diff options
author | Andrew Lunn <andrew@lunn.ch> | 2013-02-05 21:52:51 (GMT) |
---|---|---|
committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2013-02-09 11:56:08 (GMT) |
commit | 2a4bd9f0db24ba14c8b38777d77add2682233c79 (patch) | |
tree | df5c84538f118e63ff93e13456702086e58708bb | |
parent | 93f0822dff5dae2f0a2645f16300c14af41ca777 (diff) | |
download | linux-fsl-qoriq-2a4bd9f0db24ba14c8b38777d77add2682233c79.tar.xz |
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs
The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The
CPU can either use the a high speed cpu clock, or the slower DDR
clock. Add a driver to swap between these two clock sources.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-rw-r--r-- | Documentation/devicetree/bindings/arm/kirkwood.txt | 27 | ||||
-rw-r--r-- | drivers/clk/mvebu/clk-gating-ctrl.c | 1 | ||||
-rw-r--r-- | drivers/cpufreq/Kconfig.arm | 6 | ||||
-rw-r--r-- | drivers/cpufreq/Makefile | 1 | ||||
-rw-r--r-- | drivers/cpufreq/kirkwood-cpufreq.c | 259 |
5 files changed, 294 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/kirkwood.txt b/Documentation/devicetree/bindings/arm/kirkwood.txt new file mode 100644 index 0000000..98cce9a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/kirkwood.txt @@ -0,0 +1,27 @@ +Marvell Kirkwood Platforms Device Tree Bindings +----------------------------------------------- + +Boards with a SoC of the Marvell Kirkwood +shall have the following property: + +Required root node property: + +compatible: must contain "marvell,kirkwood"; + +In order to support the kirkwood cpufreq driver, there must be a node +cpus/cpu@0 with three clocks, "cpu_clk", "ddrclk" and "powersave", +where the "powersave" clock is a gating clock used to switch the CPU +between the "cpu_clk" and the "ddrclk". + +Example: + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "marvell,sheeva-88SV131"; + clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>; + clock-names = "cpu_clk", "ddrclk", "powersave"; + }; diff --git a/drivers/clk/mvebu/clk-gating-ctrl.c b/drivers/clk/mvebu/clk-gating-ctrl.c index 8fa5408..ebf141d 100644 --- a/drivers/clk/mvebu/clk-gating-ctrl.c +++ b/drivers/clk/mvebu/clk-gating-ctrl.c @@ -193,6 +193,7 @@ static const struct mvebu_soc_descr __initconst kirkwood_gating_descr[] = { { "runit", NULL, 7 }, { "xor0", NULL, 8 }, { "audio", NULL, 9 }, + { "powersave", "cpuclk", 11 }, { "sata0", NULL, 14 }, { "sata1", NULL, 15 }, { "xor1", NULL, 16 }, diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index c65226c..7f333af 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -77,6 +77,12 @@ config ARM_EXYNOS5250_CPUFREQ This adds the CPUFreq driver for Samsung EXYNOS5250 SoC. +config ARM_KIRKWOOD_CPUFREQ + def_bool ARCH_KIRKWOOD && OF + help + This adds the CPUFreq driver for Marvell Kirkwood + SoCs. + config ARM_IMX6Q_CPUFREQ tristate "Freescale i.MX6Q cpufreq support" depends on SOC_IMX6Q diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index cd3d4ff..5399c45 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o +obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c new file mode 100644 index 0000000..0e83e3c --- /dev/null +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -0,0 +1,259 @@ +/* + * kirkwood_freq.c: cpufreq driver for the Marvell kirkwood + * + * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/cpufreq.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <asm/proc-fns.h> + +#define CPU_SW_INT_BLK BIT(28) + +static struct priv +{ + struct clk *cpu_clk; + struct clk *ddr_clk; + struct clk *powersave_clk; + struct device *dev; + void __iomem *base; +} priv; + +#define STATE_CPU_FREQ 0x01 +#define STATE_DDR_FREQ 0x02 + +/* + * Kirkwood can swap the clock to the CPU between two clocks: + * + * - cpu clk + * - ddr clk + * + * The frequencies are set at runtime before registering this * + * table. + */ +static struct cpufreq_frequency_table kirkwood_freq_table[] = { + {STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */ + {STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */ + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu) +{ + if (__clk_is_enabled(priv.powersave_clk)) + return kirkwood_freq_table[1].frequency; + return kirkwood_freq_table[0].frequency; +} + +static void kirkwood_cpufreq_set_cpu_state(unsigned int index) +{ + struct cpufreq_freqs freqs; + unsigned int state = kirkwood_freq_table[index].index; + unsigned long reg; + + freqs.old = kirkwood_cpufreq_get_cpu_frequency(0); + freqs.new = kirkwood_freq_table[index].frequency; + freqs.cpu = 0; /* Kirkwood is UP */ + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + dev_dbg(priv.dev, "Attempting to set frequency to %i KHz\n", + kirkwood_freq_table[index].frequency); + dev_dbg(priv.dev, "old frequency was %i KHz\n", + kirkwood_cpufreq_get_cpu_frequency(0)); + + if (freqs.old != freqs.new) { + local_irq_disable(); + + /* Disable interrupts to the CPU */ + reg = readl_relaxed(priv.base); + reg |= CPU_SW_INT_BLK; + writel_relaxed(reg, priv.base); + + switch (state) { + case STATE_CPU_FREQ: + clk_disable(priv.powersave_clk); + break; + case STATE_DDR_FREQ: + clk_enable(priv.powersave_clk); + break; + } + + /* Wait-for-Interrupt, while the hardware changes frequency */ + cpu_do_idle(); + + /* Enable interrupts to the CPU */ + reg = readl_relaxed(priv.base); + reg &= ~CPU_SW_INT_BLK; + writel_relaxed(reg, priv.base); + + local_irq_enable(); + } + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); +}; + +static int kirkwood_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, kirkwood_freq_table); +} + +static int kirkwood_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int index = 0; + + if (cpufreq_frequency_table_target(policy, kirkwood_freq_table, + target_freq, relation, &index)) + return -EINVAL; + + kirkwood_cpufreq_set_cpu_state(index); + + return 0; +} + +/* Module init and exit code */ +static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + int result; + + /* cpuinfo and default policy values */ + policy->cpuinfo.transition_latency = 5000; /* 5uS */ + policy->cur = kirkwood_cpufreq_get_cpu_frequency(0); + + result = cpufreq_frequency_table_cpuinfo(policy, kirkwood_freq_table); + if (result) + return result; + + cpufreq_frequency_table_get_attr(kirkwood_freq_table, policy->cpu); + + return 0; +} + +static int kirkwood_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static struct freq_attr *kirkwood_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver kirkwood_cpufreq_driver = { + .get = kirkwood_cpufreq_get_cpu_frequency, + .verify = kirkwood_cpufreq_verify, + .target = kirkwood_cpufreq_target, + .init = kirkwood_cpufreq_cpu_init, + .exit = kirkwood_cpufreq_cpu_exit, + .name = "kirkwood-cpufreq", + .owner = THIS_MODULE, + .attr = kirkwood_cpufreq_attr, +}; + +static int kirkwood_cpufreq_probe(struct platform_device *pdev) +{ + struct device_node *np; + struct resource *res; + int err; + + priv.dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Cannot get memory resource\n"); + return -ENODEV; + } + priv.base = devm_request_and_ioremap(&pdev->dev, res); + if (!priv.base) { + dev_err(&pdev->dev, "Cannot ioremap\n"); + return -EADDRNOTAVAIL; + } + + np = of_find_node_by_path("/cpus/cpu@0"); + if (!np) + return -ENODEV; + + priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk"); + if (IS_ERR(priv.cpu_clk)) { + dev_err(priv.dev, "Unable to get cpuclk"); + return PTR_ERR(priv.cpu_clk); + } + + clk_prepare_enable(priv.cpu_clk); + kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000; + + priv.ddr_clk = of_clk_get_by_name(np, "ddrclk"); + if (IS_ERR(priv.ddr_clk)) { + dev_err(priv.dev, "Unable to get ddrclk"); + err = PTR_ERR(priv.ddr_clk); + goto out_cpu; + } + + clk_prepare_enable(priv.ddr_clk); + kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000; + + priv.powersave_clk = of_clk_get_by_name(np, "powersave"); + if (IS_ERR(priv.powersave_clk)) { + dev_err(priv.dev, "Unable to get powersave"); + err = PTR_ERR(priv.powersave_clk); + goto out_ddr; + } + clk_prepare(priv.powersave_clk); + + of_node_put(np); + np = NULL; + + err = cpufreq_register_driver(&kirkwood_cpufreq_driver); + if (!err) + return 0; + + dev_err(priv.dev, "Failed to register cpufreq driver"); + + clk_disable_unprepare(priv.powersave_clk); +out_ddr: + clk_disable_unprepare(priv.ddr_clk); +out_cpu: + clk_disable_unprepare(priv.cpu_clk); + of_node_put(np); + + return err; +} + +static int kirkwood_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&kirkwood_cpufreq_driver); + + clk_disable_unprepare(priv.powersave_clk); + clk_disable_unprepare(priv.ddr_clk); + clk_disable_unprepare(priv.cpu_clk); + + return 0; +} + +static struct platform_driver kirkwood_cpufreq_platform_driver = { + .probe = kirkwood_cpufreq_probe, + .remove = kirkwood_cpufreq_remove, + .driver = { + .name = "kirkwood-cpufreq", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(kirkwood_cpufreq_platform_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch"); +MODULE_DESCRIPTION("cpufreq driver for Marvell's kirkwood CPU"); +MODULE_ALIAS("platform:kirkwood-cpufreq"); |