diff options
author | Patrick Trantham <patrick.trantham@fuel7.com> | 2012-11-15 09:00:57 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2012-11-15 22:48:50 (GMT) |
commit | 4223dbffed9f89596177ff2b256ef3258b20fa46 (patch) | |
tree | 6472e1dbeaca62e74929aa613afe98527b1086e5 | |
parent | f191a1d17f227032c159e5499809f545402b6dc6 (diff) | |
download | linux-fsl-qoriq-4223dbffed9f89596177ff2b256ef3258b20fa46.tar.xz |
net: phy: smsc: Re-enable EDPD mode for LAN87xx
This patch re-enables Energy Detect Power Down (EDPD) mode for the
LAN8710/LAN8720. EDPD mode was disabled in a previous commit,
(b629820d18fa65cc598390e4b9712fd5f83ee693), because it was causing the
PHY to not be able to detect a link when cold started without a cable
connected.
The LAN8710/LAN8720 requires a minimum of 2 link pulses within 64ms of
each other in order to set the ENERGYON bit and exit EDPD mode. If a
link partner does send the pulses within this interval, the PHY will
remained powered down.
This workaround will manually toggle the PHY on/off upon calls to
read_status in order to generate link test pulses if the link is down.
If a link partner is present, it will respond to the pulses, which will
cause the ENERGYON bit to be set and will cause the EDPD mode to be
exited.
Signed-off-by: Patrick Trantham <patrick.trantham@fuel7.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | drivers/net/phy/smsc.c | 69 |
1 files changed, 43 insertions, 26 deletions
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 88e3991..16dceed 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -56,35 +56,52 @@ static int smsc_phy_config_init(struct phy_device *phydev) return smsc_phy_ack_interrupt (phydev); } -static int lan87xx_config_init(struct phy_device *phydev) +static int lan911x_config_init(struct phy_device *phydev) { - /* - * Make sure the EDPWRDOWN bit is NOT set. Setting this bit on - * LAN8710/LAN8720 PHY causes the PHY to misbehave, likely due - * to a bug on the chip. - * - * When the system is powered on with the network cable being - * disconnected all the way until after ifconfig ethX up is - * issued for the LAN port with this PHY, connecting the cable - * afterwards does not cause LINK change detection, while the - * expected behavior is the Link UP being detected. - */ - int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); - if (rc < 0) - return rc; - - rc &= ~MII_LAN83C185_EDPWRDOWN; - - rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, rc); - if (rc < 0) - return rc; - return smsc_phy_ack_interrupt(phydev); } -static int lan911x_config_init(struct phy_device *phydev) +/* + * The LAN8710/LAN8720 requires a minimum of 2 link pulses within 64ms of each + * other in order to set the ENERGYON bit and exit EDPD mode. If a link partner + * does send the pulses within this interval, the PHY will remained powered + * down. + * + * This workaround will manually toggle the PHY on/off upon calls to read_status + * in order to generate link test pulses if the link is down. If a link partner + * is present, it will respond to the pulses, which will cause the ENERGYON bit + * to be set and will cause the EDPD mode to be exited. + */ +static int lan87xx_read_status(struct phy_device *phydev) { - return smsc_phy_ack_interrupt(phydev); + int err = genphy_read_status(phydev); + + if (!phydev->link) { + /* Disable EDPD to wake up PHY */ + int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); + if (rc < 0) + return rc; + + rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, + rc & ~MII_LAN83C185_EDPWRDOWN); + if (rc < 0) + return rc; + + /* Sleep 64 ms to allow ~5 link test pulses to be sent */ + msleep(64); + + /* Re-enable EDPD */ + rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); + if (rc < 0) + return rc; + + rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, + rc | MII_LAN83C185_EDPWRDOWN); + if (rc < 0) + return rc; + } + + return err; } static struct phy_driver smsc_phy_driver[] = { @@ -187,8 +204,8 @@ static struct phy_driver smsc_phy_driver[] = { /* basic functions */ .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .config_init = lan87xx_config_init, + .read_status = lan87xx_read_status, + .config_intr = smsc_phy_config_intr, /* IRQ related */ .ack_interrupt = smsc_phy_ack_interrupt, |