Merge tag 'for-3.7-rc1' of git://gitorious.org/linux-pwm/linux-pwm

Pull pwm changes from Thierry Reding:
 "All legacy PWM providers have now been moved to the PWM subsystem.
  The plan for 3.8 is to adapt all board files to provide a lookup table
  for PWM devices in order to get rid of the global namespace.
  Subsequently, users of the legacy pwm_request() and pwm_free()
  functions can be migrated to the new pwm_get() and pwm_put()
  functions.  Once this has been completed, the legacy API and the
  compatibility code in the core can be removed.

  In addition to the above, these changes also add support for
  configuring the polarity of a PWM signal (currently only supported on
  ECAP and EHRPWM) and include a much needed rework of the i.MX driver.
  Managed functions to obtain and release a PWM device (devm_pwm_get()
  and devm_pwm_put()) have been added and the pwm-backlight driver has
  been updated to use them.  If the PWM subsystem hasn't been enabled,
  dummy functions are provided that allow the subsystem to safely
  compile out.

  Some common checks on input parameters have been moved to the core and
  removed from the drivers.  Finally, a small fix corrects the
  description of the PWM specifier's second cell in the device tree
  representation."

* tag 'for-3.7-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (23 commits)
  pwm: dt: Fix description of second PWM cell
  pwm: Check for negative duty-cycle and period
  pwm: Add Ingenic JZ4740 support
  MIPS: JZ4740: Export timer API
  pwm: Move PUV3 PWM driver to PWM framework
  unicore32: pwm: Use managed resource allocations
  unicore32: pwm: Remove unnecessary indirection
  unicore32: pwm: Use module_platform_driver()
  unicore32: pwm: Properly remap memory-mapped registers
  pwm-backlight: Use devm_pwm_get() instead of pwm_get()
  pwm: Move AB8500 PWM driver to PWM framework
  pwm: Fix compilation error when CONFIG_PWM is not defined
  pwm: i.MX: fix clock lookup
  pwm: i.MX: use per clock unconditionally
  pwm: i.MX: add devicetree support
  pwm: i.MX: Use module_platform_driver
  pwm: i.MX: add functions to enable/disable pwm.
  pwm: i.MX: remove unnecessary if in pwm_[en|dis]able
  pwm: i.MX: factor out SoC specific functions
  pwm: pwm-tiehrpwm: Add support for configuring polarity of PWM
  ...

35 files changed, 1069 insertions, 822 deletions

diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt
new file mode 100644
index 0000000..8522bfb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/imx-pwm.txt
@@ -0,0 +1,17 @@
+Freescale i.MX PWM controller
+
+Required properties:
+- compatible: should be "fsl,<soc>-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2.  The first cell specifies the per-chip index
+  of the PWM to use and the second cell is the period in nanoseconds.
+- interrupts: The interrupt for the pwm controller
+
+Example:
+
+pwm1: pwm@53fb4000 {
+	#pwm-cells = <2>;
+	compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+	reg = <0x53fb4000 0x4000>;
+	interrupts = <61>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt
index 11963e4..9e3f8f1 100644
--- a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt
@@ -4,7 +4,7 @@ Required properties:
 - compatible: should be "fsl,imx23-pwm"
 - reg: physical base address and length of the controller's registers
 - #pwm-cells: should be 2.  The first cell specifies the per-chip index
-  of the PWM to use and the second cell is the duty cycle in nanoseconds.
+  of the PWM to use and the second cell is the period in nanoseconds.
 - fsl,pwm-number: the number of PWM devices
 
 Example:
diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
index bbbeedb..01438ec 100644
--- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
@@ -7,7 +7,7 @@ Required properties:
 - reg: physical base address and length of the controller's registers
 - #pwm-cells: On Tegra the number of cells used to specify a PWM is 2. The
   first cell specifies the per-chip index of the PWM to use and the second
-  cell is the duty cycle in nanoseconds.
+  cell is the period in nanoseconds.
 
 Example:
 
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 950856b..43cff70 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -284,3 +284,7 @@ CLOCK
 PINCTRL
   devm_pinctrl_get()
   devm_pinctrl_put()
+
+PWM
+  devm_pwm_get()
+  devm_pwm_put()
diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt
index 554290e..7d2b4c9 100644
--- a/Documentation/pwm.txt
+++ b/Documentation/pwm.txt
@@ -36,7 +36,8 @@ Legacy users can request a PWM device using pwm_request() and free it
 after usage with pwm_free().
 
 New users should use the pwm_get() function and pass to it the consumer
-device or a consumer name. pwm_put() is used to free the PWM device.
+device or a consumer name. pwm_put() is used to free the PWM device. Managed
+variants of these functions, devm_pwm_get() and devm_pwm_put(), also exist.
 
 After being requested a PWM has to be configured using:
 
diff --git a/arch/mips/include/asm/mach-jz4740/platform.h b/arch/mips/include/asm/mach-jz4740/platform.h
index 564ab81..163e81d 100644
--- a/arch/mips/include/asm/mach-jz4740/platform.h
+++ b/arch/mips/include/asm/mach-jz4740/platform.h
@@ -31,6 +31,7 @@ extern struct platform_device jz4740_pcm_device;
 extern struct platform_device jz4740_codec_device;
 extern struct platform_device jz4740_adc_device;
 extern struct platform_device jz4740_wdt_device;
+extern struct platform_device jz4740_pwm_device;
 
 void jz4740_serial_device_register(void);
 
diff --git a/arch/mips/include/asm/mach-jz4740/timer.h b/arch/mips/include/asm/mach-jz4740/timer.h
index 9baa03c..a7759fb 100644
--- a/arch/mips/include/asm/mach-jz4740/timer.h
+++ b/arch/mips/include/asm/mach-jz4740/timer.h
@@ -16,7 +16,120 @@
 #ifndef __ASM_MACH_JZ4740_TIMER
 #define __ASM_MACH_JZ4740_TIMER
 
+#define JZ_REG_TIMER_STOP		0x0C
+#define JZ_REG_TIMER_STOP_SET		0x1C
+#define JZ_REG_TIMER_STOP_CLEAR		0x2C
+#define JZ_REG_TIMER_ENABLE		0x00
+#define JZ_REG_TIMER_ENABLE_SET		0x04
+#define JZ_REG_TIMER_ENABLE_CLEAR	0x08
+#define JZ_REG_TIMER_FLAG		0x10
+#define JZ_REG_TIMER_FLAG_SET		0x14
+#define JZ_REG_TIMER_FLAG_CLEAR		0x18
+#define JZ_REG_TIMER_MASK		0x20
+#define JZ_REG_TIMER_MASK_SET		0x24
+#define JZ_REG_TIMER_MASK_CLEAR		0x28
+
+#define JZ_REG_TIMER_DFR(x) (((x) * 0x10) + 0x30)
+#define JZ_REG_TIMER_DHR(x) (((x) * 0x10) + 0x34)
+#define JZ_REG_TIMER_CNT(x) (((x) * 0x10) + 0x38)
+#define JZ_REG_TIMER_CTRL(x) (((x) * 0x10) + 0x3C)
+
+#define JZ_TIMER_IRQ_HALF(x) BIT((x) + 0x10)
+#define JZ_TIMER_IRQ_FULL(x) BIT(x)
+
+#define JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN	BIT(9)
+#define JZ_TIMER_CTRL_PWM_ACTIVE_LOW		BIT(8)
+#define JZ_TIMER_CTRL_PWM_ENABLE		BIT(7)
+#define JZ_TIMER_CTRL_PRESCALE_MASK		0x1c
+#define JZ_TIMER_CTRL_PRESCALE_OFFSET		0x3
+#define JZ_TIMER_CTRL_PRESCALE_1		(0 << 3)
+#define JZ_TIMER_CTRL_PRESCALE_4		(1 << 3)
+#define JZ_TIMER_CTRL_PRESCALE_16		(2 << 3)
+#define JZ_TIMER_CTRL_PRESCALE_64		(3 << 3)
+#define JZ_TIMER_CTRL_PRESCALE_256		(4 << 3)
+#define JZ_TIMER_CTRL_PRESCALE_1024		(5 << 3)
+
+#define JZ_TIMER_CTRL_PRESCALER(x) ((x) << JZ_TIMER_CTRL_PRESCALE_OFFSET)
+
+#define JZ_TIMER_CTRL_SRC_EXT		BIT(2)
+#define JZ_TIMER_CTRL_SRC_RTC		BIT(1)
+#define JZ_TIMER_CTRL_SRC_PCLK		BIT(0)
+
+extern void __iomem *jz4740_timer_base;
+void __init jz4740_timer_init(void);
+
 void jz4740_timer_enable_watchdog(void);
 void jz4740_timer_disable_watchdog(void);
 
+static inline void jz4740_timer_stop(unsigned int timer)
+{
+	writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
+}
+
+static inline void jz4740_timer_start(unsigned int timer)
+{
+	writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
+}
+
+static inline bool jz4740_timer_is_enabled(unsigned int timer)
+{
+	return readb(jz4740_timer_base + JZ_REG_TIMER_ENABLE) & BIT(timer);
+}
+
+static inline void jz4740_timer_enable(unsigned int timer)
+{
+	writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_SET);
+}
+
+static inline void jz4740_timer_disable(unsigned int timer)
+{
+	writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_CLEAR);
+}
+
+static inline void jz4740_timer_set_period(unsigned int timer, uint16_t period)
+{
+	writew(period, jz4740_timer_base + JZ_REG_TIMER_DFR(timer));
+}
+
+static inline void jz4740_timer_set_duty(unsigned int timer, uint16_t duty)
+{
+	writew(duty, jz4740_timer_base + JZ_REG_TIMER_DHR(timer));
+}
+
+static inline void jz4740_timer_set_count(unsigned int timer, uint16_t count)
+{
+	writew(count, jz4740_timer_base + JZ_REG_TIMER_CNT(timer));
+}
+
+static inline uint16_t jz4740_timer_get_count(unsigned int timer)
+{
+	return readw(jz4740_timer_base + JZ_REG_TIMER_CNT(timer));
+}
+
+static inline void jz4740_timer_ack_full(unsigned int timer)
+{
+	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR);
+}
+
+static inline void jz4740_timer_irq_full_enable(unsigned int timer)
+{
+	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR);
+	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_CLEAR);
+}
+
+static inline void jz4740_timer_irq_full_disable(unsigned int timer)
+{
+	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_SET);
+}
+
+static inline void jz4740_timer_set_ctrl(unsigned int timer, uint16_t ctrl)
+{
+	writew(ctrl, jz4740_timer_base + JZ_REG_TIMER_CTRL(timer));
+}
+
+static inline uint16_t jz4740_timer_get_ctrl(unsigned int timer)
+{
+	return readw(jz4740_timer_base + JZ_REG_TIMER_CTRL(timer));
+}
+
 #endif
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 3e7141f..4689030 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -7,6 +7,3 @@ config JZ4740_QI_LB60
 	bool "Qi Hardware Ben NanoNote"
 
 endchoice
-
-config HAVE_PWM
-	bool
diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
index e44abea..63bad0e 100644
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -5,7 +5,7 @@
 # Object file lists.
 
 obj-y += prom.o irq.o time.o reset.o setup.o dma.o \
-	gpio.o clock.o platform.o timer.o pwm.o serial.o
+	gpio.o clock.o platform.o timer.o serial.o
 
 obj-$(CONFIG_DEBUG_FS) += clock-debugfs.o
 
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 9a3d9de..43d964d 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -437,6 +437,7 @@ static struct platform_device *jz_platform_devices[] __initdata = {
 	&jz4740_codec_device,
 	&jz4740_rtc_device,
 	&jz4740_adc_device,
+	&jz4740_pwm_device,
 	&qi_lb60_gpio_keys,
 	&qi_lb60_pwm_beeper,
 	&qi_lb60_charger_device,
diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
index e342ed4..6d14dcd 100644
--- a/arch/mips/jz4740/platform.c
+++ b/arch/mips/jz4740/platform.c
@@ -323,3 +323,9 @@ struct platform_device jz4740_wdt_device = {
 	.num_resources = ARRAY_SIZE(jz4740_wdt_resources),
 	.resource      = jz4740_wdt_resources,
 };
+
+/* PWM */
+struct platform_device jz4740_pwm_device = {
+	.name = "jz4740-pwm",
+	.id   = -1,
+};
diff --git a/arch/mips/jz4740/pwm.c b/arch/mips/jz4740/pwm.c
deleted file mode 100644
index a26a6fa..0000000
--- a/arch/mips/jz4740/pwm.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  JZ4740 platform PWM support
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/pwm.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-jz4740/gpio.h>
-#include "timer.h"
-
-static struct clk *jz4740_pwm_clk;
-
-DEFINE_MUTEX(jz4740_pwm_mutex);
-
-struct pwm_device {
-	unsigned int id;
-	unsigned int gpio;
-	bool used;
-};
-
-static struct pwm_device jz4740_pwm_list[] = {
-	{ 2, JZ_GPIO_PWM2, false },
-	{ 3, JZ_GPIO_PWM3, false },
-	{ 4, JZ_GPIO_PWM4, false },
-	{ 5, JZ_GPIO_PWM5, false },
-	{ 6, JZ_GPIO_PWM6, false },
-	{ 7, JZ_GPIO_PWM7, false },
-};
-
-struct pwm_device *pwm_request(int id, const char *label)
-{
-	int ret = 0;
-	struct pwm_device *pwm;
-
-	if (id < 2 || id > 7 || !jz4740_pwm_clk)
-		return ERR_PTR(-ENODEV);
-
-	mutex_lock(&jz4740_pwm_mutex);
-
-	pwm = &jz4740_pwm_list[id - 2];
-	if (pwm->used)
-		ret = -EBUSY;
-	else
-		pwm->used = true;
-
-	mutex_unlock(&jz4740_pwm_mutex);
-
-	if (ret)
-		return ERR_PTR(ret);
-
-	ret = gpio_request(pwm->gpio, label);
-
-	if (ret) {
-		printk(KERN_ERR "Failed to request pwm gpio: %d\n", ret);
-		pwm->used = false;
-		return ERR_PTR(ret);
-	}
-
-	jz_gpio_set_function(pwm->gpio, JZ_GPIO_FUNC_PWM);
-
-	jz4740_timer_start(id);
-
-	return pwm;
-}
-
-void pwm_free(struct pwm_device *pwm)
-{
-	pwm_disable(pwm);
-	jz4740_timer_set_ctrl(pwm->id, 0);
-
-	jz_gpio_set_function(pwm->gpio, JZ_GPIO_FUNC_NONE);
-	gpio_free(pwm->gpio);
-
-	jz4740_timer_stop(pwm->id);
-
-	pwm->used = false;
-}
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long long tmp;
-	unsigned long period, duty;
-	unsigned int prescaler = 0;
-	unsigned int id = pwm->id;
-	uint16_t ctrl;
-	bool is_enabled;
-
-	if (duty_ns < 0 || duty_ns > period_ns)
-		return -EINVAL;
-
-	tmp = (unsigned long long)clk_get_rate(jz4740_pwm_clk) * period_ns;
-	do_div(tmp, 1000000000);
-	period = tmp;
-
-	while (period > 0xffff && prescaler < 6) {
-		period >>= 2;
-		++prescaler;
-	}
-
-	if (prescaler == 6)
-		return -EINVAL;
-
-	tmp = (unsigned long long)period * duty_ns;
-	do_div(tmp, period_ns);
-	duty = period - tmp;
-
-	if (duty >= period)
-		duty = period - 1;
-
-	is_enabled = jz4740_timer_is_enabled(id);
-	if (is_enabled)
-		pwm_disable(pwm);
-
-	jz4740_timer_set_count(id, 0);
-	jz4740_timer_set_duty(id, duty);
-	jz4740_timer_set_period(id, period);
-
-	ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT |
-		JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
-
-	jz4740_timer_set_ctrl(id, ctrl);
-
-	if (is_enabled)
-		pwm_enable(pwm);
-
-	return 0;
-}
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	uint32_t ctrl = jz4740_timer_get_ctrl(pwm->id);
-
-	ctrl |= JZ_TIMER_CTRL_PWM_ENABLE;
-	jz4740_timer_set_ctrl(pwm->id, ctrl);
-	jz4740_timer_enable(pwm->id);
-
-	return 0;
-}
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	uint32_t ctrl = jz4740_timer_get_ctrl(pwm->id);
-
-	ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE;
-	jz4740_timer_disable(pwm->id);
-	jz4740_timer_set_ctrl(pwm->id, ctrl);
-}
-
-static int __init jz4740_pwm_init(void)
-{
-	int ret = 0;
-
-	jz4740_pwm_clk = clk_get(NULL, "ext");
-
-	if (IS_ERR(jz4740_pwm_clk)) {
-		ret = PTR_ERR(jz4740_pwm_clk);
-		jz4740_pwm_clk = NULL;
-	}
-
-	return ret;
-}
-subsys_initcall(jz4740_pwm_init);
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index f83c2dd..39bb4bb 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -20,10 +20,10 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach-jz4740/irq.h>
+#include <asm/mach-jz4740/timer.h>
 #include <asm/time.h>
 
 #include "clock.h"
-#include "timer.h"
 
 #define TIMER_CLOCKEVENT 0
 #define TIMER_CLOCKSOURCE 1
diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c
index 654d5c3..22f11d7 100644
--- a/arch/mips/jz4740/timer.c
+++ b/arch/mips/jz4740/timer.c
@@ -17,11 +17,11 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 
-#include "timer.h"
-
 #include <asm/mach-jz4740/base.h>
+#include <asm/mach-jz4740/timer.h>
 
 void __iomem *jz4740_timer_base;
+EXPORT_SYMBOL_GPL(jz4740_timer_base);
 
 void jz4740_timer_enable_watchdog(void)
 {
diff --git a/arch/mips/jz4740/timer.h b/arch/mips/jz4740/timer.h
deleted file mode 100644
index fca3994..0000000
--- a/arch/mips/jz4740/timer.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  JZ4740 platform timer support
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __MIPS_JZ4740_TIMER_H__
-#define __MIPS_JZ4740_TIMER_H__
-
-#include <linux/module.h>
-#include <linux/io.h>
-
-#define JZ_REG_TIMER_STOP		0x0C
-#define JZ_REG_TIMER_STOP_SET		0x1C
-#define JZ_REG_TIMER_STOP_CLEAR		0x2C
-#define JZ_REG_TIMER_ENABLE		0x00
-#define JZ_REG_TIMER_ENABLE_SET		0x04
-#define JZ_REG_TIMER_ENABLE_CLEAR	0x08
-#define JZ_REG_TIMER_FLAG		0x10
-#define JZ_REG_TIMER_FLAG_SET		0x14
-#define JZ_REG_TIMER_FLAG_CLEAR		0x18
-#define JZ_REG_TIMER_MASK		0x20
-#define JZ_REG_TIMER_MASK_SET		0x24
-#define JZ_REG_TIMER_MASK_CLEAR		0x28
-
-#define JZ_REG_TIMER_DFR(x) (((x) * 0x10) + 0x30)
-#define JZ_REG_TIMER_DHR(x) (((x) * 0x10) + 0x34)
-#define JZ_REG_TIMER_CNT(x) (((x) * 0x10) + 0x38)
-#define JZ_REG_TIMER_CTRL(x) (((x) * 0x10) + 0x3C)
-
-#define JZ_TIMER_IRQ_HALF(x) BIT((x) + 0x10)
-#define JZ_TIMER_IRQ_FULL(x) BIT(x)
-
-#define JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN	BIT(9)
-#define JZ_TIMER_CTRL_PWM_ACTIVE_LOW		BIT(8)
-#define JZ_TIMER_CTRL_PWM_ENABLE		BIT(7)
-#define JZ_TIMER_CTRL_PRESCALE_MASK		0x1c
-#define JZ_TIMER_CTRL_PRESCALE_OFFSET		0x3
-#define JZ_TIMER_CTRL_PRESCALE_1		(0 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_4		(1 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_16		(2 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_64		(3 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_256		(4 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_1024		(5 << 3)
-
-#define JZ_TIMER_CTRL_PRESCALER(x) ((x) << JZ_TIMER_CTRL_PRESCALE_OFFSET)
-
-#define JZ_TIMER_CTRL_SRC_EXT		BIT(2)
-#define JZ_TIMER_CTRL_SRC_RTC		BIT(1)
-#define JZ_TIMER_CTRL_SRC_PCLK		BIT(0)
-
-extern void __iomem *jz4740_timer_base;
-void __init jz4740_timer_init(void);
-
-static inline void jz4740_timer_stop(unsigned int timer)
-{
-	writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
-}
-
-static inline void jz4740_timer_start(unsigned int timer)
-{
-	writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
-}
-
-static inline bool jz4740_timer_is_enabled(unsigned int timer)
-{
-	return readb(jz4740_timer_base + JZ_REG_TIMER_ENABLE) & BIT(timer);
-}
-
-static inline void jz4740_timer_enable(unsigned int timer)
-{
-	writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_SET);
-}
-
-static inline void jz4740_timer_disable(unsigned int timer)
-{
-	writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_CLEAR);
-}
-
-
-static inline void jz4740_timer_set_period(unsigned int timer, uint16_t period)
-{
-	writew(period, jz4740_timer_base + JZ_REG_TIMER_DFR(timer));
-}
-
-static inline void jz4740_timer_set_duty(unsigned int timer, uint16_t duty)
-{
-	writew(duty, jz4740_timer_base + JZ_REG_TIMER_DHR(timer));
-}
-
-static inline void jz4740_timer_set_count(unsigned int timer, uint16_t count)
-{
-	writew(count, jz4740_timer_base + JZ_REG_TIMER_CNT(timer));
-}
-
-static inline uint16_t jz4740_timer_get_count(unsigned int timer)
-{
-	return readw(jz4740_timer_base + JZ_REG_TIMER_CNT(timer));
-}
-
-static inline void jz4740_timer_ack_full(unsigned int timer)
-{
-	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR);
-}
-
-static inline void jz4740_timer_irq_full_enable(unsigned int timer)
-{
-	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR);
-	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_CLEAR);
-}
-
-static inline void jz4740_timer_irq_full_disable(unsigned int timer)
-{
-	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_SET);
-}
-
-static inline void jz4740_timer_set_ctrl(unsigned int timer, uint16_t ctrl)
-{
-	writew(ctrl, jz4740_timer_base + JZ_REG_TIMER_CTRL(timer));
-}
-
-static inline uint16_t jz4740_timer_get_ctrl(unsigned int timer)
-{
-	return readw(jz4740_timer_base + JZ_REG_TIMER_CTRL(timer));
-}
-
-#endif
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 1e638e7..35ee2bf 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -21,9 +21,6 @@ config UNICORE32
 	  designs licensed by PKUnity Ltd.
 	  Please see web page at <http://www.pkunity.com/>.
 
-config HAVE_PWM
-	bool
-
 config GENERIC_GPIO
 	def_bool y
 
@@ -106,7 +103,8 @@ config PUV3_DB0913
 
 config PUV3_NB0916
 	bool "NetBook board (0916)"
-	select HAVE_PWM
+	select PWM
+	select PWM_PUV3
 
 config PUV3_SMW0919
 	bool "Security Mini-Workstation board (0919)"
@@ -220,12 +218,6 @@ config PUV3_GPIO
 	select GPIO_SYSFS if EXPERIMENTAL
 	default y
 
-config PUV3_PWM
-	tristate
-	default BACKLIGHT_PWM
-	help
-	  Enable support for NB0916 PWM controllers
-
 if PUV3_NB0916
 
 menu "PKUnity NetBook-0916 Features"
diff --git a/arch/unicore32/include/mach/regs-ost.h b/arch/unicore32/include/mach/regs-ost.h
index 7b91fe6..4a85fb4 100644
--- a/arch/unicore32/include/mach/regs-ost.h
+++ b/arch/unicore32/include/mach/regs-ost.h
@@ -33,18 +33,16 @@
  * Interrupt Enable Reg OST_OIER
  */
 #define OST_OIER	(PKUNITY_OST_BASE + 0x001C)
+
 /*
- * PWM Pulse Width Control Reg OST_PWMPWCR
- */
-#define OST_PWMPWCR	(PKUNITY_OST_BASE + 0x0080)
-/*
- * PWM Duty Cycle Control Reg OST_PWMDCCR
- */
-#define OST_PWMDCCR	(PKUNITY_OST_BASE + 0x0084)
-/*
- * PWM Period Control Reg OST_PWMPCR
+ * PWM Registers: IO base address: PKUNITY_OST_BASE + 0x80
+ *      PWCR: Pulse Width Control Reg
+ *      DCCR: Duty Cycle Control Reg
+ *      PCR: Period Control Reg
  */
-#define OST_PWMPCR	(PKUNITY_OST_BASE + 0x0088)
+#define OST_PWM_PWCR	(0x00)
+#define OST_PWM_DCCR	(0x04)
+#define OST_PWM_PCR 	(0x08)
 
 /*
  * Match detected 0 OST_OSSR_M0
diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile
index 3240101..fa497e0 100644
--- a/arch/unicore32/kernel/Makefile
+++ b/arch/unicore32/kernel/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_UNICORE_FPU_F64)	+= fpu-ucf64.o
 obj-$(CONFIG_ARCH_PUV3)		+= clock.o irq.o time.o
 
 obj-$(CONFIG_PUV3_GPIO)		+= gpio.o
-obj-$(CONFIG_PUV3_PWM)		+= pwm.o
 obj-$(CONFIG_PUV3_PM)		+= pm.o sleep.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate.o hibernate_asm.o
 
diff --git a/arch/unicore32/kernel/pwm.c b/arch/unicore32/kernel/pwm.c
deleted file mode 100644
index 4615d51..0000000
--- a/arch/unicore32/kernel/pwm.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * linux/arch/unicore32/kernel/pwm.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <asm/div64.h>
-#include <mach/hardware.h>
-
-struct pwm_device {
-	struct list_head	node;
-	struct platform_device *pdev;
-
-	const char	*label;
-	struct clk	*clk;
-	int		clk_enabled;
-
-	unsigned int	use_count;
-	unsigned int	pwm_id;
-};
-
-/*
- * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
- * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
- */
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long long c;
-	unsigned long period_cycles, prescale, pv, dc;
-
-	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
-		return -EINVAL;
-
-	c = clk_get_rate(pwm->clk);
-	c = c * period_ns;
-	do_div(c, 1000000000);
-	period_cycles = c;
-
-	if (period_cycles < 1)
-		period_cycles = 1;
-	prescale = (period_cycles - 1) / 1024;
-	pv = period_cycles / (prescale + 1) - 1;
-
-	if (prescale > 63)
-		return -EINVAL;
-
-	if (duty_ns == period_ns)
-		dc = OST_PWMDCCR_FDCYCLE;
-	else
-		dc = (pv + 1) * duty_ns / period_ns;
-
-	/* NOTE: the clock to PWM has to be enabled first
-	 * before writing to the registers
-	 */
-	clk_enable(pwm->clk);
-	OST_PWMPWCR = prescale;
-	OST_PWMDCCR = pv - dc;
-	OST_PWMPCR  = pv;
-	clk_disable(pwm->clk);
-
-	return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	int rc = 0;
-
-	if (!pwm->clk_enabled) {
-		rc = clk_enable(pwm->clk);
-		if (!rc)
-			pwm->clk_enabled = 1;
-	}
-	return rc;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	if (pwm->clk_enabled) {
-		clk_disable(pwm->clk);
-		pwm->clk_enabled = 0;
-	}
-}
-EXPORT_SYMBOL(pwm_disable);
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, node) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count++;
-			pwm->label = label;
-		} else
-			pwm = ERR_PTR(-EBUSY);
-	} else
-		pwm = ERR_PTR(-ENOENT);
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else
-		pr_warning("PWM device already freed\n");
-
-	mutex_unlock(&pwm_lock);
-}
-EXPORT_SYMBOL(pwm_free);
-
-static inline void __add_pwm(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->node, &pwm_list);
-	mutex_unlock(&pwm_lock);
-}
-
-static struct pwm_device *pwm_probe(struct platform_device *pdev,
-		unsigned int pwm_id, struct pwm_device *parent_pwm)
-{
-	struct pwm_device *pwm;
-	struct resource *r;
-	int ret = 0;
-
-	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-	if (pwm == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return ERR_PTR(-ENOMEM);
-	}
-
-	pwm->clk = clk_get(NULL, "OST_CLK");
-	if (IS_ERR(pwm->clk)) {
-		ret = PTR_ERR(pwm->clk);
-		goto err_free;
-	}
-	pwm->clk_enabled = 0;
-
-	pwm->use_count = 0;
-	pwm->pwm_id = pwm_id;
-	pwm->pdev = pdev;
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto err_free_clk;
-	}
-
-	r = request_mem_region(r->start, resource_size(r), pdev->name);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "failed to request memory resource\n");
-		ret = -EBUSY;
-		goto err_free_clk;
-	}
-
-	__add_pwm(pwm);
-	platform_set_drvdata(pdev, pwm);
-	return pwm;
-
-err_free_clk:
-	clk_put(pwm->clk);
-err_free:
-	kfree(pwm);
-	return ERR_PTR(ret);
-}
-
-static int __devinit puv3_pwm_probe(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
-
-	if (IS_ERR(pwm))
-		return PTR_ERR(pwm);
-
-	return 0;
-}
-
-static int __devexit pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwm;
-	struct resource *r;
-
-	pwm = platform_get_drvdata(pdev);
-	if (pwm == NULL)
-		return -ENODEV;
-
-	mutex_lock(&pwm_lock);
-	list_del(&pwm->node);
-	mutex_unlock(&pwm_lock);
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, resource_size(r));
-
-	clk_put(pwm->clk);
-	kfree(pwm);
-	return 0;
-}
-
-static struct platform_driver puv3_pwm_driver = {
-	.driver		= {
-		.name	= "PKUnity-v3-PWM",
-	},
-	.probe		= puv3_pwm_probe,
-	.remove		= __devexit_p(pwm_remove),
-};
-
-static int __init pwm_init(void)
-{
-	int ret = 0;
-
-	ret = platform_driver_register(&puv3_pwm_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register puv3_pwm_driver\n");
-		return ret;
-	}
-
-	return ret;
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
-	platform_driver_unregister(&puv3_pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 99c7335..b151b7c 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -60,16 +60,6 @@ config ATMEL_PWM
 	  purposes including software controlled power-efficient backlights
 	  on LCD displays, motor control, and waveform generation.
 
-config AB8500_PWM
-	bool "AB8500 PWM support"
-	depends on AB8500_CORE && ARCH_U8500
-	select HAVE_PWM
-	depends on !PWM
-	help
-	  This driver exports functions to enable/disble/config/free Pulse
-	  Width Modulation in the Analog Baseband Chip AB8500.
-	  It is used by led and backlight driver to control the intensity.
-
 config ATMEL_TCLIB
 	bool "Atmel AT32/AT91 Timer/Counter Library"
 	depends on (AVR32 || ARCH_AT91)
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index b88df7a..2129377 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -44,7 +44,6 @@ obj-$(CONFIG_VMWARE_BALLOON)	+= vmw_balloon.o
 obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
 obj-$(CONFIG_PCH_PHUB)		+= pch_phub.o
 obj-y				+= ti-st/
-obj-$(CONFIG_AB8500_PWM)	+= ab8500-pwm.o
 obj-y				+= lis3lv02d/
 obj-y				+= carma/
 obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index d7c6b83..ed81720 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -1,6 +1,5 @@
 menuconfig PWM
 	bool "Pulse-Width Modulation (PWM) Support"
-	depends on !MACH_JZ4740 && !PUV3_PWM
 	help
 	  Generic Pulse-Width Modulation (PWM) support.
 
@@ -29,6 +28,15 @@ menuconfig PWM
 
 if PWM
 
+config PWM_AB8500
+	tristate "AB8500 PWM support"
+	depends on AB8500_CORE && ARCH_U8500
+	help
+	  Generic PWM framework driver for Analog Baseband AB8500.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-ab8500.
+
 config PWM_BFIN
 	tristate "Blackfin PWM support"
 	depends on BFIN_GPTIMERS
@@ -47,6 +55,16 @@ config PWM_IMX
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-imx.
 
+config PWM_JZ4740
+	tristate "Ingenic JZ4740 PWM support"
+	depends on MACH_JZ4740
+	help
+	  Generic PWM framework driver for Ingenic JZ4740 based
+	  machines.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-jz4740.
+
 config PWM_LPC32XX
 	tristate "LPC32XX PWM support"
 	depends on ARCH_LPC32XX
@@ -67,6 +85,15 @@ config PWM_MXS
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-mxs.
 
+config PWM_PUV3
+	tristate "PKUnity NetBook-0916 PWM support"
+	depends on ARCH_PUV3
+	help
+	  Generic PWM framework driver for PKUnity NetBook-0916.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-puv3.
+
 config PWM_PXA
 	tristate "PXA PWM support"
 	depends on ARCH_PXA
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 78f123d..acfe482 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -1,8 +1,11 @@
 obj-$(CONFIG_PWM)		+= core.o
+obj-$(CONFIG_PWM_AB8500)	+= pwm-ab8500.o
 obj-$(CONFIG_PWM_BFIN)		+= pwm-bfin.o
 obj-$(CONFIG_PWM_IMX)		+= pwm-imx.o
+obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
 obj-$(CONFIG_PWM_LPC32XX)	+= pwm-lpc32xx.o
 obj-$(CONFIG_PWM_MXS)		+= pwm-mxs.o
+obj-$(CONFIG_PWM_PUV3)		+= pwm-puv3.o
 obj-$(CONFIG_PWM_PXA)		+= pwm-pxa.o
 obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
 obj-$(CONFIG_PWM_TEGRA)		+= pwm-tegra.o
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index c6e0507..f5acdaa 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -371,7 +371,7 @@ EXPORT_SYMBOL_GPL(pwm_free);
  */
 int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 {
-	if (!pwm || period_ns == 0 || duty_ns > period_ns)
+	if (!pwm || duty_ns < 0 || period_ns <= 0 || duty_ns > period_ns)
 		return -EINVAL;
 
 	return pwm->chip->ops->config(pwm->chip, pwm, duty_ns, period_ns);
@@ -379,6 +379,28 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 EXPORT_SYMBOL_GPL(pwm_config);
 
 /**
+ * pwm_set_polarity() - configure the polarity of a PWM signal
+ * @pwm: PWM device
+ * @polarity: new polarity of the PWM signal
+ *
+ * Note that the polarity cannot be configured while the PWM device is enabled
+ */
+int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity)
+{
+	if (!pwm || !pwm->chip->ops)
+		return -EINVAL;
+
+	if (!pwm->chip->ops->set_polarity)
+		return -ENOSYS;
+
+	if (test_bit(PWMF_ENABLED, &pwm->flags))
+		return -EBUSY;
+
+	return pwm->chip->ops->set_polarity(pwm->chip, pwm, polarity);
+}
+EXPORT_SYMBOL_GPL(pwm_set_polarity);
+
+/**
  * pwm_enable() - start a PWM output toggling
  * @pwm: PWM device
  */
@@ -624,6 +646,64 @@ out:
 }
 EXPORT_SYMBOL_GPL(pwm_put);
 
+static void devm_pwm_release(struct device *dev, void *res)
+{
+	pwm_put(*(struct pwm_device **)res);
+}
+
+/**
+ * devm_pwm_get() - resource managed pwm_get()
+ * @dev: device for PWM consumer
+ * @con_id: consumer name
+ *
+ * This function performs like pwm_get() but the acquired PWM device will
+ * automatically be released on driver detach.
+ */
+struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id)
+{
+	struct pwm_device **ptr, *pwm;
+
+	ptr = devres_alloc(devm_pwm_release, sizeof(**ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	pwm = pwm_get(dev, con_id);
+	if (!IS_ERR(pwm)) {
+		*ptr = pwm;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(devm_pwm_get);
+
+static int devm_pwm_match(struct device *dev, void *res, void *data)
+{
+	struct pwm_device **p = res;
+
+	if (WARN_ON(!p || !*p))
+		return 0;
+
+	return *p == data;
+}
+
+/**
+ * devm_pwm_put() - resource managed pwm_put()
+ * @dev: device for PWM consumer
+ * @pwm: PWM device
+ *
+ * Release a PWM previously allocated using devm_pwm_get(). Calling this
+ * function is usually not needed because devm-allocated resources are
+ * automatically released on driver detach.
+ */
+void devm_pwm_put(struct device *dev, struct pwm_device *pwm)
+{
+	WARN_ON(devres_release(dev, devm_pwm_release, devm_pwm_match, pwm));
+}
+EXPORT_SYMBOL_GPL(devm_pwm_put);
+
 #ifdef CONFIG_DEBUG_FS
 static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
 {
diff --git a/drivers/misc/ab8500-pwm.c b/drivers/pwm/pwm-ab8500.c
index d7a9aa1..cfb72ca 100644
--- a/drivers/misc/ab8500-pwm.c
+++ b/drivers/pwm/pwm-ab8500.c
@@ -24,16 +24,12 @@
 #define ENABLE_PWM			1
 #define DISABLE_PWM			0
 
-struct pwm_device {
-	struct device *dev;
-	struct list_head node;
-	const char *label;
-	unsigned int pwm_id;
+struct ab8500_pwm_chip {
+	struct pwm_chip chip;
 };
 
-static LIST_HEAD(pwm_list);
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+static int ab8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			     int duty_ns, int period_ns)
 {
 	int ret = 0;
 	unsigned int higher_val, lower_val;
@@ -50,95 +46,94 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 	 */
 	higher_val = ((duty_ns & 0x0300) >> 8);
 
-	reg = AB8500_PWM_OUT_CTRL1_REG + ((pwm->pwm_id - 1) * 2);
+	reg = AB8500_PWM_OUT_CTRL1_REG + ((chip->base - 1) * 2);
 
-	ret = abx500_set_register_interruptible(pwm->dev, AB8500_MISC,
+	ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
 			reg, (u8)lower_val);
 	if (ret < 0)
 		return ret;
-	ret = abx500_set_register_interruptible(pwm->dev, AB8500_MISC,
+	ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
 			(reg + 1), (u8)higher_val);
 
 	return ret;
 }
-EXPORT_SYMBOL(pwm_config);
 
-int pwm_enable(struct pwm_device *pwm)
+static int ab8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	int ret;
 
-	ret = abx500_mask_and_set_register_interruptible(pwm->dev,
+	ret = abx500_mask_and_set_register_interruptible(chip->dev,
 				AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
-				1 << (pwm->pwm_id-1), ENABLE_PWM);
+				1 << (chip->base - 1), ENABLE_PWM);
 	if (ret < 0)
-		dev_err(pwm->dev, "%s: Failed to disable PWM, Error %d\n",
+		dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
 							pwm->label, ret);
 	return ret;
 }
-EXPORT_SYMBOL(pwm_enable);
 
-void pwm_disable(struct pwm_device *pwm)
+static void ab8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	int ret;
 
-	ret = abx500_mask_and_set_register_interruptible(pwm->dev,
+	ret = abx500_mask_and_set_register_interruptible(chip->dev,
 				AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
-				1 << (pwm->pwm_id-1), DISABLE_PWM);
+				1 << (chip->base - 1), DISABLE_PWM);
 	if (ret < 0)
-		dev_err(pwm->dev, "%s: Failed to disable PWM, Error %d\n",
+		dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
 							pwm->label, ret);
 	return;
 }
-EXPORT_SYMBOL(pwm_disable);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-
-	list_for_each_entry(pwm, &pwm_list, node) {
-		if (pwm->pwm_id == pwm_id) {
-			pwm->label = label;
-			pwm->pwm_id = pwm_id;
-			return pwm;
-		}
-	}
-
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(pwm_request);
 
-void pwm_free(struct pwm_device *pwm)
-{
-	pwm_disable(pwm);
-}
-EXPORT_SYMBOL(pwm_free);
+static const struct pwm_ops ab8500_pwm_ops = {
+	.config = ab8500_pwm_config,
+	.enable = ab8500_pwm_enable,
+	.disable = ab8500_pwm_disable,
+};
 
 static int __devinit ab8500_pwm_probe(struct platform_device *pdev)
 {
-	struct pwm_device *pwm;
+	struct ab8500_pwm_chip *ab8500;
+	int err;
+
 	/*
 	 * Nothing to be done in probe, this is required to get the
 	 * device which is required for ab8500 read and write
 	 */
-	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-	if (pwm == NULL) {
+	ab8500 = kzalloc(sizeof(*ab8500), GFP_KERNEL);
+	if (ab8500 == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
 		return -ENOMEM;
 	}
-	pwm->dev = &pdev->dev;
-	pwm->pwm_id = pdev->id;
-	list_add_tail(&pwm->node, &pwm_list);
-	platform_set_drvdata(pdev, pwm);
-	dev_dbg(pwm->dev, "pwm probe successful\n");
+
+	ab8500->chip.dev = &pdev->dev;
+	ab8500->chip.ops = &ab8500_pwm_ops;
+	ab8500->chip.base = pdev->id;
+	ab8500->chip.npwm = 1;
+
+	err = pwmchip_add(&ab8500->chip);
+	if (err < 0) {
+		kfree(ab8500);
+		return err;
+	}
+
+	dev_dbg(&pdev->dev, "pwm probe successful\n");
+	platform_set_drvdata(pdev, ab8500);
+
 	return 0;
 }
 
 static int __devexit ab8500_pwm_remove(struct platform_device *pdev)
 {
-	struct pwm_device *pwm = platform_get_drvdata(pdev);
-	list_del(&pwm->node);
+	struct ab8500_pwm_chip *ab8500 = platform_get_drvdata(pdev);
+	int err;
+
+	err = pwmchip_remove(&ab8500->chip);
+	if (err < 0)
+		return err;
+
 	dev_dbg(&pdev->dev, "pwm driver removed\n");
-	kfree(pwm);
+	kfree(ab8500);
+
 	return 0;
 }
 
@@ -150,19 +145,8 @@ static struct platform_driver ab8500_pwm_driver = {
 	.probe = ab8500_pwm_probe,
 	.remove = __devexit_p(ab8500_pwm_remove),
 };
+module_platform_driver(ab8500_pwm_driver);
 
-static int __init ab8500_pwm_init(void)
-{
-	return platform_driver_register(&ab8500_pwm_driver);
-}
-
-static void __exit ab8500_pwm_exit(void)
-{
-	platform_driver_unregister(&ab8500_pwm_driver);
-}
-
-subsys_initcall(ab8500_pwm_init);
-module_exit(ab8500_pwm_exit);
 MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>");
 MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver");
 MODULE_ALIAS("platform:ab8500-pwm");
diff --git a/drivers/pwm/pwm-bfin.c b/drivers/pwm/pwm-bfin.c
index d53c4e7..5da8e18 100644
--- a/drivers/pwm/pwm-bfin.c
+++ b/drivers/pwm/pwm-bfin.c
@@ -69,9 +69,6 @@ static int bfin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	unsigned long period, duty;
 	unsigned long long val;
 
-	if (duty_ns < 0 || duty_ns > period_ns)
-		return -EINVAL;
-
 	val = (unsigned long long)get_sclk() * period_ns;
 	do_div(val, NSEC_PER_SEC);
 	period = val;
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index 2a0b353..8a5d3ae 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -16,8 +16,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/pwm.h>
-#include <mach/hardware.h>
-
+#include <linux/of_device.h>
 
 /* i.MX1 and i.MX21 share the same PWM function block: */
 
@@ -25,6 +24,7 @@
 #define MX1_PWMS    0x04   /* PWM Sample Register */
 #define MX1_PWMP    0x08   /* PWM Period Register */
 
+#define MX1_PWMC_EN		(1 << 4)
 
 /* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
 
@@ -40,110 +40,165 @@
 #define MX3_PWMCR_EN              (1 << 0)
 
 struct imx_chip {
-	struct clk	*clk;
+	struct clk	*clk_per;
+	struct clk	*clk_ipg;
 
-	int		clk_enabled;
+	int		enabled;
 	void __iomem	*mmio_base;
 
 	struct pwm_chip	chip;
+
+	int (*config)(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns);
+	void (*set_enable)(struct pwm_chip *chip, bool enable);
 };
 
 #define to_imx_chip(chip)	container_of(chip, struct imx_chip, chip)
 
-static int imx_pwm_config(struct pwm_chip *chip,
+static int imx_pwm_config_v1(struct pwm_chip *chip,
 		struct pwm_device *pwm, int duty_ns, int period_ns)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
 
-	if (!(cpu_is_mx1() || cpu_is_mx21())) {
-		unsigned long long c;
-		unsigned long period_cycles, duty_cycles, prescale;
-		u32 cr;
-
-		c = clk_get_rate(imx->clk);
-		c = c * period_ns;
-		do_div(c, 1000000000);
-		period_cycles = c;
-
-		prescale = period_cycles / 0x10000 + 1;
-
-		period_cycles /= prescale;
-		c = (unsigned long long)period_cycles * duty_ns;
-		do_div(c, period_ns);
-		duty_cycles = c;
-
-		/*
-		 * according to imx pwm RM, the real period value should be
-		 * PERIOD value in PWMPR plus 2.
-		 */
-		if (period_cycles > 2)
-			period_cycles -= 2;
-		else
-			period_cycles = 0;
-
-		writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
-		writel(period_cycles, imx->mmio_base + MX3_PWMPR);
-
-		cr = MX3_PWMCR_PRESCALER(prescale) |
-			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
-			MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
-
-		if (cpu_is_mx25())
-			cr |= MX3_PWMCR_CLKSRC_IPG;
-		else
-			cr |= MX3_PWMCR_CLKSRC_IPG_HIGH;
-
-		writel(cr, imx->mmio_base + MX3_PWMCR);
-	} else if (cpu_is_mx1() || cpu_is_mx21()) {
-		/* The PWM subsystem allows for exact frequencies. However,
-		 * I cannot connect a scope on my device to the PWM line and
-		 * thus cannot provide the program the PWM controller
-		 * exactly. Instead, I'm relying on the fact that the
-		 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
-		 * function group already. So I'll just modify the PWM sample
-		 * register to follow the ratio of duty_ns vs. period_ns
-		 * accordingly.
-		 *
-		 * This is good enough for programming the brightness of
-		 * the LCD backlight.
-		 *
-		 * The real implementation would divide PERCLK[0] first by
-		 * both the prescaler (/1 .. /128) and then by CLKSEL
-		 * (/2 .. /16).
-		 */
-		u32 max = readl(imx->mmio_base + MX1_PWMP);
-		u32 p = max * duty_ns / period_ns;
-		writel(max - p, imx->mmio_base + MX1_PWMS);
-	} else {
-		BUG();
-	}
+	/*
+	 * The PWM subsystem allows for exact frequencies. However,
+	 * I cannot connect a scope on my device to the PWM line and
+	 * thus cannot provide the program the PWM controller
+	 * exactly. Instead, I'm relying on the fact that the
+	 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+	 * function group already. So I'll just modify the PWM sample
+	 * register to follow the ratio of duty_ns vs. period_ns
+	 * accordingly.
+	 *
+	 * This is good enough for programming the brightness of
+	 * the LCD backlight.
+	 *
+	 * The real implementation would divide PERCLK[0] first by
+	 * both the prescaler (/1 .. /128) and then by CLKSEL
+	 * (/2 .. /16).
+	 */
+	u32 max = readl(imx->mmio_base + MX1_PWMP);
+	u32 p = max * duty_ns / period_ns;
+	writel(max - p, imx->mmio_base + MX1_PWMS);
 
 	return 0;
 }
 
+static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	u32 val;
+
+	val = readl(imx->mmio_base + MX1_PWMC);
+
+	if (enable)
+		val |= MX1_PWMC_EN;
+	else
+		val &= ~MX1_PWMC_EN;
+
+	writel(val, imx->mmio_base + MX1_PWMC);
+}
+
+static int imx_pwm_config_v2(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	unsigned long long c;
+	unsigned long period_cycles, duty_cycles, prescale;
+	u32 cr;
+
+	c = clk_get_rate(imx->clk_per);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	prescale = period_cycles / 0x10000 + 1;
+
+	period_cycles /= prescale;
+	c = (unsigned long long)period_cycles * duty_ns;
+	do_div(c, period_ns);
+	duty_cycles = c;
+
+	/*
+	 * according to imx pwm RM, the real period value should be
+	 * PERIOD value in PWMPR plus 2.
+	 */
+	if (period_cycles > 2)
+		period_cycles -= 2;
+	else
+		period_cycles = 0;
+
+	writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
+	writel(period_cycles, imx->mmio_base + MX3_PWMPR);
+
+	cr = MX3_PWMCR_PRESCALER(prescale) |
+		MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+		MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH;
+
+	if (imx->enabled)
+		cr |= MX3_PWMCR_EN;
+
+	writel(cr, imx->mmio_base + MX3_PWMCR);
+
+	return 0;
+}
+
+static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	u32 val;
+
+	val = readl(imx->mmio_base + MX3_PWMCR);
+
+	if (enable)
+		val |= MX3_PWMCR_EN;
+	else
+		val &= ~MX3_PWMCR_EN;
+
+	writel(val, imx->mmio_base + MX3_PWMCR);
+}
+
+static int imx_pwm_config(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	int ret;
+
+	ret = clk_prepare_enable(imx->clk_ipg);
+	if (ret)
+		return ret;
+
+	ret = imx->config(chip, pwm, duty_ns, period_ns);
+
+	clk_disable_unprepare(imx->clk_ipg);
+
+	return ret;
+}
+
 static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
-	int rc = 0;
+	int ret;
 
-	if (!imx->clk_enabled) {
-		rc = clk_prepare_enable(imx->clk);
-		if (!rc)
-			imx->clk_enabled = 1;
-	}
-	return rc;
+	ret = clk_prepare_enable(imx->clk_per);
+	if (ret)
+		return ret;
+
+	imx->set_enable(chip, true);
+
+	imx->enabled = 1;
+
+	return 0;
 }
 
 static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
 
-	writel(0, imx->mmio_base + MX3_PWMCR);
+	imx->set_enable(chip, false);
 
-	if (imx->clk_enabled) {
-		clk_disable_unprepare(imx->clk);
-		imx->clk_enabled = 0;
-	}
+	clk_disable_unprepare(imx->clk_per);
+	imx->enabled = 0;
 }
 
 static struct pwm_ops imx_pwm_ops = {
@@ -153,30 +208,66 @@ static struct pwm_ops imx_pwm_ops = {
 	.owner = THIS_MODULE,
 };
 
+struct imx_pwm_data {
+	int (*config)(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns);
+	void (*set_enable)(struct pwm_chip *chip, bool enable);
+};
+
+static struct imx_pwm_data imx_pwm_data_v1 = {
+	.config = imx_pwm_config_v1,
+	.set_enable = imx_pwm_set_enable_v1,
+};
+
+static struct imx_pwm_data imx_pwm_data_v2 = {
+	.config = imx_pwm_config_v2,
+	.set_enable = imx_pwm_set_enable_v2,
+};
+
+static const struct of_device_id imx_pwm_dt_ids[] = {
+	{ .compatible = "fsl,imx1-pwm", .data = &imx_pwm_data_v1, },
+	{ .compatible = "fsl,imx27-pwm", .data = &imx_pwm_data_v2, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_pwm_dt_ids);
+
 static int __devinit imx_pwm_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *of_id =
+			of_match_device(imx_pwm_dt_ids, &pdev->dev);
+	struct imx_pwm_data *data;
 	struct imx_chip *imx;
 	struct resource *r;
 	int ret = 0;
 
+	if (!of_id)
+		return -ENODEV;
+
 	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
 	if (imx == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
 		return -ENOMEM;
 	}
 
-	imx->clk = devm_clk_get(&pdev->dev, "pwm");
+	imx->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(imx->clk_per)) {
+		dev_err(&pdev->dev, "getting per clock failed with %ld\n",
+				PTR_ERR(imx->clk_per));
+		return PTR_ERR(imx->clk_per);
+	}
 
-	if (IS_ERR(imx->clk))
-		return PTR_ERR(imx->clk);
+	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(imx->clk_ipg)) {
+		dev_err(&pdev->dev, "getting ipg clock failed with %ld\n",
+				PTR_ERR(imx->clk_ipg));
+		return PTR_ERR(imx->clk_ipg);
+	}
 
 	imx->chip.ops = &imx_pwm_ops;
 	imx->chip.dev = &pdev->dev;
 	imx->chip.base = -1;
 	imx->chip.npwm = 1;
 
-	imx->clk_enabled = 0;
-
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
@@ -187,6 +278,10 @@ static int __devinit imx_pwm_probe(struct platform_device *pdev)
 	if (imx->mmio_base == NULL)
 		return -EADDRNOTAVAIL;
 
+	data = of_id->data;
+	imx->config = data->config;
+	imx->set_enable = data->set_enable;
+
 	ret = pwmchip_add(&imx->chip);
 	if (ret < 0)
 		return ret;
@@ -208,23 +303,14 @@ static int __devexit imx_pwm_remove(struct platform_device *pdev)
 
 static struct platform_driver imx_pwm_driver = {
 	.driver		= {
-		.name	= "mxc_pwm",
+		.name	= "imx-pwm",
+		.of_match_table = of_match_ptr(imx_pwm_dt_ids),
 	},
 	.probe		= imx_pwm_probe,
 	.remove		= __devexit_p(imx_pwm_remove),
 };
 
-static int __init imx_pwm_init(void)
-{
-	return platform_driver_register(&imx_pwm_driver);
-}
-arch_initcall(imx_pwm_init);
-
-static void __exit imx_pwm_exit(void)
-{
-	platform_driver_unregister(&imx_pwm_driver);
-}
-module_exit(imx_pwm_exit);
+module_platform_driver(imx_pwm_driver);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
new file mode 100644
index 0000000..10250fc
--- /dev/null
+++ b/drivers/pwm/pwm-jz4740.c
@@ -0,0 +1,221 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform PWM support
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#include <asm/mach-jz4740/gpio.h>
+#include <asm/mach-jz4740/timer.h>
+
+#define NUM_PWM 8
+
+static const unsigned int jz4740_pwm_gpio_list[NUM_PWM] = {
+	JZ_GPIO_PWM0,
+	JZ_GPIO_PWM1,
+	JZ_GPIO_PWM2,
+	JZ_GPIO_PWM3,
+	JZ_GPIO_PWM4,
+	JZ_GPIO_PWM5,
+	JZ_GPIO_PWM6,
+	JZ_GPIO_PWM7,
+};
+
+struct jz4740_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+};
+
+static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
+{
+	return container_of(chip, struct jz4740_pwm_chip, chip);
+}
+
+static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	unsigned int gpio = jz4740_pwm_gpio_list[pwm->hwpwm];
+	int ret;
+
+	/*
+	 * Timers 0 and 1 are used for system tasks, so they are unavailable
+	 * for use as PWMs.
+	 */
+	if (pwm->hwpwm < 2)
+		return -EBUSY;
+
+	ret = gpio_request(gpio, pwm->label);
+	if (ret) {
+		dev_err(chip->dev, "Failed to request GPIO#%u for PWM: %d\n",
+			gpio, ret);
+		return ret;
+	}
+
+	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_PWM);
+
+	jz4740_timer_start(pwm->hwpwm);
+
+	return 0;
+}
+
+static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	unsigned int gpio = jz4740_pwm_gpio_list[pwm->hwpwm];
+
+	jz4740_timer_set_ctrl(pwm->hwpwm, 0);
+
+	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE);
+	gpio_free(gpio);
+
+	jz4740_timer_stop(pwm->hwpwm);
+}
+
+static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	uint32_t ctrl = jz4740_timer_get_ctrl(pwm->pwm);
+
+	ctrl |= JZ_TIMER_CTRL_PWM_ENABLE;
+	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+	jz4740_timer_enable(pwm->hwpwm);
+
+	return 0;
+}
+
+static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	uint32_t ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
+
+	ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE;
+	jz4740_timer_disable(pwm->hwpwm);
+	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+}
+
+static int jz4740_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			     int duty_ns, int period_ns)
+{
+	struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
+	unsigned long long tmp;
+	unsigned long period, duty;
+	unsigned int prescaler = 0;
+	uint16_t ctrl;
+	bool is_enabled;
+
+	tmp = (unsigned long long)clk_get_rate(jz4740->clk) * period_ns;
+	do_div(tmp, 1000000000);
+	period = tmp;
+
+	while (period > 0xffff && prescaler < 6) {
+		period >>= 2;
+		++prescaler;
+	}
+
+	if (prescaler == 6)
+		return -EINVAL;
+
+	tmp = (unsigned long long)period * duty_ns;
+	do_div(tmp, period_ns);
+	duty = period - tmp;
+
+	if (duty >= period)
+		duty = period - 1;
+
+	is_enabled = jz4740_timer_is_enabled(pwm->hwpwm);
+	if (is_enabled)
+		jz4740_pwm_disable(chip, pwm);
+
+	jz4740_timer_set_count(pwm->hwpwm, 0);
+	jz4740_timer_set_duty(pwm->hwpwm, duty);
+	jz4740_timer_set_period(pwm->hwpwm, period);
+
+	ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT |
+		JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
+
+	jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+
+	if (is_enabled)
+		jz4740_pwm_enable(chip, pwm);
+
+	return 0;
+}
+
+static const struct pwm_ops jz4740_pwm_ops = {
+	.request = jz4740_pwm_request,
+	.free = jz4740_pwm_free,
+	.config = jz4740_pwm_config,
+	.enable = jz4740_pwm_enable,
+	.disable = jz4740_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int __devinit jz4740_pwm_probe(struct platform_device *pdev)
+{
+	struct jz4740_pwm_chip *jz4740;
+	int ret;
+
+	jz4740 = devm_kzalloc(&pdev->dev, sizeof(*jz4740), GFP_KERNEL);
+	if (!jz4740)
+		return -ENOMEM;
+
+	jz4740->clk = clk_get(NULL, "ext");
+	if (IS_ERR(jz4740->clk))
+		return PTR_ERR(jz4740->clk);
+
+	jz4740->chip.dev = &pdev->dev;
+	jz4740->chip.ops = &jz4740_pwm_ops;
+	jz4740->chip.npwm = NUM_PWM;
+	jz4740->chip.base = -1;
+
+	ret = pwmchip_add(&jz4740->chip);
+	if (ret < 0) {
+		clk_put(jz4740->clk);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, jz4740);
+
+	return 0;
+}
+
+static int __devexit jz4740_pwm_remove(struct platform_device *pdev)
+{
+	struct jz4740_pwm_chip *jz4740 = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pwmchip_remove(&jz4740->chip);
+	if (ret < 0)
+		return ret;
+
+	clk_put(jz4740->clk);
+
+	return 0;
+}
+
+static struct platform_driver jz4740_pwm_driver = {
+	.driver = {
+		.name = "jz4740-pwm",
+		.owner = THIS_MODULE,
+	},
+	.probe = jz4740_pwm_probe,
+	.remove = __devexit_p(jz4740_pwm_remove),
+};
+module_platform_driver(jz4740_pwm_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Ingenic JZ4740 PWM driver");
+MODULE_ALIAS("platform:jz4740-pwm");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-puv3.c b/drivers/pwm/pwm-puv3.c
new file mode 100644
index 0000000..2a93f37
--- /dev/null
+++ b/drivers/pwm/pwm-puv3.c
@@ -0,0 +1,161 @@
+/*
+ * linux/arch/unicore32/kernel/pwm.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+#include <mach/hardware.h>
+
+struct puv3_pwm_chip {
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct clk *clk;
+	bool enabled;
+};
+
+static inline struct puv3_pwm_chip *to_puv3(struct pwm_chip *chip)
+{
+	return container_of(chip, struct puv3_pwm_chip, chip);
+}
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+static int puv3_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			   int duty_ns, int period_ns)
+{
+	unsigned long period_cycles, prescale, pv, dc;
+	struct puv3_pwm_chip *puv3 = to_puv3(chip);
+	unsigned long long c;
+
+	c = clk_get_rate(puv3->clk);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	if (period_cycles < 1)
+		period_cycles = 1;
+
+	prescale = (period_cycles - 1) / 1024;
+	pv = period_cycles / (prescale + 1) - 1;
+
+	if (prescale > 63)
+		return -EINVAL;
+
+	if (duty_ns == period_ns)
+		dc = OST_PWMDCCR_FDCYCLE;
+	else
+		dc = (pv + 1) * duty_ns / period_ns;
+
+	/*
+	 * NOTE: the clock to PWM has to be enabled first
+	 * before writing to the registers
+	 */
+	clk_prepare_enable(puv3->clk);
+
+	writel(prescale, puv3->base + OST_PWM_PWCR);
+	writel(pv - dc, puv3->base + OST_PWM_DCCR);
+	writel(pv, puv3->base + OST_PWM_PCR);
+
+	clk_disable_unprepare(puv3->clk);
+
+	return 0;
+}
+
+static int puv3_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct puv3_pwm_chip *puv3 = to_puv3(chip);
+
+	return clk_prepare_enable(puv3->clk);
+}
+
+static void puv3_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct puv3_pwm_chip *puv3 = to_puv3(chip);
+
+	clk_disable_unprepare(puv3->clk);
+}
+
+static const struct pwm_ops puv3_pwm_ops = {
+	.config = puv3_pwm_config,
+	.enable = puv3_pwm_enable,
+	.disable = puv3_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int __devinit pwm_probe(struct platform_device *pdev)
+{
+	struct puv3_pwm_chip *puv3;
+	struct resource *r;
+	int ret;
+
+	puv3 = devm_kzalloc(&pdev->dev, sizeof(*puv3), GFP_KERNEL);
+	if (puv3 == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	puv3->clk = devm_clk_get(&pdev->dev, "OST_CLK");
+	if (IS_ERR(puv3->clk))
+		return PTR_ERR(puv3->clk);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		return -ENODEV;
+	}
+
+	puv3->base = devm_request_and_ioremap(&pdev->dev, r);
+	if (puv3->base == NULL)
+		return -EADDRNOTAVAIL;
+
+	puv3->chip.dev = &pdev->dev;
+	puv3->chip.ops = &puv3_pwm_ops;
+	puv3->chip.base = -1;
+	puv3->chip.npwm = 1;
+
+	ret = pwmchip_add(&puv3->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, puv3);
+	return 0;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+	struct puv3_pwm_chip *puv3 = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&puv3->chip);
+}
+
+static struct platform_driver puv3_pwm_driver = {
+	.driver = {
+		.name = "PKUnity-v3-PWM",
+	},
+	.probe = pwm_probe,
+	.remove = __devexit_p(pwm_remove),
+};
+module_platform_driver(puv3_pwm_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
index bd5867a..260c3a8 100644
--- a/drivers/pwm/pwm-pxa.c
+++ b/drivers/pwm/pwm-pxa.c
@@ -70,9 +70,6 @@ static int pxa_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	unsigned long offset;
 	int rc;
 
-	if (period_ns == 0 || duty_ns > period_ns)
-		return -EINVAL;
-
 	offset = pwm->hwpwm ? 0x10 : 0;
 
 	c = clk_get_rate(pc->clk);
diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c
index e5187c0..023a3be 100644
--- a/drivers/pwm/pwm-samsung.c
+++ b/drivers/pwm/pwm-samsung.c
@@ -126,9 +126,6 @@ static int s3c_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
 		return -ERANGE;
 
-	if (duty_ns > period_ns)
-		return -EINVAL;
-
 	if (period_ns == s3c->period_ns &&
 	    duty_ns == s3c->duty_ns)
 		return 0;
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index 4b66889..d6d4cf0 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -32,6 +32,7 @@
 #define CAP3			0x10
 #define CAP4			0x14
 #define ECCTL2			0x2A
+#define ECCTL2_APWM_POL_LOW	BIT(10)
 #define ECCTL2_APWM_MODE	BIT(9)
 #define ECCTL2_SYNC_SEL_DISA	(BIT(7) | BIT(6))
 #define ECCTL2_TSCTR_FREERUN	BIT(4)
@@ -59,7 +60,7 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	unsigned long period_cycles, duty_cycles;
 	unsigned int reg_val;
 
-	if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC)
+	if (period_ns > NSEC_PER_SEC)
 		return -ERANGE;
 
 	c = pc->clk_rate;
@@ -111,6 +112,26 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
+static int ecap_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+		enum pwm_polarity polarity)
+{
+	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
+	unsigned short reg_val;
+
+	pm_runtime_get_sync(pc->chip.dev);
+	reg_val = readw(pc->mmio_base + ECCTL2);
+	if (polarity == PWM_POLARITY_INVERSED)
+		/* Duty cycle defines LOW period of PWM */
+		reg_val |= ECCTL2_APWM_POL_LOW;
+	else
+		/* Duty cycle defines HIGH period of PWM */
+		reg_val &= ~ECCTL2_APWM_POL_LOW;
+
+	writew(reg_val, pc->mmio_base + ECCTL2);
+	pm_runtime_put_sync(pc->chip.dev);
+	return 0;
+}
+
 static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
@@ -157,6 +178,7 @@ static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 static const struct pwm_ops ecap_pwm_ops = {
 	.free		= ecap_pwm_free,
 	.config		= ecap_pwm_config,
+	.set_polarity	= ecap_pwm_set_polarity,
 	.enable		= ecap_pwm_enable,
 	.disable	= ecap_pwm_disable,
 	.owner		= THIS_MODULE,
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index b1996bc..d3c1dff 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -81,6 +81,15 @@
 #define AQCTL_ZRO_FRCHIGH	BIT(1)
 #define AQCTL_ZRO_FRCTOGGLE	(BIT(1) | BIT(0))
 
+#define AQCTL_CHANA_POLNORMAL	(AQCTL_CAU_FRCLOW | AQCTL_PRD_FRCHIGH | \
+				AQCTL_ZRO_FRCHIGH)
+#define AQCTL_CHANA_POLINVERSED	(AQCTL_CAU_FRCHIGH | AQCTL_PRD_FRCLOW | \
+				AQCTL_ZRO_FRCLOW)
+#define AQCTL_CHANB_POLNORMAL	(AQCTL_CBU_FRCLOW | AQCTL_PRD_FRCHIGH | \
+				AQCTL_ZRO_FRCHIGH)
+#define AQCTL_CHANB_POLINVERSED	(AQCTL_CBU_FRCHIGH | AQCTL_PRD_FRCLOW | \
+				AQCTL_ZRO_FRCLOW)
+
 #define AQSFRC_RLDCSF_MASK	(BIT(7) | BIT(6))
 #define AQSFRC_RLDCSF_ZRO	0
 #define AQSFRC_RLDCSF_PRD	BIT(6)
@@ -105,6 +114,7 @@ struct ehrpwm_pwm_chip {
 	unsigned int	clk_rate;
 	void __iomem	*mmio_base;
 	unsigned long period_cycles[NUM_PWM_CHANNEL];
+	enum pwm_polarity polarity[NUM_PWM_CHANNEL];
 };
 
 static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
@@ -165,39 +175,37 @@ static int set_prescale_div(unsigned long rqst_prescaler,
 	return 1;
 }
 
-static void configure_chans(struct ehrpwm_pwm_chip *pc, int chan,
-		unsigned long duty_cycles)
+static void configure_polarity(struct ehrpwm_pwm_chip *pc, int chan)
 {
-	int cmp_reg, aqctl_reg;
+	int aqctl_reg;
 	unsigned short aqctl_val, aqctl_mask;
 
 	/*
-	 * Channels can be configured from action qualifier module.
-	 * Channel 0 configured with compare A register and for
-	 * up-counter mode.
-	 * Channel 1 configured with compare B register and for
-	 * up-counter mode.
+	 * Configure PWM output to HIGH/LOW level on counter
+	 * reaches compare register value and LOW/HIGH level
+	 * on counter value reaches period register value and
+	 * zero value on counter
 	 */
 	if (chan == 1) {
 		aqctl_reg = AQCTLB;
-		cmp_reg = CMPB;
-		/* Configure PWM Low from compare B value */
-		aqctl_val = AQCTL_CBU_FRCLOW;
 		aqctl_mask = AQCTL_CBU_MASK;
+
+		if (pc->polarity[chan] == PWM_POLARITY_INVERSED)
+			aqctl_val = AQCTL_CHANB_POLINVERSED;
+		else
+			aqctl_val = AQCTL_CHANB_POLNORMAL;
 	} else {
-		cmp_reg = CMPA;
 		aqctl_reg = AQCTLA;
-		/* Configure PWM Low from compare A value*/
-		aqctl_val = AQCTL_CAU_FRCLOW;
 		aqctl_mask = AQCTL_CAU_MASK;
+
+		if (pc->polarity[chan] == PWM_POLARITY_INVERSED)
+			aqctl_val = AQCTL_CHANA_POLINVERSED;
+		else
+			aqctl_val = AQCTL_CHANA_POLNORMAL;
 	}
 
-	/* Configure PWM High from period value and zero value */
-	aqctl_val |= AQCTL_PRD_FRCHIGH | AQCTL_ZRO_FRCHIGH;
 	aqctl_mask |= AQCTL_PRD_MASK | AQCTL_ZRO_MASK;
-	ehrpwm_modify(pc->mmio_base,  aqctl_reg, aqctl_mask, aqctl_val);
-
-	ehrpwm_write(pc->mmio_base,  cmp_reg, duty_cycles);
+	ehrpwm_modify(pc->mmio_base, aqctl_reg, aqctl_mask, aqctl_val);
 }
 
 /*
@@ -211,9 +219,9 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	unsigned long long c;
 	unsigned long period_cycles, duty_cycles;
 	unsigned short ps_divval, tb_divval;
-	int i;
+	int i, cmp_reg;
 
-	if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC)
+	if (period_ns > NSEC_PER_SEC)
 		return -ERANGE;
 
 	c = pc->clk_rate;
@@ -278,12 +286,29 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CTRMODE_MASK,
 			TBCTL_CTRMODE_UP);
 
-	/* Configure the channel for duty cycle */
-	configure_chans(pc, pwm->hwpwm, duty_cycles);
+	if (pwm->hwpwm == 1)
+		/* Channel 1 configured with compare B register */
+		cmp_reg = CMPB;
+	else
+		/* Channel 0 configured with compare A register */
+		cmp_reg = CMPA;
+
+	ehrpwm_write(pc->mmio_base, cmp_reg, duty_cycles);
+
 	pm_runtime_put_sync(chip->dev);
 	return 0;
 }
 
+static int ehrpwm_pwm_set_polarity(struct pwm_chip *chip,
+		struct pwm_device *pwm,	enum pwm_polarity polarity)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+
+	/* Configuration of polarity in hardware delayed, do at enable */
+	pc->polarity[pwm->hwpwm] = polarity;
+	return 0;
+}
+
 static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
@@ -307,6 +332,9 @@ static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 
 	ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
 
+	/* Channels polarity can be configured from action qualifier module */
+	configure_polarity(pc, pwm->hwpwm);
+
 	/* Enable time counter for free_run */
 	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN);
 	return 0;
@@ -358,6 +386,7 @@ static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 static const struct pwm_ops ehrpwm_pwm_ops = {
 	.free		= ehrpwm_pwm_free,
 	.config		= ehrpwm_pwm_config,
+	.set_polarity	= ehrpwm_pwm_set_polarity,
 	.enable		= ehrpwm_pwm_enable,
 	.disable	= ehrpwm_pwm_disable,
 	.owner		= THIS_MODULE,
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 995f016..069983c 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -213,7 +213,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	pb->exit = data->exit;
 	pb->dev = &pdev->dev;
 
-	pb->pwm = pwm_get(&pdev->dev, NULL);
+	pb->pwm = devm_pwm_get(&pdev->dev, NULL);
 	if (IS_ERR(pb->pwm)) {
 		dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n");
 
@@ -246,7 +246,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
 		ret = PTR_ERR(bl);
-		goto err_bl;
+		goto err_alloc;
 	}
 
 	bl->props.brightness = data->dft_brightness;
@@ -255,8 +255,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, bl);
 	return 0;
 
-err_bl:
-	pwm_put(pb->pwm);
 err_alloc:
 	if (data->exit)
 		data->exit(&pdev->dev);
@@ -271,7 +269,6 @@ static int pwm_backlight_remove(struct platform_device *pdev)
 	backlight_device_unregister(bl);
 	pwm_config(pb->pwm, 0, pb->period);
 	pwm_disable(pb->pwm);
-	pwm_put(pb->pwm);
 	if (pb->exit)
 		pb->exit(&pdev->dev);
 	return 0;
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index 21d076c..112b314 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -1,11 +1,13 @@
 #ifndef __LINUX_PWM_H
 #define __LINUX_PWM_H
 
+#include <linux/err.h>
 #include <linux/of.h>
 
 struct pwm_device;
 struct seq_file;
 
+#if IS_ENABLED(CONFIG_PWM) || IS_ENABLED(CONFIG_HAVE_PWM)
 /*
  * pwm_request - request a PWM device
  */
@@ -30,10 +32,47 @@ int pwm_enable(struct pwm_device *pwm);
  * pwm_disable - stop a PWM output toggling
  */
 void pwm_disable(struct pwm_device *pwm);
+#else
+static inline struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void pwm_free(struct pwm_device *pwm)
+{
+}
+
+static inline int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	return -EINVAL;
+}
+
+static inline int pwm_enable(struct pwm_device *pwm)
+{
+	return -EINVAL;
+}
+
+static inline void pwm_disable(struct pwm_device *pwm)
+{
+}
+#endif
 
-#ifdef CONFIG_PWM
 struct pwm_chip;
 
+/**
+ * enum pwm_polarity - polarity of a PWM signal
+ * @PWM_POLARITY_NORMAL: a high signal for the duration of the duty-
+ * cycle, followed by a low signal for the remainder of the pulse
+ * period
+ * @PWM_POLARITY_INVERSED: a low signal for the duration of the duty-
+ * cycle, followed by a high signal for the remainder of the pulse
+ * period
+ */
+enum pwm_polarity {
+	PWM_POLARITY_NORMAL,
+	PWM_POLARITY_INVERSED,
+};
+
 enum {
 	PWMF_REQUESTED = 1 << 0,
 	PWMF_ENABLED = 1 << 1,
@@ -61,11 +100,17 @@ static inline unsigned int pwm_get_period(struct pwm_device *pwm)
 	return pwm ? pwm->period : 0;
 }
 
+/*
+ * pwm_set_polarity - configure the polarity of a PWM signal
+ */
+int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity);
+
 /**
  * struct pwm_ops - PWM controller operations
  * @request: optional hook for requesting a PWM
  * @free: optional hook for freeing a PWM
  * @config: configure duty cycles and period length for this PWM
+ * @set_polarity: configure the polarity of this PWM
  * @enable: enable PWM output toggling
  * @disable: disable PWM output toggling
  * @dbg_show: optional routine to show contents in debugfs
@@ -79,6 +124,9 @@ struct pwm_ops {
 	int			(*config)(struct pwm_chip *chip,
 					  struct pwm_device *pwm,
 					  int duty_ns, int period_ns);
+	int			(*set_polarity)(struct pwm_chip *chip,
+					  struct pwm_device *pwm,
+					  enum pwm_polarity polarity);
 	int			(*enable)(struct pwm_chip *chip,
 					  struct pwm_device *pwm);
 	void			(*disable)(struct pwm_chip *chip,
@@ -113,6 +161,7 @@ struct pwm_chip {
 	unsigned int		of_pwm_n_cells;
 };
 
+#if IS_ENABLED(CONFIG_PWM)
 int pwm_set_chip_data(struct pwm_device *pwm, void *data);
 void *pwm_get_chip_data(struct pwm_device *pwm);
 
@@ -125,6 +174,57 @@ struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
 struct pwm_device *pwm_get(struct device *dev, const char *consumer);
 void pwm_put(struct pwm_device *pwm);
 
+struct pwm_device *devm_pwm_get(struct device *dev, const char *consumer);
+void devm_pwm_put(struct device *dev, struct pwm_device *pwm);
+#else
+static inline int pwm_set_chip_data(struct pwm_device *pwm, void *data)
+{
+	return -EINVAL;
+}
+
+static inline void *pwm_get_chip_data(struct pwm_device *pwm)
+{
+	return NULL;
+}
+
+static inline int pwmchip_add(struct pwm_chip *chip)
+{
+	return -EINVAL;
+}
+
+static inline int pwmchip_remove(struct pwm_chip *chip)
+{
+	return -EINVAL;
+}
+
+static inline struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
+						       unsigned int index,
+						       const char *label)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct pwm_device *pwm_get(struct device *dev,
+					 const char *consumer)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void pwm_put(struct pwm_device *pwm)
+{
+}
+
+static inline struct pwm_device *devm_pwm_get(struct device *dev,
+					      const char *consumer)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void devm_pwm_put(struct device *dev, struct pwm_device *pwm)
+{
+}
+#endif
+
 struct pwm_lookup {
 	struct list_head list;
 	const char *provider;
@@ -141,8 +241,12 @@ struct pwm_lookup {
 		.con_id = _con_id,			\
 	}
 
+#if IS_ENABLED(CONFIG_PWM)
 void pwm_add_table(struct pwm_lookup *table, size_t num);
-
+#else
+static inline void pwm_add_table(struct pwm_lookup *table, size_t num)
+{
+}
 #endif
 
 #endif /* __LINUX_PWM_H */