diff options
author | Alan Cox <alan@lxorguk.ukuu.org.uk> | 2006-01-19 01:44:12 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@g5.osdl.org> | 2006-01-19 03:20:31 (GMT) |
commit | 2f768af73fea4c70f9046388a7ff648ad11f028e (patch) | |
tree | 5b9b95b99a39bb46a1dfca6416f4d8c9d29be6ad | |
parent | 0d88a10e566d46bffc214c974e5cf5abe38d8da8 (diff) | |
download | linux-fsl-qoriq-2f768af73fea4c70f9046388a7ff648ad11f028e.tar.xz |
[PATCH] EDAC: drivers for Radisys 82600
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-rw-r--r-- | drivers/edac/r82600_edac.c | 407 |
1 files changed, 407 insertions, 0 deletions
diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c new file mode 100644 index 0000000..b6399a5 --- /dev/null +++ b/drivers/edac/r82600_edac.c @@ -0,0 +1,407 @@ +/* + * Radisys 82600 Embedded chipset Memory Controller kernel module + * (C) 2005 EADS Astrium + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Tim Small <tim@buttersideup.com>, based on work by Thayne + * Harbaugh, Dan Hollis <goemon at anime dot net> and others. + * + * $Id: edac_r82600.c,v 1.1.2.6 2005/10/05 00:43:44 dsp_llnl Exp $ + * + * Written with reference to 82600 High Integration Dual PCI System + * Controller Data Book: + * http://www.radisys.com/files/support_downloads/007-01277-0002.82600DataBook.pdf + * references to this document given in [] + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/pci.h> +#include <linux/pci_ids.h> + +#include <linux/slab.h> + +#include "edac_mc.h" + +/* Radisys say "The 82600 integrates a main memory SDRAM controller that + * supports up to four banks of memory. The four banks can support a mix of + * sizes of 64 bit wide (72 bits with ECC) Synchronous DRAM (SDRAM) DIMMs, + * each of which can be any size from 16MB to 512MB. Both registered (control + * signals buffered) and unbuffered DIMM types are supported. Mixing of + * registered and unbuffered DIMMs as well as mixing of ECC and non-ECC DIMMs + * is not allowed. The 82600 SDRAM interface operates at the same frequency as + * the CPU bus, 66MHz, 100MHz or 133MHz." + */ + +#define R82600_NR_CSROWS 4 +#define R82600_NR_CHANS 1 +#define R82600_NR_DIMMS 4 + +#define R82600_BRIDGE_ID 0x8200 + +/* Radisys 82600 register addresses - device 0 function 0 - PCI bridge */ +#define R82600_DRAMC 0x57 /* Various SDRAM related control bits + * all bits are R/W + * + * 7 SDRAM ISA Hole Enable + * 6 Flash Page Mode Enable + * 5 ECC Enable: 1=ECC 0=noECC + * 4 DRAM DIMM Type: 1= + * 3 BIOS Alias Disable + * 2 SDRAM BIOS Flash Write Enable + * 1:0 SDRAM Refresh Rate: 00=Disabled + * 01=7.8usec (256Mbit SDRAMs) + * 10=15.6us 11=125usec + */ + +#define R82600_SDRAMC 0x76 /* "SDRAM Control Register" + * More SDRAM related control bits + * all bits are R/W + * + * 15:8 Reserved. + * + * 7:5 Special SDRAM Mode Select + * + * 4 Force ECC + * + * 1=Drive ECC bits to 0 during + * write cycles (i.e. ECC test mode) + * + * 0=Normal ECC functioning + * + * 3 Enhanced Paging Enable + * + * 2 CAS# Latency 0=3clks 1=2clks + * + * 1 RAS# to CAS# Delay 0=3 1=2 + * + * 0 RAS# Precharge 0=3 1=2 + */ + +#define R82600_EAP 0x80 /* ECC Error Address Pointer Register + * + * 31 Disable Hardware Scrubbing (RW) + * 0=Scrub on corrected read + * 1=Don't scrub on corrected read + * + * 30:12 Error Address Pointer (RO) + * Upper 19 bits of error address + * + * 11:4 Syndrome Bits (RO) + * + * 3 BSERR# on multibit error (RW) + * 1=enable 0=disable + * + * 2 NMI on Single Bit Eror (RW) + * 1=NMI triggered by SBE n.b. other + * prerequeists + * 0=NMI not triggered + * + * 1 MBE (R/WC) + * read 1=MBE at EAP (see above) + * read 0=no MBE, or SBE occurred first + * write 1=Clear MBE status (must also + * clear SBE) + * write 0=NOP + * + * 1 SBE (R/WC) + * read 1=SBE at EAP (see above) + * read 0=no SBE, or MBE occurred first + * write 1=Clear SBE status (must also + * clear MBE) + * write 0=NOP + */ + +#define R82600_DRBA 0x60 /* + 0x60..0x63 SDRAM Row Boundry Address + * Registers + * + * 7:0 Address lines 30:24 - upper limit of + * each row [p57] + */ + +struct r82600_error_info { + u32 eapr; +}; + + +static unsigned int disable_hardware_scrub = 0; + + +static void r82600_get_error_info (struct mem_ctl_info *mci, + struct r82600_error_info *info) +{ + pci_read_config_dword(mci->pdev, R82600_EAP, &info->eapr); + + if (info->eapr & BIT(0)) + /* Clear error to allow next error to be reported [p.62] */ + pci_write_bits32(mci->pdev, R82600_EAP, + ((u32) BIT(0) & (u32) BIT(1)), + ((u32) BIT(0) & (u32) BIT(1))); + + if (info->eapr & BIT(1)) + /* Clear error to allow next error to be reported [p.62] */ + pci_write_bits32(mci->pdev, R82600_EAP, + ((u32) BIT(0) & (u32) BIT(1)), + ((u32) BIT(0) & (u32) BIT(1))); +} + + +static int r82600_process_error_info (struct mem_ctl_info *mci, + struct r82600_error_info *info, int handle_errors) +{ + int error_found; + u32 eapaddr, page; + u32 syndrome; + + error_found = 0; + + /* bits 30:12 store the upper 19 bits of the 32 bit error address */ + eapaddr = ((info->eapr >> 12) & 0x7FFF) << 13; + /* Syndrome in bits 11:4 [p.62] */ + syndrome = (info->eapr >> 4) & 0xFF; + + /* the R82600 reports at less than page * + * granularity (upper 19 bits only) */ + page = eapaddr >> PAGE_SHIFT; + + if (info->eapr & BIT(0)) { /* CE? */ + error_found = 1; + + if (handle_errors) + edac_mc_handle_ce( + mci, page, 0, /* not avail */ + syndrome, + edac_mc_find_csrow_by_page(mci, page), + 0, /* channel */ + mci->ctl_name); + } + + if (info->eapr & BIT(1)) { /* UE? */ + error_found = 1; + + if (handle_errors) + /* 82600 doesn't give enough info */ + edac_mc_handle_ue(mci, page, 0, + edac_mc_find_csrow_by_page(mci, page), + mci->ctl_name); + } + + return error_found; +} + +static void r82600_check(struct mem_ctl_info *mci) +{ + struct r82600_error_info info; + + debugf1("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__); + r82600_get_error_info(mci, &info); + r82600_process_error_info(mci, &info, 1); +} + +static int r82600_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc = -ENODEV; + int index; + struct mem_ctl_info *mci = NULL; + u8 dramcr; + u32 ecc_on; + u32 reg_sdram; + u32 eapr; + u32 scrub_disabled; + u32 sdram_refresh_rate; + u32 row_high_limit_last = 0; + u32 eap_init_bits; + + debugf0("MC: " __FILE__ ": %s()\n", __func__); + + + pci_read_config_byte(pdev, R82600_DRAMC, &dramcr); + pci_read_config_dword(pdev, R82600_EAP, &eapr); + + ecc_on = dramcr & BIT(5); + reg_sdram = dramcr & BIT(4); + scrub_disabled = eapr & BIT(31); + sdram_refresh_rate = dramcr & (BIT(0) | BIT(1)); + + debugf2("MC: " __FILE__ ": %s(): sdram refresh rate = %#0x\n", + __func__, sdram_refresh_rate); + + debugf2("MC: " __FILE__ ": %s(): DRAMC register = %#0x\n", __func__, + dramcr); + + mci = edac_mc_alloc(0, R82600_NR_CSROWS, R82600_NR_CHANS); + + if (mci == NULL) { + rc = -ENOMEM; + goto fail; + } + + debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci); + + mci->pdev = pdev; + mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR; + + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; + /* FIXME try to work out if the chip leads have been * + * used for COM2 instead on this board? [MA6?] MAYBE: */ + + /* On the R82600, the pins for memory bits 72:65 - i.e. the * + * EC bits are shared with the pins for COM2 (!), so if COM2 * + * is enabled, we assume COM2 is wired up, and thus no EDAC * + * is possible. */ + mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; + if (ecc_on) { + if (scrub_disabled) + debugf3("MC: " __FILE__ ": %s(): mci = %p - " + "Scrubbing disabled! EAP: %#0x\n", __func__, + mci, eapr); + } else + mci->edac_cap = EDAC_FLAG_NONE; + + mci->mod_name = BS_MOD_STR; + mci->mod_ver = "$Revision: 1.1.2.6 $"; + mci->ctl_name = "R82600"; + mci->edac_check = r82600_check; + mci->ctl_page_to_phys = NULL; + + for (index = 0; index < mci->nr_csrows; index++) { + struct csrow_info *csrow = &mci->csrows[index]; + u8 drbar; /* sDram Row Boundry Address Register */ + u32 row_high_limit; + u32 row_base; + + /* find the DRAM Chip Select Base address and mask */ + pci_read_config_byte(mci->pdev, R82600_DRBA + index, &drbar); + + debugf1("MC%d: " __FILE__ ": %s() Row=%d DRBA = %#0x\n", + mci->mc_idx, __func__, index, drbar); + + row_high_limit = ((u32) drbar << 24); +/* row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */ + + debugf1("MC%d: " __FILE__ ": %s() Row=%d, " + "Boundry Address=%#0x, Last = %#0x \n", + mci->mc_idx, __func__, index, row_high_limit, + row_high_limit_last); + + /* Empty row [p.57] */ + if (row_high_limit == row_high_limit_last) + continue; + + row_base = row_high_limit_last; + + csrow->first_page = row_base >> PAGE_SHIFT; + csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1; + csrow->nr_pages = csrow->last_page - csrow->first_page + 1; + /* Error address is top 19 bits - so granularity is * + * 14 bits */ + csrow->grain = 1 << 14; + csrow->mtype = reg_sdram ? MEM_RDDR : MEM_DDR; + /* FIXME - check that this is unknowable with this chipset */ + csrow->dtype = DEV_UNKNOWN; + + /* Mode is global on 82600 */ + csrow->edac_mode = ecc_on ? EDAC_SECDED : EDAC_NONE; + row_high_limit_last = row_high_limit; + } + + /* clear counters */ + /* FIXME should we? */ + + if (edac_mc_add_mc(mci)) { + debugf3("MC: " __FILE__ + ": %s(): failed edac_mc_add_mc()\n", __func__); + goto fail; + } + + /* get this far and it's successful */ + + /* Clear error flags to allow next error to be reported [p.62] */ + /* Test systems seem to always have the UE flag raised on boot */ + + eap_init_bits = BIT(0) & BIT(1); + if (disable_hardware_scrub) { + eap_init_bits |= BIT(31); + debugf3("MC: " __FILE__ ": %s(): Disabling Hardware Scrub " + "(scrub on error)\n", __func__); + } + + pci_write_bits32(mci->pdev, R82600_EAP, eap_init_bits, + eap_init_bits); + + debugf3("MC: " __FILE__ ": %s(): success\n", __func__); + return 0; + +fail: + if (mci) + edac_mc_free(mci); + + return rc; +} + +/* returns count (>= 0), or negative on error */ +static int __devinit r82600_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + debugf0("MC: " __FILE__ ": %s()\n", __func__); + + /* don't need to call pci_device_enable() */ + return r82600_probe1(pdev, ent->driver_data); +} + + +static void __devexit r82600_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + debugf0(__FILE__ ": %s()\n", __func__); + + if (((mci = edac_mc_find_mci_by_pdev(pdev)) != NULL) && + !edac_mc_del_mc(mci)) + edac_mc_free(mci); +} + + +static const struct pci_device_id r82600_pci_tbl[] __devinitdata = { + {PCI_DEVICE(PCI_VENDOR_ID_RADISYS, R82600_BRIDGE_ID)}, + {0,} /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, r82600_pci_tbl); + + +static struct pci_driver r82600_driver = { + .name = BS_MOD_STR, + .probe = r82600_init_one, + .remove = __devexit_p(r82600_remove_one), + .id_table = r82600_pci_tbl, +}; + + +int __init r82600_init(void) +{ + return pci_register_driver(&r82600_driver); +} + + +static void __exit r82600_exit(void) +{ + pci_unregister_driver(&r82600_driver); +} + + +module_init(r82600_init); +module_exit(r82600_exit); + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tim Small <tim@buttersideup.com> - WPAD Ltd. " + "on behalf of EADS Astrium"); +MODULE_DESCRIPTION("MC support for Radisys 82600 memory controllers"); + +module_param(disable_hardware_scrub, bool, 0644); +MODULE_PARM_DESC(disable_hardware_scrub, + "If set, disable the chipset's automatic scrub for CEs"); |