diff options
author | Linus Walleij <linus.walleij@stericsson.com> | 2009-09-22 13:41:40 (GMT) |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2009-09-22 19:49:05 (GMT) |
commit | 34e84f39a27d059a3e6ec6e8b94aafa702e6f220 (patch) | |
tree | 263bf7ee2a9f6b4ce86f89a82806fb73ff3c41d7 | |
parent | 6ef297f86b62f187c59475784208f75c2ed8ccd8 (diff) | |
download | linux-fsl-qoriq-34e84f39a27d059a3e6ec6e8b94aafa702e6f220.tar.xz |
ARM: 5721/1: MMCI enable the use of a regulator
This enables the use of a regulator to power the MMCI/PL180
PrimeCell. The OCR mask is calculated and voltage is set using
the new MMC core functions for discovering voltage ranges
in regulators. The platform translate_vdd function which basically
controls the 4 lines out of the PL180 is disabled if you use a
regulator instead.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-rw-r--r-- | drivers/mmc/host/mmci.c | 50 | ||||
-rw-r--r-- | drivers/mmc/host/mmci.h | 1 |
2 files changed, 47 insertions, 4 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 79205e5..3d1e532 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -23,6 +23,7 @@ #include <linux/scatterlist.h> #include <linux/gpio.h> #include <linux/amba/mmci.h> +#include <linux/regulator/consumer.h> #include <asm/cacheflush.h> #include <asm/div64.h> @@ -452,13 +453,28 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) u32 pwr = 0; unsigned long flags; - if (host->plat->translate_vdd) - pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd); - switch (ios->power_mode) { case MMC_POWER_OFF: + if(host->vcc && + regulator_is_enabled(host->vcc)) + regulator_disable(host->vcc); break; case MMC_POWER_UP: +#ifdef CONFIG_REGULATOR + if (host->vcc) + /* This implicitly enables the regulator */ + mmc_regulator_set_ocr(host->vcc, ios->vdd); +#endif + /* + * The translate_vdd function is not used if you have + * an external regulator, or your design is really weird. + * Using it would mean sending in power control BOTH using + * a regulator AND the 4 MMCIPWR bits. If we don't have + * a regulator, we might have some other platform specific + * power control behind this translate function. + */ + if (!host->vcc && host->plat->translate_vdd) + pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd); /* The ST version does not have this, fall through to POWER_ON */ if (host->hw_designer != AMBA_VENDOR_ST) { pwr |= MCI_PWR_UP; @@ -603,7 +619,29 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) mmc->ops = &mmci_ops; mmc->f_min = (host->mclk + 511) / 512; mmc->f_max = min(host->mclk, fmax); - mmc->ocr_avail = plat->ocr_mask; +#ifdef CONFIG_REGULATOR + /* If we're using the regulator framework, try to fetch a regulator */ + host->vcc = regulator_get(&dev->dev, "vmmc"); + if (IS_ERR(host->vcc)) + host->vcc = NULL; + else { + int mask = mmc_regulator_get_ocrmask(host->vcc); + + if (mask < 0) + dev_err(&dev->dev, "error getting OCR mask (%d)\n", + mask); + else { + host->mmc->ocr_avail = (u32) mask; + if (plat->ocr_mask) + dev_warn(&dev->dev, + "Provided ocr_mask/setpower will not be used " + "(using regulator instead)\n"); + } + } +#endif + /* Fall back to platform data if no regulator is found */ + if (host->vcc == NULL) + mmc->ocr_avail = plat->ocr_mask; mmc->caps = plat->capabilities; /* @@ -741,6 +779,10 @@ static int __devexit mmci_remove(struct amba_device *dev) clk_disable(host->clk); clk_put(host->clk); + if (regulator_is_enabled(host->vcc)) + regulator_disable(host->vcc); + regulator_put(host->vcc); + mmc_free_host(mmc); amba_release_regions(dev); diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index a7f9a51..1ceb9a9 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -175,6 +175,7 @@ struct mmci_host { struct scatterlist *sg_ptr; unsigned int sg_off; unsigned int size; + struct regulator *vcc; }; static inline void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) |