Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (24 commits)
  [Blackfin] arch: import defines for BF547 -- it is just like the BF548, but no CAN
  [Blackfin] arch: fix build fails only include header files when enabled
  [Blackfin] arch: declare default INSTALL_PATH for Blackfin ports
  [Blackfin] arch: Encourage users to use the spidev character driver: Provide platform support
  [Blackfin] arch: Enable UART2 and UART3 for bf548
  [Blackfin] arch: Enable NET2272 on BF561-EZkit - remove request_mem_region
  [Blackfin] arch:Fix BUG [#3876] pfbutton test for BTN3 on bf533 don't show complete info
  [Blackfin] arch: remove duplicated definitions of the line discipline numbers N_* in asm-blackfin/termios.h
  [Blackfin] arch: fix building with mtd uclinux by putting the mtd_phys option into the function it actually gets used in
  [Blackfin] arch: simpler header and update dates
  [Blackfin] arch: move the init sections to the end of memory
  [Blackfin] arch: change the trace buffer control start/stop logic in the exception handlers
  [Blackfin] arch: fix typo in printk message
  [Blackfin] arch: this is an ezkit, not a stamp, so fixup the init function name
  [Blackfin] arch: add slightly better help text for CPLB_INFO
  [Blackfin] arch: Fix BUG - Enable ISP1362 driver to work ok with BF561
  [Blackfin] arch: Fix header file information
  [Blackfin] arch: Add Support for ISP1362
  [Blackfin] arch: add support for cmdline partitioning to the BF533-STAMP flash map driver and enable it as a module by default
  [Blackfin] arch: hook up set_irq_wake in Blackfin's irq code
  ...

38 files changed, 3185 insertions, 866 deletions

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index ba21e33..368bc7f 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -544,7 +544,7 @@ config EXCPT_IRQ_SYSC_L1
 	default y
 	help
 	  If enabled, the entire ASM lowlevel exception and interrupt entry code
-	  (STORE/RESTORE CONTEXT) is linked into L1 instruction memory. 
+	  (STORE/RESTORE CONTEXT) is linked into L1 instruction memory.
 	  (less latency)
 
 config DO_IRQ_L1
@@ -904,29 +904,38 @@ config ARCH_SUSPEND_POSSIBLE
 	depends on !SMP
 
 choice
-	prompt "Select PM Wakeup Event Source"
-	default PM_WAKEUP_GPIO_BY_SIC_IWR
+	prompt "Default Power Saving Mode"
 	depends on PM
-	help
-	  If you have a GPIO already configured as input with the corresponding PORTx_MASK
-	  bit set - "Specify Wakeup Event by SIC_IWR value"
+	default PM_BFIN_SLEEP_DEEPER
+config  PM_BFIN_SLEEP_DEEPER
+	bool "Sleep Deeper"
+	help
+	  Sleep "Deeper" Mode (High Power Savings) - This mode reduces dynamic
+	  power dissipation by disabling the clock to the processor core (CCLK).
+	  Furthermore, Standby sets the internal power supply voltage (VDDINT)
+	  to 0.85 V to provide the greatest power savings, while preserving the
+	  processor state.
+	  The PLL and system clock (SCLK) continue to operate at a very low
+	  frequency of about 3.3 MHz. To preserve data integrity in the SDRAM,
+	  the SDRAM is put into Self Refresh Mode. Typically an external event
+	  such as GPIO interrupt or RTC activity wakes up the processor.
+	  Various Peripherals such as UART, SPORT, PPI may not function as
+	  normal during Sleep Deeper, due to the reduced SCLK frequency.
+	  When in the sleep mode, system DMA access to L1 memory is not supported.
+
+config  PM_BFIN_SLEEP
+	bool "Sleep"
+	help
+	  Sleep Mode (High Power Savings) - The sleep mode reduces power
+	  dissipation by disabling the clock to the processor core (CCLK).
+	  The PLL and system clock (SCLK), however, continue to operate in
+	  this mode. Typically an external event or RTC activity will wake
+	  up the processor. When in the sleep mode,
+	  system DMA access to L1 memory is not supported.
+endchoice
 
-config PM_WAKEUP_GPIO_BY_SIC_IWR
-	bool "Specify Wakeup Event by SIC_IWR value"
 config PM_WAKEUP_BY_GPIO
 	bool "Cause Wakeup Event by GPIO"
-config PM_WAKEUP_GPIO_API
-	bool "Configure Wakeup Event by PM GPIO API"
-
-endchoice
-
-config PM_WAKEUP_SIC_IWR
-	hex "Wakeup Events (SIC_IWR)"
-	depends on PM_WAKEUP_GPIO_BY_SIC_IWR
-	default 0x8 if (BF537 || BF536 || BF534)
-	default 0x80 if (BF533 || BF532 || BF531)
-	default 0x80 if (BF54x)
-	default 0x80 if (BF52x)
 
 config PM_WAKEUP_GPIO_NUMBER
 	int "Wakeup GPIO number"
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 59b87a4..c61bdeb 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -164,7 +164,7 @@ config DUAL_CORE_TEST_MODULE
 config CPLB_INFO
 	bool "Display the CPLB information"
 	help
-	  Display the CPLB information.
+	  Display the CPLB information via /proc/cplbinfo.
 
 config ACCESS_CHECK
 	bool "Check the user pointer address"
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 0edc402..fe254f8 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -119,6 +119,7 @@ archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
 
+INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
 BOOT_TARGETS = vmImage
 PHONY += $(BOOT_TARGETS) install
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 9b7123c..198f412 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -216,8 +216,6 @@ CONFIG_MEM_SIZE=128
 CONFIG_MEM_ADD_WIDTH=11
 CONFIG_ENET_FLASH_PIN=0
 CONFIG_BOOT_LOAD=0x1000
-
-
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -483,7 +481,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 
 #
 # User Modules And Translation Layers
@@ -500,8 +498,8 @@ CONFIG_MTD_BLOCK=y
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=m
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
@@ -515,8 +513,9 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_AMDSTD=m
 # CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -526,6 +525,11 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_BF5xx=m
+CONFIG_BFIN_FLASH_BANK_0=0x7BB0
+CONFIG_BFIN_FLASH_BANK_1=0x7BB0
+CONFIG_BFIN_FLASH_BANK_2=0x7BB0
+CONFIG_BFIN_FLASH_BANK_3=0x7BB0
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index fa9debe8..5453bc3 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -104,6 +104,16 @@ int request_dma(unsigned int channel, char *device_id)
 
 	mutex_unlock(&(dma_ch[channel].dmalock));
 
+#ifdef CONFIG_BF54x
+	if (channel >= CH_UART2_RX && channel <= CH_UART3_TX &&
+		strncmp(device_id, "BFIN_UART", 9) == 0)
+		dma_ch[channel].regs->peripheral_map |=
+			(channel - CH_UART2_RX + 0xC);
+	else
+		dma_ch[channel].regs->peripheral_map |=
+			(channel - CH_UART2_RX + 0x6);
+#endif
+
 	dma_ch[channel].device_id = device_id;
 	dma_ch[channel].irq_callback = NULL;
 
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 6bbe0a2..08788f7 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -186,7 +186,7 @@ static struct str_ident {
 	char name[RESOURCE_LABEL_SIZE];
 } str_ident[MAX_RESOURCES];
 
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_BF54x)
 static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
 static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
 static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -696,9 +696,8 @@ static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type)
 	return 0;
 }
 
-u32 gpio_pm_setup(void)
+u32 bfin_pm_setup(void)
 {
-	u32 sic_iwr = 0;
 	u16 bank, mask, i, gpio;
 
 	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
@@ -723,7 +722,8 @@ u32 gpio_pm_setup(void)
 			gpio = i;
 
 			while (mask) {
-				if (mask & 1) {
+				if ((mask & 1) && (wakeup_flags_map[gpio] !=
+					PM_WAKE_IGNORE)) {
 					reserved_gpio_map[gpio_bank(gpio)] |=
 							gpio_bit(gpio);
 					bfin_gpio_wakeup_type(gpio,
@@ -734,21 +734,17 @@ u32 gpio_pm_setup(void)
 				mask >>= 1;
 			}
 
-			sic_iwr |= 1 <<
-				(sic_iwr_irqs[bank] - (IRQ_CORETMR + 1));
+			bfin_internal_set_wake(sic_iwr_irqs[bank], 1);
 			gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)];
 		}
 	}
 
 	AWA_DUMMY_READ(maskb_set);
 
-	if (sic_iwr)
-		return sic_iwr;
-	else
-		return IWR_ENABLE_ALL;
+	return 0;
 }
 
-void gpio_pm_restore(void)
+void bfin_pm_restore(void)
 {
 	u16 bank, mask, i;
 
@@ -768,7 +764,7 @@ void gpio_pm_restore(void)
 
 			reserved_gpio_map[bank] =
 					gpio_bank_saved[bank].reserved;
-
+			bfin_internal_set_wake(sic_iwr_irqs[bank], 0);
 		}
 
 		gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb;
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index e2e2b50..dc6e8a7 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -26,6 +26,10 @@
 #include <asm/cplb.h>
 #include <asm/cplbinit.h>
 
+#if ANOMALY_05000263
+# error the MPU will not function safely while Anomaly 05000263 applies
+#endif
+
 struct cplb_entry icplb_tbl[MAX_CPLBS];
 struct cplb_entry dcplb_tbl[MAX_CPLBS];
 
diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c
index 673c860..c640154 100644
--- a/arch/blackfin/kernel/init_task.c
+++ b/arch/blackfin/kernel/init_task.c
@@ -57,5 +57,5 @@ EXPORT_SYMBOL(init_task);
  * "init_task" linker map entry.
  */
 union thread_union init_thread_union
-    __attribute__ ((__section__(".data.init_task"))) = {
+    __attribute__ ((__section__(".init_task.data"))) = {
 INIT_THREAD_INFO(init_task)};
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 289ea9d..8229b10 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -1,30 +1,11 @@
 /*
- * File:         arch/blackfin/kernel/setup.c
- * Based on:
- * Author:
+ * arch/blackfin/kernel/setup.c
  *
- * Created:
- * Description:
+ * Copyright 2004-2006 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ * Enter bugs at http://blackfin.uclinux.org/
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/delay.h>
@@ -34,6 +15,7 @@
 #include <linux/cpu.h>
 #include <linux/module.h>
 #include <linux/tty.h>
+#include <linux/pfn.h>
 
 #include <linux/ext2_fs.h>
 #include <linux/cramfs_fs.h>
@@ -47,6 +29,8 @@
 #include <asm/fixed_code.h>
 #include <asm/early_printk.h>
 
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
+
 u16 _bfin_swrst;
 
 unsigned long memory_start, memory_end, physical_mem_end;
@@ -67,6 +51,29 @@ EXPORT_SYMBOL(mtd_size);
 
 char __initdata command_line[COMMAND_LINE_SIZE];
 
+/* boot memmap, for parsing "memmap=" */
+#define BFIN_MEMMAP_MAX		128 /* number of entries in bfin_memmap */
+#define BFIN_MEMMAP_RAM		1
+#define BFIN_MEMMAP_RESERVED	2
+struct bfin_memmap {
+	int nr_map;
+	struct bfin_memmap_entry {
+		unsigned long long addr; /* start of memory segment */
+		unsigned long long size;
+		unsigned long type;
+	} map[BFIN_MEMMAP_MAX];
+} bfin_memmap __initdata;
+
+/* for memmap sanitization */
+struct change_member {
+	struct bfin_memmap_entry *pentry; /* pointer to original entry */
+	unsigned long long addr; /* address for this change point */
+};
+static struct change_member change_point_list[2*BFIN_MEMMAP_MAX] __initdata;
+static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata;
+static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata;
+static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata;
+
 void __init bf53x_cache_init(void)
 {
 #if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
@@ -123,12 +130,224 @@ void __init bf53x_relocate_l1_mem(void)
 
 }
 
+/* add_memory_region to memmap */
+static void __init add_memory_region(unsigned long long start,
+			      unsigned long long size, int type)
+{
+	int i;
+
+	i = bfin_memmap.nr_map;
+
+	if (i == BFIN_MEMMAP_MAX) {
+		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
+		return;
+	}
+
+	bfin_memmap.map[i].addr = start;
+	bfin_memmap.map[i].size = size;
+	bfin_memmap.map[i].type = type;
+	bfin_memmap.nr_map++;
+}
+
+/*
+ * Sanitize the boot memmap, removing overlaps.
+ */
+static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map)
+{
+	struct change_member *change_tmp;
+	unsigned long current_type, last_type;
+	unsigned long long last_addr;
+	int chgidx, still_changing;
+	int overlap_entries;
+	int new_entry;
+	int old_nr, new_nr, chg_nr;
+	int i;
+
+	/*
+		Visually we're performing the following (1,2,3,4 = memory types)
+
+		Sample memory map (w/overlaps):
+		   ____22__________________
+		   ______________________4_
+		   ____1111________________
+		   _44_____________________
+		   11111111________________
+		   ____________________33__
+		   ___________44___________
+		   __________33333_________
+		   ______________22________
+		   ___________________2222_
+		   _________111111111______
+		   _____________________11_
+		   _________________4______
+
+		Sanitized equivalent (no overlap):
+		   1_______________________
+		   _44_____________________
+		   ___1____________________
+		   ____22__________________
+		   ______11________________
+		   _________1______________
+		   __________3_____________
+		   ___________44___________
+		   _____________33_________
+		   _______________2________
+		   ________________1_______
+		   _________________4______
+		   ___________________2____
+		   ____________________33__
+		   ______________________4_
+	*/
+	/* if there's only one memory region, don't bother */
+	if (*pnr_map < 2)
+		return -1;
+
+	old_nr = *pnr_map;
+
+	/* bail out if we find any unreasonable addresses in memmap */
+	for (i = 0; i < old_nr; i++)
+		if (map[i].addr + map[i].size < map[i].addr)
+			return -1;
+
+	/* create pointers for initial change-point information (for sorting) */
+	for (i = 0; i < 2*old_nr; i++)
+		change_point[i] = &change_point_list[i];
+
+	/* record all known change-points (starting and ending addresses),
+	   omitting those that are for empty memory regions */
+	chgidx = 0;
+	for (i = 0; i < old_nr; i++)	{
+		if (map[i].size != 0) {
+			change_point[chgidx]->addr = map[i].addr;
+			change_point[chgidx++]->pentry = &map[i];
+			change_point[chgidx]->addr = map[i].addr + map[i].size;
+			change_point[chgidx++]->pentry = &map[i];
+		}
+	}
+	chg_nr = chgidx;    	/* true number of change-points */
+
+	/* sort change-point list by memory addresses (low -> high) */
+	still_changing = 1;
+	while (still_changing)	{
+		still_changing = 0;
+		for (i = 1; i < chg_nr; i++)  {
+			/* if <current_addr> > <last_addr>, swap */
+			/* or, if current=<start_addr> & last=<end_addr>, swap */
+			if ((change_point[i]->addr < change_point[i-1]->addr) ||
+				((change_point[i]->addr == change_point[i-1]->addr) &&
+				 (change_point[i]->addr == change_point[i]->pentry->addr) &&
+				 (change_point[i-1]->addr != change_point[i-1]->pentry->addr))
+			   ) {
+				change_tmp = change_point[i];
+				change_point[i] = change_point[i-1];
+				change_point[i-1] = change_tmp;
+				still_changing = 1;
+			}
+		}
+	}
+
+	/* create a new memmap, removing overlaps */
+	overlap_entries = 0;	 /* number of entries in the overlap table */
+	new_entry = 0;	 /* index for creating new memmap entries */
+	last_type = 0;		 /* start with undefined memory type */
+	last_addr = 0;		 /* start with 0 as last starting address */
+	/* loop through change-points, determining affect on the new memmap */
+	for (chgidx = 0; chgidx < chg_nr; chgidx++) {
+		/* keep track of all overlapping memmap entries */
+		if (change_point[chgidx]->addr == change_point[chgidx]->pentry->addr) {
+			/* add map entry to overlap list (> 1 entry implies an overlap) */
+			overlap_list[overlap_entries++] = change_point[chgidx]->pentry;
+		} else {
+			/* remove entry from list (order independent, so swap with last) */
+			for (i = 0; i < overlap_entries; i++) {
+				if (overlap_list[i] == change_point[chgidx]->pentry)
+					overlap_list[i] = overlap_list[overlap_entries-1];
+			}
+			overlap_entries--;
+		}
+		/* if there are overlapping entries, decide which "type" to use */
+		/* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
+		current_type = 0;
+		for (i = 0; i < overlap_entries; i++)
+			if (overlap_list[i]->type > current_type)
+				current_type = overlap_list[i]->type;
+		/* continue building up new memmap based on this information */
+		if (current_type != last_type)	{
+			if (last_type != 0) {
+				new_map[new_entry].size =
+					change_point[chgidx]->addr - last_addr;
+				/* move forward only if the new size was non-zero */
+				if (new_map[new_entry].size != 0)
+					if (++new_entry >= BFIN_MEMMAP_MAX)
+						break; 	/* no more space left for new entries */
+			}
+			if (current_type != 0) {
+				new_map[new_entry].addr = change_point[chgidx]->addr;
+				new_map[new_entry].type = current_type;
+				last_addr = change_point[chgidx]->addr;
+			}
+			last_type = current_type;
+		}
+	}
+	new_nr = new_entry;   /* retain count for new entries */
+
+	/* copy new  mapping into original location */
+	memcpy(map, new_map, new_nr*sizeof(struct bfin_memmap_entry));
+	*pnr_map = new_nr;
+
+	return 0;
+}
+
+static void __init print_memory_map(char *who)
+{
+	int i;
+
+	for (i = 0; i < bfin_memmap.nr_map; i++) {
+		printk(KERN_DEBUG " %s: %016Lx - %016Lx ", who,
+			bfin_memmap.map[i].addr,
+			bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
+		switch (bfin_memmap.map[i].type) {
+		case BFIN_MEMMAP_RAM:
+				printk("(usable)\n");
+				break;
+		case BFIN_MEMMAP_RESERVED:
+				printk("(reserved)\n");
+				break;
+		default:	printk("type %lu\n", bfin_memmap.map[i].type);
+				break;
+		}
+	}
+}
+
+static __init int parse_memmap(char *arg)
+{
+	unsigned long long start_at, mem_size;
+
+	if (!arg)
+		return -EINVAL;
+
+	mem_size = memparse(arg, &arg);
+	if (*arg == '@') {
+		start_at = memparse(arg+1, &arg);
+		add_memory_region(start_at, mem_size, BFIN_MEMMAP_RAM);
+	} else if (*arg == '$') {
+		start_at = memparse(arg+1, &arg);
+		add_memory_region(start_at, mem_size, BFIN_MEMMAP_RESERVED);
+	}
+
+	return 0;
+}
+
 /*
  * Initial parsing of the command line.  Currently, we support:
  *  - Controlling the linux memory size: mem=xxx[KMG]
  *  - Controlling the physical memory size: max_mem=xxx[KMG][$][#]
  *       $ -> reserved memory is dcacheable
  *       # -> reserved memory is icacheable
+ *  - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region
+ *       @ from <start> to <start>+<mem>, type RAM
+ *       $ from <start> to <start>+<mem>, type RESERVED
+ *
  */
 static __init void parse_cmdline_early(char *cmdline_p)
 {
@@ -136,7 +355,6 @@ static __init void parse_cmdline_early(char *cmdline_p)
 	unsigned int memsize;
 	for (;;) {
 		if (c == ' ') {
-
 			if (!memcmp(to, "mem=", 4)) {
 				to += 4;
 				memsize = memparse(to, &to);
@@ -162,6 +380,9 @@ static __init void parse_cmdline_early(char *cmdline_p)
 			} else if (!memcmp(to, "earlyprintk=", 12)) {
 				to += 12;
 				setup_early_printk(to);
+			} else if (!memcmp(to, "memmap=", 7)) {
+				to += 7;
+				parse_memmap(to);
 			}
 		}
 		c = *(to++);
@@ -170,75 +391,36 @@ static __init void parse_cmdline_early(char *cmdline_p)
 	}
 }
 
-void __init setup_arch(char **cmdline_p)
+/*
+ * Setup memory defaults from user config.
+ * The physical memory layout looks like:
+ *
+ *  [_rambase, _ramstart]:		kernel image
+ *  [memory_start, memory_end]:		dynamic memory managed by kernel
+ *  [memory_end, _ramend]:		reserved memory
+ *  	[meory_mtd_start(memory_end),
+ *  		memory_mtd_start + mtd_size]:	rootfs (if any)
+ *	[_ramend - DMA_UNCACHED_REGION,
+ *		_ramend]:			uncached DMA region
+ *  [_ramend, physical_mem_end]:	memory not managed by kernel
+ *
+ */
+static __init void  memory_setup(void)
 {
-	int bootmap_size;
-	unsigned long l1_length, sclk, cclk;
 #ifdef CONFIG_MTD_UCLINUX
 	unsigned long mtd_phys = 0;
 #endif
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-#if defined(CONFIG_CMDLINE_BOOL)
-	strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
-	command_line[sizeof(command_line) - 1] = 0;
-#endif
-
-	/* Keep a copy of command line */
-	*cmdline_p = &command_line[0];
-	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
-
-	/* setup memory defaults from the user config */
-	physical_mem_end = 0;
-	_ramend = CONFIG_MEM_SIZE * 1024 * 1024;
-
-	parse_cmdline_early(&command_line[0]);
-
-	cclk = get_cclk();
-	sclk = get_sclk();
-
-#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
-	if (ANOMALY_05000273 && cclk == sclk)
-		panic("ANOMALY 05000273, SCLK can not be same as CCLK");
-#endif
+	_rambase = (unsigned long)_stext;
+	_ramstart = (unsigned long)_end;
 
-#ifdef BF561_FAMILY
-	if (ANOMALY_05000266) {
-		bfin_read_IMDMA_D0_IRQ_STATUS();
-		bfin_read_IMDMA_D1_IRQ_STATUS();
+	if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
+		console_init();
+		panic("DMA region exceeds memory limit: %lu.\n",
+			_ramend - _ramstart);
 	}
-#endif
-
-	printk(KERN_INFO "Hardware Trace ");
-	if (bfin_read_TBUFCTL() & 0x1 )
-		printk("Active ");
-	else
-		printk("Off ");
-	if (bfin_read_TBUFCTL() & 0x2)
-		printk("and Enabled\n");
-	else
-	printk("and Disabled\n");
-
-
-#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
-	/* we need to initialize the Flashrom device here since we might
-	 * do things with flash early on in the boot
-	 */
-	flash_probe();
-#endif
-
-	if (physical_mem_end == 0)
-		physical_mem_end = _ramend;
-
-	/* by now the stack is part of the init task */
 	memory_end = _ramend - DMA_UNCACHED_REGION;
 
-	_ramstart = (unsigned long)__bss_stop;
-	_rambase = (unsigned long)_stext;
 #ifdef CONFIG_MPU
 	/* Round up to multiple of 4MB.  */
 	memory_start = (_ramstart + 0x3fffff) & ~0x3fffff;
@@ -292,7 +474,7 @@ void __init setup_arch(char **cmdline_p)
 	}
 
 	/* Relocate MTD image to the top of memory after the uncached memory area */
-	dma_memcpy((char *)memory_end, __bss_stop, mtd_size);
+	dma_memcpy((char *)memory_end, _end, mtd_size);
 
 	memory_mtd_start = memory_end;
 	_ebss = memory_mtd_start;	/* define _ebss for compatible */
@@ -319,13 +501,175 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 #if !defined(CONFIG_MTD_UCLINUX)
-	memory_end -= SIZE_4K; /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
+	/*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
+	memory_end -= SIZE_4K;
 #endif
+
 	init_mm.start_code = (unsigned long)_stext;
 	init_mm.end_code = (unsigned long)_etext;
 	init_mm.end_data = (unsigned long)_edata;
 	init_mm.brk = (unsigned long)0;
 
+	printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
+	printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
+
+	printk(KERN_INFO "Memory map:\n"
+		KERN_INFO "  text      = 0x%p-0x%p\n"
+		KERN_INFO "  rodata    = 0x%p-0x%p\n"
+		KERN_INFO "  bss       = 0x%p-0x%p\n"
+		KERN_INFO "  data      = 0x%p-0x%p\n"
+		KERN_INFO "    stack   = 0x%p-0x%p\n"
+		KERN_INFO "  init      = 0x%p-0x%p\n"
+		KERN_INFO "  available = 0x%p-0x%p\n"
+#ifdef CONFIG_MTD_UCLINUX
+		KERN_INFO "  rootfs    = 0x%p-0x%p\n"
+#endif
+#if DMA_UNCACHED_REGION > 0
+		KERN_INFO "  DMA Zone  = 0x%p-0x%p\n"
+#endif
+		, _stext, _etext,
+		__start_rodata, __end_rodata,
+		__bss_start, __bss_stop,
+		_sdata, _edata,
+		(void *)&init_thread_union,
+		(void *)((int)(&init_thread_union) + 0x2000),
+		__init_begin, __init_end,
+		(void *)_ramstart, (void *)memory_end
+#ifdef CONFIG_MTD_UCLINUX
+		, (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size)
+#endif
+#if DMA_UNCACHED_REGION > 0
+		, (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend)
+#endif
+		);
+}
+
+static __init void setup_bootmem_allocator(void)
+{
+	int bootmap_size;
+	int i;
+	unsigned long min_pfn, max_pfn;
+	unsigned long curr_pfn, last_pfn, size;
+
+	/* mark memory between memory_start and memory_end usable */
+	add_memory_region(memory_start,
+		memory_end - memory_start, BFIN_MEMMAP_RAM);
+	/* sanity check for overlap */
+	sanitize_memmap(bfin_memmap.map, &bfin_memmap.nr_map);
+	print_memory_map("boot memmap");
+
+	min_pfn = PAGE_OFFSET >> PAGE_SHIFT;
+	max_pfn = memory_end >> PAGE_SHIFT;
+
+	/*
+	 * give all the memory to the bootmap allocator,  tell it to put the
+	 * boot mem_map at the start of memory.
+	 */
+	bootmap_size = init_bootmem_node(NODE_DATA(0),
+			memory_start >> PAGE_SHIFT,	/* map goes here */
+			min_pfn, max_pfn);
+
+	/* register the memmap regions with the bootmem allocator */
+	for (i = 0; i < bfin_memmap.nr_map; i++) {
+		/*
+		 * Reserve usable memory
+		 */
+		if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM)
+			continue;
+		/*
+		 * We are rounding up the start address of usable memory:
+		 */
+		curr_pfn = PFN_UP(bfin_memmap.map[i].addr);
+		if (curr_pfn >= max_pfn)
+			continue;
+		/*
+		 * ... and at the end of the usable range downwards:
+		 */
+		last_pfn = PFN_DOWN(bfin_memmap.map[i].addr +
+					 bfin_memmap.map[i].size);
+
+		if (last_pfn > max_pfn)
+			last_pfn = max_pfn;
+
+		/*
+		 * .. finally, did all the rounding and playing
+		 * around just make the area go away?
+		 */
+		if (last_pfn <= curr_pfn)
+			continue;
+
+		size = last_pfn - curr_pfn;
+		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
+	}
+
+	/* reserve memory before memory_start, including bootmap */
+	reserve_bootmem(PAGE_OFFSET,
+		memory_start + bootmap_size + PAGE_SIZE - 1 - PAGE_OFFSET,
+		BOOTMEM_DEFAULT);
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+	unsigned long l1_length, sclk, cclk;
+
+#ifdef CONFIG_DUMMY_CONSOLE
+	conswitchp = &dummy_con;
+#endif
+
+#if defined(CONFIG_CMDLINE_BOOL)
+	strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
+	command_line[sizeof(command_line) - 1] = 0;
+#endif
+
+	/* Keep a copy of command line */
+	*cmdline_p = &command_line[0];
+	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
+
+	/* setup memory defaults from the user config */
+	physical_mem_end = 0;
+	_ramend = CONFIG_MEM_SIZE * 1024 * 1024;
+
+	memset(&bfin_memmap, 0, sizeof(bfin_memmap));
+
+	parse_cmdline_early(&command_line[0]);
+
+	if (physical_mem_end == 0)
+		physical_mem_end = _ramend;
+
+	memory_setup();
+
+	cclk = get_cclk();
+	sclk = get_sclk();
+
+#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
+	if (ANOMALY_05000273 && cclk == sclk)
+		panic("ANOMALY 05000273, SCLK can not be same as CCLK");
+#endif
+
+#ifdef BF561_FAMILY
+	if (ANOMALY_05000266) {
+		bfin_read_IMDMA_D0_IRQ_STATUS();
+		bfin_read_IMDMA_D1_IRQ_STATUS();
+	}
+#endif
+	printk(KERN_INFO "Hardware Trace ");
+	if (bfin_read_TBUFCTL() & 0x1)
+		printk("Active ");
+	else
+		printk("Off ");
+	if (bfin_read_TBUFCTL() & 0x2)
+		printk("and Enabled\n");
+	else
+	printk("and Disabled\n");
+
+#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
+	/* we need to initialize the Flashrom device here since we might
+	 * do things with flash early on in the boot
+	 */
+	flash_probe();
+#endif
+
 	_bfin_swrst = bfin_read_SWRST();
 
 	if (_bfin_swrst & RESET_DOUBLE)
@@ -335,7 +679,7 @@ void __init setup_arch(char **cmdline_p)
 	else if (_bfin_swrst & RESET_SOFTWARE)
 		printk(KERN_NOTICE "Reset caused by Software reset\n");
 
-	printk(KERN_INFO "Blackfin support (C) 2004-2007 Analog Devices, Inc.\n");
+	printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n");
 	if (bfin_compiled_revid() == 0xffff)
 		printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
 	else if (bfin_compiled_revid() == -1)
@@ -361,55 +705,8 @@ void __init setup_arch(char **cmdline_p)
 	if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
 		printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
 
-	printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
-	printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
-
-	printk(KERN_INFO "Memory map:\n"
-	       KERN_INFO "  text      = 0x%p-0x%p\n"
-	       KERN_INFO "  rodata    = 0x%p-0x%p\n"
-	       KERN_INFO "  data      = 0x%p-0x%p\n"
-	       KERN_INFO "    stack   = 0x%p-0x%p\n"
-	       KERN_INFO "  init      = 0x%p-0x%p\n"
-	       KERN_INFO "  bss       = 0x%p-0x%p\n"
-	       KERN_INFO "  available = 0x%p-0x%p\n"
-#ifdef CONFIG_MTD_UCLINUX
-	       KERN_INFO "  rootfs    = 0x%p-0x%p\n"
-#endif
-#if DMA_UNCACHED_REGION > 0
-	       KERN_INFO "  DMA Zone  = 0x%p-0x%p\n"
-#endif
-	       , _stext, _etext,
-	       __start_rodata, __end_rodata,
-	       _sdata, _edata,
-	       (void *)&init_thread_union, (void *)((int)(&init_thread_union) + 0x2000),
-	       __init_begin, __init_end,
-	       __bss_start, __bss_stop,
-	       (void *)_ramstart, (void *)memory_end
-#ifdef CONFIG_MTD_UCLINUX
-	       , (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size)
-#endif
-#if DMA_UNCACHED_REGION > 0
-	       , (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend)
-#endif
-	       );
+	setup_bootmem_allocator();
 
-	/*
-	 * give all the memory to the bootmap allocator,  tell it to put the
-	 * boot mem_map at the start of memory
-	 */
-	bootmap_size = init_bootmem_node(NODE_DATA(0), memory_start >> PAGE_SHIFT,	/* map goes here */
-					 PAGE_OFFSET >> PAGE_SHIFT,
-					 memory_end >> PAGE_SHIFT);
-	/*
-	 * free the usable memory,  we have to make sure we do not free
-	 * the bootmem bitmap so we then reserve it after freeing it :-)
-	 */
-	free_bootmem(memory_start, memory_end - memory_start);
-
-	reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
-	/*
-	 * get kmalloc into gear
-	 */
 	paging_init();
 
 	/* check the size of the l1 area */
@@ -450,15 +747,15 @@ void __init setup_arch(char **cmdline_p)
 
 static int __init topology_init(void)
 {
-#if defined (CONFIG_BF561)
-	static struct cpu cpu[2];
-	register_cpu(&cpu[0], 0);
-	register_cpu(&cpu[1], 1);
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		struct cpu *c = &per_cpu(cpu_devices, cpu);
+
+		register_cpu(c, cpu);
+	}
+
 	return 0;
-#else
-	static struct cpu cpu[1];
-	return register_cpu(cpu, 0);
-#endif
 }
 
 subsys_initcall(topology_init);
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 66b5f3e..58717cb 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -649,7 +649,7 @@ void dump_bfin_process(struct pt_regs *fp)
 	if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
 		printk(KERN_NOTICE "HW Error context\n");
 	else if (context & 0x0020)
-		printk(KERN_NOTICE "Defered Exception context\n");
+		printk(KERN_NOTICE "Deferred Exception context\n");
 	else if (context & 0x3FC0)
 		printk(KERN_NOTICE "Interrupt context\n");
 	else if (context & 0x4000)
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 8587224..aed8325 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -41,6 +41,9 @@ _jiffies = _jiffies_64;
 SECTIONS
 {
 	. = CONFIG_BOOT_LOAD;
+	/* Neither the text, ro_data or bss section need to be aligned
+	 * So pack them back to back
+	 */
 	.text :
 	{
 		__text = .;
@@ -58,22 +61,25 @@ SECTIONS
 		*(__ex_table)
 		___stop___ex_table = .;
 
-		. = ALIGN(4);
 		__etext = .;
 	}
 
-	RO_DATA(PAGE_SIZE)
+	/* Just in case the first read only is a 32-bit access */
+	RO_DATA(4)
+
+	.bss :
+	{
+		. = ALIGN(4);
+		___bss_start = .;
+		*(.bss .bss.*)
+		*(COMMON)
+		___bss_stop = .;
+	}
 
 	.data :
 	{
-		/* make sure the init_task is aligned to the
-		 * kernel thread size so we can locate the kernel
-		 * stack properly and quickly.
-		 */
 		__sdata = .;
-		. = ALIGN(THREAD_SIZE);
-		*(.data.init_task)
-
+		/* This gets done first, so the glob doesn't suck it in */
 		. = ALIGN(32);
 		*(.data.cacheline_aligned)
 
@@ -81,10 +87,22 @@ SECTIONS
 		*(.data.*)
 		CONSTRUCTORS
 
+		/* make sure the init_task is aligned to the
+		 * kernel thread size so we can locate the kernel
+		 * stack properly and quickly.
+		 */
 		. = ALIGN(THREAD_SIZE);
+		*(.init_task.data)
+
 		__edata = .;
 	}
 
+	/* The init section should be last, so when we free it, it goes into
+	 * the general memory pool, and (hopefully) will decrease fragmentation
+	 * a tiny bit. The init section has a _requirement_ that it be
+	 * PAGE_SIZE aligned
+	 */
+	. = ALIGN(PAGE_SIZE);
 	___init_begin = .;
 
 	.init.text :
@@ -179,16 +197,7 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	___init_end = .;
 
-	.bss :
-	{
-		. = ALIGN(4);
-		___bss_start = .;
-		*(.bss .bss.*)
-		*(COMMON)
-		. = ALIGN(4);
-		___bss_stop = .;
-		__end = .;
-	}
+	__end =.;
 
 	STABS_DEBUG
 
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 1795aab..337515f 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -41,7 +41,9 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
+#endif
 #include <asm/cplb.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -517,6 +519,14 @@ static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
 	.bits_per_word = 16,
 };
 #endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -634,6 +644,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_0,
 	},
 #endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
 };
 
 /* SPI controller data */
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 4026c2f..2b09aa3 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -34,7 +34,9 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
+#endif
 #include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
@@ -134,6 +136,13 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 	{
@@ -168,6 +177,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
 };
 
 /* SPI (0) */
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 0185350..a645f6f 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -226,6 +226,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 	{
@@ -312,6 +319,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_2,
 	},
 #endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
 };
 
 /* SPI (0) */
@@ -423,9 +439,9 @@ static struct platform_device bfin_pata_device = {
 #include <linux/gpio_keys.h>
 
 static struct gpio_keys_button bfin_gpio_keys_table[] = {
-	{BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"},
-	{BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"},
-	{BTN_2, GPIO_PF8, 1, "gpio-keys: BTN2"},
+	{BTN_0, GPIO_PF5, 0, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PF6, 0, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PF8, 0, "gpio-keys: BTN2"},
 };
 
 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 119e6ea..9e2277e 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -487,6 +487,13 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 };
 #endif
 
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -593,6 +600,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &spi_ad7877_chip_info,
 	},
 #endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
 };
 
 /* SPI controller data */
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 14860f0..916e963 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -37,7 +37,9 @@
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
+#endif
 #include <asm/bfin5xx_spi.h>
 #include <asm/cplb.h>
 #include <asm/dma.h>
@@ -420,6 +422,13 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 };
 #endif
 
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 static struct spi_board_info bf54x_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -445,6 +454,15 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = {
 	.controller_data = &spi_ad7877_chip_info,
 },
 #endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
 };
 
 /* SPI (0) */
@@ -631,7 +649,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&ezkit_flash_device,
 };
 
-static int __init stamp_init(void)
+static int __init ezkit_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
 	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
@@ -644,4 +662,4 @@ static int __init stamp_init(void)
 	return 0;
 }
 
-arch_initcall(stamp_init);
+arch_initcall(ezkit_init);
diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c
index 957bf13..374803a 100644
--- a/arch/blackfin/mach-bf548/dma.c
+++ b/arch/blackfin/mach-bf548/dma.c
@@ -1,5 +1,5 @@
 /*
- * File:         arch/blackfin/mach-bf561/dma.c
+ * File:         arch/blackfin/mach-bf548/dma.c
  * Based on:
  * Author:
  *
@@ -7,7 +7,7 @@
  * Description:  This file contains the simple DMA Implementation for Blackfin
  *
  * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
+ *               Copyright 2004-2008 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index ed863ce..43c1b09 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -92,6 +92,68 @@ void __exit bfin_isp1761_exit(void)
 arch_initcall(bfin_isp1761_init);
 #endif
 
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x2c060000,
+		.end = 0x2c060000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x2c060004,
+		.end = 0x2c060004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF8,
+		.end = IRQ_PF8,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x2C000000,
+		.end = 0x2C000000 + 0x7F,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF10,
+		.end = IRQ_PF10,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
 /*
  *  USB-LAN EzExtender board
  *  Driver needs to know address, irq and flag pin.
@@ -204,6 +266,13 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.bits_per_word = 16,
 };
 #endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
 #endif
 
 /* SPI (0) */
@@ -248,6 +317,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
 };
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
@@ -340,6 +418,10 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&ax88180_device,
 #endif
 
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 #endif
@@ -359,6 +441,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 	&i2c_gpio_device,
 #endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+
 	&ezkit_flash_device,
 };
 
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 8636d42..15e33ca 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -4,8 +4,6 @@
 
 obj-y := \
 	cache.o cacheinit.o entry.o \
-	interrupt.o lock.o irqpanic.o arch_checks.o
+	interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o
 
-obj-$(CONFIG_BFIN_SINGLE_CORE)   += ints-priority-sc.o
-obj-$(CONFIG_BFIN_DUAL_CORE)     += ints-priority-dc.o
 obj-$(CONFIG_PM)                 += pm.o dpmc.o
diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S
index b82c096e..b80ddd8 100644
--- a/arch/blackfin/mach-common/dpmc.S
+++ b/arch/blackfin/mach-common/dpmc.S
@@ -191,6 +191,9 @@ ENTRY(_sleep_mode)
 	call _test_pll_locked;
 
 	R0 = IWR_ENABLE(0);
+	R1 = IWR_DISABLE_ALL;
+	R2 = IWR_DISABLE_ALL;
+
 	call _set_sic_iwr;
 
 	P0.H = hi(PLL_CTL);
@@ -237,6 +240,10 @@ ENTRY(_deep_sleep)
 
 	CLI R4;
 
+	R0 = IWR_ENABLE(0);
+	R1 = IWR_DISABLE_ALL;
+	R2 = IWR_DISABLE_ALL;
+
 	call _set_sic_iwr;
 
 	call _set_dram_srfs;
@@ -261,6 +268,9 @@ ENTRY(_deep_sleep)
 	call _test_pll_locked;
 
 	R0 = IWR_ENABLE(0);
+	R1 = IWR_DISABLE_ALL;
+	R2 = IWR_DISABLE_ALL;
+
 	call _set_sic_iwr;
 
 	P0.H = hi(PLL_CTL);
@@ -286,7 +296,13 @@ ENTRY(_sleep_deeper)
 	CLI R4;
 
 	P3 = R0;
+	P4 = R1;
+	P5 = R2;
+
 	R0 = IWR_ENABLE(0);
+	R1 = IWR_DISABLE_ALL;
+	R2 = IWR_DISABLE_ALL;
+
 	call _set_sic_iwr;
 	call _set_dram_srfs;	/* Set SDRAM Self Refresh */
 
@@ -327,6 +343,8 @@ ENTRY(_sleep_deeper)
 	call _test_pll_locked;
 
 	R0 = P3;
+	R1 = P4;
+	R3 = P5;
 	call _set_sic_iwr;	/* Set Awake from IDLE */
 
 	P0.H = hi(PLL_CTL);
@@ -340,6 +358,9 @@ ENTRY(_sleep_deeper)
 	call _test_pll_locked;
 
 	R0 = IWR_ENABLE(0);
+	R1 = IWR_DISABLE_ALL;
+	R2 = IWR_DISABLE_ALL;
+
 	call _set_sic_iwr;	/* Set Awake from IDLE PLL */
 
 	P0.H = hi(VR_CTL);
@@ -417,14 +438,23 @@ ENTRY(_unset_dram_srfs)
 	RTS;
 
 ENTRY(_set_sic_iwr)
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
 	P0.H = hi(SIC_IWR0);
 	P0.L = lo(SIC_IWR0);
+	P1.H = hi(SIC_IWR1);
+	P1.L = lo(SIC_IWR1);
+	[P1] = R1;
+#if defined(CONFIG_BF54x)
+	P1.H = hi(SIC_IWR2);
+	P1.L = lo(SIC_IWR2);
+	[P1] = R2;
+#endif
 #else
 	P0.H = hi(SIC_IWR);
 	P0.L = lo(SIC_IWR);
 #endif
 	[P0] = R0;
+
 	SSYNC;
 	RTS;
 
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index fdd9bf4..2cbb7a0 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -121,6 +121,7 @@ ENTRY(_ex_icplb_miss)
 	(R7:6,P5:4) = [sp++];
 	ASTAT = [sp++];
 	SAVE_ALL_SYS
+	DEBUG_HWTRACE_SAVE(p5, r7)
 #ifdef CONFIG_MPU
 	R0 = SEQSTAT;
 	R1 = SP;
@@ -132,14 +133,13 @@ ENTRY(_ex_icplb_miss)
 #else
 	call __cplb_hdr;
 #endif
-	DEBUG_START_HWTRACE(p5, r7)
+	DEBUG_HWTRACE_RESTORE(p5, r7)
 	RESTORE_ALL_SYS
 	SP = EX_SCRATCH_REG;
 	rtx;
 ENDPROC(_ex_icplb_miss)
 
 ENTRY(_ex_syscall)
-	DEBUG_START_HWTRACE(p5, r7)
 	(R7:6,P5:4) = [sp++];
 	ASTAT = [sp++];
 	raise 15;		/* invoked by TRAP #0, for sys call */
@@ -178,7 +178,6 @@ ENTRY(_ex_single_step)
 ENDPROC(_ex_single_step)
 
 ENTRY(_bfin_return_from_exception)
-	DEBUG_START_HWTRACE(p5, r7)
 #if ANOMALY_05000257
 	R7=LC0;
 	LC0=R7;
@@ -200,10 +199,9 @@ ENTRY(_handle_bad_cplb)
 	 * need to make a CPLB exception look like a normal exception
 	 */
 
-	DEBUG_START_HWTRACE(p5, r7)
 	RESTORE_ALL_SYS
 	[--sp] = ASTAT;
-	[--sp] = (R7:6, P5:4);
+	[--sp] = (R7:6,P5:4);
 
 ENTRY(_ex_replaceable)
 	nop;
@@ -253,7 +251,6 @@ ENTRY(_ex_trap_c)
 	R6 = SEQSTAT;
 	[P5] = R6;
 
-	DEBUG_START_HWTRACE(p5, r7)
 	(R7:6,P5:4) = [sp++];
 	ASTAT = [sp++];
 	SP = EX_SCRATCH_REG;
@@ -382,8 +379,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	sp.h = _exception_stack_top;
 	/* Try to deal with syscalls quickly.  */
 	[--sp] = ASTAT;
-	[--sp] = (R7:6, P5:4);
-	DEBUG_STOP_HWTRACE(p5, r7)
+	[--sp] = (R7:6,P5:4);
 	r7 = SEQSTAT;		/* reason code is in bit 5:0 */
 	r6.l = lo(SEQSTAT_EXCAUSE);
 	r6.h = hi(SEQSTAT_EXCAUSE);
diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c
deleted file mode 100644
index 8d18d6b..0000000
--- a/arch/blackfin/mach-common/ints-priority-dc.c
+++ /dev/null
@@ -1,484 +0,0 @@
-/*
- * File:         arch/blackfin/mach-common/ints-priority-dc.c
- * Based on:
- * Author:
- *
- * Created:      ?
- * Description:  Set up the interrupt priorities
- *
- * Modified:
- *               1996 Roman Zippel
- *               1999 D. Jeff Dionne <jeff@uclinux.org>
- *               2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
- *               2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
- *               2003 Metrowerks/Motorola
- *               2003 Bas Vermeulen <bas@buyways.nl>
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/module.h>
-#include <linux/kernel_stat.h>
-#include <linux/seq_file.h>
-#include <linux/irq.h>
-#ifdef CONFIG_KGDB
-#include <linux/kgdb.h>
-#endif
-#include <asm/traps.h>
-#include <asm/blackfin.h>
-#include <asm/gpio.h>
-#include <asm/irq_handler.h>
-
-/*
- * NOTES:
- * - we have separated the physical Hardware interrupt from the
- * levels that the LINUX kernel sees (see the description in irq.h)
- * -
- */
-
-/* Initialize this to an actual value to force it into the .data
- * section so that we know it is properly initialized at entry into
- * the kernel but before bss is initialized to zero (which is where
- * it would live otherwise).  The 0x1f magic represents the IRQs we
- * cannot actually mask out in hardware.
- */
-unsigned long irq_flags = 0x1f;
-
-/* The number of spurious interrupts */
-atomic_t num_spurious;
-
-struct ivgx {
-	/* irq number for request_irq, available in mach-bf561/irq.h */
-	int irqno;
-	/* corresponding bit in the SICA_ISR0 register */
-	int isrflag0;
-	/* corresponding bit in the SICA_ISR1 register */
-	int isrflag1;
-} ivg_table[NR_PERI_INTS];
-
-struct ivg_slice {
-	/* position of first irq in ivg_table for given ivg */
-	struct ivgx *ifirst;
-	struct ivgx *istop;
-} ivg7_13[IVG13 - IVG7 + 1];
-
-static void search_IAR(void);
-
-/*
- * Search SIC_IAR and fill tables with the irqvalues
- * and their positions in the SIC_ISR register.
- */
-static void __init search_IAR(void)
-{
-	unsigned ivg, irq_pos = 0;
-	for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
-		int irqn;
-
-		ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
-
-		for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
-			int iar_shift = (irqn & 7) * 4;
-			if (ivg ==
-			    (0xf &
-			     bfin_read32((unsigned long *)SICA_IAR0 +
-					 (irqn >> 3)) >> iar_shift)) {
-				ivg_table[irq_pos].irqno = IVG7 + irqn;
-				ivg_table[irq_pos].isrflag0 =
-				    (irqn < 32 ? (1 << irqn) : 0);
-				ivg_table[irq_pos].isrflag1 =
-				    (irqn < 32 ? 0 : (1 << (irqn - 32)));
-				ivg7_13[ivg].istop++;
-				irq_pos++;
-			}
-		}
-	}
-}
-
-/*
- * This is for BF561 internal IRQs
- */
-
-static void ack_noop(unsigned int irq)
-{
-	/* Dummy function.  */
-}
-
-static void bf561_core_mask_irq(unsigned int irq)
-{
-	irq_flags &= ~(1 << irq);
-	if (!irqs_disabled())
-		local_irq_enable();
-}
-
-static void bf561_core_unmask_irq(unsigned int irq)
-{
-	irq_flags |= 1 << irq;
-	/*
-	 * If interrupts are enabled, IMASK must contain the same value
-	 * as irq_flags.  Make sure that invariant holds.  If interrupts
-	 * are currently disabled we need not do anything; one of the
-	 * callers will take care of setting IMASK to the proper value
-	 * when reenabling interrupts.
-	 * local_irq_enable just does "STI irq_flags", so it's exactly
-	 * what we need.
-	 */
-	if (!irqs_disabled())
-		local_irq_enable();
-	return;
-}
-
-static void bf561_internal_mask_irq(unsigned int irq)
-{
-	unsigned long irq_mask;
-	if ((irq - (IRQ_CORETMR + 1)) < 32) {
-		irq_mask = (1 << (irq - (IRQ_CORETMR + 1)));
-		bfin_write_SICA_IMASK0(bfin_read_SICA_IMASK0() & ~irq_mask);
-	} else {
-		irq_mask = (1 << (irq - (IRQ_CORETMR + 1) - 32));
-		bfin_write_SICA_IMASK1(bfin_read_SICA_IMASK1() & ~irq_mask);
-	}
-}
-
-static void bf561_internal_unmask_irq(unsigned int irq)
-{
-	unsigned long irq_mask;
-
-	if ((irq - (IRQ_CORETMR + 1)) < 32) {
-		irq_mask = (1 << (irq - (IRQ_CORETMR + 1)));
-		bfin_write_SICA_IMASK0(bfin_read_SICA_IMASK0() | irq_mask);
-	} else {
-		irq_mask = (1 << (irq - (IRQ_CORETMR + 1) - 32));
-		bfin_write_SICA_IMASK1(bfin_read_SICA_IMASK1() | irq_mask);
-	}
-	SSYNC();
-}
-
-static struct irq_chip bf561_core_irqchip = {
-	.ack = ack_noop,
-	.mask = bf561_core_mask_irq,
-	.unmask = bf561_core_unmask_irq,
-};
-
-static struct irq_chip bf561_internal_irqchip = {
-	.ack = ack_noop,
-	.mask = bf561_internal_mask_irq,
-	.unmask = bf561_internal_unmask_irq,
-};
-
-static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
-static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
-
-static void bf561_gpio_ack_irq(unsigned int irq)
-{
-	u16 gpionr = irq - IRQ_PF0;
-
-	if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
-		set_gpio_data(gpionr, 0);
-		SSYNC();
-	}
-}
-
-static void bf561_gpio_mask_ack_irq(unsigned int irq)
-{
-	u16 gpionr = irq - IRQ_PF0;
-
-	if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
-		set_gpio_data(gpionr, 0);
-		SSYNC();
-	}
-
-	set_gpio_maska(gpionr, 0);
-	SSYNC();
-}
-
-static void bf561_gpio_mask_irq(unsigned int irq)
-{
-	set_gpio_maska(irq - IRQ_PF0, 0);
-	SSYNC();
-}
-
-static void bf561_gpio_unmask_irq(unsigned int irq)
-{
-	set_gpio_maska(irq - IRQ_PF0, 1);
-	SSYNC();
-}
-
-static unsigned int bf561_gpio_irq_startup(unsigned int irq)
-{
-	unsigned int ret;
-	char buf[8];
-	u16 gpionr = irq - IRQ_PF0;
-
-	if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
-		snprintf(buf, sizeof buf, "IRQ %d", irq);
-		ret = gpio_request(gpionr, buf);
-		if (ret)
-			return ret;
-
-	}
-
-	gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
-	bf561_gpio_unmask_irq(irq);
-
-  return ret;
-
-}
-
-static void bf561_gpio_irq_shutdown(unsigned int irq)
-{
-	bf561_gpio_mask_irq(irq);
-	gpio_free(irq - IRQ_PF0);
-	gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0);
-}
-
-static int bf561_gpio_irq_type(unsigned int irq, unsigned int type)
-{
-
-	unsigned int ret;
-	char buf[8];
-	u16 gpionr = irq - IRQ_PF0;
-
-
-		if (type == IRQ_TYPE_PROBE) {
-			/* only probe unenabled GPIO interrupt lines */
-			if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
-				return 0;
-			type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-
-		}
-
-		if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
-			    IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
-
-		if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
-			snprintf(buf, sizeof buf, "IRQ %d", irq);
-			ret = gpio_request(gpionr, buf);
-			if (ret)
-				return ret;
-
-		}
-
-			gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
-		} else {
-			gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
-			return 0;
-		}
-
-
-		set_gpio_dir(gpionr, 0);
-		set_gpio_inen(gpionr, 1);
-
-
-		if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
-			gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
-			set_gpio_edge(gpionr, 1);
-		} else {
-			set_gpio_edge(gpionr, 0);
-			gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
-		}
-
-		if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
-		    == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
-			set_gpio_both(gpionr, 1);
-		else
-			set_gpio_both(gpionr, 0);
-
-		if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
-			set_gpio_polar(gpionr, 1);	/* low or falling edge denoted by one */
-		else
-			set_gpio_polar(gpionr, 0);	/* high or rising edge denoted by zero */
-
-	SSYNC();
-
-	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
-		set_irq_handler(irq, handle_edge_irq);
-	else
-		set_irq_handler(irq, handle_level_irq);
-
-	return 0;
-}
-
-static struct irq_chip bf561_gpio_irqchip = {
-	.ack = bf561_gpio_ack_irq,
-	.mask = bf561_gpio_mask_irq,
-	.mask_ack = bf561_gpio_mask_ack_irq,
-	.unmask = bf561_gpio_unmask_irq,
-	.set_type = bf561_gpio_irq_type,
-	.startup = bf561_gpio_irq_startup,
-	.shutdown = bf561_gpio_irq_shutdown
-};
-
-static void bf561_demux_gpio_irq(unsigned int inta_irq,
-				 struct irq_desc *intb_desc)
-{
-	int irq, flag_d, mask;
-	u16 gpio;
-
-	switch (inta_irq) {
-	case IRQ_PROG0_INTA:
-		irq = IRQ_PF0;
-		break;
-	case IRQ_PROG1_INTA:
-		irq = IRQ_PF16;
-		break;
-	case IRQ_PROG2_INTA:
-		irq = IRQ_PF32;
-		break;
-	default:
-		dump_stack();
-		return;
-	}
-
-	gpio = irq - IRQ_PF0;
-
-		flag_d = get_gpiop_data(gpio);
-		mask = flag_d & (gpio_enabled[gpio_bank(gpio)] &
-			      get_gpiop_maska(gpio));
-
-			do {
-				if (mask & 1) {
-					struct irq_desc *desc = irq_desc + irq;
-					desc->handle_irq(irq, desc);
-				}
-				irq++;
-				mask >>= 1;
-			} while (mask);
-
-
-}
-
-void __init init_exception_vectors(void)
-{
-	SSYNC();
-
-	/* cannot program in software:
-	 * evt0 - emulation (jtag)
-	 * evt1 - reset
-	 */
-	bfin_write_EVT2(evt_nmi);
-	bfin_write_EVT3(trap);
-	bfin_write_EVT5(evt_ivhw);
-	bfin_write_EVT6(evt_timer);
-	bfin_write_EVT7(evt_evt7);
-	bfin_write_EVT8(evt_evt8);
-	bfin_write_EVT9(evt_evt9);
-	bfin_write_EVT10(evt_evt10);
-	bfin_write_EVT11(evt_evt11);
-	bfin_write_EVT12(evt_evt12);
-	bfin_write_EVT13(evt_evt13);
-	bfin_write_EVT14(evt14_softirq);
-	bfin_write_EVT15(evt_system_call);
-	CSYNC();
-}
-
-/*
- * This function should be called during kernel startup to initialize
- * the BFin IRQ handling routines.
- */
-int __init init_arch_irq(void)
-{
-	int irq;
-	unsigned long ilat = 0;
-	/*  Disable all the peripheral intrs  - page 4-29 HW Ref manual */
-	bfin_write_SICA_IMASK0(SIC_UNMASK_ALL);
-	bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
-	SSYNC();
-
-	bfin_write_SICA_IWR0(IWR_ENABLE_ALL);
-	bfin_write_SICA_IWR1(IWR_ENABLE_ALL);
-
-	local_irq_disable();
-
-	init_exception_buff();
-
-	for (irq = 0; irq <= SYS_IRQS; irq++) {
-		if (irq <= IRQ_CORETMR)
-			set_irq_chip(irq, &bf561_core_irqchip);
-		else
-			set_irq_chip(irq, &bf561_internal_irqchip);
-
-		if ((irq != IRQ_PROG0_INTA) &&
-		    (irq != IRQ_PROG1_INTA) &&
-		    (irq != IRQ_PROG2_INTA))
-			set_irq_handler(irq, handle_simple_irq);
-		else
-			set_irq_chained_handler(irq, bf561_demux_gpio_irq);
-	}
-
-	for (irq = IRQ_PF0; irq <= IRQ_PF47; irq++) {
-		set_irq_chip(irq, &bf561_gpio_irqchip);
-		/* if configured as edge, then will be changed to do_edge_IRQ */
-		set_irq_handler(irq, handle_level_irq);
-	}
-
-	bfin_write_IMASK(0);
-	CSYNC();
-	ilat = bfin_read_ILAT();
-	CSYNC();
-	bfin_write_ILAT(ilat);
-	CSYNC();
-
-	printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
-	/* IMASK=xxx is equivalent to STI xx or irq_flags=xx,
-	 * local_irq_enable()
-	 */
-	program_IAR();
-	/* Therefore it's better to setup IARs before interrupts enabled */
-	search_IAR();
-
-	/* Enable interrupts IVG7-15 */
-	irq_flags = irq_flags | IMASK_IVG15 |
-	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
-	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
-
-	return 0;
-}
-
-#ifdef CONFIG_DO_IRQ_L1
-__attribute__((l1_text))
-#endif
-void do_irq(int vec, struct pt_regs *fp)
-{
-	if (vec == EVT_IVTMR_P) {
-		vec = IRQ_CORETMR;
-	} else {
-		struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
-		struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
-		unsigned long sic_status0, sic_status1;
-
-		SSYNC();
-		sic_status0 = bfin_read_SICA_IMASK0() & bfin_read_SICA_ISR0();
-		sic_status1 = bfin_read_SICA_IMASK1() & bfin_read_SICA_ISR1();
-
-		for (;; ivg++) {
-			if (ivg >= ivg_stop) {
-				atomic_inc(&num_spurious);
-				return;
-			} else if ((sic_status0 & ivg->isrflag0) ||
-				   (sic_status1 & ivg->isrflag1))
-				break;
-		}
-		vec = ivg->irqno;
-	}
-	asm_do_IRQ(vec, fp);
-
-#ifdef CONFIG_KGDB
-	kgdb_process_breakpoint();
-#endif
-}
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority.c
index dec42ac..880595a 100644
--- a/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -1,5 +1,5 @@
 /*
- * File:         arch/blackfin/mach-common/ints-priority-sc.c
+ * File:         arch/blackfin/mach-common/ints-priority.c
  * Based on:
  * Author:
  *
@@ -13,7 +13,7 @@
  *               2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
  *               2003 Metrowerks/Motorola
  *               2003 Bas Vermeulen <bas@buyways.nl>
- *               Copyright 2004-2007 Analog Devices Inc.
+ *               Copyright 2004-2008 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -69,6 +69,10 @@ unsigned long irq_flags = 0x1f;
 /* The number of spurious interrupts */
 atomic_t num_spurious;
 
+#ifdef CONFIG_PM
+unsigned long bfin_sic_iwr[3];	/* Up to 3 SIC_IWRx registers */
+#endif
+
 struct ivgx {
 	/* irq number for request_irq, available in mach-bf533/irq.h */
 	unsigned int irqno;
@@ -98,8 +102,7 @@ static void __init search_IAR(void)
 
 		for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
 			int iar_shift = (irqn & 7) * 4;
-				if (ivg ==
-			    (0xf &
+				if (ivg == (0xf &
 #ifndef CONFIG_BF52x
 			     bfin_read32((unsigned long *)SIC_IAR0 +
 					 (irqn >> 3)) >> iar_shift)) {
@@ -179,6 +182,27 @@ static void bfin_internal_unmask_irq(unsigned int irq)
 	SSYNC();
 }
 
+#ifdef CONFIG_PM
+int bfin_internal_set_wake(unsigned int irq, unsigned int state)
+{
+	unsigned bank, bit;
+	unsigned long flags;
+	bank = (irq - (IRQ_CORETMR + 1)) / 32;
+	bit = (irq - (IRQ_CORETMR + 1)) % 32;
+
+	local_irq_save(flags);
+
+	if (state)
+		bfin_sic_iwr[bank] |= (1 << bit);
+	else
+		bfin_sic_iwr[bank] &= ~(1 << bit);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+#endif
+
 static struct irq_chip bfin_core_irqchip = {
 	.ack = ack_noop,
 	.mask = bfin_core_mask_irq,
@@ -189,6 +213,9 @@ static struct irq_chip bfin_internal_irqchip = {
 	.ack = ack_noop,
 	.mask = bfin_internal_mask_irq,
 	.unmask = bfin_internal_unmask_irq,
+#ifdef CONFIG_PM
+	.set_wake = bfin_internal_set_wake,
+#endif
 };
 
 #ifdef BF537_GENERIC_ERROR_INT_DEMUX
@@ -206,8 +233,7 @@ static void bfin_generic_error_mask_irq(unsigned int irq)
 	if (!error_int_mask) {
 		local_irq_disable();
 		bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
-				     ~(1 <<
-				       (IRQ_GENERIC_ERROR -
+				     ~(1 << (IRQ_GENERIC_ERROR -
 					(IRQ_CORETMR + 1))));
 		SSYNC();
 		local_irq_enable();
@@ -232,7 +258,7 @@ static struct irq_chip bfin_generic_error_irqchip = {
 };
 
 static void bfin_demux_error_irq(unsigned int int_err_irq,
-				 struct irq_desc *intb_desc)
+				 struct irq_desc *inta_desc)
 {
 	int irq = 0;
 
@@ -404,16 +430,8 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 		return 0;
 	}
 
+	set_gpio_inen(gpionr, 0);
 	set_gpio_dir(gpionr, 0);
-	set_gpio_inen(gpionr, 1);
-
-	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
-		gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
-		set_gpio_edge(gpionr, 1);
-	} else {
-		set_gpio_edge(gpionr, 0);
-		gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
-	}
 
 	if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
 	    == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
@@ -426,6 +444,18 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 	else
 		set_gpio_polar(gpionr, 0);	/* high or rising edge denoted by zero */
 
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+		set_gpio_edge(gpionr, 1);
+		set_gpio_inen(gpionr, 1);
+		gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+		set_gpio_data(gpionr, 0);
+
+	} else {
+		set_gpio_edge(gpionr, 0);
+		gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+		set_gpio_inen(gpionr, 1);
+	}
+
 	SSYNC();
 
 	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
@@ -436,6 +466,20 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+int bfin_gpio_set_wake(unsigned int irq, unsigned int state)
+{
+	unsigned gpio = irq_to_gpio(irq);
+
+	if (state)
+		gpio_pm_wakeup_request(gpio, PM_WAKE_IGNORE);
+	else
+		gpio_pm_wakeup_free(gpio);
+
+	return 0;
+}
+#endif
+
 static struct irq_chip bfin_gpio_irqchip = {
 	.ack = bfin_gpio_ack_irq,
 	.mask = bfin_gpio_mask_irq,
@@ -443,30 +487,87 @@ static struct irq_chip bfin_gpio_irqchip = {
 	.unmask = bfin_gpio_unmask_irq,
 	.set_type = bfin_gpio_irq_type,
 	.startup = bfin_gpio_irq_startup,
-	.shutdown = bfin_gpio_irq_shutdown
+	.shutdown = bfin_gpio_irq_shutdown,
+#ifdef CONFIG_PM
+	.set_wake = bfin_gpio_set_wake,
+#endif
 };
 
-static void bfin_demux_gpio_irq(unsigned int intb_irq,
-				struct irq_desc *intb_desc)
+static void bfin_demux_gpio_irq(unsigned int inta_irq,
+				struct irq_desc *desc)
 {
-	u16 i;
-	struct irq_desc *desc;
+	unsigned int i, gpio, mask, irq, search = 0;
 
-	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += 16) {
-		int irq = IRQ_PF0 + i;
-		int flag_d = get_gpiop_data(i);
-		int mask =
-		    flag_d & (gpio_enabled[gpio_bank(i)] & get_gpiop_maska(i));
+	switch (inta_irq) {
+#if defined(CONFIG_BF53x)
+	case IRQ_PROG_INTA:
+		irq = IRQ_PF0;
+		search = 1;
+		break;
+# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
+	case IRQ_MAC_RX:
+		irq = IRQ_PH0;
+		break;
+# endif
+#elif defined(CONFIG_BF52x)
+	case IRQ_PORTF_INTA:
+		irq = IRQ_PF0;
+		break;
+	case IRQ_PORTG_INTA:
+		irq = IRQ_PG0;
+		break;
+	case IRQ_PORTH_INTA:
+		irq = IRQ_PH0;
+		break;
+#elif defined(CONFIG_BF561)
+	case IRQ_PROG0_INTA:
+		irq = IRQ_PF0;
+		break;
+	case IRQ_PROG1_INTA:
+		irq = IRQ_PF16;
+		break;
+	case IRQ_PROG2_INTA:
+		irq = IRQ_PF32;
+		break;
+#endif
+	default:
+		BUG();
+		return;
+	}
 
-		while (mask) {
-			if (mask & 1) {
-				desc = irq_desc + irq;
-				desc->handle_irq(irq, desc);
+	if (search) {
+		for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+			irq += i;
+
+			mask = get_gpiop_data(i) &
+				(gpio_enabled[gpio_bank(i)] &
+				get_gpiop_maska(i));
+
+			while (mask) {
+				if (mask & 1) {
+					desc = irq_desc + irq;
+					desc->handle_irq(irq, desc);
+				}
+				irq++;
+				mask >>= 1;
 			}
-			irq++;
-			mask >>= 1;
 		}
+	} else {
+			gpio = irq_to_gpio(irq);
+			mask = get_gpiop_data(gpio) &
+				(gpio_enabled[gpio_bank(gpio)] &
+				get_gpiop_maska(gpio));
+
+			do {
+				if (mask & 1) {
+					desc = irq_desc + irq;
+					desc->handle_irq(irq, desc);
+				}
+				irq++;
+				mask >>= 1;
+			} while (mask);
 	}
+
 }
 
 #else				/* CONFIG_BF54x */
@@ -711,6 +812,74 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+u32 pint_saved_masks[NR_PINT_SYS_IRQS];
+u32 pint_wakeup_masks[NR_PINT_SYS_IRQS];
+
+int bfin_gpio_set_wake(unsigned int irq, unsigned int state)
+{
+	u32 pint_irq;
+	u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+	u32 bank = PINT_2_BANK(pint_val);
+	u32 pintbit = PINT_BIT(pint_val);
+
+	switch (bank) {
+	case 0:
+		pint_irq = IRQ_PINT0;
+		break;
+	case 2:
+		pint_irq = IRQ_PINT2;
+		break;
+	case 3:
+		pint_irq = IRQ_PINT3;
+		break;
+	case 1:
+		pint_irq = IRQ_PINT1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	bfin_internal_set_wake(pint_irq, state);
+
+	if (state)
+		pint_wakeup_masks[bank] |= pintbit;
+	else
+		pint_wakeup_masks[bank] &= ~pintbit;
+
+	return 0;
+}
+
+u32 bfin_pm_setup(void)
+{
+	u32 val, i;
+
+	for (i = 0; i < NR_PINT_SYS_IRQS; i++) {
+		val = pint[i]->mask_clear;
+		pint_saved_masks[i] = val;
+		if (val ^ pint_wakeup_masks[i]) {
+			pint[i]->mask_clear = val;
+			pint[i]->mask_set = pint_wakeup_masks[i];
+		}
+	}
+
+	return 0;
+}
+
+void bfin_pm_restore(void)
+{
+	u32 i, val;
+
+	for (i = 0; i < NR_PINT_SYS_IRQS; i++) {
+		val = pint_saved_masks[i];
+		if (val ^ pint_wakeup_masks[i]) {
+			pint[i]->mask_clear = pint[i]->mask_clear;
+			pint[i]->mask_set = val;
+		}
+	}
+}
+#endif
+
 static struct irq_chip bfin_gpio_irqchip = {
 	.ack = bfin_gpio_ack_irq,
 	.mask = bfin_gpio_mask_irq,
@@ -718,17 +887,19 @@ static struct irq_chip bfin_gpio_irqchip = {
 	.unmask = bfin_gpio_unmask_irq,
 	.set_type = bfin_gpio_irq_type,
 	.startup = bfin_gpio_irq_startup,
-	.shutdown = bfin_gpio_irq_shutdown
+	.shutdown = bfin_gpio_irq_shutdown,
+#ifdef CONFIG_PM
+	.set_wake = bfin_gpio_set_wake,
+#endif
 };
 
-static void bfin_demux_gpio_irq(unsigned int intb_irq,
-				struct irq_desc *intb_desc)
+static void bfin_demux_gpio_irq(unsigned int inta_irq,
+				struct irq_desc *desc)
 {
 	u8 bank, pint_val;
 	u32 request, irq;
-	struct irq_desc *desc;
 
-	switch (intb_irq) {
+	switch (inta_irq) {
 	case IRQ_PINT0:
 		bank = 0;
 		break;
@@ -795,7 +966,7 @@ int __init init_arch_irq(void)
 	int irq;
 	unsigned long ilat = 0;
 	/*  Disable all the peripheral intrs  - page 4-29 HW Ref manual */
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
 	bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
 	bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
 	bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
@@ -812,6 +983,8 @@ int __init init_arch_irq(void)
 
 	local_irq_disable();
 
+	init_exception_buff();
+
 #ifdef CONFIG_BF54x
 # ifdef CONFIG_PINTx_REASSIGN
 	pint[0]->assign = CONFIG_PINT0_ASSIGN;
@@ -874,6 +1047,19 @@ int __init init_arch_irq(void)
 				set_irq_chained_handler(irq,
 							bfin_demux_gpio_irq);
 				break;
+#elif defined(CONFIG_BF561)
+			case IRQ_PROG0_INTA:
+				set_irq_chained_handler(irq,
+							bfin_demux_gpio_irq);
+				break;
+			case IRQ_PROG1_INTA:
+				set_irq_chained_handler(irq,
+							bfin_demux_gpio_irq);
+				break;
+			case IRQ_PROG2_INTA:
+				set_irq_chained_handler(irq,
+							bfin_demux_gpio_irq);
+				break;
 #endif
 			default:
 				set_irq_handler(irq, handle_simple_irq);
@@ -893,11 +1079,8 @@ int __init init_arch_irq(void)
 	}
 #endif
 
-#ifndef CONFIG_BF54x
-	for (irq = IRQ_PF0; irq < NR_IRQS; irq++) {
-#else
-	for (irq = IRQ_PA0; irq < NR_IRQS; irq++) {
-#endif
+	for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++) {
+
 		set_irq_chip(irq, &bfin_gpio_irqchip);
 		/* if configured as edge, then will be changed to do_edge_IRQ */
 		set_irq_handler(irq, handle_level_irq);
@@ -936,7 +1119,7 @@ void do_irq(int vec, struct pt_regs *fp)
 	} else {
 		struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
 		struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
 		unsigned long sic_status[3];
 
 		SSYNC();
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 81930f7..0be805c 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -4,7 +4,7 @@
  * Author:       Cliff Brake <cbrake@accelent.com> Copyright (c) 2001
  *
  * Created:      2001
- * Description:  Power management for the bfin
+ * Description:  Blackfin power management
  *
  * Modified:     Nicolas Pitre - PXA250 support
  *                Copyright (c) 2002 Monta Vista Software, Inc.
@@ -12,7 +12,7 @@
  *                Copyright (c) 2002 Monta Vista Software, Inc.
  *               Dirk Behme <dirk.behme@de.bosch.com> - OMAP1510/1610
  *                Copyright 2004
- *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2004-2008 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -67,42 +67,30 @@ void bfin_pm_suspend_standby_enter(void)
 	gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
 #endif
 
-#if defined(CONFIG_PM_WAKEUP_BY_GPIO) || defined(CONFIG_PM_WAKEUP_GPIO_API)
-	{
-		u32 flags;
+	u32 flags;
 
-		local_irq_save(flags);
+	local_irq_save(flags);
+	bfin_pm_setup();
 
-		sleep_deeper(gpio_pm_setup()); /*Goto Sleep*/
-
-		gpio_pm_restore();
-
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
-		bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
-		bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
-# ifdef CONFIG_BF54x
-		bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
-# endif
+#ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
+	sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
 #else
-		bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+	sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
 #endif
 
-		local_irq_restore(flags);
-	}
-#endif
+	bfin_pm_restore();
 
-#if defined(CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR)
-	sleep_deeper(CONFIG_PM_WAKEUP_SIC_IWR);
-# if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
 	bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
 	bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
-#  ifdef CONFIG_BF54x
+# ifdef CONFIG_BF54x
 	bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
-#  endif
-# else
-	bfin_write_SIC_IWR(IWR_ENABLE_ALL);
 # endif
-#endif				/* CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR */
+#else
+	bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+#endif
+
+	local_irq_restore(flags);
 }
 
 /*
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index eb1a12a..1f516c5 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -138,8 +138,7 @@ void __init mem_init(void)
 
 	start_mem = PAGE_ALIGN(start_mem);
 	max_mapnr = num_physpages = MAP_NR(high_memory);
-	printk(KERN_INFO "Kernel managed physical pages: %lu\n",
-		num_physpages);
+	printk(KERN_DEBUG "Kernel managed physical pages: %lu\n", num_physpages);
 
 	/* This will put all memory onto the freelists. */
 	totalram_pages = free_all_bootmem();
@@ -153,8 +152,7 @@ void __init mem_init(void)
 	/* do not count in kernel image between _rambase and _ramstart */
 	reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT;
 #if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
-	reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >>
-				PAGE_SHIFT;
+	reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> PAGE_SHIFT;
 #endif
 
 	codek = (_etext - _stext) >> 10;
@@ -163,11 +161,9 @@ void __init mem_init(void)
 
 	printk(KERN_INFO
 	     "Memory available: %luk/%luk RAM, "
-		"(%uk init code, %uk kernel code, "
-		"%uk data, %uk dma, %uk reserved)\n",
+		"(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n",
 		(unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10,
-		initk, codek, datak, DMA_UNCACHED_REGION >> 10,
-		(reservedpages << (PAGE_SHIFT-10)));
+		initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10)));
 
 	/* Initialize the blackfin L1 Memory. */
 	l1sram_init();
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index 6ae0619..5dba3a7 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -70,6 +70,7 @@ extern void program_IAR(void);
 extern void evt14_softirq(void);
 extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
 extern void bfin_gpio_interrupt_setup(int irq, int irq_pfx, int type);
+extern int bfin_internal_set_wake(unsigned int irq, unsigned int state);
 
 extern asmlinkage void finish_atomic_sections (struct pt_regs *regs);
 extern char fixed_code_start;
@@ -121,6 +122,7 @@ extern unsigned long dpdt_swapcount_table[];
 
 extern unsigned long table_start, table_end;
 
+extern unsigned long bfin_sic_iwr[];
 extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
 extern struct file_operations dpmc_fops;
 extern char _start;
diff --git a/include/asm-blackfin/bfin5xx_spi.h b/include/asm-blackfin/bfin5xx_spi.h
index 1a0b57f..9fa1915 100644
--- a/include/asm-blackfin/bfin5xx_spi.h
+++ b/include/asm-blackfin/bfin5xx_spi.h
@@ -1,6 +1,6 @@
 /************************************************************
-*
-* Copyright (C) 2004, Analog Devices. All Rights Reserved
+
+* Copyright (C) 2006-2008, Analog Devices. All Rights Reserved
 *
 * FILE bfin5xx_spi.h
 * PROGRAMMER(S): Luke Yang (Analog Devices Inc.)
@@ -32,42 +32,6 @@
 #define SPI_BAUD_OFF            0x14
 #define SPI_SHAW_OFF            0x18
 
-#define CMD_SPI_OUT_ENABLE    1
-#define CMD_SPI_SET_BAUDRATE  2
-#define CMD_SPI_SET_POLAR     3
-#define CMD_SPI_SET_PHASE     4
-#define CMD_SPI_SET_MASTER    5
-#define CMD_SPI_SET_SENDOPT   6
-#define CMD_SPI_SET_RECVOPT   7
-#define CMD_SPI_SET_ORDER     8
-#define CMD_SPI_SET_LENGTH16  9
-#define CMD_SPI_GET_STAT      11
-#define CMD_SPI_GET_CFG       12
-#define CMD_SPI_SET_CSAVAIL   13
-#define CMD_SPI_SET_CSHIGH    14	/* CS unavail */
-#define CMD_SPI_SET_CSLOW     15	/* CS avail */
-#define CMD_SPI_MISO_ENABLE   16
-#define CMD_SPI_SET_CSENABLE  17
-#define CMD_SPI_SET_CSDISABLE 18
-
-#define CMD_SPI_SET_TRIGGER_MODE  19
-#define CMD_SPI_SET_TRIGGER_SENSE 20
-#define CMD_SPI_SET_TRIGGER_EDGE  21
-#define CMD_SPI_SET_TRIGGER_LEVEL 22
-
-#define CMD_SPI_SET_TIME_SPS 	  23
-#define CMD_SPI_SET_TIME_SAMPLES  24
-#define CMD_SPI_GET_SYSTEMCLOCK   25
-
-#define CMD_SPI_SET_WRITECONTINUOUS     26
-#define CMD_SPI_SET_SKFS    		27
-
-#define CMD_SPI_GET_ALLCONFIG 32	/* For debug */
-
-#define SPI_DEFAULT_BARD    0x0100
-
-#define SPI0_IRQ_NUM        IRQ_SPI
-#define SPI_ERR_TRIG	   -1
 
 #define BIT_CTL_ENABLE      0x4000
 #define BIT_CTL_OPENDRAIN   0x2000
@@ -148,6 +112,10 @@
 #define CFG_SPI_CS6VALUE    6
 #define CFG_SPI_CS7VALUE    7
 
+#define CMD_SPI_SET_BAUDRATE  2
+#define CMD_SPI_GET_SYSTEMCLOCK   25
+#define CMD_SPI_SET_WRITECONTINUOUS     26
+
 /* device.platform_data for SSP controller devices */
 struct bfin5xx_spi_master {
 	u16 num_chipselect;
diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h
index f162edb..686cf83 100644
--- a/include/asm-blackfin/dpmc.h
+++ b/include/asm-blackfin/dpmc.h
@@ -53,10 +53,10 @@ unsigned long get_pll_status(void);
 void change_baud(int baud);
 void fullon_mode(void);
 void active_mode(void);
-void sleep_mode(u32 sic_iwr);
-void deep_sleep(u32 sic_iwr);
-void hibernate_mode(u32 sic_iwr);
-void sleep_deeper(u32 sic_iwr);
+void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void deep_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
 void program_wdog_timer(unsigned long);
 void unmask_wdog_wakeup_evt(void);
 void clear_wdog_wakeup_evt(void);
diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
index d0426c1..27ff532 100644
--- a/include/asm-blackfin/gpio.h
+++ b/include/asm-blackfin/gpio.h
@@ -376,16 +376,19 @@ struct gpio_port_t {
 #endif
 
 #ifdef CONFIG_PM
+unsigned int bfin_pm_setup(void);
+void bfin_pm_restore(void);
+
+#ifndef CONFIG_BF54x
 #define PM_WAKE_RISING	0x1
 #define PM_WAKE_FALLING	0x2
 #define PM_WAKE_HIGH	0x4
 #define PM_WAKE_LOW	0x8
 #define PM_WAKE_BOTH_EDGES	(PM_WAKE_RISING | PM_WAKE_FALLING)
+#define PM_WAKE_IGNORE	0xF0
 
 int gpio_pm_wakeup_request(unsigned gpio, unsigned char type);
 void gpio_pm_wakeup_free(unsigned gpio);
-unsigned int gpio_pm_setup(void);
-void gpio_pm_restore(void);
 
 struct gpio_port_s {
 	unsigned short data;
@@ -409,6 +412,7 @@ struct gpio_port_s {
 	unsigned short fer;
 	unsigned short reserved;
 };
+#endif /*CONFIG_BF54x*/
 #endif /*CONFIG_PM*/
 
 /***********************************************************
diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h
index 19e84dd..3bd67da 100644
--- a/include/asm-blackfin/mach-bf548/blackfin.h
+++ b/include/asm-blackfin/mach-bf548/blackfin.h
@@ -46,6 +46,10 @@
 #include "defBF544.h"
 #endif
 
+#ifdef CONFIG_BF547
+#include "defBF547.h"
+#endif
+
 #ifdef CONFIG_BF548
 #include "defBF548.h"
 #endif
@@ -58,10 +62,12 @@
 #ifdef CONFIG_BF542
 #include "cdefBF542.h"
 #endif
-
 #ifdef CONFIG_BF544
 #include "cdefBF544.h"
 #endif
+#ifdef CONFIG_BF547
+#include "cdefBF547.h"
+#endif
 #ifdef CONFIG_BF548
 #include "cdefBF548.h"
 #endif
diff --git a/include/asm-blackfin/mach-bf548/cdefBF547.h b/include/asm-blackfin/mach-bf548/cdefBF547.h
new file mode 100644
index 0000000..d0a200b
--- /dev/null
+++ b/include/asm-blackfin/mach-bf548/cdefBF547.h
@@ -0,0 +1,865 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/cdefBF547.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF548_H
+#define _CDEF_BF548_H
+
+/* include all Core registers and bit definitions */
+#include "defBF548.h"
+
+/* include core sbfin_read_()ecific register pointer definitions */
+#include <asm/mach-common/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
+
+/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
+#include "cdefBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
+
+/* Timer Registers */
+
+#define bfin_read_TIMER8_CONFIG()	bfin_read16(TIMER8_CONFIG)
+#define bfin_write_TIMER8_CONFIG(val)	bfin_write16(TIMER8_CONFIG, val)
+#define bfin_read_TIMER8_COUNTER()	bfin_read32(TIMER8_COUNTER)
+#define bfin_write_TIMER8_COUNTER(val)	bfin_write32(TIMER8_COUNTER, val)
+#define bfin_read_TIMER8_PERIOD()	bfin_read32(TIMER8_PERIOD)
+#define bfin_write_TIMER8_PERIOD(val)	bfin_write32(TIMER8_PERIOD, val)
+#define bfin_read_TIMER8_WIDTH()	bfin_read32(TIMER8_WIDTH)
+#define bfin_write_TIMER8_WIDTH(val)	bfin_write32(TIMER8_WIDTH, val)
+#define bfin_read_TIMER9_CONFIG()	bfin_read16(TIMER9_CONFIG)
+#define bfin_write_TIMER9_CONFIG(val)	bfin_write16(TIMER9_CONFIG, val)
+#define bfin_read_TIMER9_COUNTER()	bfin_read32(TIMER9_COUNTER)
+#define bfin_write_TIMER9_COUNTER(val)	bfin_write32(TIMER9_COUNTER, val)
+#define bfin_read_TIMER9_PERIOD()	bfin_read32(TIMER9_PERIOD)
+#define bfin_write_TIMER9_PERIOD(val)	bfin_write32(TIMER9_PERIOD, val)
+#define bfin_read_TIMER9_WIDTH()	bfin_read32(TIMER9_WIDTH)
+#define bfin_write_TIMER9_WIDTH(val)	bfin_write32(TIMER9_WIDTH, val)
+#define bfin_read_TIMER10_CONFIG()	bfin_read16(TIMER10_CONFIG)
+#define bfin_write_TIMER10_CONFIG(val)	bfin_write16(TIMER10_CONFIG, val)
+#define bfin_read_TIMER10_COUNTER()	bfin_read32(TIMER10_COUNTER)
+#define bfin_write_TIMER10_COUNTER(val)	bfin_write32(TIMER10_COUNTER, val)
+#define bfin_read_TIMER10_PERIOD()	bfin_read32(TIMER10_PERIOD)
+#define bfin_write_TIMER10_PERIOD(val)	bfin_write32(TIMER10_PERIOD, val)
+#define bfin_read_TIMER10_WIDTH()	bfin_read32(TIMER10_WIDTH)
+#define bfin_write_TIMER10_WIDTH(val)	bfin_write32(TIMER10_WIDTH, val)
+
+/* Timer Groubfin_read_() of 3 */
+
+#define bfin_read_TIMER_ENABLE1()	bfin_read16(TIMER_ENABLE1)
+#define bfin_write_TIMER_ENABLE1(val)	bfin_write16(TIMER_ENABLE1, val)
+#define bfin_read_TIMER_DISABLE1()	bfin_read16(TIMER_DISABLE1)
+#define bfin_write_TIMER_DISABLE1(val)	bfin_write16(TIMER_DISABLE1, val)
+#define bfin_read_TIMER_STATUS1()	bfin_read32(TIMER_STATUS1)
+#define bfin_write_TIMER_STATUS1(val)	bfin_write32(TIMER_STATUS1, val)
+
+/* SPORT0 Registers */
+
+#define bfin_read_SPORT0_TCR1()		bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)	bfin_write16(SPORT0_TCR1, val)
+#define bfin_read_SPORT0_TCR2()		bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)	bfin_write16(SPORT0_TCR2, val)
+#define bfin_read_SPORT0_TCLKDIV()	bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)	bfin_write16(SPORT0_TCLKDIV, val)
+#define bfin_read_SPORT0_TFSDIV()	bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)	bfin_write16(SPORT0_TFSDIV, val)
+#define bfin_read_SPORT0_TX()		bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)	bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX()		bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)	bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_RCR1()		bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)	bfin_write16(SPORT0_RCR1, val)
+#define bfin_read_SPORT0_RCR2()		bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)	bfin_write16(SPORT0_RCR2, val)
+#define bfin_read_SPORT0_RCLKDIV()	bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)	bfin_write16(SPORT0_RCLKDIV, val)
+#define bfin_read_SPORT0_RFSDIV()	bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)	bfin_write16(SPORT0_RFSDIV, val)
+#define bfin_read_SPORT0_STAT()		bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)	bfin_write16(SPORT0_STAT, val)
+#define bfin_read_SPORT0_CHNL()		bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)	bfin_write16(SPORT0_CHNL, val)
+#define bfin_read_SPORT0_MCMC1()	bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)	bfin_write16(SPORT0_MCMC1, val)
+#define bfin_read_SPORT0_MCMC2()	bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)	bfin_write16(SPORT0_MCMC2, val)
+#define bfin_read_SPORT0_MTCS0()	bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)	bfin_write32(SPORT0_MTCS0, val)
+#define bfin_read_SPORT0_MTCS1()	bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)	bfin_write32(SPORT0_MTCS1, val)
+#define bfin_read_SPORT0_MTCS2()	bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)	bfin_write32(SPORT0_MTCS2, val)
+#define bfin_read_SPORT0_MTCS3()	bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)	bfin_write32(SPORT0_MTCS3, val)
+#define bfin_read_SPORT0_MRCS0()	bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)	bfin_write32(SPORT0_MRCS0, val)
+#define bfin_read_SPORT0_MRCS1()	bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)	bfin_write32(SPORT0_MRCS1, val)
+#define bfin_read_SPORT0_MRCS2()	bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)	bfin_write32(SPORT0_MRCS2, val)
+#define bfin_read_SPORT0_MRCS3()	bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)	bfin_write32(SPORT0_MRCS3, val)
+
+/* EPPI0 Registers */
+
+#define bfin_read_EPPI0_STATUS()	bfin_read16(EPPI0_STATUS)
+#define bfin_write_EPPI0_STATUS(val)	bfin_write16(EPPI0_STATUS, val)
+#define bfin_read_EPPI0_HCOUNT()	bfin_read16(EPPI0_HCOUNT)
+#define bfin_write_EPPI0_HCOUNT(val)	bfin_write16(EPPI0_HCOUNT, val)
+#define bfin_read_EPPI0_HDELAY()	bfin_read16(EPPI0_HDELAY)
+#define bfin_write_EPPI0_HDELAY(val)	bfin_write16(EPPI0_HDELAY, val)
+#define bfin_read_EPPI0_VCOUNT()	bfin_read16(EPPI0_VCOUNT)
+#define bfin_write_EPPI0_VCOUNT(val)	bfin_write16(EPPI0_VCOUNT, val)
+#define bfin_read_EPPI0_VDELAY()	bfin_read16(EPPI0_VDELAY)
+#define bfin_write_EPPI0_VDELAY(val)	bfin_write16(EPPI0_VDELAY, val)
+#define bfin_read_EPPI0_FRAME()		bfin_read16(EPPI0_FRAME)
+#define bfin_write_EPPI0_FRAME(val)	bfin_write16(EPPI0_FRAME, val)
+#define bfin_read_EPPI0_LINE()		bfin_read16(EPPI0_LINE)
+#define bfin_write_EPPI0_LINE(val)	bfin_write16(EPPI0_LINE, val)
+#define bfin_read_EPPI0_CLKDIV()	bfin_read16(EPPI0_CLKDIV)
+#define bfin_write_EPPI0_CLKDIV(val)	bfin_write16(EPPI0_CLKDIV, val)
+#define bfin_read_EPPI0_CONTROL()	bfin_read32(EPPI0_CONTROL)
+#define bfin_write_EPPI0_CONTROL(val)	bfin_write32(EPPI0_CONTROL, val)
+#define bfin_read_EPPI0_FS1W_HBL()	bfin_read32(EPPI0_FS1W_HBL)
+#define bfin_write_EPPI0_FS1W_HBL(val)	bfin_write32(EPPI0_FS1W_HBL, val)
+#define bfin_read_EPPI0_FS1P_AVPL()	bfin_read32(EPPI0_FS1P_AVPL)
+#define bfin_write_EPPI0_FS1P_AVPL(val)	bfin_write32(EPPI0_FS1P_AVPL, val)
+#define bfin_read_EPPI0_FS2W_LVB()	bfin_read32(EPPI0_FS2W_LVB)
+#define bfin_write_EPPI0_FS2W_LVB(val)	bfin_write32(EPPI0_FS2W_LVB, val)
+#define bfin_read_EPPI0_FS2P_LAVF()	bfin_read32(EPPI0_FS2P_LAVF)
+#define bfin_write_EPPI0_FS2P_LAVF(val)	bfin_write32(EPPI0_FS2P_LAVF, val)
+#define bfin_read_EPPI0_CLIP()		bfin_read32(EPPI0_CLIP)
+#define bfin_write_EPPI0_CLIP(val)	bfin_write32(EPPI0_CLIP, val)
+
+/* UART2 Registers */
+
+#define bfin_read_UART2_DLL()		bfin_read16(UART2_DLL)
+#define bfin_write_UART2_DLL(val)	bfin_write16(UART2_DLL, val)
+#define bfin_read_UART2_DLH()		bfin_read16(UART2_DLH)
+#define bfin_write_UART2_DLH(val)	bfin_write16(UART2_DLH, val)
+#define bfin_read_UART2_GCTL()		bfin_read16(UART2_GCTL)
+#define bfin_write_UART2_GCTL(val)	bfin_write16(UART2_GCTL, val)
+#define bfin_read_UART2_LCR()		bfin_read16(UART2_LCR)
+#define bfin_write_UART2_LCR(val)	bfin_write16(UART2_LCR, val)
+#define bfin_read_UART2_MCR()		bfin_read16(UART2_MCR)
+#define bfin_write_UART2_MCR(val)	bfin_write16(UART2_MCR, val)
+#define bfin_read_UART2_LSR()		bfin_read16(UART2_LSR)
+#define bfin_write_UART2_LSR(val)	bfin_write16(UART2_LSR, val)
+#define bfin_read_UART2_MSR()		bfin_read16(UART2_MSR)
+#define bfin_write_UART2_MSR(val)	bfin_write16(UART2_MSR, val)
+#define bfin_read_UART2_SCR()		bfin_read16(UART2_SCR)
+#define bfin_write_UART2_SCR(val)	bfin_write16(UART2_SCR, val)
+#define bfin_read_UART2_IER_SET()	bfin_read16(UART2_IER_SET)
+#define bfin_write_UART2_IER_SET(val)	bfin_write16(UART2_IER_SET, val)
+#define bfin_read_UART2_IER_CLEAR()	bfin_read16(UART2_IER_CLEAR)
+#define bfin_write_UART2_IER_CLEAR(val)	bfin_write16(UART2_IER_CLEAR, val)
+#define bfin_read_UART2_RBR()		bfin_read16(UART2_RBR)
+#define bfin_write_UART2_RBR(val)	bfin_write16(UART2_RBR, val)
+
+/* Two Wire Interface Registers (TWI1) */
+
+#define bfin_read_TWI1_CLKDIV()			bfin_read16(TWI1_CLKDIV)
+#define bfin_write_TWI1_CLKDIV(val)		bfin_write16(TWI1_CLKDIV, val)
+#define bfin_read_TWI1_CONTROL()		bfin_read16(TWI1_CONTROL)
+#define bfin_write_TWI1_CONTROL(val)		bfin_write16(TWI1_CONTROL, val)
+#define bfin_read_TWI1_SLAVE_CTRL()		bfin_read16(TWI1_SLAVE_CTRL)
+#define bfin_write_TWI1_SLAVE_CTRL(val)		bfin_write16(TWI1_SLAVE_CTRL, val)
+#define bfin_read_TWI1_SLAVE_STAT()		bfin_read16(TWI1_SLAVE_STAT)
+#define bfin_write_TWI1_SLAVE_STAT(val)		bfin_write16(TWI1_SLAVE_STAT, val)
+#define bfin_read_TWI1_SLAVE_ADDR()		bfin_read16(TWI1_SLAVE_ADDR)
+#define bfin_write_TWI1_SLAVE_ADDR(val)		bfin_write16(TWI1_SLAVE_ADDR, val)
+#define bfin_read_TWI1_MASTER_CTRL()		bfin_read16(TWI1_MASTER_CTRL)
+#define bfin_write_TWI1_MASTER_CTRL(val)	bfin_write16(TWI1_MASTER_CTRL, val)
+#define bfin_read_TWI1_MASTER_STAT()		bfin_read16(TWI1_MASTER_STAT)
+#define bfin_write_TWI1_MASTER_STAT(val)	bfin_write16(TWI1_MASTER_STAT, val)
+#define bfin_read_TWI1_MASTER_ADDR()		bfin_read16(TWI1_MASTER_ADDR)
+#define bfin_write_TWI1_MASTER_ADDR(val)	bfin_write16(TWI1_MASTER_ADDR, val)
+#define bfin_read_TWI1_INT_STAT()		bfin_read16(TWI1_INT_STAT)
+#define bfin_write_TWI1_INT_STAT(val)		bfin_write16(TWI1_INT_STAT, val)
+#define bfin_read_TWI1_INT_MASK()		bfin_read16(TWI1_INT_MASK)
+#define bfin_write_TWI1_INT_MASK(val)		bfin_write16(TWI1_INT_MASK, val)
+#define bfin_read_TWI1_FIFO_CTRL()		bfin_read16(TWI1_FIFO_CTRL)
+#define bfin_write_TWI1_FIFO_CTRL(val)		bfin_write16(TWI1_FIFO_CTRL, val)
+#define bfin_read_TWI1_FIFO_STAT()		bfin_read16(TWI1_FIFO_STAT)
+#define bfin_write_TWI1_FIFO_STAT(val)		bfin_write16(TWI1_FIFO_STAT, val)
+#define bfin_read_TWI1_XMT_DATA8()		bfin_read16(TWI1_XMT_DATA8)
+#define bfin_write_TWI1_XMT_DATA8(val)		bfin_write16(TWI1_XMT_DATA8, val)
+#define bfin_read_TWI1_XMT_DATA16()		bfin_read16(TWI1_XMT_DATA16)
+#define bfin_write_TWI1_XMT_DATA16(val)		bfin_write16(TWI1_XMT_DATA16, val)
+#define bfin_read_TWI1_RCV_DATA8()		bfin_read16(TWI1_RCV_DATA8)
+#define bfin_write_TWI1_RCV_DATA8(val)		bfin_write16(TWI1_RCV_DATA8, val)
+#define bfin_read_TWI1_RCV_DATA16()		bfin_read16(TWI1_RCV_DATA16)
+#define bfin_write_TWI1_RCV_DATA16(val)		bfin_write16(TWI1_RCV_DATA16, val)
+
+/* SPI2  Registers */
+
+#define bfin_read_SPI2_CTL()		bfin_read16(SPI2_CTL)
+#define bfin_write_SPI2_CTL(val)	bfin_write16(SPI2_CTL, val)
+#define bfin_read_SPI2_FLG()		bfin_read16(SPI2_FLG)
+#define bfin_write_SPI2_FLG(val)	bfin_write16(SPI2_FLG, val)
+#define bfin_read_SPI2_STAT()		bfin_read16(SPI2_STAT)
+#define bfin_write_SPI2_STAT(val)	bfin_write16(SPI2_STAT, val)
+#define bfin_read_SPI2_TDBR()		bfin_read16(SPI2_TDBR)
+#define bfin_write_SPI2_TDBR(val)	bfin_write16(SPI2_TDBR, val)
+#define bfin_read_SPI2_RDBR()		bfin_read16(SPI2_RDBR)
+#define bfin_write_SPI2_RDBR(val)	bfin_write16(SPI2_RDBR, val)
+#define bfin_read_SPI2_BAUD()		bfin_read16(SPI2_BAUD)
+#define bfin_write_SPI2_BAUD(val)	bfin_write16(SPI2_BAUD, val)
+#define bfin_read_SPI2_SHADOW()		bfin_read16(SPI2_SHADOW)
+#define bfin_write_SPI2_SHADOW(val)	bfin_write16(SPI2_SHADOW, val)
+
+/* ATAPI Registers */
+
+#define bfin_read_ATAPI_CONTROL()		bfin_read16(ATAPI_CONTROL)
+#define bfin_write_ATAPI_CONTROL(val)		bfin_write16(ATAPI_CONTROL, val)
+#define bfin_read_ATAPI_STATUS()		bfin_read16(ATAPI_STATUS)
+#define bfin_write_ATAPI_STATUS(val)		bfin_write16(ATAPI_STATUS, val)
+#define bfin_read_ATAPI_DEV_ADDR()		bfin_read16(ATAPI_DEV_ADDR)
+#define bfin_write_ATAPI_DEV_ADDR(val)		bfin_write16(ATAPI_DEV_ADDR, val)
+#define bfin_read_ATAPI_DEV_TXBUF()		bfin_read16(ATAPI_DEV_TXBUF)
+#define bfin_write_ATAPI_DEV_TXBUF(val)		bfin_write16(ATAPI_DEV_TXBUF, val)
+#define bfin_read_ATAPI_DEV_RXBUF()		bfin_read16(ATAPI_DEV_RXBUF)
+#define bfin_write_ATAPI_DEV_RXBUF(val)		bfin_write16(ATAPI_DEV_RXBUF, val)
+#define bfin_read_ATAPI_INT_MASK()		bfin_read16(ATAPI_INT_MASK)
+#define bfin_write_ATAPI_INT_MASK(val)		bfin_write16(ATAPI_INT_MASK, val)
+#define bfin_read_ATAPI_INT_STATUS()		bfin_read16(ATAPI_INT_STATUS)
+#define bfin_write_ATAPI_INT_STATUS(val)	bfin_write16(ATAPI_INT_STATUS, val)
+#define bfin_read_ATAPI_XFER_LEN()		bfin_read16(ATAPI_XFER_LEN)
+#define bfin_write_ATAPI_XFER_LEN(val)		bfin_write16(ATAPI_XFER_LEN, val)
+#define bfin_read_ATAPI_LINE_STATUS()		bfin_read16(ATAPI_LINE_STATUS)
+#define bfin_write_ATAPI_LINE_STATUS(val)	bfin_write16(ATAPI_LINE_STATUS, val)
+#define bfin_read_ATAPI_SM_STATE()		bfin_read16(ATAPI_SM_STATE)
+#define bfin_write_ATAPI_SM_STATE(val)		bfin_write16(ATAPI_SM_STATE, val)
+#define bfin_read_ATAPI_TERMINATE()		bfin_read16(ATAPI_TERMINATE)
+#define bfin_write_ATAPI_TERMINATE(val)		bfin_write16(ATAPI_TERMINATE, val)
+#define bfin_read_ATAPI_PIO_TFRCNT()		bfin_read16(ATAPI_PIO_TFRCNT)
+#define bfin_write_ATAPI_PIO_TFRCNT(val)	bfin_write16(ATAPI_PIO_TFRCNT, val)
+#define bfin_read_ATAPI_DMA_TFRCNT()		bfin_read16(ATAPI_DMA_TFRCNT)
+#define bfin_write_ATAPI_DMA_TFRCNT(val)	bfin_write16(ATAPI_DMA_TFRCNT, val)
+#define bfin_read_ATAPI_UMAIN_TFRCNT()		bfin_read16(ATAPI_UMAIN_TFRCNT)
+#define bfin_write_ATAPI_UMAIN_TFRCNT(val)	bfin_write16(ATAPI_UMAIN_TFRCNT, val)
+#define bfin_read_ATAPI_UDMAOUT_TFRCNT()	bfin_read16(ATAPI_UDMAOUT_TFRCNT)
+#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val)	bfin_write16(ATAPI_UDMAOUT_TFRCNT, val)
+#define bfin_read_ATAPI_REG_TIM_0()		bfin_read16(ATAPI_REG_TIM_0)
+#define bfin_write_ATAPI_REG_TIM_0(val)		bfin_write16(ATAPI_REG_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_0()		bfin_read16(ATAPI_PIO_TIM_0)
+#define bfin_write_ATAPI_PIO_TIM_0(val)		bfin_write16(ATAPI_PIO_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_1()		bfin_read16(ATAPI_PIO_TIM_1)
+#define bfin_write_ATAPI_PIO_TIM_1(val)		bfin_write16(ATAPI_PIO_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_0()		bfin_read16(ATAPI_MULTI_TIM_0)
+#define bfin_write_ATAPI_MULTI_TIM_0(val)	bfin_write16(ATAPI_MULTI_TIM_0, val)
+#define bfin_read_ATAPI_MULTI_TIM_1()		bfin_read16(ATAPI_MULTI_TIM_1)
+#define bfin_write_ATAPI_MULTI_TIM_1(val)	bfin_write16(ATAPI_MULTI_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_2()		bfin_read16(ATAPI_MULTI_TIM_2)
+#define bfin_write_ATAPI_MULTI_TIM_2(val)	bfin_write16(ATAPI_MULTI_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_0()		bfin_read16(ATAPI_ULTRA_TIM_0)
+#define bfin_write_ATAPI_ULTRA_TIM_0(val)	bfin_write16(ATAPI_ULTRA_TIM_0, val)
+#define bfin_read_ATAPI_ULTRA_TIM_1()		bfin_read16(ATAPI_ULTRA_TIM_1)
+#define bfin_write_ATAPI_ULTRA_TIM_1(val)	bfin_write16(ATAPI_ULTRA_TIM_1, val)
+#define bfin_read_ATAPI_ULTRA_TIM_2()		bfin_read16(ATAPI_ULTRA_TIM_2)
+#define bfin_write_ATAPI_ULTRA_TIM_2(val)	bfin_write16(ATAPI_ULTRA_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_3()		bfin_read16(ATAPI_ULTRA_TIM_3)
+#define bfin_write_ATAPI_ULTRA_TIM_3(val)	bfin_write16(ATAPI_ULTRA_TIM_3, val)
+
+/* SDH Registers */
+
+#define bfin_read_SDH_PWR_CTL()		bfin_read16(SDH_PWR_CTL)
+#define bfin_write_SDH_PWR_CTL(val)	bfin_write16(SDH_PWR_CTL, val)
+#define bfin_read_SDH_CLK_CTL()		bfin_read16(SDH_CLK_CTL)
+#define bfin_write_SDH_CLK_CTL(val)	bfin_write16(SDH_CLK_CTL, val)
+#define bfin_read_SDH_ARGUMENT()	bfin_read32(SDH_ARGUMENT)
+#define bfin_write_SDH_ARGUMENT(val)	bfin_write32(SDH_ARGUMENT, val)
+#define bfin_read_SDH_COMMAND()		bfin_read16(SDH_COMMAND)
+#define bfin_write_SDH_COMMAND(val)	bfin_write16(SDH_COMMAND, val)
+#define bfin_read_SDH_RESP_CMD()	bfin_read16(SDH_RESP_CMD)
+#define bfin_write_SDH_RESP_CMD(val)	bfin_write16(SDH_RESP_CMD, val)
+#define bfin_read_SDH_RESPONSE0()	bfin_read32(SDH_RESPONSE0)
+#define bfin_write_SDH_RESPONSE0(val)	bfin_write32(SDH_RESPONSE0, val)
+#define bfin_read_SDH_RESPONSE1()	bfin_read32(SDH_RESPONSE1)
+#define bfin_write_SDH_RESPONSE1(val)	bfin_write32(SDH_RESPONSE1, val)
+#define bfin_read_SDH_RESPONSE2()	bfin_read32(SDH_RESPONSE2)
+#define bfin_write_SDH_RESPONSE2(val)	bfin_write32(SDH_RESPONSE2, val)
+#define bfin_read_SDH_RESPONSE3()	bfin_read32(SDH_RESPONSE3)
+#define bfin_write_SDH_RESPONSE3(val)	bfin_write32(SDH_RESPONSE3, val)
+#define bfin_read_SDH_DATA_TIMER()	bfin_read32(SDH_DATA_TIMER)
+#define bfin_write_SDH_DATA_TIMER(val)	bfin_write32(SDH_DATA_TIMER, val)
+#define bfin_read_SDH_DATA_LGTH()	bfin_read16(SDH_DATA_LGTH)
+#define bfin_write_SDH_DATA_LGTH(val)	bfin_write16(SDH_DATA_LGTH, val)
+#define bfin_read_SDH_DATA_CTL()	bfin_read16(SDH_DATA_CTL)
+#define bfin_write_SDH_DATA_CTL(val)	bfin_write16(SDH_DATA_CTL, val)
+#define bfin_read_SDH_DATA_CNT()	bfin_read16(SDH_DATA_CNT)
+#define bfin_write_SDH_DATA_CNT(val)	bfin_write16(SDH_DATA_CNT, val)
+#define bfin_read_SDH_STATUS()		bfin_read32(SDH_STATUS)
+#define bfin_write_SDH_STATUS(val)	bfin_write32(SDH_STATUS, val)
+#define bfin_read_SDH_STATUS_CLR()	bfin_read16(SDH_STATUS_CLR)
+#define bfin_write_SDH_STATUS_CLR(val)	bfin_write16(SDH_STATUS_CLR, val)
+#define bfin_read_SDH_MASK0()		bfin_read32(SDH_MASK0)
+#define bfin_write_SDH_MASK0(val)	bfin_write32(SDH_MASK0, val)
+#define bfin_read_SDH_MASK1()		bfin_read32(SDH_MASK1)
+#define bfin_write_SDH_MASK1(val)	bfin_write32(SDH_MASK1, val)
+#define bfin_read_SDH_FIFO_CNT()	bfin_read16(SDH_FIFO_CNT)
+#define bfin_write_SDH_FIFO_CNT(val)	bfin_write16(SDH_FIFO_CNT, val)
+#define bfin_read_SDH_FIFO()		bfin_read32(SDH_FIFO)
+#define bfin_write_SDH_FIFO(val)	bfin_write32(SDH_FIFO, val)
+#define bfin_read_SDH_E_STATUS()	bfin_read16(SDH_E_STATUS)
+#define bfin_write_SDH_E_STATUS(val)	bfin_write16(SDH_E_STATUS, val)
+#define bfin_read_SDH_E_MASK()		bfin_read16(SDH_E_MASK)
+#define bfin_write_SDH_E_MASK(val)	bfin_write16(SDH_E_MASK, val)
+#define bfin_read_SDH_CFG()		bfin_read16(SDH_CFG)
+#define bfin_write_SDH_CFG(val)		bfin_write16(SDH_CFG, val)
+#define bfin_read_SDH_RD_WAIT_EN()	bfin_read16(SDH_RD_WAIT_EN)
+#define bfin_write_SDH_RD_WAIT_EN(val)	bfin_write16(SDH_RD_WAIT_EN, val)
+#define bfin_read_SDH_PID0()		bfin_read16(SDH_PID0)
+#define bfin_write_SDH_PID0(val)	bfin_write16(SDH_PID0, val)
+#define bfin_read_SDH_PID1()		bfin_read16(SDH_PID1)
+#define bfin_write_SDH_PID1(val)	bfin_write16(SDH_PID1, val)
+#define bfin_read_SDH_PID2()		bfin_read16(SDH_PID2)
+#define bfin_write_SDH_PID2(val)	bfin_write16(SDH_PID2, val)
+#define bfin_read_SDH_PID3()		bfin_read16(SDH_PID3)
+#define bfin_write_SDH_PID3(val)	bfin_write16(SDH_PID3, val)
+#define bfin_read_SDH_PID4()		bfin_read16(SDH_PID4)
+#define bfin_write_SDH_PID4(val)	bfin_write16(SDH_PID4, val)
+#define bfin_read_SDH_PID5()		bfin_read16(SDH_PID5)
+#define bfin_write_SDH_PID5(val)	bfin_write16(SDH_PID5, val)
+#define bfin_read_SDH_PID6()		bfin_read16(SDH_PID6)
+#define bfin_write_SDH_PID6(val)	bfin_write16(SDH_PID6, val)
+#define bfin_read_SDH_PID7()		bfin_read16(SDH_PID7)
+#define bfin_write_SDH_PID7(val)	bfin_write16(SDH_PID7, val)
+
+/* HOST Port Registers */
+
+#define bfin_read_HOST_CONTROL()	bfin_read16(HOST_CONTROL)
+#define bfin_write_HOST_CONTROL(val)	bfin_write16(HOST_CONTROL, val)
+#define bfin_read_HOST_STATUS()		bfin_read16(HOST_STATUS)
+#define bfin_write_HOST_STATUS(val)	bfin_write16(HOST_STATUS, val)
+#define bfin_read_HOST_TIMEOUT()	bfin_read16(HOST_TIMEOUT)
+#define bfin_write_HOST_TIMEOUT(val)	bfin_write16(HOST_TIMEOUT, val)
+
+/* USB Control Registers */
+
+#define bfin_read_USB_FADDR()		bfin_read16(USB_FADDR)
+#define bfin_write_USB_FADDR(val)	bfin_write16(USB_FADDR, val)
+#define bfin_read_USB_POWER()		bfin_read16(USB_POWER)
+#define bfin_write_USB_POWER(val)	bfin_write16(USB_POWER, val)
+#define bfin_read_USB_INTRTX()		bfin_read16(USB_INTRTX)
+#define bfin_write_USB_INTRTX(val)	bfin_write16(USB_INTRTX, val)
+#define bfin_read_USB_INTRRX()		bfin_read16(USB_INTRRX)
+#define bfin_write_USB_INTRRX(val)	bfin_write16(USB_INTRRX, val)
+#define bfin_read_USB_INTRTXE()		bfin_read16(USB_INTRTXE)
+#define bfin_write_USB_INTRTXE(val)	bfin_write16(USB_INTRTXE, val)
+#define bfin_read_USB_INTRRXE()		bfin_read16(USB_INTRRXE)
+#define bfin_write_USB_INTRRXE(val)	bfin_write16(USB_INTRRXE, val)
+#define bfin_read_USB_INTRUSB()		bfin_read16(USB_INTRUSB)
+#define bfin_write_USB_INTRUSB(val)	bfin_write16(USB_INTRUSB, val)
+#define bfin_read_USB_INTRUSBE()	bfin_read16(USB_INTRUSBE)
+#define bfin_write_USB_INTRUSBE(val)	bfin_write16(USB_INTRUSBE, val)
+#define bfin_read_USB_FRAME()		bfin_read16(USB_FRAME)
+#define bfin_write_USB_FRAME(val)	bfin_write16(USB_FRAME, val)
+#define bfin_read_USB_INDEX()		bfin_read16(USB_INDEX)
+#define bfin_write_USB_INDEX(val)	bfin_write16(USB_INDEX, val)
+#define bfin_read_USB_TESTMODE()	bfin_read16(USB_TESTMODE)
+#define bfin_write_USB_TESTMODE(val)	bfin_write16(USB_TESTMODE, val)
+#define bfin_read_USB_GLOBINTR()	bfin_read16(USB_GLOBINTR)
+#define bfin_write_USB_GLOBINTR(val)	bfin_write16(USB_GLOBINTR, val)
+#define bfin_read_USB_GLOBAL_CTL()	bfin_read16(USB_GLOBAL_CTL)
+#define bfin_write_USB_GLOBAL_CTL(val)		bfin_write16(USB_GLOBAL_CTL, val)
+
+/* USB Packet Control Registers */
+
+#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
+#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
+#define bfin_read_USB_CSR0()		bfin_read16(USB_CSR0)
+#define bfin_write_USB_CSR0(val)	bfin_write16(USB_CSR0, val)
+#define bfin_read_USB_TXCSR()		bfin_read16(USB_TXCSR)
+#define bfin_write_USB_TXCSR(val)	bfin_write16(USB_TXCSR, val)
+#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
+#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
+#define bfin_read_USB_RXCSR()		bfin_read16(USB_RXCSR)
+#define bfin_write_USB_RXCSR(val)	bfin_write16(USB_RXCSR, val)
+#define bfin_read_USB_COUNT0()		bfin_read16(USB_COUNT0)
+#define bfin_write_USB_COUNT0(val)	bfin_write16(USB_COUNT0, val)
+#define bfin_read_USB_RXCOUNT()		bfin_read16(USB_RXCOUNT)
+#define bfin_write_USB_RXCOUNT(val)	bfin_write16(USB_RXCOUNT, val)
+#define bfin_read_USB_TXTYPE()		bfin_read16(USB_TXTYPE)
+#define bfin_write_USB_TXTYPE(val)	bfin_write16(USB_TXTYPE, val)
+#define bfin_read_USB_NAKLIMIT0()	bfin_read16(USB_NAKLIMIT0)
+#define bfin_write_USB_NAKLIMIT0(val)	bfin_write16(USB_NAKLIMIT0, val)
+#define bfin_read_USB_TXINTERVAL()	bfin_read16(USB_TXINTERVAL)
+#define bfin_write_USB_TXINTERVAL(val)	bfin_write16(USB_TXINTERVAL, val)
+#define bfin_read_USB_RXTYPE()		bfin_read16(USB_RXTYPE)
+#define bfin_write_USB_RXTYPE(val)	bfin_write16(USB_RXTYPE, val)
+#define bfin_read_USB_RXINTERVAL()	bfin_read16(USB_RXINTERVAL)
+#define bfin_write_USB_RXINTERVAL(val)	bfin_write16(USB_RXINTERVAL, val)
+#define bfin_read_USB_TXCOUNT()		bfin_read16(USB_TXCOUNT)
+#define bfin_write_USB_TXCOUNT(val)	bfin_write16(USB_TXCOUNT, val)
+
+/* USB Endbfin_read_()oint FIFO Registers */
+
+#define bfin_read_USB_EP0_FIFO()	bfin_read16(USB_EP0_FIFO)
+#define bfin_write_USB_EP0_FIFO(val)	bfin_write16(USB_EP0_FIFO, val)
+#define bfin_read_USB_EP1_FIFO()	bfin_read16(USB_EP1_FIFO)
+#define bfin_write_USB_EP1_FIFO(val)	bfin_write16(USB_EP1_FIFO, val)
+#define bfin_read_USB_EP2_FIFO()	bfin_read16(USB_EP2_FIFO)
+#define bfin_write_USB_EP2_FIFO(val)	bfin_write16(USB_EP2_FIFO, val)
+#define bfin_read_USB_EP3_FIFO()	bfin_read16(USB_EP3_FIFO)
+#define bfin_write_USB_EP3_FIFO(val)	bfin_write16(USB_EP3_FIFO, val)
+#define bfin_read_USB_EP4_FIFO()	bfin_read16(USB_EP4_FIFO)
+#define bfin_write_USB_EP4_FIFO(val)	bfin_write16(USB_EP4_FIFO, val)
+#define bfin_read_USB_EP5_FIFO()	bfin_read16(USB_EP5_FIFO)
+#define bfin_write_USB_EP5_FIFO(val)	bfin_write16(USB_EP5_FIFO, val)
+#define bfin_read_USB_EP6_FIFO()	bfin_read16(USB_EP6_FIFO)
+#define bfin_write_USB_EP6_FIFO(val)	bfin_write16(USB_EP6_FIFO, val)
+#define bfin_read_USB_EP7_FIFO()	bfin_read16(USB_EP7_FIFO)
+#define bfin_write_USB_EP7_FIFO(val)	bfin_write16(USB_EP7_FIFO, val)
+
+/* USB OTG Control Registers */
+
+#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
+#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
+#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
+#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
+#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
+#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
+
+/* USB Phy Control Registers */
+
+#define bfin_read_USB_LINKINFO()	bfin_read16(USB_LINKINFO)
+#define bfin_write_USB_LINKINFO(val)	bfin_write16(USB_LINKINFO, val)
+#define bfin_read_USB_VPLEN()		bfin_read16(USB_VPLEN)
+#define bfin_write_USB_VPLEN(val)	bfin_write16(USB_VPLEN, val)
+#define bfin_read_USB_HS_EOF1()		bfin_read16(USB_HS_EOF1)
+#define bfin_write_USB_HS_EOF1(val)	bfin_write16(USB_HS_EOF1, val)
+#define bfin_read_USB_FS_EOF1()		bfin_read16(USB_FS_EOF1)
+#define bfin_write_USB_FS_EOF1(val)	bfin_write16(USB_FS_EOF1, val)
+#define bfin_read_USB_LS_EOF1()		bfin_read16(USB_LS_EOF1)
+#define bfin_write_USB_LS_EOF1(val)	bfin_write16(USB_LS_EOF1, val)
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
+#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
+#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
+#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
+#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define bfin_read_USB_PHY_TEST()		bfin_read16(USB_PHY_TEST)
+#define bfin_write_USB_PHY_TEST(val)		bfin_write16(USB_PHY_TEST, val)
+#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
+#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
+#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
+#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
+
+/* USB Endbfin_read_()oint 0 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
+#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
+#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
+#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
+#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
+#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
+#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
+#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
+#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
+#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
+#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
+#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
+#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
+#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
+#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
+#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
+#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 1 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
+#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
+#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
+#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
+#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
+#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
+#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
+#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
+#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
+#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
+#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
+#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
+#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
+#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
+#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
+#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
+#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 2 Control Registers */
+
+#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
+#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
+#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
+#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
+#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
+#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
+#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
+#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
+#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
+#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
+#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
+#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
+#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
+#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
+#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
+#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
+#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 3 Control Registers */
+
+#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
+#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
+#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
+#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
+#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
+#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
+#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
+#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
+#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
+#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
+#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
+#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
+#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
+#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
+#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
+#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
+#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 4 Control Registers */
+
+#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
+#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
+#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
+#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
+#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
+#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
+#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
+#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
+#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
+#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
+#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
+#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
+#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
+#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
+#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
+#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
+#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 5 Control Registers */
+
+#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
+#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
+#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
+#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
+#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
+#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
+#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
+#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
+#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
+#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
+#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
+#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
+#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
+#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
+#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
+#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
+#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 6 Control Registers */
+
+#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
+#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
+#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
+#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
+#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
+#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
+#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
+#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
+#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
+#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
+#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
+#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
+#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
+#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
+#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
+#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
+#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 7 Control Registers */
+
+#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
+#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
+#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
+#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
+#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
+#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
+#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
+#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
+#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
+#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
+#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
+#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
+#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
+#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
+#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
+#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
+#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
+#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
+#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
+#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
+
+/* USB Channel 0 Config Registers */
+
+#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
+#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
+#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
+#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
+#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
+#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
+#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
+#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
+#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
+#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
+
+/* USB Channel 1 Config Registers */
+
+#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
+#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
+#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
+#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
+#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
+#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
+#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
+#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
+#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
+#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
+
+/* USB Channel 2 Config Registers */
+
+#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
+#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
+#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
+#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
+#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
+#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
+#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
+#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
+#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
+#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
+
+/* USB Channel 3 Config Registers */
+
+#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
+#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
+#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
+#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
+#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
+#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
+#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
+#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
+#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
+#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
+
+/* USB Channel 4 Config Registers */
+
+#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
+#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
+#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
+#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
+#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
+#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
+#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
+#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
+#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
+#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
+
+/* USB Channel 5 Config Registers */
+
+#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
+#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
+#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
+#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
+#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
+#define bfin_write_USB_DMA5ADDRHIGH(val)	bfin_write16(USB_DMA5ADDRHIGH, val)
+#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
+#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
+#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
+#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
+
+/* USB Channel 6 Config Registers */
+
+#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
+#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
+#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
+#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
+#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
+#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
+#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
+#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
+#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
+#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
+
+/* USB Channel 7 Config Registers */
+
+#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
+#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
+#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
+#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
+#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
+#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
+#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
+#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
+#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
+#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
+
+/* Keybfin_read_()ad Registers */
+
+#define bfin_read_KPAD_CTL()		bfin_read16(KPAD_CTL)
+#define bfin_write_KPAD_CTL(val)	bfin_write16(KPAD_CTL, val)
+#define bfin_read_KPAD_PRESCALE()	bfin_read16(KPAD_PRESCALE)
+#define bfin_write_KPAD_PRESCALE(val)	bfin_write16(KPAD_PRESCALE, val)
+#define bfin_read_KPAD_MSEL()		bfin_read16(KPAD_MSEL)
+#define bfin_write_KPAD_MSEL(val)	bfin_write16(KPAD_MSEL, val)
+#define bfin_read_KPAD_ROWCOL()		bfin_read16(KPAD_ROWCOL)
+#define bfin_write_KPAD_ROWCOL(val)	bfin_write16(KPAD_ROWCOL, val)
+#define bfin_read_KPAD_STAT()		bfin_read16(KPAD_STAT)
+#define bfin_write_KPAD_STAT(val)	bfin_write16(KPAD_STAT, val)
+#define bfin_read_KPAD_SOFTEVAL()	bfin_read16(KPAD_SOFTEVAL)
+#define bfin_write_KPAD_SOFTEVAL(val)	bfin_write16(KPAD_SOFTEVAL, val)
+
+/* Pixel Combfin_read_()ositor (PIXC) Registers */
+
+#define bfin_read_PIXC_CTL()		bfin_read16(PIXC_CTL)
+#define bfin_write_PIXC_CTL(val)	bfin_write16(PIXC_CTL, val)
+#define bfin_read_PIXC_PPL()		bfin_read16(PIXC_PPL)
+#define bfin_write_PIXC_PPL(val)	bfin_write16(PIXC_PPL, val)
+#define bfin_read_PIXC_LPF()		bfin_read16(PIXC_LPF)
+#define bfin_write_PIXC_LPF(val)	bfin_write16(PIXC_LPF, val)
+#define bfin_read_PIXC_AHSTART()	bfin_read16(PIXC_AHSTART)
+#define bfin_write_PIXC_AHSTART(val)	bfin_write16(PIXC_AHSTART, val)
+#define bfin_read_PIXC_AHEND()		bfin_read16(PIXC_AHEND)
+#define bfin_write_PIXC_AHEND(val)	bfin_write16(PIXC_AHEND, val)
+#define bfin_read_PIXC_AVSTART()	bfin_read16(PIXC_AVSTART)
+#define bfin_write_PIXC_AVSTART(val)	bfin_write16(PIXC_AVSTART, val)
+#define bfin_read_PIXC_AVEND()		bfin_read16(PIXC_AVEND)
+#define bfin_write_PIXC_AVEND(val)	bfin_write16(PIXC_AVEND, val)
+#define bfin_read_PIXC_ATRANSP()	bfin_read16(PIXC_ATRANSP)
+#define bfin_write_PIXC_ATRANSP(val)	bfin_write16(PIXC_ATRANSP, val)
+#define bfin_read_PIXC_BHSTART()	bfin_read16(PIXC_BHSTART)
+#define bfin_write_PIXC_BHSTART(val)	bfin_write16(PIXC_BHSTART, val)
+#define bfin_read_PIXC_BHEND()		bfin_read16(PIXC_BHEND)
+#define bfin_write_PIXC_BHEND(val)	bfin_write16(PIXC_BHEND, val)
+#define bfin_read_PIXC_BVSTART()	bfin_read16(PIXC_BVSTART)
+#define bfin_write_PIXC_BVSTART(val)	bfin_write16(PIXC_BVSTART, val)
+#define bfin_read_PIXC_BVEND()		bfin_read16(PIXC_BVEND)
+#define bfin_write_PIXC_BVEND(val)	bfin_write16(PIXC_BVEND, val)
+#define bfin_read_PIXC_BTRANSP()	bfin_read16(PIXC_BTRANSP)
+#define bfin_write_PIXC_BTRANSP(val)	bfin_write16(PIXC_BTRANSP, val)
+#define bfin_read_PIXC_INTRSTAT()	bfin_read16(PIXC_INTRSTAT)
+#define bfin_write_PIXC_INTRSTAT(val)	bfin_write16(PIXC_INTRSTAT, val)
+#define bfin_read_PIXC_RYCON()		bfin_read32(PIXC_RYCON)
+#define bfin_write_PIXC_RYCON(val)	bfin_write32(PIXC_RYCON, val)
+#define bfin_read_PIXC_GUCON()		bfin_read32(PIXC_GUCON)
+#define bfin_write_PIXC_GUCON(val)	bfin_write32(PIXC_GUCON, val)
+#define bfin_read_PIXC_BVCON()		bfin_read32(PIXC_BVCON)
+#define bfin_write_PIXC_BVCON(val)	bfin_write32(PIXC_BVCON, val)
+#define bfin_read_PIXC_CCBIAS()		bfin_read32(PIXC_CCBIAS)
+#define bfin_write_PIXC_CCBIAS(val)	bfin_write32(PIXC_CCBIAS, val)
+#define bfin_read_PIXC_TC()		bfin_read32(PIXC_TC)
+#define bfin_write_PIXC_TC(val)		bfin_write32(PIXC_TC, val)
+
+/* Handshake MDMA 0 Registers */
+
+#define bfin_read_HMDMA0_CONTROL()		bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val)		bfin_write16(HMDMA0_CONTROL, val)
+#define bfin_read_HMDMA0_ECINIT()		bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val)		bfin_write16(HMDMA0_ECINIT, val)
+#define bfin_read_HMDMA0_BCINIT()		bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val)		bfin_write16(HMDMA0_BCINIT, val)
+#define bfin_read_HMDMA0_ECURGENT()		bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val)		bfin_write16(HMDMA0_ECURGENT, val)
+#define bfin_read_HMDMA0_ECOVERFLOW()		bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val)	bfin_write16(HMDMA0_ECOVERFLOW, val)
+#define bfin_read_HMDMA0_ECOUNT()		bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val)		bfin_write16(HMDMA0_ECOUNT, val)
+#define bfin_read_HMDMA0_BCOUNT()		bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val)		bfin_write16(HMDMA0_BCOUNT, val)
+
+/* Handshake MDMA 1 Registers */
+
+#define bfin_read_HMDMA1_CONTROL()		bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val)		bfin_write16(HMDMA1_CONTROL, val)
+#define bfin_read_HMDMA1_ECINIT()		bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val)		bfin_write16(HMDMA1_ECINIT, val)
+#define bfin_read_HMDMA1_BCINIT()		bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val)		bfin_write16(HMDMA1_BCINIT, val)
+#define bfin_read_HMDMA1_ECURGENT()		bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val)		bfin_write16(HMDMA1_ECURGENT, val)
+#define bfin_read_HMDMA1_ECOVERFLOW()		bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val)	bfin_write16(HMDMA1_ECOVERFLOW, val)
+#define bfin_read_HMDMA1_ECOUNT()		bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val)		bfin_write16(HMDMA1_ECOUNT, val)
+#define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
+
+#endif /* _CDEF_BF548_H */
diff --git a/include/asm-blackfin/mach-bf548/defBF547.h b/include/asm-blackfin/mach-bf548/defBF547.h
new file mode 100644
index 0000000..3a3a18e
--- /dev/null
+++ b/include/asm-blackfin/mach-bf548/defBF547.h
@@ -0,0 +1,1244 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/defBF547.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF548_H
+#define _DEF_BF548_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/mach-common/def_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
+
+/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
+#include "defBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
+
+/* Timer Registers */
+
+#define                    TIMER8_CONFIG  0xffc00600   /* Timer 8 Configuration Register */
+#define                   TIMER8_COUNTER  0xffc00604   /* Timer 8 Counter Register */
+#define                    TIMER8_PERIOD  0xffc00608   /* Timer 8 Period Register */
+#define                     TIMER8_WIDTH  0xffc0060c   /* Timer 8 Width Register */
+#define                    TIMER9_CONFIG  0xffc00610   /* Timer 9 Configuration Register */
+#define                   TIMER9_COUNTER  0xffc00614   /* Timer 9 Counter Register */
+#define                    TIMER9_PERIOD  0xffc00618   /* Timer 9 Period Register */
+#define                     TIMER9_WIDTH  0xffc0061c   /* Timer 9 Width Register */
+#define                   TIMER10_CONFIG  0xffc00620   /* Timer 10 Configuration Register */
+#define                  TIMER10_COUNTER  0xffc00624   /* Timer 10 Counter Register */
+#define                   TIMER10_PERIOD  0xffc00628   /* Timer 10 Period Register */
+#define                    TIMER10_WIDTH  0xffc0062c   /* Timer 10 Width Register */
+
+/* Timer Group of 3 Registers */
+
+#define                    TIMER_ENABLE1  0xffc00640   /* Timer Group of 3 Enable Register */
+#define                   TIMER_DISABLE1  0xffc00644   /* Timer Group of 3 Disable Register */
+#define                    TIMER_STATUS1  0xffc00648   /* Timer Group of 3 Status Register */
+
+/* SPORT0 Registers */
+
+#define                      SPORT0_TCR1  0xffc00800   /* SPORT0 Transmit Configuration 1 Register */
+#define                      SPORT0_TCR2  0xffc00804   /* SPORT0 Transmit Configuration 2 Register */
+#define                   SPORT0_TCLKDIV  0xffc00808   /* SPORT0 Transmit Serial Clock Divider Register */
+#define                    SPORT0_TFSDIV  0xffc0080c   /* SPORT0 Transmit Frame Sync Divider Register */
+#define                        SPORT0_TX  0xffc00810   /* SPORT0 Transmit Data Register */
+#define                        SPORT0_RX  0xffc00818   /* SPORT0 Receive Data Register */
+#define                      SPORT0_RCR1  0xffc00820   /* SPORT0 Receive Configuration 1 Register */
+#define                      SPORT0_RCR2  0xffc00824   /* SPORT0 Receive Configuration 2 Register */
+#define                   SPORT0_RCLKDIV  0xffc00828   /* SPORT0 Receive Serial Clock Divider Register */
+#define                    SPORT0_RFSDIV  0xffc0082c   /* SPORT0 Receive Frame Sync Divider Register */
+#define                      SPORT0_STAT  0xffc00830   /* SPORT0 Status Register */
+#define                      SPORT0_CHNL  0xffc00834   /* SPORT0 Current Channel Register */
+#define                     SPORT0_MCMC1  0xffc00838   /* SPORT0 Multi channel Configuration Register 1 */
+#define                     SPORT0_MCMC2  0xffc0083c   /* SPORT0 Multi channel Configuration Register 2 */
+#define                     SPORT0_MTCS0  0xffc00840   /* SPORT0 Multi channel Transmit Select Register 0 */
+#define                     SPORT0_MTCS1  0xffc00844   /* SPORT0 Multi channel Transmit Select Register 1 */
+#define                     SPORT0_MTCS2  0xffc00848   /* SPORT0 Multi channel Transmit Select Register 2 */
+#define                     SPORT0_MTCS3  0xffc0084c   /* SPORT0 Multi channel Transmit Select Register 3 */
+#define                     SPORT0_MRCS0  0xffc00850   /* SPORT0 Multi channel Receive Select Register 0 */
+#define                     SPORT0_MRCS1  0xffc00854   /* SPORT0 Multi channel Receive Select Register 1 */
+#define                     SPORT0_MRCS2  0xffc00858   /* SPORT0 Multi channel Receive Select Register 2 */
+#define                     SPORT0_MRCS3  0xffc0085c   /* SPORT0 Multi channel Receive Select Register 3 */
+
+/* EPPI0 Registers */
+
+#define                     EPPI0_STATUS  0xffc01000   /* EPPI0 Status Register */
+#define                     EPPI0_HCOUNT  0xffc01004   /* EPPI0 Horizontal Transfer Count Register */
+#define                     EPPI0_HDELAY  0xffc01008   /* EPPI0 Horizontal Delay Count Register */
+#define                     EPPI0_VCOUNT  0xffc0100c   /* EPPI0 Vertical Transfer Count Register */
+#define                     EPPI0_VDELAY  0xffc01010   /* EPPI0 Vertical Delay Count Register */
+#define                      EPPI0_FRAME  0xffc01014   /* EPPI0 Lines per Frame Register */
+#define                       EPPI0_LINE  0xffc01018   /* EPPI0 Samples per Line Register */
+#define                     EPPI0_CLKDIV  0xffc0101c   /* EPPI0 Clock Divide Register */
+#define                    EPPI0_CONTROL  0xffc01020   /* EPPI0 Control Register */
+#define                   EPPI0_FS1W_HBL  0xffc01024   /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
+#define                  EPPI0_FS1P_AVPL  0xffc01028   /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
+#define                   EPPI0_FS2W_LVB  0xffc0102c   /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
+#define                  EPPI0_FS2P_LAVF  0xffc01030   /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
+#define                       EPPI0_CLIP  0xffc01034   /* EPPI0 Clipping Register */
+
+/* UART2 Registers */
+
+#define                        UART2_DLL  0xffc02100   /* Divisor Latch Low Byte */
+#define                        UART2_DLH  0xffc02104   /* Divisor Latch High Byte */
+#define                       UART2_GCTL  0xffc02108   /* Global Control Register */
+#define                        UART2_LCR  0xffc0210c   /* Line Control Register */
+#define                        UART2_MCR  0xffc02110   /* Modem Control Register */
+#define                        UART2_LSR  0xffc02114   /* Line Status Register */
+#define                        UART2_MSR  0xffc02118   /* Modem Status Register */
+#define                        UART2_SCR  0xffc0211c   /* Scratch Register */
+#define                    UART2_IER_SET  0xffc02120   /* Interrupt Enable Register Set */
+#define                  UART2_IER_CLEAR  0xffc02124   /* Interrupt Enable Register Clear */
+#define                        UART2_RBR  0xffc0212c   /* Receive Buffer Register */
+
+/* Two Wire Interface Registers (TWI1) */
+
+#define                     TWI1_REGBASE  0xffc02200
+#define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
+#define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
+#define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
+#define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
+#define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
+#define                 TWI1_MASTER_CTRL  0xffc02214   /* TWI Master Mode Control Register */
+#define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
+#define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
+#define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
+#define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
+#define                   TWI1_FIFO_CTRL  0xffc02228   /* TWI FIFO Control Register */
+#define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
+#define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
+#define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
+#define                   TWI1_RCV_DATA8  0xffc02288   /* TWI FIFO Receive Data Single Byte Register */
+#define                  TWI1_RCV_DATA16  0xffc0228c   /* TWI FIFO Receive Data Double Byte Register */
+
+/* SPI2  Registers */
+
+#define                     SPI2_REGBASE  0xffc02400
+#define                         SPI2_CTL  0xffc02400   /* SPI2 Control Register */
+#define                         SPI2_FLG  0xffc02404   /* SPI2 Flag Register */
+#define                        SPI2_STAT  0xffc02408   /* SPI2 Status Register */
+#define                        SPI2_TDBR  0xffc0240c   /* SPI2 Transmit Data Buffer Register */
+#define                        SPI2_RDBR  0xffc02410   /* SPI2 Receive Data Buffer Register */
+#define                        SPI2_BAUD  0xffc02414   /* SPI2 Baud Rate Register */
+#define                      SPI2_SHADOW  0xffc02418   /* SPI2 Receive Data Buffer Shadow Register */
+
+/* ATAPI Registers */
+
+#define                    ATAPI_CONTROL  0xffc03800   /* ATAPI Control Register */
+#define                     ATAPI_STATUS  0xffc03804   /* ATAPI Status Register */
+#define                   ATAPI_DEV_ADDR  0xffc03808   /* ATAPI Device Register Address */
+#define                  ATAPI_DEV_TXBUF  0xffc0380c   /* ATAPI Device Register Write Data */
+#define                  ATAPI_DEV_RXBUF  0xffc03810   /* ATAPI Device Register Read Data */
+#define                   ATAPI_INT_MASK  0xffc03814   /* ATAPI Interrupt Mask Register */
+#define                 ATAPI_INT_STATUS  0xffc03818   /* ATAPI Interrupt Status Register */
+#define                   ATAPI_XFER_LEN  0xffc0381c   /* ATAPI Length of Transfer */
+#define                ATAPI_LINE_STATUS  0xffc03820   /* ATAPI Line Status */
+#define                   ATAPI_SM_STATE  0xffc03824   /* ATAPI State Machine Status */
+#define                  ATAPI_TERMINATE  0xffc03828   /* ATAPI Host Terminate */
+#define                 ATAPI_PIO_TFRCNT  0xffc0382c   /* ATAPI PIO mode transfer count */
+#define                 ATAPI_DMA_TFRCNT  0xffc03830   /* ATAPI DMA mode transfer count */
+#define               ATAPI_UMAIN_TFRCNT  0xffc03834   /* ATAPI UDMAIN transfer count */
+#define             ATAPI_UDMAOUT_TFRCNT  0xffc03838   /* ATAPI UDMAOUT transfer count */
+#define                  ATAPI_REG_TIM_0  0xffc03840   /* ATAPI Register Transfer Timing 0 */
+#define                  ATAPI_PIO_TIM_0  0xffc03844   /* ATAPI PIO Timing 0 Register */
+#define                  ATAPI_PIO_TIM_1  0xffc03848   /* ATAPI PIO Timing 1 Register */
+#define                ATAPI_MULTI_TIM_0  0xffc03850   /* ATAPI Multi-DMA Timing 0 Register */
+#define                ATAPI_MULTI_TIM_1  0xffc03854   /* ATAPI Multi-DMA Timing 1 Register */
+#define                ATAPI_MULTI_TIM_2  0xffc03858   /* ATAPI Multi-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_0  0xffc03860   /* ATAPI Ultra-DMA Timing 0 Register */
+#define                ATAPI_ULTRA_TIM_1  0xffc03864   /* ATAPI Ultra-DMA Timing 1 Register */
+#define                ATAPI_ULTRA_TIM_2  0xffc03868   /* ATAPI Ultra-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_3  0xffc0386c   /* ATAPI Ultra-DMA Timing 3 Register */
+
+/* SDH Registers */
+
+#define                      SDH_PWR_CTL  0xffc03900   /* SDH Power Control */
+#define                      SDH_CLK_CTL  0xffc03904   /* SDH Clock Control */
+#define                     SDH_ARGUMENT  0xffc03908   /* SDH Argument */
+#define                      SDH_COMMAND  0xffc0390c   /* SDH Command */
+#define                     SDH_RESP_CMD  0xffc03910   /* SDH Response Command */
+#define                    SDH_RESPONSE0  0xffc03914   /* SDH Response0 */
+#define                    SDH_RESPONSE1  0xffc03918   /* SDH Response1 */
+#define                    SDH_RESPONSE2  0xffc0391c   /* SDH Response2 */
+#define                    SDH_RESPONSE3  0xffc03920   /* SDH Response3 */
+#define                   SDH_DATA_TIMER  0xffc03924   /* SDH Data Timer */
+#define                    SDH_DATA_LGTH  0xffc03928   /* SDH Data Length */
+#define                     SDH_DATA_CTL  0xffc0392c   /* SDH Data Control */
+#define                     SDH_DATA_CNT  0xffc03930   /* SDH Data Counter */
+#define                       SDH_STATUS  0xffc03934   /* SDH Status */
+#define                   SDH_STATUS_CLR  0xffc03938   /* SDH Status Clear */
+#define                        SDH_MASK0  0xffc0393c   /* SDH Interrupt0 Mask */
+#define                        SDH_MASK1  0xffc03940   /* SDH Interrupt1 Mask */
+#define                     SDH_FIFO_CNT  0xffc03948   /* SDH FIFO Counter */
+#define                         SDH_FIFO  0xffc03980   /* SDH Data FIFO */
+#define                     SDH_E_STATUS  0xffc039c0   /* SDH Exception Status */
+#define                       SDH_E_MASK  0xffc039c4   /* SDH Exception Mask */
+#define                          SDH_CFG  0xffc039c8   /* SDH Configuration */
+#define                   SDH_RD_WAIT_EN  0xffc039cc   /* SDH Read Wait Enable */
+#define                         SDH_PID0  0xffc039d0   /* SDH Peripheral Identification0 */
+#define                         SDH_PID1  0xffc039d4   /* SDH Peripheral Identification1 */
+#define                         SDH_PID2  0xffc039d8   /* SDH Peripheral Identification2 */
+#define                         SDH_PID3  0xffc039dc   /* SDH Peripheral Identification3 */
+#define                         SDH_PID4  0xffc039e0   /* SDH Peripheral Identification4 */
+#define                         SDH_PID5  0xffc039e4   /* SDH Peripheral Identification5 */
+#define                         SDH_PID6  0xffc039e8   /* SDH Peripheral Identification6 */
+#define                         SDH_PID7  0xffc039ec   /* SDH Peripheral Identification7 */
+
+/* HOST Port Registers */
+
+#define                     HOST_CONTROL  0xffc03a00   /* HOST Control Register */
+#define                      HOST_STATUS  0xffc03a04   /* HOST Status Register */
+#define                     HOST_TIMEOUT  0xffc03a08   /* HOST Acknowledge Mode Timeout Register */
+
+/* USB Control Registers */
+
+#define                        USB_FADDR  0xffc03c00   /* Function address register */
+#define                        USB_POWER  0xffc03c04   /* Power management register */
+#define                       USB_INTRTX  0xffc03c08   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
+#define                       USB_INTRRX  0xffc03c0c   /* Interrupt register for Rx endpoints 1 to 7 */
+#define                      USB_INTRTXE  0xffc03c10   /* Interrupt enable register for IntrTx */
+#define                      USB_INTRRXE  0xffc03c14   /* Interrupt enable register for IntrRx */
+#define                      USB_INTRUSB  0xffc03c18   /* Interrupt register for common USB interrupts */
+#define                     USB_INTRUSBE  0xffc03c1c   /* Interrupt enable register for IntrUSB */
+#define                        USB_FRAME  0xffc03c20   /* USB frame number */
+#define                        USB_INDEX  0xffc03c24   /* Index register for selecting the indexed endpoint registers */
+#define                     USB_TESTMODE  0xffc03c28   /* Enabled USB 20 test modes */
+#define                     USB_GLOBINTR  0xffc03c2c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
+#define                   USB_GLOBAL_CTL  0xffc03c30   /* Global Clock Control for the core */
+
+/* USB Packet Control Registers */
+
+#define                USB_TX_MAX_PACKET  0xffc03c40   /* Maximum packet size for Host Tx endpoint */
+#define                         USB_CSR0  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                        USB_TXCSR  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                USB_RX_MAX_PACKET  0xffc03c48   /* Maximum packet size for Host Rx endpoint */
+#define                        USB_RXCSR  0xffc03c4c   /* Control Status register for Host Rx endpoint */
+#define                       USB_COUNT0  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                      USB_RXCOUNT  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                       USB_TXTYPE  0xffc03c54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
+#define                    USB_NAKLIMIT0  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                   USB_TXINTERVAL  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                       USB_RXTYPE  0xffc03c5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
+#define                   USB_RXINTERVAL  0xffc03c60   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
+#define                      USB_TXCOUNT  0xffc03c68   /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* USB Endpoint FIFO Registers */
+
+#define                     USB_EP0_FIFO  0xffc03c80   /* Endpoint 0 FIFO */
+#define                     USB_EP1_FIFO  0xffc03c88   /* Endpoint 1 FIFO */
+#define                     USB_EP2_FIFO  0xffc03c90   /* Endpoint 2 FIFO */
+#define                     USB_EP3_FIFO  0xffc03c98   /* Endpoint 3 FIFO */
+#define                     USB_EP4_FIFO  0xffc03ca0   /* Endpoint 4 FIFO */
+#define                     USB_EP5_FIFO  0xffc03ca8   /* Endpoint 5 FIFO */
+#define                     USB_EP6_FIFO  0xffc03cb0   /* Endpoint 6 FIFO */
+#define                     USB_EP7_FIFO  0xffc03cb8   /* Endpoint 7 FIFO */
+
+/* USB OTG Control Registers */
+
+#define                  USB_OTG_DEV_CTL  0xffc03d00   /* OTG Device Control Register */
+#define                 USB_OTG_VBUS_IRQ  0xffc03d04   /* OTG VBUS Control Interrupts */
+#define                USB_OTG_VBUS_MASK  0xffc03d08   /* VBUS Control Interrupt Enable */
+
+/* USB Phy Control Registers */
+
+#define                     USB_LINKINFO  0xffc03d48   /* Enables programming of some PHY-side delays */
+#define                        USB_VPLEN  0xffc03d4c   /* Determines duration of VBUS pulse for VBUS charging */
+#define                      USB_HS_EOF1  0xffc03d50   /* Time buffer for High-Speed transactions */
+#define                      USB_FS_EOF1  0xffc03d54   /* Time buffer for Full-Speed transactions */
+#define                      USB_LS_EOF1  0xffc03d58   /* Time buffer for Low-Speed transactions */
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define                   USB_APHY_CNTRL  0xffc03de0   /* Register that increases visibility of Analog PHY */
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define                   USB_APHY_CALIB  0xffc03de4   /* Register used to set some calibration values */
+#define                  USB_APHY_CNTRL2  0xffc03de8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define                     USB_PHY_TEST  0xffc03dec   /* Used for reducing simulation time and simplifies FIFO testability */
+#define                  USB_PLLOSC_CTRL  0xffc03df0   /* Used to program different parameters for USB PLL and Oscillator */
+#define                   USB_SRP_CLKDIV  0xffc03df4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
+
+/* USB Endpoint 0 Control Registers */
+
+#define                USB_EP_NI0_TXMAXP  0xffc03e00   /* Maximum packet size for Host Tx endpoint0 */
+#define                 USB_EP_NI0_TXCSR  0xffc03e04   /* Control Status register for endpoint 0 */
+#define                USB_EP_NI0_RXMAXP  0xffc03e08   /* Maximum packet size for Host Rx endpoint0 */
+#define                 USB_EP_NI0_RXCSR  0xffc03e0c   /* Control Status register for Host Rx endpoint0 */
+#define               USB_EP_NI0_RXCOUNT  0xffc03e10   /* Number of bytes received in endpoint 0 FIFO */
+#define                USB_EP_NI0_TXTYPE  0xffc03e14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
+#define            USB_EP_NI0_TXINTERVAL  0xffc03e18   /* Sets the NAK response timeout on Endpoint 0 */
+#define                USB_EP_NI0_RXTYPE  0xffc03e1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
+#define            USB_EP_NI0_RXINTERVAL  0xffc03e20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
+
+/* USB Endpoint 1 Control Registers */
+
+#define               USB_EP_NI0_TXCOUNT  0xffc03e28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
+#define                USB_EP_NI1_TXMAXP  0xffc03e40   /* Maximum packet size for Host Tx endpoint1 */
+#define                 USB_EP_NI1_TXCSR  0xffc03e44   /* Control Status register for endpoint1 */
+#define                USB_EP_NI1_RXMAXP  0xffc03e48   /* Maximum packet size for Host Rx endpoint1 */
+#define                 USB_EP_NI1_RXCSR  0xffc03e4c   /* Control Status register for Host Rx endpoint1 */
+#define               USB_EP_NI1_RXCOUNT  0xffc03e50   /* Number of bytes received in endpoint1 FIFO */
+#define                USB_EP_NI1_TXTYPE  0xffc03e54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
+#define            USB_EP_NI1_TXINTERVAL  0xffc03e58   /* Sets the NAK response timeout on Endpoint1 */
+#define                USB_EP_NI1_RXTYPE  0xffc03e5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
+#define            USB_EP_NI1_RXINTERVAL  0xffc03e60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
+
+/* USB Endpoint 2 Control Registers */
+
+#define               USB_EP_NI1_TXCOUNT  0xffc03e68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
+#define                USB_EP_NI2_TXMAXP  0xffc03e80   /* Maximum packet size for Host Tx endpoint2 */
+#define                 USB_EP_NI2_TXCSR  0xffc03e84   /* Control Status register for endpoint2 */
+#define                USB_EP_NI2_RXMAXP  0xffc03e88   /* Maximum packet size for Host Rx endpoint2 */
+#define                 USB_EP_NI2_RXCSR  0xffc03e8c   /* Control Status register for Host Rx endpoint2 */
+#define               USB_EP_NI2_RXCOUNT  0xffc03e90   /* Number of bytes received in endpoint2 FIFO */
+#define                USB_EP_NI2_TXTYPE  0xffc03e94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
+#define            USB_EP_NI2_TXINTERVAL  0xffc03e98   /* Sets the NAK response timeout on Endpoint2 */
+#define                USB_EP_NI2_RXTYPE  0xffc03e9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
+#define            USB_EP_NI2_RXINTERVAL  0xffc03ea0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
+
+/* USB Endpoint 3 Control Registers */
+
+#define               USB_EP_NI2_TXCOUNT  0xffc03ea8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
+#define                USB_EP_NI3_TXMAXP  0xffc03ec0   /* Maximum packet size for Host Tx endpoint3 */
+#define                 USB_EP_NI3_TXCSR  0xffc03ec4   /* Control Status register for endpoint3 */
+#define                USB_EP_NI3_RXMAXP  0xffc03ec8   /* Maximum packet size for Host Rx endpoint3 */
+#define                 USB_EP_NI3_RXCSR  0xffc03ecc   /* Control Status register for Host Rx endpoint3 */
+#define               USB_EP_NI3_RXCOUNT  0xffc03ed0   /* Number of bytes received in endpoint3 FIFO */
+#define                USB_EP_NI3_TXTYPE  0xffc03ed4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
+#define            USB_EP_NI3_TXINTERVAL  0xffc03ed8   /* Sets the NAK response timeout on Endpoint3 */
+#define                USB_EP_NI3_RXTYPE  0xffc03edc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
+#define            USB_EP_NI3_RXINTERVAL  0xffc03ee0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
+
+/* USB Endpoint 4 Control Registers */
+
+#define               USB_EP_NI3_TXCOUNT  0xffc03ee8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
+#define                USB_EP_NI4_TXMAXP  0xffc03f00   /* Maximum packet size for Host Tx endpoint4 */
+#define                 USB_EP_NI4_TXCSR  0xffc03f04   /* Control Status register for endpoint4 */
+#define                USB_EP_NI4_RXMAXP  0xffc03f08   /* Maximum packet size for Host Rx endpoint4 */
+#define                 USB_EP_NI4_RXCSR  0xffc03f0c   /* Control Status register for Host Rx endpoint4 */
+#define               USB_EP_NI4_RXCOUNT  0xffc03f10   /* Number of bytes received in endpoint4 FIFO */
+#define                USB_EP_NI4_TXTYPE  0xffc03f14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
+#define            USB_EP_NI4_TXINTERVAL  0xffc03f18   /* Sets the NAK response timeout on Endpoint4 */
+#define                USB_EP_NI4_RXTYPE  0xffc03f1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
+#define            USB_EP_NI4_RXINTERVAL  0xffc03f20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
+
+/* USB Endpoint 5 Control Registers */
+
+#define               USB_EP_NI4_TXCOUNT  0xffc03f28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
+#define                USB_EP_NI5_TXMAXP  0xffc03f40   /* Maximum packet size for Host Tx endpoint5 */
+#define                 USB_EP_NI5_TXCSR  0xffc03f44   /* Control Status register for endpoint5 */
+#define                USB_EP_NI5_RXMAXP  0xffc03f48   /* Maximum packet size for Host Rx endpoint5 */
+#define                 USB_EP_NI5_RXCSR  0xffc03f4c   /* Control Status register for Host Rx endpoint5 */
+#define               USB_EP_NI5_RXCOUNT  0xffc03f50   /* Number of bytes received in endpoint5 FIFO */
+#define                USB_EP_NI5_TXTYPE  0xffc03f54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
+#define            USB_EP_NI5_TXINTERVAL  0xffc03f58   /* Sets the NAK response timeout on Endpoint5 */
+#define                USB_EP_NI5_RXTYPE  0xffc03f5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
+#define            USB_EP_NI5_RXINTERVAL  0xffc03f60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
+
+/* USB Endpoint 6 Control Registers */
+
+#define               USB_EP_NI5_TXCOUNT  0xffc03f68   /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
+#define                USB_EP_NI6_TXMAXP  0xffc03f80   /* Maximum packet size for Host Tx endpoint6 */
+#define                 USB_EP_NI6_TXCSR  0xffc03f84   /* Control Status register for endpoint6 */
+#define                USB_EP_NI6_RXMAXP  0xffc03f88   /* Maximum packet size for Host Rx endpoint6 */
+#define                 USB_EP_NI6_RXCSR  0xffc03f8c   /* Control Status register for Host Rx endpoint6 */
+#define               USB_EP_NI6_RXCOUNT  0xffc03f90   /* Number of bytes received in endpoint6 FIFO */
+#define                USB_EP_NI6_TXTYPE  0xffc03f94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
+#define            USB_EP_NI6_TXINTERVAL  0xffc03f98   /* Sets the NAK response timeout on Endpoint6 */
+#define                USB_EP_NI6_RXTYPE  0xffc03f9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
+#define            USB_EP_NI6_RXINTERVAL  0xffc03fa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
+
+/* USB Endpoint 7 Control Registers */
+
+#define               USB_EP_NI6_TXCOUNT  0xffc03fa8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
+#define                USB_EP_NI7_TXMAXP  0xffc03fc0   /* Maximum packet size for Host Tx endpoint7 */
+#define                 USB_EP_NI7_TXCSR  0xffc03fc4   /* Control Status register for endpoint7 */
+#define                USB_EP_NI7_RXMAXP  0xffc03fc8   /* Maximum packet size for Host Rx endpoint7 */
+#define                 USB_EP_NI7_RXCSR  0xffc03fcc   /* Control Status register for Host Rx endpoint7 */
+#define               USB_EP_NI7_RXCOUNT  0xffc03fd0   /* Number of bytes received in endpoint7 FIFO */
+#define                USB_EP_NI7_TXTYPE  0xffc03fd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
+#define            USB_EP_NI7_TXINTERVAL  0xffc03fd8   /* Sets the NAK response timeout on Endpoint7 */
+#define                USB_EP_NI7_RXTYPE  0xffc03fdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
+#define            USB_EP_NI7_RXINTERVAL  0xffc03ff0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define               USB_EP_NI7_TXCOUNT  0xffc03ff8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
+#define                USB_DMA_INTERRUPT  0xffc04000   /* Indicates pending interrupts for the DMA channels */
+
+/* USB Channel 0 Config Registers */
+
+#define                  USB_DMA0CONTROL  0xffc04004   /* DMA master channel 0 configuration */
+#define                  USB_DMA0ADDRLOW  0xffc04008   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0ADDRHIGH  0xffc0400c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0COUNTLOW  0xffc04010   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
+#define                USB_DMA0COUNTHIGH  0xffc04014   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
+
+/* USB Channel 1 Config Registers */
+
+#define                  USB_DMA1CONTROL  0xffc04024   /* DMA master channel 1 configuration */
+#define                  USB_DMA1ADDRLOW  0xffc04028   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1ADDRHIGH  0xffc0402c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1COUNTLOW  0xffc04030   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
+#define                USB_DMA1COUNTHIGH  0xffc04034   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
+
+/* USB Channel 2 Config Registers */
+
+#define                  USB_DMA2CONTROL  0xffc04044   /* DMA master channel 2 configuration */
+#define                  USB_DMA2ADDRLOW  0xffc04048   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2ADDRHIGH  0xffc0404c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2COUNTLOW  0xffc04050   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
+#define                USB_DMA2COUNTHIGH  0xffc04054   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
+
+/* USB Channel 3 Config Registers */
+
+#define                  USB_DMA3CONTROL  0xffc04064   /* DMA master channel 3 configuration */
+#define                  USB_DMA3ADDRLOW  0xffc04068   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3ADDRHIGH  0xffc0406c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3COUNTLOW  0xffc04070   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
+#define                USB_DMA3COUNTHIGH  0xffc04074   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
+
+/* USB Channel 4 Config Registers */
+
+#define                  USB_DMA4CONTROL  0xffc04084   /* DMA master channel 4 configuration */
+#define                  USB_DMA4ADDRLOW  0xffc04088   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4ADDRHIGH  0xffc0408c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4COUNTLOW  0xffc04090   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
+#define                USB_DMA4COUNTHIGH  0xffc04094   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
+
+/* USB Channel 5 Config Registers */
+
+#define                  USB_DMA5CONTROL  0xffc040a4   /* DMA master channel 5 configuration */
+#define                  USB_DMA5ADDRLOW  0xffc040a8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5ADDRHIGH  0xffc040ac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5COUNTLOW  0xffc040b0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
+#define                USB_DMA5COUNTHIGH  0xffc040b4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
+
+/* USB Channel 6 Config Registers */
+
+#define                  USB_DMA6CONTROL  0xffc040c4   /* DMA master channel 6 configuration */
+#define                  USB_DMA6ADDRLOW  0xffc040c8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6ADDRHIGH  0xffc040cc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6COUNTLOW  0xffc040d0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
+#define                USB_DMA6COUNTHIGH  0xffc040d4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
+
+/* USB Channel 7 Config Registers */
+
+#define                  USB_DMA7CONTROL  0xffc040e4   /* DMA master channel 7 configuration */
+#define                  USB_DMA7ADDRLOW  0xffc040e8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7ADDRHIGH  0xffc040ec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7COUNTLOW  0xffc040f0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
+#define                USB_DMA7COUNTHIGH  0xffc040f4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
+
+/* Keypad Registers */
+
+#define                         KPAD_CTL  0xffc04100   /* Controls keypad module enable and disable */
+#define                    KPAD_PRESCALE  0xffc04104   /* Establish a time base for programing the KPAD_MSEL register */
+#define                        KPAD_MSEL  0xffc04108   /* Selects delay parameters for keypad interface sensitivity */
+#define                      KPAD_ROWCOL  0xffc0410c   /* Captures the row and column output values of the keys pressed */
+#define                        KPAD_STAT  0xffc04110   /* Holds and clears the status of the keypad interface interrupt */
+#define                    KPAD_SOFTEVAL  0xffc04114   /* Lets software force keypad interface to check for keys being pressed */
+
+/* Pixel Compositor (PIXC) Registers */
+
+#define                         PIXC_CTL  0xffc04400   /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
+#define                         PIXC_PPL  0xffc04404   /* Holds the number of pixels per line of the display */
+#define                         PIXC_LPF  0xffc04408   /* Holds the number of lines per frame of the display */
+#define                     PIXC_AHSTART  0xffc0440c   /* Contains horizontal start pixel information of the overlay data (set A) */
+#define                       PIXC_AHEND  0xffc04410   /* Contains horizontal end pixel information of the overlay data (set A) */
+#define                     PIXC_AVSTART  0xffc04414   /* Contains vertical start pixel information of the overlay data (set A) */
+#define                       PIXC_AVEND  0xffc04418   /* Contains vertical end pixel information of the overlay data (set A) */
+#define                     PIXC_ATRANSP  0xffc0441c   /* Contains the transparency ratio (set A) */
+#define                     PIXC_BHSTART  0xffc04420   /* Contains horizontal start pixel information of the overlay data (set B) */
+#define                       PIXC_BHEND  0xffc04424   /* Contains horizontal end pixel information of the overlay data (set B) */
+#define                     PIXC_BVSTART  0xffc04428   /* Contains vertical start pixel information of the overlay data (set B) */
+#define                       PIXC_BVEND  0xffc0442c   /* Contains vertical end pixel information of the overlay data (set B) */
+#define                     PIXC_BTRANSP  0xffc04430   /* Contains the transparency ratio (set B) */
+#define                    PIXC_INTRSTAT  0xffc0443c   /* Overlay interrupt configuration/status */
+#define                       PIXC_RYCON  0xffc04440   /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
+#define                       PIXC_GUCON  0xffc04444   /* Color space conversion matrix register. Contains the G/U conversion coefficients */
+#define                       PIXC_BVCON  0xffc04448   /* Color space conversion matrix register. Contains the B/V conversion coefficients */
+#define                      PIXC_CCBIAS  0xffc0444c   /* Bias values for the color space conversion matrix */
+#define                          PIXC_TC  0xffc04450   /* Holds the transparent color value */
+
+/* Handshake MDMA 0 Registers */
+
+#define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
+#define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
+#define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
+#define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
+#define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
+
+/* Handshake MDMA 1 Registers */
+
+#define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
+#define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
+#define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
+#define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
+#define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
+
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for PIXC_CTL */
+
+#define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
+#define                  OVR_A_EN  0x2        /* Overlay A Enable */
+#define                  OVR_B_EN  0x4        /* Overlay B Enable */
+#define                  IMG_FORM  0x8        /* Image Data Format */
+#define                  OVR_FORM  0x10       /* Overlay Data Format */
+#define                  OUT_FORM  0x20       /* Output Data Format */
+#define                   UDS_MOD  0x40       /* Resampling Mode */
+#define                     TC_EN  0x80       /* Transparent Color Enable */
+#define                  IMG_STAT  0x300      /* Image FIFO Status */
+#define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
+#define                    WM_LVL  0x3000     /* FIFO Watermark Level */
+
+/* Bit masks for PIXC_AHSTART */
+
+#define                  A_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_AHEND */
+
+#define                    A_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_AVSTART */
+
+#define                  A_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_AVEND */
+
+#define                    A_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_ATRANSP */
+
+#define                  A_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_BHSTART */
+
+#define                  B_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_BHEND */
+
+#define                    B_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_BVSTART */
+
+#define                  B_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_BVEND */
+
+#define                    B_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_BTRANSP */
+
+#define                  B_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_INTRSTAT */
+
+#define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
+#define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
+#define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
+#define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
+
+/* Bit masks for PIXC_RYCON */
+
+#define                       A11  0x3ff      /* A11 in the Coefficient Matrix */
+#define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
+#define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
+#define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_GUCON */
+
+#define                       A21  0x3ff      /* A21 in the Coefficient Matrix */
+#define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
+#define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
+#define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_BVCON */
+
+#define                       A31  0x3ff      /* A31 in the Coefficient Matrix */
+#define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
+#define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
+#define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_CCBIAS */
+
+#define                       A14  0x3ff      /* A14 in the Bias Vector */
+#define                       A24  0xffc00    /* A24 in the Bias Vector */
+#define                       A34  0x3ff00000 /* A34 in the Bias Vector */
+
+/* Bit masks for PIXC_TC */
+
+#define                  RY_TRANS  0xff       /* Transparent Color - R/Y Component */
+#define                  GU_TRANS  0xff00     /* Transparent Color - G/U Component */
+#define                  BV_TRANS  0xff0000   /* Transparent Color - B/V Component */
+
+/* Bit masks for HOST_CONTROL */
+
+#define                   HOST_EN  0x1        /* Host Enable */
+#define                  HOST_END  0x2        /* Host Endianess */
+#define                 DATA_SIZE  0x4        /* Data Size */
+#define                  HOST_RST  0x8        /* Host Reset */
+#define                  HRDY_OVR  0x20       /* Host Ready Override */
+#define                  INT_MODE  0x40       /* Interrupt Mode */
+#define                     BT_EN  0x80       /* Bus Timeout Enable */
+#define                       EHW  0x100      /* Enable Host Write */
+#define                       EHR  0x200      /* Enable Host Read */
+#define                       BDR  0x400      /* Burst DMA Requests */
+
+/* Bit masks for HOST_STATUS */
+
+#define                 DMA_READY  0x1        /* DMA Ready */
+#define                  FIFOFULL  0x2        /* FIFO Full */
+#define                 FIFOEMPTY  0x4        /* FIFO Empty */
+#define              DMA_COMPLETE  0x8        /* DMA Complete */
+#define                      HSHK  0x10       /* Host Handshake */
+#define                 HSTIMEOUT  0x20       /* Host Timeout */
+#define                      HIRQ  0x40       /* Host Interrupt Request */
+#define                ALLOW_CNFG  0x80       /* Allow New Configuration */
+#define                   DMA_DIR  0x100      /* DMA Direction */
+#define                       BTE  0x200      /* Bus Timeout Enabled */
+
+/* Bit masks for HOST_TIMEOUT */
+
+#define             COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
+
+/* Bit masks for KPAD_CTL */
+
+#define                   KPAD_EN  0x1        /* Keypad Enable */
+#define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
+#define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
+#define                KPAD_COLEN  0xe000     /* Column Enable Width */
+
+/* Bit masks for KPAD_PRESCALE */
+
+#define         KPAD_PRESCALE_VAL  0x3f       /* Key Prescale Value */
+
+/* Bit masks for KPAD_MSEL */
+
+#define                DBON_SCALE  0xff       /* Debounce Scale Value */
+#define              COLDRV_SCALE  0xff00     /* Column Driver Scale Value */
+
+/* Bit masks for KPAD_ROWCOL */
+
+#define                  KPAD_ROW  0xff       /* Rows Pressed */
+#define                  KPAD_COL  0xff00     /* Columns Pressed */
+
+/* Bit masks for KPAD_STAT */
+
+#define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
+#define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
+#define              KPAD_PRESSED  0x8        /* Key press current status */
+
+/* Bit masks for KPAD_SOFTEVAL */
+
+#define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
+
+/* Bit masks for SDH_COMMAND */
+
+#define                   CMD_IDX  0x3f       /* Command Index */
+#define                   CMD_RSP  0x40       /* Response */
+#define                 CMD_L_RSP  0x80       /* Long Response */
+#define                 CMD_INT_E  0x100      /* Command Interrupt */
+#define                CMD_PEND_E  0x200      /* Command Pending */
+#define                     CMD_E  0x400      /* Command Enable */
+
+/* Bit masks for SDH_PWR_CTL */
+
+#define                    PWR_ON  0x3        /* Power On */
+#if 0
+#define                       TBD  0x3c       /* TBD */
+#endif
+#define                 SD_CMD_OD  0x40       /* Open Drain Output */
+#define                   ROD_CTL  0x80       /* Rod Control */
+
+/* Bit masks for SDH_CLK_CTL */
+
+#define                    CLKDIV  0xff       /* MC_CLK Divisor */
+#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
+#define                  PWR_SV_E  0x200      /* Power Save Enable */
+#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
+#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
+
+/* Bit masks for SDH_RESP_CMD */
+
+#define                  RESP_CMD  0x3f       /* Response Command */
+
+/* Bit masks for SDH_DATA_CTL */
+
+#define                     DTX_E  0x1        /* Data Transfer Enable */
+#define                   DTX_DIR  0x2        /* Data Transfer Direction */
+#define                  DTX_MODE  0x4        /* Data Transfer Mode */
+#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
+#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
+
+/* Bit masks for SDH_STATUS */
+
+#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
+#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
+#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
+#define               DAT_TIME_OUT  0x8        /* Data Time Out */
+#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
+#define                RX_OVERRUN  0x20       /* Receive Overrun */
+#define              CMD_RESP_END  0x40       /* CMD Response End */
+#define                  CMD_SENT  0x80       /* CMD Sent */
+#define                   DAT_END  0x100      /* Data End */
+#define             START_BIT_ERR  0x200      /* Start Bit Error */
+#define               DAT_BLK_END  0x400      /* Data Block End */
+#define                   CMD_ACT  0x800      /* CMD Active */
+#define                    TX_ACT  0x1000     /* Transmit Active */
+#define                    RX_ACT  0x2000     /* Receive Active */
+#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
+#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
+#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
+#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
+#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
+#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
+#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
+#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
+
+/* Bit masks for SDH_STATUS_CLR */
+
+#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
+#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
+#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
+#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
+#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
+#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
+#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
+#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
+#define              DAT_END_STAT  0x100      /* Data End Status */
+#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
+#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
+
+/* Bit masks for SDH_MASK0 */
+
+#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
+#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
+#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
+#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
+#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
+#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
+#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
+#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
+#define              DAT_END_MASK  0x100      /* Data End Mask */
+#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
+#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
+#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
+#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
+#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
+#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
+#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
+#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
+#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
+#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
+#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
+#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
+#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
+
+/* Bit masks for SDH_FIFO_CNT */
+
+#define                FIFO_COUNT  0x7fff     /* FIFO Count */
+
+/* Bit masks for SDH_E_STATUS */
+
+#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
+#define               SD_CARD_DET  0x10       /* SD Card Detect */
+
+/* Bit masks for SDH_E_MASK */
+
+#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
+#define                   SCD_MSK  0x40       /* Mask Card Detect */
+
+/* Bit masks for SDH_CFG */
+
+#define                   CLKS_EN  0x1        /* Clocks Enable */
+#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
+#define                       MWE  0x8        /* Moving Window Enable */
+#define                    SD_RST  0x10       /* SDMMC Reset */
+#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
+#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
+#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
+
+/* Bit masks for SDH_RD_WAIT_EN */
+
+#define                       RWR  0x1        /* Read Wait Request */
+
+/* Bit masks for ATAPI_CONTROL */
+
+#define                 PIO_START  0x1        /* Start PIO/Reg Op */
+#define               MULTI_START  0x2        /* Start Multi-DMA Op */
+#define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
+#define                  XFER_DIR  0x8        /* Transfer Direction */
+#define                  IORDY_EN  0x10       /* IORDY Enable */
+#define                FIFO_FLUSH  0x20       /* Flush FIFOs */
+#define                  SOFT_RST  0x40       /* Soft Reset */
+#define                   DEV_RST  0x80       /* Device Reset */
+#define                TFRCNT_RST  0x100      /* Trans Count Reset */
+#define               END_ON_TERM  0x200      /* End/Terminate Select */
+#define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
+#define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
+
+/* Bit masks for ATAPI_STATUS */
+
+#define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
+#define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
+#define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
+#define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
+
+/* Bit masks for ATAPI_DEV_ADDR */
+
+#define                  DEV_ADDR  0x1f       /* Device Address */
+
+/* Bit masks for ATAPI_INT_MASK */
+
+#define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
+#define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
+#define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
+#define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
+#define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
+#define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
+#define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
+#define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
+#define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
+
+/* Bit masks for ATAPI_INT_STATUS */
+
+#define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
+#define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
+#define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
+#define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
+#define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
+#define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
+#define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
+#define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
+#define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
+
+/* Bit masks for ATAPI_LINE_STATUS */
+
+#define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
+#define                ATAPI_DASP  0x2        /* Device dasp to host line status */
+#define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
+#define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
+#define                ATAPI_ADDR  0x70       /* ATAPI address line status */
+#define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
+#define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
+#define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
+#define               ATAPI_DIORN  0x400      /* ATAPI read line status */
+#define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_SM_STATE */
+
+#define                PIO_CSTATE  0xf        /* PIO mode state machine current state */
+#define                DMA_CSTATE  0xf0       /* DMA mode state machine current state */
+#define             UDMAIN_CSTATE  0xf00      /* Ultra DMA-In mode state machine current state */
+#define            UDMAOUT_CSTATE  0xf000     /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_TERMINATE */
+
+#define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
+
+/* Bit masks for ATAPI_REG_TIM_0 */
+
+#define                    T2_REG  0xff       /* End of cycle time for register access transfers */
+#define                  TEOC_REG  0xff00     /* Selects DIOR/DIOW pulsewidth */
+
+/* Bit masks for ATAPI_PIO_TIM_0 */
+
+#define                    T1_REG  0xf        /* Time from address valid to DIOR/DIOW */
+#define                T2_REG_PIO  0xff0      /* DIOR/DIOW pulsewidth */
+#define                    T4_REG  0xf000     /* DIOW data hold */
+
+/* Bit masks for ATAPI_PIO_TIM_1 */
+
+#define              TEOC_REG_PIO  0xff       /* End of cycle time for PIO access transfers. */
+
+/* Bit masks for ATAPI_MULTI_TIM_0 */
+
+#define                        TD  0xff       /* DIOR/DIOW asserted pulsewidth */
+#define                        TM  0xff00     /* Time from address valid to DIOR/DIOW */
+
+/* Bit masks for ATAPI_MULTI_TIM_1 */
+
+#define                       TKW  0xff       /* Selects DIOW negated pulsewidth */
+#define                       TKR  0xff00     /* Selects DIOR negated pulsewidth */
+
+/* Bit masks for ATAPI_MULTI_TIM_2 */
+
+#define                        TH  0xff       /* Selects DIOW data hold */
+#define                      TEOC  0xff00     /* Selects end of cycle for DMA */
+
+/* Bit masks for ATAPI_ULTRA_TIM_0 */
+
+#define                      TACK  0xff       /* Selects setup and hold times for TACK */
+#define                      TENV  0xff00     /* Selects envelope time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_1 */
+
+#define                      TDVS  0xff       /* Selects data valid setup time */
+#define                 TCYC_TDVS  0xff00     /* Selects cycle time - TDVS time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_2 */
+
+#define                       TSS  0xff       /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
+#define                      TMLI  0xff00     /* Selects interlock time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_3 */
+
+#define                      TZAH  0xff       /* Selects minimum delay required for output */
+#define               READY_PAUSE  0xff00     /* Selects ready to pause */
+
+/* Bit masks for TIMER_ENABLE1 */
+
+#define                    TIMEN8  0x1        /* Timer 8 Enable */
+#define                    TIMEN9  0x2        /* Timer 9 Enable */
+#define                   TIMEN10  0x4        /* Timer 10 Enable */
+
+/* Bit masks for TIMER_DISABLE1 */
+
+#define                   TIMDIS8  0x1        /* Timer 8 Disable */
+#define                   TIMDIS9  0x2        /* Timer 9 Disable */
+#define                  TIMDIS10  0x4        /* Timer 10 Disable */
+
+/* Bit masks for TIMER_STATUS1 */
+
+#define                    TIMIL8  0x1        /* Timer 8 Interrupt */
+#define                    TIMIL9  0x2        /* Timer 9 Interrupt */
+#define                   TIMIL10  0x4        /* Timer 10 Interrupt */
+#define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
+#define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
+#define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
+#define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
+#define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
+#define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
+
+/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
+
+/* Bit masks for USB_FADDR */
+
+#define          FUNCTION_ADDRESS  0x7f       /* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
+#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
+#define               RESUME_MODE  0x4        /* DMA Mode */
+#define                     RESET  0x8        /* Reset indicator */
+#define                   HS_MODE  0x10       /* High Speed mode indicator */
+#define                 HS_ENABLE  0x20       /* high Speed Enable */
+#define                 SOFT_CONN  0x40       /* Soft connect */
+#define                ISO_UPDATE  0x80       /* Isochronous update */
+
+/* Bit masks for USB_INTRTX */
+
+#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
+#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
+#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
+#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
+#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
+#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
+#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
+#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRRX */
+
+#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
+#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
+#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
+#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
+#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
+#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
+#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRTXE */
+
+#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
+#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
+#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
+#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
+#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
+#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
+#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
+#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRRXE */
+
+#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
+#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
+#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
+#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
+#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
+#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
+#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRUSB */
+
+#define                 SUSPEND_B  0x1        /* Suspend indicator */
+#define                  RESUME_B  0x2        /* Resume indicator */
+#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
+#define                     SOF_B  0x8        /* Start of frame */
+#define                    CONN_B  0x10       /* Connection indicator */
+#define                  DISCON_B  0x20       /* Disconnect indicator */
+#define             SESSION_REQ_B  0x40       /* Session Request */
+#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
+
+/* Bit masks for USB_INTRUSBE */
+
+#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
+#define                 RESUME_BE  0x2        /* Resume indicator int enable */
+#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
+#define                    SOF_BE  0x8        /* Start of frame int enable */
+#define                   CONN_BE  0x10       /* Connection indicator int enable */
+#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
+#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
+#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
+
+/* Bit masks for USB_FRAME */
+
+#define              FRAME_NUMBER  0x7ff      /* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define                GLOBAL_ENA  0x1        /* enables USB module */
+#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
+#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
+#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
+#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
+#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
+#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
+#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
+#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
+#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
+#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
+#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
+#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
+#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
+#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define                   SESSION  0x1        /* session indicator */
+#define                  HOST_REQ  0x2        /* Host negotiation request */
+#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
+#define                     VBUS0  0x8        /* Vbus level indicator[0] */
+#define                     VBUS1  0x10       /* Vbus level indicator[1] */
+#define                     LSDEV  0x20       /* Low-speed indicator */
+#define                     FSDEV  0x40       /* Full or High-speed indicator */
+#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
+#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
+#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
+#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
+#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
+#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
+#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
+#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
+#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
+#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
+#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
+
+/* Bit masks for USB_CSR0 */
+
+#define                  RXPKTRDY  0x1        /* data packet receive indicator */
+#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
+#define                STALL_SENT  0x4        /* STALL handshake sent */
+#define                   DATAEND  0x8        /* Data end indicator */
+#define                  SETUPEND  0x10       /* Setup end */
+#define                 SENDSTALL  0x20       /* Send STALL handshake */
+#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
+#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
+#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
+#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
+#define                SETUPPKT_H  0x8        /* send Setup token host mode */
+#define                   ERROR_H  0x10       /* timeout error indicator host mode */
+#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
+#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
+#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
+
+/* Bit masks for USB_COUNT0 */
+
+#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
+#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
+#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
+#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
+#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
+#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
+#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
+#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
+#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
+#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
+#define                     ISO_T  0x4000     /* enable Isochronous transfers */
+#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_TH  0x4        /* error condition host mode */
+#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
+#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
+
+/* Bit masks for USB_TXCOUNT */
+
+#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
+#define               FIFO_FULL_R  0x2        /* FIFO not empty */
+#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
+#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
+#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
+#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
+#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
+#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
+#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
+#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
+#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
+#define                     ISO_R  0x4000     /* enable Isochronous transfers */
+#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
+#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
+#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
+#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
+#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
+#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
+
+/* Bit masks for USB_RXCOUNT */
+
+#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define            TARGET_EP_NO_T  0xf        /* EP number */
+#define                PROTOCOL_T  0xc        /* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define            TARGET_EP_NO_R  0xf        /* EP number */
+#define                PROTOCOL_R  0xc        /* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
+#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
+#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
+#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
+#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
+#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
+#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
+#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define                   DMA_ENA  0x1        /* DMA enable */
+#define                 DIRECTION  0x2        /* direction of DMA transfer */
+#define                      MODE  0x4        /* DMA Bus error */
+#define                   INT_ENA  0x8        /* Interrupt enable */
+#define                     EPNUM  0xf0       /* EP number */
+#define                  BUSERROR  0x100      /* DMA Bus error */
+
+/* Bit masks for USB_DMAxADDRHIGH */
+
+#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxADDRLOW */
+
+#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTHIGH */
+
+#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTLOW */
+
+#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for HMDMAx_CONTROL */
+
+#define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
+#define                       REP  0x2        /* Handshake MDMA Request Polarity */
+#define                       UTE  0x8        /* Urgency Threshold Enable */
+#define                       OIE  0x10       /* Overflow Interrupt Enable */
+#define                      BDIE  0x20       /* Block Done Interrupt Enable */
+#define                      MBDI  0x40       /* Mask Block Done Interrupt */
+#define                       DRQ  0x300      /* Handshake MDMA Request Type */
+#define                       RBC  0x1000     /* Force Reload of BCOUNT */
+#define                        PS  0x2000     /* Pin Status */
+#define                        OI  0x4000     /* Overflow Interrupt Generated */
+#define                       BDI  0x8000     /* Block Done Interrupt Generated */
+
+/* ******************************************* */
+/*     MULTI BIT MACRO ENUMERATIONS            */
+/* ******************************************* */
+
+
+#endif /* _DEF_BF548_H */
diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/include/asm-blackfin/mach-bf548/defBF548.h
index e46f568..1d7c96e 100644
--- a/include/asm-blackfin/mach-bf548/defBF548.h
+++ b/include/asm-blackfin/mach-bf548/defBF548.h
@@ -1010,9 +1010,9 @@
 #define                 DMA_READY  0x1        /* DMA Ready */
 #define                  FIFOFULL  0x2        /* FIFO Full */
 #define                 FIFOEMPTY  0x4        /* FIFO Empty */
-#define                  COMPLETE  0x8        /* DMA Complete */
+#define              DMA_COMPLETE  0x8        /* DMA Complete */
 #define                      HSHK  0x10       /* Host Handshake */
-#define                   TIMEOUT  0x20       /* Host Timeout */
+#define                 HSTIMEOUT  0x20       /* Host Timeout */
 #define                      HIRQ  0x40       /* Host Interrupt Request */
 #define                ALLOW_CNFG  0x80       /* Allow New Configuration */
 #define                   DMA_DIR  0x100      /* DMA Direction */
diff --git a/include/asm-blackfin/mach-bf548/dma.h b/include/asm-blackfin/mach-bf548/dma.h
index 4d97d3a..46ff31f 100644
--- a/include/asm-blackfin/mach-bf548/dma.h
+++ b/include/asm-blackfin/mach-bf548/dma.h
@@ -51,9 +51,13 @@
 #define CH_PIXC_OVERLAY		16
 #define CH_PIXC_OUTPUT		17
 #define CH_SPORT2_RX		18
+#define CH_UART2_RX		18
 #define CH_SPORT2_TX		19
+#define CH_UART2_TX		19
 #define CH_SPORT3_RX		20
+#define CH_UART3_RX		20
 #define CH_SPORT3_TX		21
+#define CH_UART3_TX		21
 #define CH_SDH			22
 #define CH_NFC			22
 #define CH_SPI2			23
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h
index c34507a..ad380d1 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/include/asm-blackfin/mach-bf548/irq.h
@@ -99,9 +99,13 @@ Events         (highest priority)  EMU         0
 #define IRQ_UART2_ERROR		BFIN_IRQ(31)	/* UART2 Status (Error) Interrupt */
 #define IRQ_CAN0_ERROR		BFIN_IRQ(32)	/* CAN0 Status (Error) Interrupt */
 #define IRQ_SPORT2_RX		BFIN_IRQ(33)	/* SPORT2 RX (DMA18) Interrupt */
+#define IRQ_UART2_RX		BFIN_IRQ(33)	/* UART2 RX (DMA18) Interrupt */
 #define IRQ_SPORT2_TX		BFIN_IRQ(34)	/* SPORT2 TX (DMA19) Interrupt */
+#define IRQ_UART2_TX		BFIN_IRQ(34)	/* UART2 TX (DMA19) Interrupt */
 #define IRQ_SPORT3_RX		BFIN_IRQ(35)	/* SPORT3 RX (DMA20) Interrupt */
+#define IRQ_UART3_RX		BFIN_IRQ(35)	/* UART3 RX (DMA20) Interrupt */
 #define IRQ_SPORT3_TX		BFIN_IRQ(36)	/* SPORT3 TX (DMA21) Interrupt */
+#define IRQ_UART3_TX		BFIN_IRQ(36)	/* UART3 TX (DMA21) Interrupt */
 #define IRQ_EPPI1		BFIN_IRQ(37)	/* EPP1 (DMA13) Interrupt */
 #define IRQ_EPPI2		BFIN_IRQ(38)	/* EPP2 (DMA14) Interrupt */
 #define IRQ_SPI1		BFIN_IRQ(39)	/* SPI1 (DMA5) Interrupt */
@@ -421,9 +425,13 @@ Events         (highest priority)  EMU         0
 /* IAR4 BIT FILEDS */
 #define IRQ_CAN0_ERR_POS	0
 #define IRQ_SPORT2_RX_POS	4
+#define IRQ_UART2_RX_POS	4
 #define IRQ_SPORT2_TX_POS	8
+#define IRQ_UART2_TX_POS	8
 #define IRQ_SPORT3_RX_POS	12
+#define IRQ_UART3_RX_POS	12
 #define IRQ_SPORT3_TX_POS	16
+#define IRQ_UART3_TX_POS	16
 #define IRQ_EPPI1_POS		20
 #define IRQ_EPPI2_POS		24
 #define IRQ_SPI1_POS		28
diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/include/asm-blackfin/mach-bf561/blackfin.h
index 562aee3..362617f 100644
--- a/include/asm-blackfin/mach-bf561/blackfin.h
+++ b/include/asm-blackfin/mach-bf561/blackfin.h
@@ -49,4 +49,24 @@
 #define bfin_read_FIO_INEN() bfin_read_FIO0_INEN()
 #define bfin_write_FIO_INEN(val) bfin_write_FIO0_INEN(val)
 
+
+#define SIC_IAR0 SICA_IAR0
+#define bfin_write_SIC_IMASK0 bfin_write_SICA_IMASK0
+#define bfin_write_SIC_IMASK1 bfin_write_SICA_IMASK1
+#define bfin_write_SIC_IWR0   bfin_write_SICA_IWR0
+#define bfin_write_SIC_IWR1   bfin_write_SICA_IWR1
+
+#define bfin_read_SIC_IMASK0 bfin_read_SICA_IMASK0
+#define bfin_read_SIC_IMASK1 bfin_read_SICA_IMASK1
+#define bfin_read_SIC_IWR0   bfin_read_SICA_IWR0
+#define bfin_read_SIC_IWR1   bfin_read_SICA_IWR1
+#define bfin_read_SIC_ISR0   bfin_read_SICA_ISR0
+#define bfin_read_SIC_ISR1   bfin_read_SICA_ISR1
+
+#define bfin_read_SIC_IMASK(x)		bfin_read32(SICA_IMASK0 + (x << 2))
+#define bfin_write_SIC_IMASK(x, val)	bfin_write32((SICA_IMASK0 + (x << 2)), val)
+#define bfin_read_SIC_ISR(x)		bfin_read32(SICA_ISR0 + (x << 2))
+#define bfin_write_SIC_ISR(x, val)	bfin_write32((SICA_ISR0 + (x << 2)), val)
+
+
 #endif				/* _MACH_BLACKFIN_H_ */
diff --git a/include/asm-blackfin/termios.h b/include/asm-blackfin/termios.h
index e31fe85..d50d063 100644
--- a/include/asm-blackfin/termios.h
+++ b/include/asm-blackfin/termios.h
@@ -39,24 +39,6 @@ struct termio {
 
 /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
 
-/* line disciplines */
-#define N_TTY		0
-#define N_SLIP		1
-#define N_MOUSE		2
-#define N_PPP		3
-#define N_STRIP		4
-#define N_AX25		5
-#define N_X25		6	/* X.25 async */
-#define N_6PACK		7
-#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964		9	/* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
-#define N_IRDA		11	/* Linux IR - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
-#define N_HDLC		13	/* synchronous HDLC */
-#define N_SYNC_PPP	14	/* synchronous PPP */
-#define N_HCI		15	/* Bluetooth HCI UART */
-
 #ifdef __KERNEL__
 
 /*	intr=^C		quit=^\		erase=del	kill=^U
diff --git a/include/asm-blackfin/trace.h b/include/asm-blackfin/trace.h
index 6313aac..ef18afb 100644
--- a/include/asm-blackfin/trace.h
+++ b/include/asm-blackfin/trace.h
@@ -46,42 +46,47 @@ extern unsigned long software_trace_buff[];
 
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 
-#define TRACE_BUFFER_START(preg, dreg) trace_buffer_start(preg, dreg)
-#define TRACE_BUFFER_STOP(preg, dreg)  trace_buffer_stop(preg, dreg)
-
 #define trace_buffer_stop(preg, dreg)	\
 	preg.L = LO(TBUFCTL);		\
 	preg.H = HI(TBUFCTL);		\
 	dreg = 0x1;			\
 	[preg] = dreg;
 
-#define trace_buffer_start(preg, dreg)	\
-	preg.L = LO(TBUFCTL);		\
-	preg.H = HI(TBUFCTL);		\
-	dreg = BFIN_TRACE_ON;		\
-	[preg] = dreg;
-
 #define trace_buffer_init(preg, dreg) \
 	preg.L = LO(TBUFCTL);         \
 	preg.H = HI(TBUFCTL);         \
 	dreg = BFIN_TRACE_INIT;       \
 	[preg] = dreg;
 
+#define trace_buffer_save(preg, dreg) \
+	preg.L = LO(TBUFCTL); \
+	preg.H = HI(TBUFCTL); \
+	dreg = [preg]; \
+	[sp++] = dreg; \
+	dreg = 0x1; \
+	[preg] = dreg;
+
+#define trace_buffer_restore(preg, dreg) \
+	preg.L = LO(TBUFCTL); \
+	preg.H = HI(TBUFCTL); \
+	dreg = [sp--]; \
+	[preg] = dreg;
+
 #else /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
 
 #define trace_buffer_stop(preg, dreg)
-#define trace_buffer_start(preg, dreg)
 #define trace_buffer_init(preg, dreg)
+#define trace_buffer_save(preg, dreg)
+#define trace_buffer_restore(preg, dreg)
 
 #endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
 
 #ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
-# define DEBUG_START_HWTRACE(preg, dreg) trace_buffer_start(preg, dreg)
-# define DEBUG_STOP_HWTRACE(preg, dreg) trace_buffer_stop(preg, dreg)
-
+# define DEBUG_HWTRACE_SAVE(preg, dreg)    trace_buffer_save(preg, dreg)
+# define DEBUG_HWTRACE_RESTORE(preg, dreg) trace_buffer_restore(preg, dreg)
 #else
-# define DEBUG_START_HWTRACE(preg, dreg)
-# define DEBUG_STOP_HWTRACE(preg, dreg)
+# define DEBUG_HWTRACE_SAVE(preg, dreg)
+# define DEBUG_HWTRACE_RESTORE(preg, dreg)
 #endif
 
 #endif /* __ASSEMBLY__ */