH and endptctrl */ ep0_reset(dev); -#endif /* create dTD dma_pool resource */ dev->dtd_pool = dma_pool_create("langwell_dtd", @@ -3367,7 +3288,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state) spin_lock_irq(&dev->lock); /* stop all usb activities */ - stop_activity(dev, dev->driver); + stop_activity(dev); spin_unlock_irq(&dev->lock); /* free dTD dma_pool and dQH */ @@ -3525,22 +3446,14 @@ static struct pci_driver langwell_pci_driver = { static int __init init(void) { -#ifdef OTG_TRANSCEIVER - return langwell_register_peripheral(&langwell_pci_driver); -#else return pci_register_driver(&langwell_pci_driver); -#endif } module_init(init); static void __exit cleanup(void) { -#ifdef OTG_TRANSCEIVER - return langwell_unregister_peripheral(&langwell_pci_driver); -#else pci_unregister_driver(&langwell_pci_driver); -#endif } module_exit(cleanup); diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h index ef79e24..d6e78ac 100644 --- a/drivers/usb/gadget/langwell_udc.h +++ b/drivers/usb/gadget/langwell_udc.h @@ -8,7 +8,6 @@ */ #include <linux/usb/langwell_udc.h> -#include <linux/usb/langwell_otg.h> /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index c7f291a..85ea14e 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -598,16 +598,16 @@ static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = { | USB_5GBPS_OPERATION), .bFunctionalitySupport = USB_LOW_SPEED_OPERATION, .bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT, - .bU2DevExitLat = USB_DEFAULT_U2_DEV_EXIT_LAT, + .bU2DevExitLat = cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT), }; static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = { .bLength = USB_DT_BOS_SIZE, .bDescriptorType = USB_DT_BOS, - .wTotalLength = USB_DT_BOS_SIZE + .wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE + USB_DT_USB_EXT_CAP_SIZE - + USB_DT_USB_SS_CAP_SIZE, + + USB_DT_USB_SS_CAP_SIZE), .bNumDeviceCaps = 2, }; diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index e90344a..b556a72 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -125,7 +125,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, */ if (pdata->init && pdata->init(pdev)) { retval = -ENODEV; - goto err3; + goto err4; } /* Enable USB controller, 83xx or 8536 */ diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index f4b627d..01bb7241d 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -276,6 +276,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd) /* Serial Bus Release Number is at PCI 0x60 offset */ pci_read_config_byte(pdev, 0x60, &ehci->sbrn); + if (pdev->vendor == PCI_VENDOR_ID_STMICRO + && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST) + ehci->sbrn = 0x20; /* ConneXT has no sbrn register */ /* Keep this around for a while just in case some EHCI * implementation uses legacy PCI PM support. This test @@ -526,6 +529,9 @@ static const struct pci_device_id pci_ids [] = { { /* handle any USB 2.0 EHCI controller */ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0), .driver_data = (unsigned long) &ehci_pci_hc_driver, + }, { + PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST), + .driver_data = (unsigned long) &ehci_pci_hc_driver, }, { /* end: all zeroes */ } }; diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 5df0b0e..77afabc 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -139,8 +139,23 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, } iclk = clk_get(&pdev->dev, "ohci_clk"); + if (IS_ERR(iclk)) { + dev_err(&pdev->dev, "failed to get ohci_clk\n"); + retval = PTR_ERR(iclk); + goto err3; + } fclk = clk_get(&pdev->dev, "uhpck"); + if (IS_ERR(fclk)) { + dev_err(&pdev->dev, "failed to get uhpck\n"); + retval = PTR_ERR(fclk); + goto err4; + } hclk = clk_get(&pdev->dev, "hclk"); + if (IS_ERR(hclk)) { + dev_err(&pdev->dev, "failed to get hclk\n"); + retval = PTR_ERR(hclk); + goto err5; + } at91_start_hc(pdev); ohci_hcd_init(hcd_to_ohci(hcd)); @@ -153,9 +168,12 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, at91_stop_hc(pdev); clk_put(hclk); + err5: clk_put(fclk); + err4: clk_put(iclk); + err3: iounmap(hcd->regs); err2: @@ -226,7 +244,8 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int if (!gpio_is_valid(pdata->vbus_pin[port])) return; - gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable); + gpio_set_value(pdata->vbus_pin[port], + !pdata->vbus_pin_active_low[port] ^ enable); } static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) @@ -237,7 +256,8 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) if (!gpio_is_valid(pdata->vbus_pin[port])) return -EINVAL; - return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted; + return gpio_get_value(pdata->vbus_pin[port]) ^ + !pdata->vbus_pin_active_low[port]; } /* diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 5179fcd..e4bcb62 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -82,6 +82,14 @@ urb_print(struct urb * urb, char * str, int small, int status) ohci_dbg(ohci,format, ## arg ); \ } while (0); +/* Version for use where "next" is the address of a local variable */ +#define ohci_dbg_nosw(ohci, next, size, format, arg...) \ + do { \ + unsigned s_len; \ + s_len = scnprintf(*next, *size, format, ## arg); \ + *size -= s_len; *next += s_len; \ + } while (0); + static void ohci_dump_intr_mask ( struct ohci_hcd *ohci, @@ -653,7 +661,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) /* dump driver info, then registers in spec order */ - ohci_dbg_sw (ohci, &next, &size, + ohci_dbg_nosw(ohci, &next, &size, "bus %s, device %s\n" "%s\n" "%s\n", @@ -672,7 +680,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) /* hcca */ if (ohci->hcca) - ohci_dbg_sw (ohci, &next, &size, + ohci_dbg_nosw(ohci, &next, &size, "hcca frame 0x%04x\n", ohci_frame_no(ohci)); /* other registers mostly affect frame timings */ diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 6109810..1843bb6 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -397,6 +397,10 @@ static const struct pci_device_id pci_ids [] = { { /* handle any USB OHCI controller */ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0), .driver_data = (unsigned long) &ohci_pci_hc_driver, + }, { + /* The device in the ConneXT I/O hub has no class reg */ + PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI), + .driver_data = (unsigned long) &ohci_pci_hc_driver, }, { /* end: all zeroes */ } }; MODULE_DEVICE_TABLE (pci, pci_ids); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b90e138..b62037b 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1204,6 +1204,7 @@ static void handle_vendor_event(struct xhci_hcd *xhci, * * Returns a zero-based port number, which is suitable for indexing into each of * the split roothubs' port arrays and bus state arrays. + * Add one to it in order to call xhci_find_slot_id_by_port. */ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd, struct xhci_hcd *xhci, u32 port_id) @@ -1324,7 +1325,7 @@ static void handle_port_status(struct xhci_hcd *xhci, xhci_set_link_state(xhci, port_array, faked_port_index, XDEV_U0); slot_id = xhci_find_slot_id_by_port(hcd, xhci, - faked_port_index); + faked_port_index + 1); if (!slot_id) { xhci_dbg(xhci, "slot_id is zero\n"); goto cleanup; @@ -3323,7 +3324,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* Check TD length */ if (running_total != td_len) { xhci_err(xhci, "ISOC TD length unmatch\n"); - return -EINVAL; + ret = -EINVAL; + goto cleanup; } } diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c index d9b6a03..da97dce 100644 --- a/drivers/usb/misc/emi26.c +++ b/drivers/usb/misc/emi26.c @@ -37,9 +37,6 @@ static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit); static int emi26_load_firmware (struct usb_device *dev); static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id); static void emi26_disconnect(struct usb_interface *intf); -static int __init emi26_init (void); -static void __exit emi26_exit (void); - /* thanks to drivers/usb/serial/keyspan_pda.c code */ static int emi26_writememory (struct usb_device *dev, int address, diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 9f39062..4e0f167 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -46,9 +46,6 @@ static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit); static int emi62_load_firmware (struct usb_device *dev); static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id); static void emi62_disconnect(struct usb_interface *intf); -static int __init emi62_init (void); -static void __exit emi62_exit (void); - /* thanks to drivers/usb/serial/keyspan_pda.c code */ static int emi62_writememory(struct usb_device *dev, int address, diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c index 107bf13..b2d82b9 100644 --- a/drivers/usb/misc/usbsevseg.c +++ b/drivers/usb/misc/usbsevseg.c @@ -24,7 +24,7 @@ #define VENDOR_ID 0x0fc5 #define PRODUCT_ID 0x1227 -#define MAXLEN 6 +#define MAXLEN 8 /* table of devices that work with this driver */ static const struct usb_device_id id_table[] = { diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index f9a3f62..7c569f5 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -33,9 +33,6 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/memory.h> -#include <asm/gpio.h> #include <mach/cputype.h> #include <asm/mach-types.h> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 56cf024..3d11cf64 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -981,6 +981,9 @@ static void musb_shutdown(struct platform_device *pdev) unsigned long flags; pm_runtime_get_sync(musb->controller); + + musb_gadget_cleanup(musb); + spin_lock_irqsave(&musb->lock, flags); musb_platform_disable(musb); musb_generic_disable(musb); @@ -1827,8 +1830,6 @@ static void musb_free(struct musb *musb) sysfs_remove_group(&musb->controller->kobj, &musb_attr_group); #endif - musb_gadget_cleanup(musb); - if (musb->nIrq >= 0) { if (musb->irq_wake) disable_irq_wake(musb->nIrq); diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index c27bbbf..df719ea 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -222,7 +222,6 @@ static inline void omap2430_low_level_init(struct musb *musb) musb_writel(musb->mregs, OTG_FORCESTDBY, l); } -/* blocking notifier support */ static int musb_otg_notifications(struct notifier_block *nb, unsigned long event, void *unused) { @@ -231,7 +230,7 @@ static int musb_otg_notifications(struct notifier_block *nb, musb->xceiv_event = event; schedule_work(&musb->otg_notifier_work); - return 0; + return NOTIFY_OK; } static void musb_otg_notifier_work(struct work_struct *data_notifier_work) @@ -386,6 +385,7 @@ static void omap2430_musb_disable(struct musb *musb) static int omap2430_musb_exit(struct musb *musb) { del_timer_sync(&musb_idle_timer); + cancel_work_sync(&musb->otg_notifier_work); omap2430_low_level_exit(musb); otg_put_transceiver(musb->xceiv); diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 2a25955..76d6293 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -86,20 +86,6 @@ config NOP_USB_XCEIV built-in with usb ip or which are autonomous and doesn't require any phy programming such as ISP1x04 etc. -config USB_LANGWELL_OTG - tristate "Intel Langwell USB OTG dual-role support" - depends on USB && PCI && INTEL_SCU_IPC - select USB_OTG - select USB_OTG_UTILS - help - Say Y here if you want to build Intel Langwell USB OTG - transciever driver in kernel. This driver implements role - switch between EHCI host driver and Langwell USB OTG - client driver. - - To compile this driver as a module, choose M here: the - module will be called langwell_otg. - config USB_MSM_OTG tristate "OTG support for Qualcomm on-chip USB controller" depends on (USB || USB_GADGET) && ARCH_MSM @@ -124,7 +110,7 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 + depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND select USB_OTG select USB_OTG_UTILS help @@ -132,7 +118,7 @@ config FSL_USB2_OTG config USB_MV_OTG tristate "Marvell USB OTG support" - depends on USB_MV_UDC + depends on USB_MV_UDC && USB_SUSPEND select USB_OTG select USB_OTG_UTILS help diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile index b2c5a95..41aa509 100644 --- a/drivers/usb/otg/Makefile +++ b/drivers/usb/otg/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o obj-$(CONFIG_TWL6030_USB) += twl6030-usb.o -obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o obj-$(CONFIG_USB_ULPI) += ulpi.o obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c deleted file mode 100644 index f08f784..0000000 --- a/drivers/usb/otg/langwell_otg.c +++ /dev/null @@ -1,2347 +0,0 @@ -/* - * Intel Langwell USB OTG transceiver driver - * Copyright (C) 2008 - 2010, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ -/* This driver helps to switch Langwell OTG controller function between host - * and peripheral. It works with EHCI driver and Langwell client controller - * driver together. - */ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/moduleparam.h> -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> -#include <linux/usb.h> -#include <linux/usb/otg.h> -#include <linux/usb/hcd.h> -#include <linux/notifier.h> -#include <linux/delay.h> -#include <asm/intel_scu_ipc.h> - -#include <linux/usb/langwell_otg.h> - -#define DRIVER_DESC "Intel Langwell USB OTG transceiver driver" -#define DRIVER_VERSION "July 10, 2010" - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>"); -MODULE_VERSION(DRIVER_VERSION); -MODULE_LICENSE("GPL"); - -static const char driver_name[] = "langwell_otg"; - -static int langwell_otg_probe(struct pci_dev *pdev, - const struct pci_device_id *id); -static void langwell_otg_remove(struct pci_dev *pdev); -static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message); -static int langwell_otg_resume(struct pci_dev *pdev); - -static int langwell_otg_set_host(struct otg_transceiver *otg, - struct usb_bus *host); -static int langwell_otg_set_peripheral(struct otg_transceiver *otg, - struct usb_gadget *gadget); -static int langwell_otg_start_srp(struct otg_transceiver *otg); - -static const struct pci_device_id pci_ids[] = {{ - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, - .vendor = 0x8086, - .device = 0x0811, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, -}, { /* end: all zeroes */ } -}; - -static struct pci_driver otg_pci_driver = { - .name = (char *) driver_name, - .id_table = pci_ids, - - .probe = langwell_otg_probe, - .remove = langwell_otg_remove, - - .suspend = langwell_otg_suspend, - .resume = langwell_otg_resume, -}; - -/* HSM timers */ -static inline struct langwell_otg_timer *otg_timer_initializer -(void (*function)(unsigned long), unsigned long expires, unsigned long data) -{ - struct langwell_otg_timer *timer; - timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL); - if (timer == NULL) - return timer; - - timer->function = function; - timer->expires = expires; - timer->data = data; - return timer; -} - -static struct langwell_otg_timer *a_wait_vrise_tmr, *a_aidl_bdis_tmr, - *b_se0_srp_tmr, *b_srp_init_tmr; - -static struct list_head active_timers; - -static struct langwell_otg *the_transceiver; - -/* host/client notify transceiver when event affects HNP state */ -void langwell_update_transceiver(void) -{ - struct langwell_otg *lnw = the_transceiver; - - dev_dbg(lnw->dev, "transceiver is updated\n"); - - if (!lnw->qwork) - return ; - - queue_work(lnw->qwork, &lnw->work); -} -EXPORT_SYMBOL(langwell_update_transceiver); - -static int langwell_otg_set_host(struct otg_transceiver *otg, - struct usb_bus *host) -{ - otg->host = host; - - return 0; -} - -static int langwell_otg_set_peripheral(struct otg_transceiver *otg, - struct usb_gadget *gadget) -{ - otg->gadget = gadget; - - return 0; -} - -static int langwell_otg_set_power(struct otg_transceiver *otg, - unsigned mA) -{ - return 0; -} - -/* A-device drives vbus, controlled through IPC commands */ -static int langwell_otg_set_vbus(struct otg_transceiver *otg, bool enabled) -{ - struct langwell_otg *lnw = the_transceiver; - u8 sub_id; - - dev_dbg(lnw->dev, "%s <--- %s\n", __func__, enabled ? "on" : "off"); - - if (enabled) - sub_id = 0x8; /* Turn on the VBus */ - else - sub_id = 0x9; /* Turn off the VBus */ - - if (intel_scu_ipc_simple_command(0xef, sub_id)) { - dev_dbg(lnw->dev, "Failed to set Vbus via IPC commands\n"); - return -EBUSY; - } - - dev_dbg(lnw->dev, "%s --->\n", __func__); - - return 0; -} - -/* charge vbus or discharge vbus through a resistor to ground */ -static void langwell_otg_chrg_vbus(int on) -{ - struct langwell_otg *lnw = the_transceiver; - u32 val; - - val = readl(lnw->iotg.base + CI_OTGSC); - - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC, - lnw->iotg.base + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD, - lnw->iotg.base + CI_OTGSC); -} - -/* Start SRP */ -static int langwell_otg_start_srp(struct otg_transceiver *otg) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s --->\n", __func__); - - val = readl(iotg->base + CI_OTGSC); - - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP, - iotg->base + CI_OTGSC); - - /* Check if the data plus is finished or not */ - msleep(8); - val = readl(iotg->base + CI_OTGSC); - if (val & (OTGSC_HADP | OTGSC_DP)) - dev_dbg(lnw->dev, "DataLine SRP Error\n"); - - /* Disable interrupt - b_sess_vld */ - val = readl(iotg->base + CI_OTGSC); - val &= (~(OTGSC_BSVIE | OTGSC_BSEIE)); - writel(val, iotg->base + CI_OTGSC); - - /* Start VBus SRP, drive vbus to generate VBus pulse */ - iotg->otg.set_vbus(&iotg->otg, true); - msleep(15); - iotg->otg.set_vbus(&iotg->otg, false); - - /* Enable interrupt - b_sess_vld*/ - val = readl(iotg->base + CI_OTGSC); - dev_dbg(lnw->dev, "after VBUS pulse otgsc = %x\n", val); - - val |= (OTGSC_BSVIE | OTGSC_BSEIE); - writel(val, iotg->base + CI_OTGSC); - - /* If Vbus is valid, then update the hsm */ - if (val & OTGSC_BSV) { - dev_dbg(lnw->dev, "no b_sess_vld interrupt\n"); - - lnw->iotg.hsm.b_sess_vld = 1; - langwell_update_transceiver(); - } - - dev_dbg(lnw->dev, "%s <---\n", __func__); - return 0; -} - -/* stop SOF via bus_suspend */ -static void langwell_otg_loc_sof(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct usb_hcd *hcd; - int err; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "suspend" : "resume"); - - hcd = bus_to_hcd(lnw->iotg.otg.host); - if (on) - err = hcd->driver->bus_resume(hcd); - else - err = hcd->driver->bus_suspend(hcd); - - if (err) - dev_dbg(lnw->dev, "Fail to resume/suspend USB bus - %d\n", err); - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -static int langwell_otg_check_otgsc(void) -{ - struct langwell_otg *lnw = the_transceiver; - u32 otgsc, usbcfg; - - dev_dbg(lnw->dev, "check sync OTGSC and USBCFG registers\n"); - - otgsc = readl(lnw->iotg.base + CI_OTGSC); - usbcfg = readl(lnw->usbcfg); - - dev_dbg(lnw->dev, "OTGSC = %08x, USBCFG = %08x\n", - otgsc, usbcfg); - dev_dbg(lnw->dev, "OTGSC_AVV = %d\n", !!(otgsc & OTGSC_AVV)); - dev_dbg(lnw->dev, "USBCFG.VBUSVAL = %d\n", - !!(usbcfg & USBCFG_VBUSVAL)); - dev_dbg(lnw->dev, "OTGSC_ASV = %d\n", !!(otgsc & OTGSC_ASV)); - dev_dbg(lnw->dev, "USBCFG.AVALID = %d\n", - !!(usbcfg & USBCFG_AVALID)); - dev_dbg(lnw->dev, "OTGSC_BSV = %d\n", !!(otgsc & OTGSC_BSV)); - dev_dbg(lnw->dev, "USBCFG.BVALID = %d\n", - !!(usbcfg & USBCFG_BVALID)); - dev_dbg(lnw->dev, "OTGSC_BSE = %d\n", !!(otgsc & OTGSC_BSE)); - dev_dbg(lnw->dev, "USBCFG.SESEND = %d\n", - !!(usbcfg & USBCFG_SESEND)); - - /* Check USBCFG VBusValid/AValid/BValid/SessEnd */ - if (!!(otgsc & OTGSC_AVV) ^ !!(usbcfg & USBCFG_VBUSVAL)) { - dev_dbg(lnw->dev, "OTGSC.AVV != USBCFG.VBUSVAL\n"); - goto err; - } - if (!!(otgsc & OTGSC_ASV) ^ !!(usbcfg & USBCFG_AVALID)) { - dev_dbg(lnw->dev, "OTGSC.ASV != USBCFG.AVALID\n"); - goto err; - } - if (!!(otgsc & OTGSC_BSV) ^ !!(usbcfg & USBCFG_BVALID)) { - dev_dbg(lnw->dev, "OTGSC.BSV != USBCFG.BVALID\n"); - goto err; - } - if (!!(otgsc & OTGSC_BSE) ^ !!(usbcfg & USBCFG_SESEND)) { - dev_dbg(lnw->dev, "OTGSC.BSE != USBCFG.SESSEN\n"); - goto err; - } - - dev_dbg(lnw->dev, "OTGSC and USBCFG are synced\n"); - - return 0; - -err: - dev_warn(lnw->dev, "OTGSC isn't equal to USBCFG\n"); - return -EPIPE; -} - - -static void langwell_otg_phy_low_power(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u8 val, phcd; - int retval; - - dev_dbg(lnw->dev, "%s ---> %s mode\n", - __func__, on ? "Low power" : "Normal"); - - phcd = 0x40; - - val = readb(iotg->base + CI_HOSTPC1 + 2); - - if (on) { - /* Due to hardware issue, after set PHCD, sync will failed - * between USBCFG and OTGSC, so before set PHCD, check if - * sync is in process now. If the answer is "yes", then do - * not touch PHCD bit */ - retval = langwell_otg_check_otgsc(); - if (retval) { - dev_dbg(lnw->dev, "Skip PHCD programming..\n"); - return ; - } - - writeb(val | phcd, iotg->base + CI_HOSTPC1 + 2); - } else - writeb(val & ~phcd, iotg->base + CI_HOSTPC1 + 2); - - dev_dbg(lnw->dev, "%s <--- done\n", __func__); -} - -/* After drv vbus, add 5 ms delay to set PHCD */ -static void langwell_otg_phy_low_power_wait(int on) -{ - struct langwell_otg *lnw = the_transceiver; - - dev_dbg(lnw->dev, "add 5ms delay before programing PHCD\n"); - - mdelay(5); - langwell_otg_phy_low_power(on); -} - -/* Enable/Disable OTG interrupt */ -static void langwell_otg_intr(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off"); - - val = readl(iotg->base + CI_OTGSC); - - /* OTGSC_INT_MASK doesn't contains 1msInt */ - if (on) { - val = val | (OTGSC_INT_MASK); - writel(val, iotg->base + CI_OTGSC); - } else { - val = val & ~(OTGSC_INT_MASK); - writel(val, iotg->base + CI_OTGSC); - } - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -/* set HAAR: Hardware Assist Auto-Reset */ -static void langwell_otg_HAAR(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off"); - - val = readl(iotg->base + CI_OTGSC); - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR, - iotg->base + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR, - iotg->base + CI_OTGSC); - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -/* set HABA: Hardware Assist B-Disconnect to A-Connect */ -static void langwell_otg_HABA(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off"); - - val = readl(iotg->base + CI_OTGSC); - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA, - iotg->base + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA, - iotg->base + CI_OTGSC); - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -static int langwell_otg_check_se0_srp(int on) -{ - struct langwell_otg *lnw = the_transceiver; - int delay_time = TB_SE0_SRP * 10; - u32 val; - - dev_dbg(lnw->dev, "%s --->\n", __func__); - - do { - udelay(100); - if (!delay_time--) - break; - val = readl(lnw->iotg.base + CI_PORTSC1); - val &= PORTSC_LS; - } while (!val); - - dev_dbg(lnw->dev, "%s <---\n", __func__); - return val; -} - -/* The timeout callback function to set time out bit */ -static void set_tmout(unsigned long indicator) -{ - *(int *)indicator = 1; -} - -void langwell_otg_nsf_msg(unsigned long indicator) -{ - struct langwell_otg *lnw = the_transceiver; - - switch (indicator) { - case 2: - case 4: - case 6: - case 7: - dev_warn(lnw->dev, - "OTG:NSF-%lu - deivce not responding\n", indicator); - break; - case 3: - dev_warn(lnw->dev, - "OTG:NSF-%lu - deivce not supported\n", indicator); - break; - default: - dev_warn(lnw->dev, "Do not have this kind of NSF\n"); - break; - } -} - -/* Initialize timers */ -static int langwell_otg_init_timers(struct otg_hsm *hsm) -{ - /* HSM used timers */ - a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE, - (unsigned long)&hsm->a_wait_vrise_tmout); - if (a_wait_vrise_tmr == NULL) - return -ENOMEM; - a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS, - (unsigned long)&hsm->a_aidl_bdis_tmout); - if (a_aidl_bdis_tmr == NULL) - return -ENOMEM; - b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP, - (unsigned long)&hsm->b_se0_srp); - if (b_se0_srp_tmr == NULL) - return -ENOMEM; - b_srp_init_tmr = otg_timer_initializer(&set_tmout, TB_SRP_INIT, - (unsigned long)&hsm->b_srp_init_tmout); - if (b_srp_init_tmr == NULL) - return -ENOMEM; - - return 0; -} - -/* Free timers */ -static void langwell_otg_free_timers(void) -{ - kfree(a_wait_vrise_tmr); - kfree(a_aidl_bdis_tmr); - kfree(b_se0_srp_tmr); - kfree(b_srp_init_tmr); -} - -/* The timeout callback function to set time out bit */ -static void langwell_otg_timer_fn(unsigned long indicator) -{ - struct langwell_otg *lnw = the_transceiver; - - *(int *)indicator = 1; - - dev_dbg(lnw->dev, "kernel timer - timeout\n"); - - langwell_update_transceiver(); -} - -/* kernel timer used instead of HW based interrupt */ -static void langwell_otg_add_ktimer(enum langwell_otg_timer_type timers) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - unsigned long j = jiffies; - unsigned long data, time; - - switch (timers) { - case TA_WAIT_VRISE_TMR: - iotg->hsm.a_wait_vrise_tmout = 0; - data = (unsigned long)&iotg->hsm.a_wait_vrise_tmout; - time = TA_WAIT_VRISE; - break; - case TA_WAIT_BCON_TMR: - iotg->hsm.a_wait_bcon_tmout = 0; - data = (unsigned long)&iotg->hsm.a_wait_bcon_tmout; - time = TA_WAIT_BCON; - break; - case TA_AIDL_BDIS_TMR: - iotg->hsm.a_aidl_bdis_tmout = 0; - data = (unsigned long)&iotg->hsm.a_aidl_bdis_tmout; - time = TA_AIDL_BDIS; - break; - case TB_ASE0_BRST_TMR: - iotg->hsm.b_ase0_brst_tmout = 0; - data = (unsigned long)&iotg->hsm.b_ase0_brst_tmout; - time = TB_ASE0_BRST; - break; - case TB_SRP_INIT_TMR: - iotg->hsm.b_srp_init_tmout = 0; - data = (unsigned long)&iotg->hsm.b_srp_init_tmout; - time = TB_SRP_INIT; - break; - case TB_SRP_FAIL_TMR: - iotg->hsm.b_srp_fail_tmout = 0; - data = (unsigned long)&iotg->hsm.b_srp_fail_tmout; - time = TB_SRP_FAIL; - break; - case TB_BUS_SUSPEND_TMR: - iotg->hsm.b_bus_suspend_tmout = 0; - data = (unsigned long)&iotg->hsm.b_bus_suspend_tmout; - time = TB_BUS_SUSPEND; - break; - default: - dev_dbg(lnw->dev, "unknown timer, cannot enable it\n"); - return; - } - - lnw->hsm_timer.data = data; - lnw->hsm_timer.function = langwell_otg_timer_fn; - lnw->hsm_timer.expires = j + time * HZ / 1000; /* milliseconds */ - - add_timer(&lnw->hsm_timer); - - dev_dbg(lnw->dev, "add timer successfully\n"); -} - -/* Add timer to timer list */ -static void langwell_otg_add_timer(void *gtimer) -{ - struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer; - struct langwell_otg_timer *tmp_timer; - struct intel_mid_otg_xceiv *iotg = &the_transceiver->iotg; - u32 val32; - - /* Check if the timer is already in the active list, - * if so update timer count - */ - list_for_each_entry(tmp_timer, &active_timers, list) - if (tmp_timer == timer) { - timer->count = timer->expires; - return; - } - timer->count = timer->expires; - - if (list_empty(&active_timers)) { - val32 = readl(iotg->base + CI_OTGSC); - writel(val32 | OTGSC_1MSE, iotg->base + CI_OTGSC); - } - - list_add_tail(&timer->list, &active_timers); -} - -/* Remove timer from the timer list; clear timeout status */ -static void langwell_otg_del_timer(void *gtimer) -{ - struct langwell_otg *lnw = the_transceiver; - struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer; - struct langwell_otg_timer *tmp_timer, *del_tmp; - u32 val32; - - list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) - if (tmp_timer == timer) - list_del(&timer->list); - - if (list_empty(&active_timers)) { - val32 = readl(lnw->iotg.base + CI_OTGSC); - writel(val32 & ~OTGSC_1MSE, lnw->iotg.base + CI_OTGSC); - } -} - -/* Reduce timer count by 1, and find timeout conditions.*/ -static int langwell_otg_tick_timer(u32 *int_sts) -{ - struct langwell_otg *lnw = the_transceiver; - struct langwell_otg_timer *tmp_timer, *del_tmp; - int expired = 0; - - list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) { - tmp_timer->count--; - /* check if timer expires */ - if (!tmp_timer->count) { - list_del(&tmp_timer->list); - tmp_timer->function(tmp_timer->data); - expired = 1; - } - } - - if (list_empty(&active_timers)) { - dev_dbg(lnw->dev, "tick timer: disable 1ms int\n"); - *int_sts = *int_sts & ~OTGSC_1MSE; - } - return expired; -} - -static void reset_otg(void) -{ - struct langwell_otg *lnw = the_transceiver; - int delay_time = 1000; - u32 val; - - dev_dbg(lnw->dev, "reseting OTG controller ...\n"); - val = readl(lnw->iotg.base + CI_USBCMD); - writel(val | USBCMD_RST, lnw->iotg.base + CI_USBCMD); - do { - udelay(100); - if (!delay_time--) - dev_dbg(lnw->dev, "reset timeout\n"); - val = readl(lnw->iotg.base + CI_USBCMD); - val &= USBCMD_RST; - } while (val != 0); - dev_dbg(lnw->dev, "reset done.\n"); -} - -static void set_host_mode(void) -{ - struct langwell_otg *lnw = the_transceiver; - u32 val; - - reset_otg(); - val = readl(lnw->iotg.base + CI_USBMODE); - val = (val & (~USBMODE_CM)) | USBMODE_HOST; - writel(val, lnw->iotg.base + CI_USBMODE); -} - -static void set_client_mode(void) -{ - struct langwell_otg *lnw = the_transceiver; - u32 val; - - reset_otg(); - val = readl(lnw->iotg.base + CI_USBMODE); - val = (val & (~USBMODE_CM)) | USBMODE_DEVICE; - writel(val, lnw->iotg.base + CI_USBMODE); -} - -static void init_hsm(void) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val32; - - /* read OTGSC after reset */ - val32 = readl(lnw->iotg.base + CI_OTGSC); - dev_dbg(lnw->dev, "%s: OTGSC init value = 0x%x\n", __func__, val32); - - /* set init state */ - if (val32 & OTGSC_ID) { - iotg->hsm.id = 1; - iotg->otg.default_a = 0; - set_client_mode(); - iotg->otg.state = OTG_STATE_B_IDLE; - } else { - iotg->hsm.id = 0; - iotg->otg.default_a = 1; - set_host_mode(); - iotg->otg.state = OTG_STATE_A_IDLE; - } - - /* set session indicator */ - if (val32 & OTGSC_BSE) - iotg->hsm.b_sess_end = 1; - if (val32 & OTGSC_BSV) - iotg->hsm.b_sess_vld = 1; - if (val32 & OTGSC_ASV) - iotg->hsm.a_sess_vld = 1; - if (val32 & OTGSC_AVV) - iotg->hsm.a_vbus_vld = 1; - - /* defautly power the bus */ - iotg->hsm.a_bus_req = 1; - iotg->hsm.a_bus_drop = 0; - /* defautly don't request bus as B device */ - iotg->hsm.b_bus_req = 0; - /* no system error */ - iotg->hsm.a_clr_err = 0; - - langwell_otg_phy_low_power_wait(1); -} - -static void update_hsm(void) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val32; - - /* read OTGSC */ - val32 = readl(lnw->iotg.base + CI_OTGSC); - dev_dbg(lnw->dev, "%s: OTGSC value = 0x%x\n", __func__, val32); - - iotg->hsm.id = !!(val32 & OTGSC_ID); - iotg->hsm.b_sess_end = !!(val32 & OTGSC_BSE); - iotg->hsm.b_sess_vld = !!(val32 & OTGSC_BSV); - iotg->hsm.a_sess_vld = !!(val32 & OTGSC_ASV); - iotg->hsm.a_vbus_vld = !!(val32 & OTGSC_AVV); -} - -static irqreturn_t otg_dummy_irq(int irq, void *_dev) -{ - struct langwell_otg *lnw = the_transceiver; - void __iomem *reg_base = _dev; - u32 val; - u32 int_mask = 0; - - val = readl(reg_base + CI_USBMODE); - if ((val & USBMODE_CM) != USBMODE_DEVICE) - return IRQ_NONE; - - val = readl(reg_base + CI_USBSTS); - int_mask = val & INTR_DUMMY_MASK; - - if (int_mask == 0) - return IRQ_NONE; - - /* clear hsm.b_conn here since host driver can't detect it - * otg_dummy_irq called means B-disconnect happened. - */ - if (lnw->iotg.hsm.b_conn) { - lnw->iotg.hsm.b_conn = 0; - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - } - - /* Clear interrupts */ - writel(int_mask, reg_base + CI_USBSTS); - return IRQ_HANDLED; -} - -static irqreturn_t otg_irq(int irq, void *_dev) -{ - struct langwell_otg *lnw = _dev; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 int_sts, int_en; - u32 int_mask = 0; - int flag = 0; - - int_sts = readl(lnw->iotg.base + CI_OTGSC); - int_en = (int_sts & OTGSC_INTEN_MASK) >> 8; - int_mask = int_sts & int_en; - if (int_mask == 0) - return IRQ_NONE; - - if (int_mask & OTGSC_IDIS) { - dev_dbg(lnw->dev, "%s: id change int\n", __func__); - iotg->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0; - dev_dbg(lnw->dev, "id = %d\n", iotg->hsm.id); - flag = 1; - } - if (int_mask & OTGSC_DPIS) { - dev_dbg(lnw->dev, "%s: data pulse int\n", __func__); - iotg->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0; - dev_dbg(lnw->dev, "data pulse = %d\n", iotg->hsm.a_srp_det); - flag = 1; - } - if (int_mask & OTGSC_BSEIS) { - dev_dbg(lnw->dev, "%s: b session end int\n", __func__); - iotg->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0; - dev_dbg(lnw->dev, "b_sess_end = %d\n", iotg->hsm.b_sess_end); - flag = 1; - } - if (int_mask & OTGSC_BSVIS) { - dev_dbg(lnw->dev, "%s: b session valid int\n", __func__); - iotg->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0; - dev_dbg(lnw->dev, "b_sess_vld = %d\n", iotg->hsm.b_sess_end); - flag = 1; - } - if (int_mask & OTGSC_ASVIS) { - dev_dbg(lnw->dev, "%s: a session valid int\n", __func__); - iotg->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0; - dev_dbg(lnw->dev, "a_sess_vld = %d\n", iotg->hsm.a_sess_vld); - flag = 1; - } - if (int_mask & OTGSC_AVVIS) { - dev_dbg(lnw->dev, "%s: a vbus valid int\n", __func__); - iotg->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0; - dev_dbg(lnw->dev, "a_vbus_vld = %d\n", iotg->hsm.a_vbus_vld); - flag = 1; - } - - if (int_mask & OTGSC_1MSS) { - /* need to schedule otg_work if any timer is expired */ - if (langwell_otg_tick_timer(&int_sts)) - flag = 1; - } - - writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask, - lnw->iotg.base + CI_OTGSC); - if (flag) - langwell_update_transceiver(); - - return IRQ_HANDLED; -} - -static int langwell_otg_iotg_notify(struct notifier_block *nb, - unsigned long action, void *data) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = data; - int flag = 0; - - if (iotg == NULL) - return NOTIFY_BAD; - - if (lnw == NULL) - return NOTIFY_BAD; - - switch (action) { - case MID_OTG_NOTIFY_CONNECT: - dev_dbg(lnw->dev, "Lnw OTG Notify Connect Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.b_conn = 1; - else - iotg->hsm.a_conn = 1; - flag = 1; - break; - case MID_OTG_NOTIFY_DISCONN: - dev_dbg(lnw->dev, "Lnw OTG Notify Disconnect Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.b_conn = 0; - else - iotg->hsm.a_conn = 0; - flag = 1; - break; - case MID_OTG_NOTIFY_HSUSPEND: - dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus suspend Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.a_suspend_req = 1; - else - iotg->hsm.b_bus_req = 0; - flag = 1; - break; - case MID_OTG_NOTIFY_HRESUME: - dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus resume Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.b_bus_resume = 1; - flag = 1; - break; - case MID_OTG_NOTIFY_CSUSPEND: - dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus suspend Event\n"); - if (iotg->otg.default_a == 1) { - if (iotg->hsm.b_bus_suspend_vld == 2) { - iotg->hsm.b_bus_suspend = 1; - iotg->hsm.b_bus_suspend_vld = 0; - flag = 1; - } else { - iotg->hsm.b_bus_suspend_vld++; - flag = 0; - } - } else { - if (iotg->hsm.a_bus_suspend == 0) { - iotg->hsm.a_bus_suspend = 1; - flag = 1; - } - } - break; - case MID_OTG_NOTIFY_CRESUME: - dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus resume Event\n"); - if (iotg->otg.default_a == 0) - iotg->hsm.a_bus_suspend = 0; - flag = 0; - break; - case MID_OTG_NOTIFY_HOSTADD: - dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver Add\n"); - flag = 1; - break; - case MID_OTG_NOTIFY_HOSTREMOVE: - dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver remove\n"); - flag = 1; - break; - case MID_OTG_NOTIFY_CLIENTADD: - dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver Add\n"); - flag = 1; - break; - case MID_OTG_NOTIFY_CLIENTREMOVE: - dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver remove\n"); - flag = 1; - break; - default: - dev_dbg(lnw->dev, "Lnw OTG Nofity unknown notify message\n"); - return NOTIFY_DONE; - } - - if (flag) - langwell_update_transceiver(); - - return NOTIFY_OK; -} - -static void langwell_otg_work(struct work_struct *work) -{ - struct langwell_otg *lnw; - struct intel_mid_otg_xceiv *iotg; - int retval; - struct pci_dev *pdev; - - lnw = container_of(work, struct langwell_otg, work); - iotg = &lnw->iotg; - pdev = to_pci_dev(lnw->dev); - - dev_dbg(lnw->dev, "%s: old state = %s\n", __func__, - otg_state_string(iotg->otg.state)); - - switch (iotg->otg.state) { - case OTG_STATE_UNDEFINED: - case OTG_STATE_B_IDLE: - if (!iotg->hsm.id) { - langwell_otg_del_timer(b_srp_init_tmr); - del_timer_sync(&lnw->hsm_timer); - - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - set_host_mode(); - langwell_otg_phy_low_power(1); - - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.b_sess_vld) { - langwell_otg_del_timer(b_srp_init_tmr); - del_timer_sync(&lnw->hsm_timer); - iotg->hsm.b_sess_end = 0; - iotg->hsm.a_bus_suspend = 0; - langwell_otg_chrg_vbus(0); - - if (lnw->iotg.start_peripheral) { - lnw->iotg.start_peripheral(&lnw->iotg); - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } else - dev_dbg(lnw->dev, "client driver not loaded\n"); - - } else if (iotg->hsm.b_srp_init_tmout) { - iotg->hsm.b_srp_init_tmout = 0; - dev_warn(lnw->dev, "SRP init timeout\n"); - } else if (iotg->hsm.b_srp_fail_tmout) { - iotg->hsm.b_srp_fail_tmout = 0; - iotg->hsm.b_bus_req = 0; - - /* No silence failure */ - langwell_otg_nsf_msg(6); - } else if (iotg->hsm.b_bus_req && iotg->hsm.b_sess_end) { - del_timer_sync(&lnw->hsm_timer); - /* workaround for b_se0_srp detection */ - retval = langwell_otg_check_se0_srp(0); - if (retval) { - iotg->hsm.b_bus_req = 0; - dev_dbg(lnw->dev, "LS isn't SE0, try later\n"); - } else { - /* clear the PHCD before start srp */ - langwell_otg_phy_low_power(0); - - /* Start SRP */ - langwell_otg_add_timer(b_srp_init_tmr); - iotg->otg.start_srp(&iotg->otg); - langwell_otg_del_timer(b_srp_init_tmr); - langwell_otg_add_ktimer(TB_SRP_FAIL_TMR); - - /* reset PHY low power mode here */ - langwell_otg_phy_low_power_wait(1); - } - } - break; - case OTG_STATE_B_SRP_INIT: - if (!iotg->hsm.id) { - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_chrg_vbus(0); - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.b_sess_vld) { - langwell_otg_chrg_vbus(0); - if (lnw->iotg.start_peripheral) { - lnw->iotg.start_peripheral(&lnw->iotg); - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } else - dev_dbg(lnw->dev, "client driver not loaded\n"); - } - break; - case OTG_STATE_B_PERIPHERAL: - if (!iotg->hsm.id) { - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.b_sess_vld) { - iotg->hsm.b_hnp_enable = 0; - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - iotg->otg.state = OTG_STATE_B_IDLE; - } else if (iotg->hsm.b_bus_req && iotg->otg.gadget && - iotg->otg.gadget->b_hnp_enable && - iotg->hsm.a_bus_suspend) { - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - langwell_otg_HAAR(1); - iotg->hsm.a_conn = 0; - - if (lnw->iotg.start_host) { - lnw->iotg.start_host(&lnw->iotg); - iotg->otg.state = OTG_STATE_B_WAIT_ACON; - } else - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - - iotg->hsm.a_bus_resume = 0; - langwell_otg_add_ktimer(TB_ASE0_BRST_TMR); - } - break; - - case OTG_STATE_B_WAIT_ACON: - if (!iotg->hsm.id) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - - langwell_otg_HAAR(0); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.b_sess_vld) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->hsm.b_hnp_enable = 0; - iotg->hsm.b_bus_req = 0; - - langwell_otg_chrg_vbus(0); - langwell_otg_HAAR(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - } else if (iotg->hsm.a_conn) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - langwell_otg_HAAR(0); - iotg->otg.state = OTG_STATE_B_HOST; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_resume || - iotg->hsm.b_ase0_brst_tmout) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - langwell_otg_HAAR(0); - langwell_otg_nsf_msg(7); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - iotg->hsm.a_bus_suspend = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.start_peripheral) - lnw->iotg.start_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver not loaded.\n"); - - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } - break; - - case OTG_STATE_B_HOST: - if (!iotg->hsm.id) { - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.b_sess_vld) { - iotg->hsm.b_hnp_enable = 0; - iotg->hsm.b_bus_req = 0; - - langwell_otg_chrg_vbus(0); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - } else if ((!iotg->hsm.b_bus_req) || - (!iotg->hsm.a_conn)) { - iotg->hsm.b_bus_req = 0; - langwell_otg_loc_sof(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - iotg->hsm.a_bus_suspend = 0; - - if (lnw->iotg.start_peripheral) - lnw->iotg.start_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver not loaded.\n"); - - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } - break; - - case OTG_STATE_A_IDLE: - iotg->otg.default_a = 1; - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - iotg->hsm.vbus_srp_up = 0; - - langwell_otg_chrg_vbus(0); - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_bus_drop && - (iotg->hsm.a_srp_det || iotg->hsm.a_bus_req)) { - langwell_otg_phy_low_power(0); - - /* Turn on VBus */ - iotg->otg.set_vbus(&iotg->otg, true); - - iotg->hsm.vbus_srp_up = 0; - iotg->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - iotg->otg.state = OTG_STATE_A_WAIT_VRISE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_bus_drop && iotg->hsm.a_sess_vld) { - iotg->hsm.vbus_srp_up = 1; - } else if (!iotg->hsm.a_sess_vld && iotg->hsm.vbus_srp_up) { - msleep(10); - langwell_otg_phy_low_power(0); - - /* Turn on VBus */ - iotg->otg.set_vbus(&iotg->otg, true); - iotg->hsm.a_srp_det = 1; - iotg->hsm.vbus_srp_up = 0; - iotg->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - iotg->otg.state = OTG_STATE_A_WAIT_VRISE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_sess_vld && - !iotg->hsm.vbus_srp_up) { - langwell_otg_phy_low_power(1); - } - break; - case OTG_STATE_A_WAIT_VRISE: - if (iotg->hsm.id) { - langwell_otg_del_timer(a_wait_vrise_tmr); - iotg->hsm.b_bus_req = 0; - iotg->otg.default_a = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - } else if (iotg->hsm.a_vbus_vld) { - langwell_otg_del_timer(a_wait_vrise_tmr); - iotg->hsm.b_conn = 0; - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else { - dev_dbg(lnw->dev, "host driver not loaded.\n"); - break; - } - - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } else if (iotg->hsm.a_wait_vrise_tmout) { - iotg->hsm.b_conn = 0; - if (iotg->hsm.a_vbus_vld) { - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else { - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - break; - } - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } else { - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } - } - break; - case OTG_STATE_A_WAIT_BCON: - if (iotg->hsm.id) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_vbus_vld) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (iotg->hsm.a_bus_drop || - (iotg->hsm.a_wait_bcon_tmout && - !iotg->hsm.a_bus_req)) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (iotg->hsm.b_conn) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->hsm.a_suspend_req = 0; - iotg->otg.state = OTG_STATE_A_HOST; - if (iotg->hsm.a_srp_det && iotg->otg.host && - !iotg->otg.host->b_hnp_enable) { - /* SRP capable peripheral-only device */ - iotg->hsm.a_bus_req = 1; - iotg->hsm.a_srp_det = 0; - } else if (!iotg->hsm.a_bus_req && iotg->otg.host && - iotg->otg.host->b_hnp_enable) { - /* It is not safe enough to do a fast - * transition from A_WAIT_BCON to - * A_SUSPEND */ - msleep(10000); - if (iotg->hsm.a_bus_req) - break; - - if (request_irq(pdev->irq, - otg_dummy_irq, IRQF_SHARED, - driver_name, iotg->base) != 0) { - dev_dbg(lnw->dev, - "request interrupt %d fail\n", - pdev->irq); - } - - langwell_otg_HABA(1); - iotg->hsm.b_bus_resume = 0; - iotg->hsm.a_aidl_bdis_tmout = 0; - - langwell_otg_loc_sof(0); - /* clear PHCD to enable HW timer */ - langwell_otg_phy_low_power(0); - langwell_otg_add_timer(a_aidl_bdis_tmr); - iotg->otg.state = OTG_STATE_A_SUSPEND; - } else if (!iotg->hsm.a_bus_req && iotg->otg.host && - !iotg->otg.host->b_hnp_enable) { - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } - } - break; - case OTG_STATE_A_HOST: - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_drop || - (iotg->otg.host && - !iotg->otg.host->b_hnp_enable && - !iotg->hsm.a_bus_req)) { - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (!iotg->hsm.a_vbus_vld) { - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (iotg->otg.host && - iotg->otg.host->b_hnp_enable && - !iotg->hsm.a_bus_req) { - /* Set HABA to enable hardware assistance to signal - * A-connect after receiver B-disconnect. Hardware - * will then set client mode and enable URE, SLE and - * PCE after the assistance. otg_dummy_irq is used to - * clean these ints when client driver is not resumed. - */ - if (request_irq(pdev->irq, otg_dummy_irq, IRQF_SHARED, - driver_name, iotg->base) != 0) { - dev_dbg(lnw->dev, - "request interrupt %d failed\n", - pdev->irq); - } - - /* set HABA */ - langwell_otg_HABA(1); - iotg->hsm.b_bus_resume = 0; - iotg->hsm.a_aidl_bdis_tmout = 0; - langwell_otg_loc_sof(0); - /* clear PHCD to enable HW timer */ - langwell_otg_phy_low_power(0); - langwell_otg_add_timer(a_aidl_bdis_tmr); - iotg->otg.state = OTG_STATE_A_SUSPEND; - } else if (!iotg->hsm.b_conn || !iotg->hsm.a_bus_req) { - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } - break; - case OTG_STATE_A_SUSPEND: - if (iotg->hsm.id) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_req || - iotg->hsm.b_bus_resume) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - iotg->hsm.a_suspend_req = 0; - langwell_otg_loc_sof(1); - iotg->otg.state = OTG_STATE_A_HOST; - } else if (iotg->hsm.a_aidl_bdis_tmout || - iotg->hsm.a_bus_drop) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (!iotg->hsm.b_conn && iotg->otg.host && - iotg->otg.host->b_hnp_enable) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - iotg->hsm.b_bus_suspend = 0; - iotg->hsm.b_bus_suspend_vld = 0; - - /* msleep(200); */ - if (lnw->iotg.start_peripheral) - lnw->iotg.start_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver not loaded.\n"); - - langwell_otg_add_ktimer(TB_BUS_SUSPEND_TMR); - iotg->otg.state = OTG_STATE_A_PERIPHERAL; - break; - } else if (!iotg->hsm.a_vbus_vld) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } - break; - case OTG_STATE_A_PERIPHERAL: - if (iotg->hsm.id) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_vbus_vld) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (iotg->hsm.a_bus_drop) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (iotg->hsm.b_bus_suspend) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } else if (iotg->hsm.b_bus_suspend_tmout) { - u32 val; - val = readl(lnw->iotg.base + CI_PORTSC1); - if (!(val & PORTSC_SUSP)) - break; - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } - break; - case OTG_STATE_A_VBUS_ERR: - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - iotg->hsm.a_clr_err = 0; - iotg->hsm.a_srp_det = 0; - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_clr_err) { - iotg->hsm.a_clr_err = 0; - iotg->hsm.a_srp_det = 0; - reset_otg(); - init_hsm(); - if (iotg->otg.state == OTG_STATE_A_IDLE) - langwell_update_transceiver(); - } else { - /* FW will clear PHCD bit when any VBus - * event detected. Reset PHCD to 1 again */ - langwell_otg_phy_low_power(1); - } - break; - case OTG_STATE_A_WAIT_VFALL: - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_req) { - - /* Turn on VBus */ - iotg->otg.set_vbus(&iotg->otg, true); - iotg->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - iotg->otg.state = OTG_STATE_A_WAIT_VRISE; - } else if (!iotg->hsm.a_sess_vld) { - iotg->hsm.a_srp_det = 0; - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - } - break; - default: - ; - } - - dev_dbg(lnw->dev, "%s: new state = %s\n", __func__, - otg_state_string(iotg->otg.state)); -} - -static ssize_t -show_registers(struct device *_dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, - "\n" - "USBCMD = 0x%08x\n" - "USBSTS = 0x%08x\n" - "USBINTR = 0x%08x\n" - "ASYNCLISTADDR = 0x%08x\n" - "PORTSC1 = 0x%08x\n" - "HOSTPC1 = 0x%08x\n" - "OTGSC = 0x%08x\n" - "USBMODE = 0x%08x\n", - readl(lnw->iotg.base + 0x30), - readl(lnw->iotg.base + 0x34), - readl(lnw->iotg.base + 0x38), - readl(lnw->iotg.base + 0x48), - readl(lnw->iotg.base + 0x74), - readl(lnw->iotg.base + 0xb4), - readl(lnw->iotg.base + 0xf4), - readl(lnw->iotg.base + 0xf8) - ); - size -= t; - next += t; - - return PAGE_SIZE - size; -} -static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL); - -static ssize_t -show_hsm(struct device *_dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - if (iotg->otg.host) - iotg->hsm.a_set_b_hnp_en = iotg->otg.host->b_hnp_enable; - - if (iotg->otg.gadget) - iotg->hsm.b_hnp_enable = iotg->otg.gadget->b_hnp_enable; - - t = scnprintf(next, size, - "\n" - "current state = %s\n" - "a_bus_resume = \t%d\n" - "a_bus_suspend = \t%d\n" - "a_conn = \t%d\n" - "a_sess_vld = \t%d\n" - "a_srp_det = \t%d\n" - "a_vbus_vld = \t%d\n" - "b_bus_resume = \t%d\n" - "b_bus_suspend = \t%d\n" - "b_conn = \t%d\n" - "b_se0_srp = \t%d\n" - "b_sess_end = \t%d\n" - "b_sess_vld = \t%d\n" - "id = \t%d\n" - "a_set_b_hnp_en = \t%d\n" - "b_srp_done = \t%d\n" - "b_hnp_enable = \t%d\n" - "a_wait_vrise_tmout = \t%d\n" - "a_wait_bcon_tmout = \t%d\n" - "a_aidl_bdis_tmout = \t%d\n" - "b_ase0_brst_tmout = \t%d\n" - "a_bus_drop = \t%d\n" - "a_bus_req = \t%d\n" - "a_clr_err = \t%d\n" - "a_suspend_req = \t%d\n" - "b_bus_req = \t%d\n" - "b_bus_suspend_tmout = \t%d\n" - "b_bus_suspend_vld = \t%d\n", - otg_state_string(iotg->otg.state), - iotg->hsm.a_bus_resume, - iotg->hsm.a_bus_suspend, - iotg->hsm.a_conn, - iotg->hsm.a_sess_vld, - iotg->hsm.a_srp_det, - iotg->hsm.a_vbus_vld, - iotg->hsm.b_bus_resume, - iotg->hsm.b_bus_suspend, - iotg->hsm.b_conn, - iotg->hsm.b_se0_srp, - iotg->hsm.b_sess_end, - iotg->hsm.b_sess_vld, - iotg->hsm.id, - iotg->hsm.a_set_b_hnp_en, - iotg->hsm.b_srp_done, - iotg->hsm.b_hnp_enable, - iotg->hsm.a_wait_vrise_tmout, - iotg->hsm.a_wait_bcon_tmout, - iotg->hsm.a_aidl_bdis_tmout, - iotg->hsm.b_ase0_brst_tmout, - iotg->hsm.a_bus_drop, - iotg->hsm.a_bus_req, - iotg->hsm.a_clr_err, - iotg->hsm.a_suspend_req, - iotg->hsm.b_bus_req, - iotg->hsm.b_bus_suspend_tmout, - iotg->hsm.b_bus_suspend_vld - ); - size -= t; - next += t; - - return PAGE_SIZE - size; -} -static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL); - -static ssize_t -get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_req); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_a_bus_req(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (!iotg->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '0') { - iotg->hsm.a_bus_req = 0; - dev_dbg(lnw->dev, "User request: a_bus_req = 0\n"); - } else if (buf[0] == '1') { - /* If a_bus_drop is TRUE, a_bus_req can't be set */ - if (iotg->hsm.a_bus_drop) - return -1; - iotg->hsm.a_bus_req = 1; - dev_dbg(lnw->dev, "User request: a_bus_req = 1\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req); - -static ssize_t -get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_drop); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_a_bus_drop(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (!iotg->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '0') { - iotg->hsm.a_bus_drop = 0; - dev_dbg(lnw->dev, "User request: a_bus_drop = 0\n"); - } else if (buf[0] == '1') { - iotg->hsm.a_bus_drop = 1; - iotg->hsm.a_bus_req = 0; - dev_dbg(lnw->dev, "User request: a_bus_drop = 1\n"); - dev_dbg(lnw->dev, "User request: and a_bus_req = 0\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop); - -static ssize_t -get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", lnw->iotg.hsm.b_bus_req); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_b_bus_req(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (iotg->otg.default_a) - return -1; - - if (count > 2) - return -1; - - if (buf[0] == '0') { - iotg->hsm.b_bus_req = 0; - dev_dbg(lnw->dev, "User request: b_bus_req = 0\n"); - } else if (buf[0] == '1') { - iotg->hsm.b_bus_req = 1; - dev_dbg(lnw->dev, "User request: b_bus_req = 1\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req); - -static ssize_t -set_a_clr_err(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (!iotg->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '1') { - iotg->hsm.a_clr_err = 1; - dev_dbg(lnw->dev, "User request: a_clr_err = 1\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err); - -static struct attribute *inputs_attrs[] = { - &dev_attr_a_bus_req.attr, - &dev_attr_a_bus_drop.attr, - &dev_attr_b_bus_req.attr, - &dev_attr_a_clr_err.attr, - NULL, -}; - -static struct attribute_group debug_dev_attr_group = { - .name = "inputs", - .attrs = inputs_attrs, -}; - -static int langwell_otg_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - unsigned long resource, len; - void __iomem *base = NULL; - int retval; - u32 val32; - struct langwell_otg *lnw; - char qname[] = "langwell_otg_queue"; - - retval = 0; - dev_dbg(&pdev->dev, "\notg controller is detected.\n"); - if (pci_enable_device(pdev) < 0) { - retval = -ENODEV; - goto done; - } - - lnw = kzalloc(sizeof *lnw, GFP_KERNEL); - if (lnw == NULL) { - retval = -ENOMEM; - goto done; - } - the_transceiver = lnw; - - /* control register: BAR 0 */ - resource = pci_resource_start(pdev, 0); - len = pci_resource_len(pdev, 0); - if (!request_mem_region(resource, len, driver_name)) { - retval = -EBUSY; - goto err; - } - lnw->region = 1; - - base = ioremap_nocache(resource, len); - if (base == NULL) { - retval = -EFAULT; - goto err; - } - lnw->iotg.base = base; - - if (!request_mem_region(USBCFG_ADDR, USBCFG_LEN, driver_name)) { - retval = -EBUSY; - goto err; - } - lnw->cfg_region = 1; - - /* For the SCCB.USBCFG register */ - base = ioremap_nocache(USBCFG_ADDR, USBCFG_LEN); - if (base == NULL) { - retval = -EFAULT; - goto err; - } - lnw->usbcfg = base; - - if (!pdev->irq) { - dev_dbg(&pdev->dev, "No IRQ.\n"); - retval = -ENODEV; - goto err; - } - - lnw->qwork = create_singlethread_workqueue(qname); - if (!lnw->qwork) { - dev_dbg(&pdev->dev, "cannot create workqueue %s\n", qname); - retval = -ENOMEM; - goto err; - } - INIT_WORK(&lnw->work, langwell_otg_work); - - /* OTG common part */ - lnw->dev = &pdev->dev; - lnw->iotg.otg.dev = lnw->dev; - lnw->iotg.otg.label = driver_name; - lnw->iotg.otg.set_host = langwell_otg_set_host; - lnw->iotg.otg.set_peripheral = langwell_otg_set_peripheral; - lnw->iotg.otg.set_power = langwell_otg_set_power; - lnw->iotg.otg.set_vbus = langwell_otg_set_vbus; - lnw->iotg.otg.start_srp = langwell_otg_start_srp; - lnw->iotg.otg.state = OTG_STATE_UNDEFINED; - - if (otg_set_transceiver(&lnw->iotg.otg)) { - dev_dbg(lnw->dev, "can't set transceiver\n"); - retval = -EBUSY; - goto err; - } - - reset_otg(); - init_hsm(); - - spin_lock_init(&lnw->lock); - spin_lock_init(&lnw->wq_lock); - INIT_LIST_HEAD(&active_timers); - retval = langwell_otg_init_timers(&lnw->iotg.hsm); - if (retval) { - dev_dbg(&pdev->dev, "Failed to init timers\n"); - goto err; - } - - init_timer(&lnw->hsm_timer); - ATOMIC_INIT_NOTIFIER_HEAD(&lnw->iotg.iotg_notifier); - - lnw->iotg_notifier.notifier_call = langwell_otg_iotg_notify; - - retval = intel_mid_otg_register_notifier(&lnw->iotg, - &lnw->iotg_notifier); - if (retval) { - dev_dbg(lnw->dev, "Failed to register notifier\n"); - goto err; - } - - if (request_irq(pdev->irq, otg_irq, IRQF_SHARED, - driver_name, lnw) != 0) { - dev_dbg(lnw->dev, "request interrupt %d failed\n", pdev->irq); - retval = -EBUSY; - goto err; - } - - /* enable OTGSC int */ - val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE | - OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU; - writel(val32, lnw->iotg.base + CI_OTGSC); - - retval = device_create_file(&pdev->dev, &dev_attr_registers); - if (retval < 0) { - dev_dbg(lnw->dev, - "Can't register sysfs attribute: %d\n", retval); - goto err; - } - - retval = device_create_file(&pdev->dev, &dev_attr_hsm); - if (retval < 0) { - dev_dbg(lnw->dev, "Can't hsm sysfs attribute: %d\n", retval); - goto err; - } - - retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group); - if (retval < 0) { - dev_dbg(lnw->dev, - "Can't register sysfs attr group: %d\n", retval); - goto err; - } - - if (lnw->iotg.otg.state == OTG_STATE_A_IDLE) - langwell_update_transceiver(); - - return 0; - -err: - if (the_transceiver) - langwell_otg_remove(pdev); -done: - return retval; -} - -static void langwell_otg_remove(struct pci_dev *pdev) -{ - struct langwell_otg *lnw = the_transceiver; - - if (lnw->qwork) { - flush_workqueue(lnw->qwork); - destroy_workqueue(lnw->qwork); - } - intel_mid_otg_unregister_notifier(&lnw->iotg, &lnw->iotg_notifier); - langwell_otg_free_timers(); - - /* disable OTGSC interrupt as OTGSC doesn't change in reset */ - writel(0, lnw->iotg.base + CI_OTGSC); - - if (pdev->irq) - free_irq(pdev->irq, lnw); - if (lnw->usbcfg) - iounmap(lnw->usbcfg); - if (lnw->cfg_region) - release_mem_region(USBCFG_ADDR, USBCFG_LEN); - if (lnw->iotg.base) - iounmap(lnw->iotg.base); - if (lnw->region) - release_mem_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - - otg_set_transceiver(NULL); - pci_disable_device(pdev); - sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group); - device_remove_file(&pdev->dev, &dev_attr_hsm); - device_remove_file(&pdev->dev, &dev_attr_registers); - kfree(lnw); - lnw = NULL; -} - -static void transceiver_suspend(struct pci_dev *pdev) -{ - pci_save_state(pdev); - pci_set_power_state(pdev, PCI_D3hot); - langwell_otg_phy_low_power(1); -} - -static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - int ret = 0; - - /* Disbale OTG interrupts */ - langwell_otg_intr(0); - - if (pdev->irq) - free_irq(pdev->irq, lnw); - - /* Prevent more otg_work */ - flush_workqueue(lnw->qwork); - destroy_workqueue(lnw->qwork); - lnw->qwork = NULL; - - /* start actions */ - switch (iotg->otg.state) { - case OTG_STATE_A_WAIT_VFALL: - iotg->otg.state = OTG_STATE_A_IDLE; - case OTG_STATE_A_IDLE: - case OTG_STATE_B_IDLE: - case OTG_STATE_A_VBUS_ERR: - transceiver_suspend(pdev); - break; - case OTG_STATE_A_WAIT_VRISE: - langwell_otg_del_timer(a_wait_vrise_tmr); - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_WAIT_BCON: - del_timer_sync(&lnw->hsm_timer); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_HOST: - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_SUSPEND: - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, "host driver has been removed.\n"); - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_PERIPHERAL: - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(&pdev->dev, - "client driver has been removed.\n"); - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_B_HOST: - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - iotg->hsm.b_bus_req = 0; - iotg->otg.state = OTG_STATE_B_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_B_PERIPHERAL: - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(&pdev->dev, - "client driver has been removed.\n"); - iotg->otg.state = OTG_STATE_B_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_B_WAIT_ACON: - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - langwell_otg_HAAR(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - iotg->hsm.b_bus_req = 0; - iotg->otg.state = OTG_STATE_B_IDLE; - transceiver_suspend(pdev); - break; - default: - dev_dbg(lnw->dev, "error state before suspend\n"); - break; - } - - return ret; -} - -static void transceiver_resume(struct pci_dev *pdev) -{ - pci_restore_state(pdev); - pci_set_power_state(pdev, PCI_D0); -} - -static int langwell_otg_resume(struct pci_dev *pdev) -{ - struct langwell_otg *lnw = the_transceiver; - int ret = 0; - - transceiver_resume(pdev); - - lnw->qwork = create_singlethread_workqueue("langwell_otg_queue"); - if (!lnw->qwork) { - dev_dbg(&pdev->dev, "cannot create langwell otg workqueuen"); - ret = -ENOMEM; - goto error; - } - - if (request_irq(pdev->irq, otg_irq, IRQF_SHARED, - driver_name, lnw) != 0) { - dev_dbg(&pdev->dev, "request interrupt %d failed\n", pdev->irq); - ret = -EBUSY; - goto error; - } - - /* enable OTG interrupts */ - langwell_otg_intr(1); - - update_hsm(); - - langwell_update_transceiver(); - - return ret; -error: - langwell_otg_intr(0); - transceiver_suspend(pdev); - return ret; -} - -static int __init langwell_otg_init(void) -{ - return pci_register_driver(&otg_pci_driver); -} -module_init(langwell_otg_init); - -static void __exit langwell_otg_cleanup(void) -{ - pci_unregister_driver(&otg_pci_driver); -} -module_exit(langwell_otg_cleanup); diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c index db0d4fc..b5fbe14 100644 --- a/drivers/usb/otg/mv_otg.c +++ b/drivers/usb/otg/mv_otg.c @@ -202,6 +202,7 @@ static void mv_otg_init_irq(struct mv_otg *mvotg) static void mv_otg_start_host(struct mv_otg *mvotg, int on) { +#ifdef CONFIG_USB struct otg_transceiver *otg = &mvotg->otg; struct usb_hcd *hcd; @@ -216,6 +217,7 @@ static void mv_otg_start_host(struct mv_otg *mvotg, int on) usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); else usb_remove_hcd(hcd); +#endif /* CONFIG_USB */ } static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 528691d5f..7542aa9 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -425,7 +425,7 @@ static int usbhsg_recip_run_handle(struct usbhs_priv *priv, struct usbhs_pipe *pipe; int recip = ctrl->bRequestType & USB_RECIP_MASK; int nth = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; - int ret; + int ret = 0; int (*func)(struct usbhs_priv *priv, struct usbhsg_uep *uep, struct usb_ctrlrequest *ctrl); char *msg; diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index fba1147..8dbf51a 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -39,6 +39,8 @@ static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *port); static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp); +static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *, + struct ktermios *); static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, struct ktermios*); static int cp210x_tiocmget(struct tty_struct *); @@ -138,6 +140,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ + { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */ { } /* Terminating Entry */ }; @@ -201,6 +204,8 @@ static struct usb_serial_driver cp210x_device = { #define CP210X_EMBED_EVENTS 0x15 #define CP210X_GET_EVENTSTATE 0x16 #define CP210X_SET_CHARS 0x19 +#define CP210X_GET_BAUDRATE 0x1D +#define CP210X_SET_BAUDRATE 0x1E /* CP210X_IFC_ENABLE */ #define UART_ENABLE 0x0001 @@ -360,8 +365,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port, * Quantises the baud rate as per AN205 Table 1 */ static unsigned int cp210x_quantise_baudrate(unsigned int baud) { - if (baud <= 56) baud = 0; - else if (baud <= 300) baud = 300; + if (baud <= 300) + baud = 300; else if (baud <= 600) baud = 600; else if (baud <= 1200) baud = 1200; else if (baud <= 1800) baud = 1800; @@ -389,10 +394,10 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) { else if (baud <= 491520) baud = 460800; else if (baud <= 567138) baud = 500000; else if (baud <= 670254) baud = 576000; - else if (baud <= 1053257) baud = 921600; - else if (baud <= 1474560) baud = 1228800; - else if (baud <= 2457600) baud = 1843200; - else baud = 3686400; + else if (baud < 1000000) + baud = 921600; + else if (baud > 2000000) + baud = 2000000; return baud; } @@ -409,13 +414,14 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) return result; } - result = usb_serial_generic_open(tty, port); - if (result) - return result; - /* Configure the termios structure */ cp210x_get_termios(tty, port); - return 0; + + /* The baud rate must be initialised on cp2104 */ + if (tty) + cp210x_change_speed(tty, port, NULL); + + return usb_serial_generic_open(tty, port); } static void cp210x_close(struct usb_serial_port *port) @@ -467,10 +473,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2); - /* Convert to baudrate */ - if (baud) - baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); + cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4); dbg("%s - baud rate = %d", __func__, baud); *baudp = baud; @@ -579,11 +582,64 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, *cflagp = cflag; } +/* + * CP2101 supports the following baud rates: + * + * 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800, + * 38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600 + * + * CP2102 and CP2103 support the following additional rates: + * + * 4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000, + * 576000 + * + * The device will map a requested rate to a supported one, but the result + * of requests for rates greater than 1053257 is undefined (see AN205). + * + * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud, + * respectively, with an error less than 1%. The actual rates are determined + * by + * + * div = round(freq / (2 x prescale x request)) + * actual = freq / (2 x prescale x div) + * + * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps + * or 1 otherwise. + * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1 + * otherwise. + */ +static void cp210x_change_speed(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + u32 baud; + + baud = tty->termios->c_ospeed; + + /* This maps the requested rate to a rate valid on cp2102 or cp2103, + * or to an arbitrary rate in [1M,2M]. + * + * NOTE: B0 is not implemented. + */ + baud = cp210x_quantise_baudrate(baud); + + dbg("%s - setting baud rate to %u", __func__, baud); + if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud, + sizeof(baud))) { + dev_warn(&port->dev, "failed to set baud rate to %u\n", baud); + if (old_termios) + baud = old_termios->c_ospeed; + else + baud = 9600; + } + + tty_encode_baud_rate(tty, baud, baud); +} + static void cp210x_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { unsigned int cflag, old_cflag; - unsigned int baud = 0, bits; + unsigned int bits; unsigned int modem_ctl[4]; dbg("%s - port %d", __func__, port->number); @@ -593,20 +649,9 @@ static void cp210x_set_termios(struct tty_struct *tty, cflag = tty->termios->c_cflag; old_cflag = old_termios->c_cflag; - baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty)); - - /* If the baud rate is to be updated*/ - if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { - dbg("%s - Setting baud rate to %d baud", __func__, - baud); - if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV, - ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { - dbg("Baud rate requested not supported by device"); - baud = tty_termios_baud_rate(old_termios); - } - } - /* Report back the resulting baud rate */ - tty_encode_baud_rate(tty, baud, baud); + + if (tty->termios->c_ospeed != old_termios->c_ospeed) + cp210x_change_speed(tty, port, old_termios); /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 01b6404..ad654f8 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -797,6 +797,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(HORNBY_VID, HORNBY_ELITE_PID) }, { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, @@ -805,6 +806,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) }, { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) }, { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) }, @@ -841,6 +844,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(ST_VID, ST_STMCLT1030_PID), .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_RF_R106) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -1333,8 +1337,7 @@ static int set_serial_info(struct tty_struct *tty, goto check_and_exit; } - if ((new_serial.baud_base != priv->baud_base) && - (new_serial.baud_base < 9600)) { + if (new_serial.baud_base != priv->baud_base) { mutex_unlock(&priv->cfg_lock); return -EINVAL; } @@ -1824,6 +1827,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) { + struct ktermios dummy; struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); int result; @@ -1842,8 +1846,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) This is same behaviour as serial.c/rs_open() - Kuba */ /* ftdi_set_termios will send usb control messages */ - if (tty) - ftdi_set_termios(tty, port, tty->termios); + if (tty) { + memset(&dummy, 0, sizeof(dummy)); + ftdi_set_termios(tty, port, &dummy); + } /* Start reading from the device */ result = usb_serial_generic_open(tty, port); diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index df1d7da..f994503 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -39,6 +39,13 @@ /* www.candapter.com Ewert Energy Systems CANdapter device */ #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ +/* + * Texas Instruments XDS100v2 JTAG / BeagleBone A3 + * http://processors.wiki.ti.com/index.php/XDS100 + * http://beagleboard.org/bone + */ +#define TI_XDS100V2_PID 0xa6d0 + #define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */ /* US Interface Navigator (http://www.usinterface.com/) */ @@ -525,6 +532,12 @@ #define ADI_GNICEPLUS_PID 0xF001 /* + * Hornby Elite + */ +#define HORNBY_VID 0x04D8 +#define HORNBY_ELITE_PID 0x000A + +/* * RATOC REX-USB60F */ #define RATOC_VENDOR_ID 0x0584 @@ -1168,3 +1181,9 @@ */ /* TagTracer MIFARE*/ #define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID 0xF7C0 + +/* + * Rainforest Automation + */ +/* ZigBee controller */ +#define FTDI_RF_R106 0x8A28 diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 65bf06a..5818bfc 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2657,15 +2657,7 @@ cleanup: static void edge_disconnect(struct usb_serial *serial) { - int i; - struct edgeport_port *edge_port; - dbg("%s", __func__); - - for (i = 0; i < serial->num_ports; ++i) { - edge_port = usb_get_serial_port_data(serial->port[i]); - edge_remove_sysfs_attrs(edge_port->port); - } } static void edge_release(struct usb_serial *serial) @@ -2744,6 +2736,7 @@ static struct usb_serial_driver edgeport_1port_device = { .disconnect = edge_disconnect, .release = edge_release, .port_probe = edge_create_sysfs_attrs, + .port_remove = edge_remove_sysfs_attrs, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, @@ -2775,6 +2768,7 @@ static struct usb_serial_driver edgeport_2port_device = { .disconnect = edge_disconnect, .release = edge_release, .port_probe = edge_create_sysfs_attrs, + .port_remove = edge_remove_sysfs_attrs, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 5d3beee..a92a3ef 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -38,7 +38,7 @@ #include <linux/ioctl.h> #include "kobil_sct.h" -static int debug; +static bool debug; /* Version Information */ #define DRIVER_VERSION "21/05/2004" diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 420d985..ea126a4 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -480,6 +480,10 @@ static void option_instat_callback(struct urb *urb); #define ZD_VENDOR_ID 0x0685 #define ZD_PRODUCT_7000 0x7000 +/* LG products */ +#define LG_VENDOR_ID 0x1004 +#define LG_PRODUCT_L02C 0x618f + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -1183,6 +1187,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) }, + { USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index 30b73e6..a348198 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -36,6 +36,7 @@ #define UTSTARCOM_PRODUCT_UM175_V1 0x3712 #define UTSTARCOM_PRODUCT_UM175_V2 0x3714 #define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 +#define PANTECH_PRODUCT_UML190_VZW 0x3716 #define PANTECH_PRODUCT_UML290_VZW 0x3718 /* CMOTECH devices */ @@ -67,7 +68,11 @@ static struct usb_device_id id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) }, - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) }, /* NMEA */ + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) }, /* WMC */ + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, /* DIAG */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 1f62723..d32f720 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -789,7 +789,7 @@ static void rts51x_suspend_timer_fn(unsigned long data) rts51x_set_stat(chip, RTS51X_STAT_SS); /* ignore mass storage interface's children */ pm_suspend_ignore_children(&us->pusb_intf->dev, true); - usb_autopm_put_interface(us->pusb_intf); + usb_autopm_put_interface_async(us->pusb_intf); US_DEBUGP("%s: RTS51X_STAT_SS 01," "intf->pm_usage_cnt:%d, power.usage:%d\n", __func__, diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 8efeae2..b4a7167 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -27,8 +27,6 @@ #define USB_SKEL_VENDOR_ID 0xfff0 #define USB_SKEL_PRODUCT_ID 0xfff0 -static DEFINE_MUTEX(skel_mutex); - /* table of devices that work with this driver */ static const struct usb_device_id skel_table[] = { { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) }, @@ -101,25 +99,18 @@ static int skel_open(struct inode *inode, struct file *file) goto exit; } - mutex_lock(&skel_mutex); dev = usb_get_intfdata(interface); if (!dev) { - mutex_unlock(&skel_mutex); retval = -ENODEV; goto exit; } /* increment our usage count for the device */ kref_get(&dev->kref); - mutex_unlock(&skel_mutex); /* lock the device to allow correctly handling errors * in resumption */ mutex_lock(&dev->io_mutex); - if (!dev->interface) { - retval = -ENODEV; - goto out_err; - } retval = usb_autopm_get_interface(interface); if (retval) @@ -127,11 +118,7 @@ static int skel_open(struct inode *inode, struct file *file) /* save our object in the file's private structure */ file->private_data = dev; - -out_err: mutex_unlock(&dev->io_mutex); - if (retval) - kref_put(&dev->kref, skel_delete); exit: return retval; @@ -611,6 +598,7 @@ static void skel_disconnect(struct usb_interface *interface) int minor = interface->minor; dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); /* give back our minor */ usb_deregister_dev(interface, &skel_class); @@ -622,12 +610,8 @@ static void skel_disconnect(struct usb_interface *interface) usb_kill_anchored_urbs(&dev->submitted); - mutex_lock(&skel_mutex); - usb_set_intfdata(interface, NULL); - /* decrement our usage count */ kref_put(&dev->kref, skel_delete); - mutex_unlock(&skel_mutex); dev_info(&interface->dev, "USB Skeleton #%d now disconnected", minor); } diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig index 0ead882..f29fdd7 100644 --- a/drivers/usb/wusbcore/Kconfig +++ b/drivers/usb/wusbcore/Kconfig @@ -6,7 +6,7 @@ config USB_WUSB depends on EXPERIMENTAL depends on USB depends on PCI - select UWB + depends on UWB select CRYPTO select CRYPTO_BLKCIPHER select CRYPTO_CBC diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 79e1b29..5aa43c3 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -35,7 +35,7 @@ #define virtio_rmb(vq) \ do { if ((vq)->weak_barriers) smp_rmb(); else rmb(); } while(0) #define virtio_wmb(vq) \ - do { if ((vq)->weak_barriers) smp_rmb(); else rmb(); } while(0) + do { if ((vq)->weak_barriers) smp_wmb(); else wmb(); } while(0) #else /* We must force memory ordering even if guest is UP since host could be * running on another CPU, but SMP barriers are defined to barrier() in that @@ -308,9 +308,9 @@ bool virtqueue_kick_prepare(struct virtqueue *_vq) bool needs_kick; START_USE(vq); - /* Descriptors and available array need to be set before we expose the - * new available array entries. */ - virtio_wmb(vq); + /* We need to expose available array entries before checking avail + * event. */ + virtio_mb(vq); old = vq->vring.avail->idx - vq->num_added; new = vq->vring.avail->idx; diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c index 1b0e3dd..63d7b58 100644 --- a/drivers/watchdog/dw_wdt.c +++ b/drivers/watchdog/dw_wdt.c @@ -300,11 +300,7 @@ static int __devinit dw_wdt_drv_probe(struct platform_device *pdev) if (!mem) return -EINVAL; - if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem), - "dw_wdt")) - return -ENOMEM; - - dw_wdt.regs = devm_ioremap(&pdev->dev, mem->start, resource_size(mem)); + dw_wdt.regs = devm_request_and_ioremap(&pdev->dev, mem); if (!dw_wdt.regs) return -ENOMEM; diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index 99796c5..bdf401b 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -36,6 +36,7 @@ * document number TBD : Patsburg (PBG) * document number TBD : DH89xxCC * document number TBD : Panther Point + * document number TBD : Lynx Point */ /* @@ -126,6 +127,7 @@ enum iTCO_chipsets { TCO_PBG, /* Patsburg */ TCO_DH89XXCC, /* DH89xxCC */ TCO_PPT, /* Panther Point */ + TCO_LPT, /* Lynx Point */ }; static struct { @@ -189,6 +191,7 @@ static struct { {"Patsburg", 2}, {"DH89xxCC", 2}, {"Panther Point", 2}, + {"Lynx Point", 2}, {NULL, 0} }; @@ -331,6 +334,38 @@ static DEFINE_PCI_DEVICE_TABLE(iTCO_wdt_pci_tbl) = { { PCI_VDEVICE(INTEL, 0x1e5d), TCO_PPT}, { PCI_VDEVICE(INTEL, 0x1e5e), TCO_PPT}, { PCI_VDEVICE(INTEL, 0x1e5f), TCO_PPT}, + { PCI_VDEVICE(INTEL, 0x8c40), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c41), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c42), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c43), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c44), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c45), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c46), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c47), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c48), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c49), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c4a), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c4b), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c4c), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c4d), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c4e), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c4f), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c50), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c51), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c52), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c53), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c54), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c55), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c56), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c57), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c58), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c59), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c5a), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c5b), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c5c), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c5d), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c5e), TCO_LPT}, + { PCI_VDEVICE(INTEL, 0x8c5f), TCO_LPT}, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c index b8ef2c6..c44c333 100644 --- a/drivers/watchdog/imx2_wdt.c +++ b/drivers/watchdog/imx2_wdt.c @@ -247,7 +247,6 @@ static struct miscdevice imx2_wdt_miscdev = { static int __init imx2_wdt_probe(struct platform_device *pdev) { int ret; - int res_size; struct resource *res; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -256,15 +255,7 @@ static int __init imx2_wdt_probe(struct platform_device *pdev) return -ENODEV; } - res_size = resource_size(res); - if (!devm_request_mem_region(&pdev->dev, res->start, res_size, - res->name)) { - dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n", - res_size, res->start); - return -ENOMEM; - } - - imx2_wdt.base = devm_ioremap_nocache(&pdev->dev, res->start, res_size); + imx2_wdt.base = devm_request_and_ioremap(&pdev->dev, res); if (!imx2_wdt.base) { dev_err(&pdev->dev, "ioremap failed\n"); return -ENOMEM; diff --git a/drivers/watchdog/nuc900_wdt.c b/drivers/watchdog/nuc900_wdt.c index 50359ba..529085b 100644 --- a/drivers/watchdog/nuc900_wdt.c +++ b/drivers/watchdog/nuc900_wdt.c @@ -72,7 +72,7 @@ struct nuc900_wdt { }; static unsigned long nuc900wdt_busy; -struct nuc900_wdt *nuc900_wdt; +static struct nuc900_wdt *nuc900_wdt; static inline void nuc900_wdt_keepalive(void) { @@ -287,7 +287,8 @@ static int __devinit nuc900wdt_probe(struct platform_device *pdev) setup_timer(&nuc900_wdt->timer, nuc900_wdt_timer_ping, 0); - if (misc_register(&nuc900wdt_miscdev)) { + ret = misc_register(&nuc900wdt_miscdev); + if (ret) { dev_err(&pdev->dev, "err register miscdev on minor=%d (%d)\n", WATCHDOG_MINOR, ret); goto err_clk; diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 4b33e3f..d19ff51 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -339,6 +339,7 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev) return 0; err_misc: + pm_runtime_disable(wdev->dev); platform_set_drvdata(pdev, NULL); iounmap(wdev->base); @@ -371,6 +372,7 @@ static int __devexit omap_wdt_remove(struct platform_device *pdev) struct omap_wdt_dev *wdev = platform_get_drvdata(pdev); struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pm_runtime_disable(wdev->dev); if (!res) return -ENOENT; diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index bd143c9..8e210aa 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -226,7 +226,7 @@ static long pnx4008_wdt_ioctl(struct file *file, unsigned int cmd, static int pnx4008_wdt_release(struct inode *inode, struct file *file) { if (!test_bit(WDT_OK_TO_CLOSE, &wdt_status)) - printk(KERN_WARNING "WATCHDOG: Device closed unexpectdly\n"); + printk(KERN_WARNING "WATCHDOG: Device closed unexpectedly\n"); wdt_disable(); clk_disable(wdt_clk); diff --git a/drivers/watchdog/stmp3xxx_wdt.c b/drivers/watchdog/stmp3xxx_wdt.c index 4c2a4e8..e37d811 100644 --- a/drivers/watchdog/stmp3xxx_wdt.c +++ b/drivers/watchdog/stmp3xxx_wdt.c @@ -174,7 +174,7 @@ static int stmp3xxx_wdt_release(struct inode *inode, struct file *file) if (!nowayout) { if (!test_bit(WDT_OK_TO_CLOSE, &wdt_status)) { wdt_ping(); - pr_debug("%s: Device closed unexpectdly\n", __func__); + pr_debug("%s: Device closed unexpectedly\n", __func__); ret = -EINVAL; } else { wdt_disable(); diff --git a/drivers/watchdog/via_wdt.c b/drivers/watchdog/via_wdt.c index 026b4bb..8f07dd4 100644 --- a/drivers/watchdog/via_wdt.c +++ b/drivers/watchdog/via_wdt.c @@ -124,8 +124,6 @@ static int wdt_stop(struct watchdog_device *wdd) static int wdt_set_timeout(struct watchdog_device *wdd, unsigned int new_timeout) { - if (new_timeout < 1 || new_timeout > WDT_TIMEOUT_MAX) - return -EINVAL; writel(new_timeout, wdt_mem + VIA_WDT_COUNT); timeout = new_timeout; return 0; @@ -150,6 +148,8 @@ static const struct watchdog_ops wdt_ops = { static struct watchdog_device wdt_dev = { .info = &wdt_info, .ops = &wdt_ops, + .min_timeout = 1, + .max_timeout = WDT_TIMEOUT_MAX, }; static int __devinit wdt_probe(struct pci_dev *pdev, @@ -233,7 +233,7 @@ static void __devexit wdt_remove(struct pci_dev *pdev) pci_disable_device(pdev); } -DEFINE_PCI_DEVICE_TABLE(wdt_pci_table) = { +static DEFINE_PCI_DEVICE_TABLE(wdt_pci_table) = { { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700) }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800) }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855) }, diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c index 42e940c..c3c3188 100644 --- a/drivers/watchdog/wafer5823wdt.c +++ b/drivers/watchdog/wafer5823wdt.c @@ -152,12 +152,12 @@ static long wafwdt_ioctl(struct file *file, unsigned int cmd, return -EFAULT; if (options & WDIOS_DISABLECARD) { - wafwdt_start(); + wafwdt_stop(); retval = 0; } if (options & WDIOS_ENABLECARD) { - wafwdt_stop(); + wafwdt_start(); retval = 0; } diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c index 909c786..5d7113c 100644 --- a/drivers/watchdog/wm8350_wdt.c +++ b/drivers/watchdog/wm8350_wdt.c @@ -212,10 +212,10 @@ static long wm8350_wdt_ioctl(struct file *file, unsigned int cmd, /* Setting both simultaneously means at least one must fail */ if (options == WDIOS_DISABLECARD) - ret = wm8350_wdt_start(wm8350); + ret = wm8350_wdt_stop(wm8350); if (options == WDIOS_ENABLECARD) - ret = wm8350_wdt_stop(wm8350); + ret = wm8350_wdt_start(wm8350); break; } diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 1cd94da..b4d4eac 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -948,9 +948,12 @@ static void gnttab_request_version(void) int rc; struct gnttab_set_version gsv; - gsv.version = 2; + if (xen_hvm_domain()) + gsv.version = 1; + else + gsv.version = 2; rc = HYPERVISOR_grant_table_op(GNTTABOP_set_version, &gsv, 1); - if (rc == 0) { + if (rc == 0 && gsv.version == 2) { grant_table_version = 2; gnttab_interface = &gnttab_v2_ops; } else if (grant_table_version == 2) { |