t1024/dts: add usdpaa and capwap device tree

- Add usdpaa device tree for t1024qds and t1024rdb.
- Add default capwap dts for t1024qds and t1024rdb.

Signed-off-by: Vakul Garg <vakul@freescale.com>
Signed-off-by: Pan Jiafei <Jiafei.Pan@freescale.com>
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Change-Id: Ic9da808112675f0c1db67307c96461b0b69f7260
Reviewed-on: http://git.am.freescale.net:8181/21427
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>

4 files changed, 409 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/t1024qds-usdpaa-capwap.dts b/arch/powerpc/boot/dts/t1024qds-usdpaa-capwap.dts
new file mode 100644
index 0000000..979db19
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1024qds-usdpaa-capwap.dts
@@ -0,0 +1,112 @@
+/*
+ * T1024QDS CAPWAP Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t1024qds.dts"
+
+/ {
+	bp7: buffer-pool@7 {
+		compatible = "fsl,t1024-bpool", "fsl,bpool";
+		fsl,bpid = <7>;
+		fsl,bpool-ethernet-cfg = <0 16384 0 2112 0 0>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+		fsl,bpool-ethernet-seeds = <0xdeadbeef>;
+	};
+
+	fsl,dpaa {
+		/* This DPAA port is used as CAPWAP Ethernet Port, which can be set when running
+		   the use case by "-a 1,2", "1" is MAC ID, "2" is MAC type, the valid value of
+		   type is: "1"--1G MAC, "2"--10G MAC. */
+		ethernet@0 {
+			compatible = "fsl,t1024-dpa-ethernet-shared", "fsl,dpa-ethernet-shared";
+			fsl,bman-buffer-pools = <&bp7>;
+			fsl,qman-frame-queues-rx = <0x50 1 0x51 1 0x2000 3>;
+			fsl,qman-frame-queues-tx = <0x70 1 0x71 1 0x3000 8>;
+		};
+		/* The following two ports are used as Non-CAPWAP Ethernet ports, and should be
+		   uncommented when the case running in Mode 2, using the following parameters
+		   to set when running the case: "-s 3,1 -u 4,1 -m 2", "-m 2" means the case
+		   runs in mode 2, "-s" and "-u" sperify two DPAA port, format is "MAC-ID,type",the
+		   valid value of type is: "1"--1G MAC, "2"--10G MAC*/
+/*
+		ethernet@2 {
+			compatible = "fsl,t1024-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7>;
+			fsl,qman-frame-queues-rx = <0x58 1 0x59 1>;
+			fsl,qman-frame-queues-tx = <0x72 1 0x73 1>;
+		};
+		ethernet@3 {
+			compatible = "fsl,t1024-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7>;
+			fsl,qman-frame-queues-rx = <0x60 1 0x61 1 >;
+			fsl,qman-frame-queues-tx = <0x74 1 0x75 1 >;
+		};
+*/
+		/* The following OP is used as outbound OP*/
+		dpa-fman0-oh@3 {
+			compatible = "fsl,dpa-oh";
+			fsl,bman-buffer-pools = <&bp7>;
+			/* Define frame queues for the OH port*/
+			/* <OH Rx error, OH Rx default> */
+			fsl,qman-frame-queues-oh = <0x52 1 0x53 1>;
+			fsl,fman-oh-port = <&fman0_oh3>;
+		};
+		/* The following OP is used as inbound OP*/
+		dpa-fman0-oh@4 {
+			compatible = "fsl,dpa-oh";
+			fsl,bman-buffer-pools = <&bp7>;
+			/* Define frame queues for the OH port*/
+			/* <OH Rx error, OH Rx default> */
+			fsl,qman-frame-queues-oh = <0x54 1 0x55 1>;
+			fsl,fman-oh-port = <&fman0_oh4>;
+		};
+	};
+
+	soc: soc@ffe000000 {
+		fman0: fman@400000 {
+			fman-extended-args {
+				compatible = "fsl,fman-extended-args";
+				cell-index = <0>;
+				/* Set 128bytes manip extra space for outbound(frgamentation) OP */
+				args0 {
+					cell-index = <2>;
+					compatible = "fsl,fman-port-op-extended-args";
+					/* manip_extra_space, data_align */
+					buffer-layout = <0x80 0x40>;
+				};
+			};
+
+		};
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/t1024qds-usdpaa.dts b/arch/powerpc/boot/dts/t1024qds-usdpaa.dts
new file mode 100644
index 0000000..340c6a6
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1024qds-usdpaa.dts
@@ -0,0 +1,92 @@
+/*
+ * T1024QDS USDPAA Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t1024qds.dts"
+
+/ {
+	/* NB: "bpool-ethernet-seeds" is not set to avoid buffer seeding,
+	 * because apps seed these pools with buffers allocated at
+	 * run-time.
+	 * HOWEVER, the kernel driver requires the buffer-size so
+	 * "fsl,bpool-ethernet-cfg" is set. It also mis-interprets
+	 * things if the base-address is zero (hence the 0xdeadbeef
+	 * values).
+	 */
+	bp7: buffer-pool@7 {
+		compatible = "fsl,t1024-bpool", "fsl,bpool";
+		fsl,bpid = <7>;
+		fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
+		fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
+	};
+	bp8: buffer-pool@8 {
+		compatible = "fsl,t1024-bpool", "fsl,bpool";
+		fsl,bpid = <8>;
+		fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+	bp9: buffer-pool@9 {
+		compatible = "fsl,t1024-bpool", "fsl,bpool";
+		fsl,bpid = <9>;
+		fsl,bpool-ethernet-cfg = <0 0 0 1728 0 0xfeedabba>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+
+	fsl,dpaa {
+		ethernet@0 {
+			compatible = "fsl,t1024-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x5a 1 0x5b 1>;
+			fsl,qman-frame-queues-tx = <0x7a 1 0x7b 1>;
+		};
+		ethernet@2 {
+			compatible = "fsl,t1024-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
+			fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
+		};
+		ethernet@3 {
+			compatible = "fsl,t1024-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x56 1 0x57 1>;
+			fsl,qman-frame-queues-tx = <0x76 1 0x77 1>;
+		};
+		dpa-fman0-oh@1 {
+			compatible = "fsl,dpa-oh";
+			/* Define frame queues for the OH port*/
+			/* <OH Rx error, OH Rx default> */
+			fsl,qman-frame-queues-oh = <0x68 1 0x69 1>;
+			fsl,fman-oh-port = <&fman0_oh1>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/t1024rdb-usdpaa-capwap.dts b/arch/powerpc/boot/dts/t1024rdb-usdpaa-capwap.dts
new file mode 100644
index 0000000..33d2a27
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1024rdb-usdpaa-capwap.dts
@@ -0,0 +1,112 @@
+/*
+ * T1024RDB CAPWAP Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t1024rdb.dts"
+
+/ {
+	bp7: buffer-pool@7 {
+		compatible = "fsl,t1024-bpool", "fsl,bpool";
+		fsl,bpid = <7>;
+		fsl,bpool-ethernet-cfg = <0 16384 0 2112 0 0>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+		fsl,bpool-ethernet-seeds = <0xdeadbeef>;
+	};
+
+	fsl,dpaa {
+		/* This DPAA port is used as CAPWAP Ethernet Port, which can be set when running
+		   the use case by "-a 1,2", "1" is MAC ID, "2" is MAC type, the valid value of
+		   type is: "1"--1G MAC, "2"--10G MAC. */
+		ethernet@0 {
+			compatible = "fsl,t1024-dpa-ethernet-shared", "fsl,dpa-ethernet-shared";
+			fsl,bman-buffer-pools = <&bp7>;
+			fsl,qman-frame-queues-rx = <0x50 1 0x51 1 0x2000 3>;
+			fsl,qman-frame-queues-tx = <0x70 1 0x71 1 0x3000 8>;
+		};
+		/* The following two ports are used as Non-CAPWAP Ethernet ports, and should be
+		   uncommented when the case running in Mode 2, using the following parameters
+		   to set when running the case: "-s 3,1 -u 4,1 -m 2", "-m 2" means the case
+		   runs in mode 2, "-s" and "-u" sperify two DPAA port, format is "MAC-ID,type",the
+		   valid value of type is: "1"--1G MAC, "2"--10G MAC*/
+/*
+		ethernet@2 {
+			compatible = "fsl,t1024-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7>;
+			fsl,qman-frame-queues-rx = <0x58 1 0x59 1>;
+			fsl,qman-frame-queues-tx = <0x72 1 0x73 1>;
+		};
+		ethernet@3 {
+			compatible = "fsl,t1024-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7>;
+			fsl,qman-frame-queues-rx = <0x60 1 0x61 1 >;
+			fsl,qman-frame-queues-tx = <0x74 1 0x75 1 >;
+		};
+*/
+		/* The following OP is used as outbound OP*/
+		dpa-fman0-oh@3 {
+			compatible = "fsl,dpa-oh";
+			fsl,bman-buffer-pools = <&bp7>;
+			/* Define frame queues for the OH port*/
+			/* <OH Rx error, OH Rx default> */
+			fsl,qman-frame-queues-oh = <0x52 1 0x53 1>;
+			fsl,fman-oh-port = <&fman0_oh3>;
+		};
+		/* The following OP is used as inbound OP*/
+		dpa-fman0-oh@4 {
+			compatible = "fsl,dpa-oh";
+			fsl,bman-buffer-pools = <&bp7>;
+			/* Define frame queues for the OH port*/
+			/* <OH Rx error, OH Rx default> */
+			fsl,qman-frame-queues-oh = <0x54 1 0x55 1>;
+			fsl,fman-oh-port = <&fman0_oh4>;
+		};
+	};
+
+	soc: soc@ffe000000 {
+		fman0: fman@400000 {
+			fman-extended-args {
+				compatible = "fsl,fman-extended-args";
+				cell-index = <0>;
+				/* Set 128bytes manip extra space for outbound(frgamentation) OP */
+				args0 {
+					cell-index = <2>;
+					compatible = "fsl,fman-port-op-extended-args";
+					/* manip_extra_space, data_align */
+					buffer-layout = <0x80 0x40>;
+				};
+			};
+
+		};
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/t1024rdb-usdpaa.dts b/arch/powerpc/boot/dts/t1024rdb-usdpaa.dts
new file mode 100644
index 0000000..7f0572e
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1024rdb-usdpaa.dts
@@ -0,0 +1,93 @@
+/*
+ * T1024RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t1024rdb.dts"
+
+/ {
+	/* NB: "bpool-ethernet-seeds" is not set to avoid buffer seeding,
+	 * because apps seed these pools with buffers allocated at
+	 * run-time.
+	 * HOWEVER, the kernel driver requires the buffer-size so
+	 * "fsl,bpool-ethernet-cfg" is set. It also mis-interprets
+	 * things if the base-address is zero (hence the 0xdeadbeef
+	 * values).
+	 */
+	bp7: buffer-pool@7 {
+		compatible = "fsl,t1024-bpool", "fsl,bpool";
+		fsl,bpid = <7>;
+		fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
+		fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
+	};
+	bp8: buffer-pool@8 {
+		compatible = "fsl,t1024-bpool", "fsl,bpool";
+		fsl,bpid = <8>;
+		fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+	bp9: buffer-pool@9 {
+		compatible = "fsl,t1024-bpool", "fsl,bpool";
+		fsl,bpid = <9>;
+		fsl,bpool-ethernet-cfg = <0 0 0 1728 0 0xfeedabba>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+
+	fsl,dpaa {
+		ethernet@0 {
+			compatible = "fsl,t1024-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x5a 1 0x5b 1>;
+			fsl,qman-frame-queues-tx = <0x7a 1 0x7b 1>;
+		};
+
+		ethernet@2 {
+			compatible = "fsl,t1024-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
+			fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
+		};
+		ethernet@3 {
+			compatible = "fsl,t1024-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x56 1 0x57 1>;
+			fsl,qman-frame-queues-tx = <0x76 1 0x77 1>;
+		};
+		dpa-fman0-oh@1 {
+			compatible = "fsl,dpa-oh";
+			/* Define frame queues for the OH port*/
+			/* <OH Rx error, OH Rx default> */
+			fsl,qman-frame-queues-oh = <0x68 1 0x69 1>;
+			fsl,fman-oh-port = <&fman0_oh1>;
+		};
+	};
+};