staging: rtl8188eu: Fix typo in rtl8188eu/hal

Correct spelling typo in rtl8188eu/hal

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 files changed, 22 insertions, 22 deletions

diff --git a/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c b/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c
index e913a22..5700dbc 100644
--- a/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c
+++ b/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c
@@ -85,7 +85,7 @@ u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 cut_vers, u8 fab_vers,
 				value &= ~(GET_PWR_CFG_MASK(pwrcfgcmd));
 				value |= (GET_PWR_CFG_VALUE(pwrcfgcmd) & GET_PWR_CFG_MASK(pwrcfgcmd));
 
-				/*  Write the value back to sytem register */
+				/*  Write the value back to system register */
 				rtw_write8(padapter, offset, value);
 				break;
 			case PWR_CMD_POLLING:
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
index 8c858775..0b0c68c 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
@@ -484,7 +484,7 @@ static void ConstructProbeRsp(struct adapter *adapt, u8 *pframe, u32 *pLength, u
 	*pLength = pktlen;
 }
 
-/*  To check if reserved page content is destroyed by beacon beacuse beacon is too large. */
+/*  To check if reserved page content is destroyed by beacon because beacon is too large. */
 /*  2010.06.23. Added by tynli. */
 void CheckFwRsvdPageContent(struct adapter *Adapter)
 {
@@ -496,9 +496,9 @@ void CheckFwRsvdPageContent(struct adapter *Adapter)
 /*			(1)Beacon, (2)Ps-poll, (3)Null data, (4)ProbeRsp. */
 /*	Input: */
 /*	    bDLFinished - false: At the first time we will send all the packets as a large packet to Hw, */
-/*						so we need to set the packet length to total lengh. */
+/*						so we need to set the packet length to total length. */
 /*			      true: At the second time, we should send the first packet (default:beacon) */
-/*						to Hw again and set the lengh in descriptor to the real beacon lengh. */
+/*						to Hw again and set the length in descriptor to the real beacon length. */
 /*  2009.10.15 by tynli. */
 static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
 {
@@ -671,7 +671,7 @@ _func_enter_;
 			DBG_88E("%s: 1 Download RSVD success! DLBcnCount:%u, poll:%u\n", __func__, DLBcnCount, poll);
 		/*  */
 		/*  We just can send the reserved page twice during the time that Tx thread is stopped (e.g. pnpsetpower) */
-		/*  becuase we need to free the Tx BCN Desc which is used by the first reserved page packet. */
+		/*  because we need to free the Tx BCN Desc which is used by the first reserved page packet. */
 		/*  At run time, we cannot get the Tx Desc until it is released in TxHandleInterrupt() so we will return */
 		/*  the beacon TCB in the following code. 2011.11.23. by tynli. */
 		/*  */
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
index 390ab39..51f03c3 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
@@ -1651,7 +1651,7 @@ hal_EfusePgCheckAvailableAddr(
 {
 	u16	efuse_max_available_len = 0;
 
-	/* Change to check TYPE_EFUSE_MAP_LEN , beacuse 8188E raw 256, logic map over 256. */
+	/* Change to check TYPE_EFUSE_MAP_LEN , because 8188E raw 256, logic map over 256. */
 	EFUSE_GetEfuseDefinition(pAdapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (void *)&efuse_max_available_len, false);
 
 	if (Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest) >= efuse_max_available_len)
@@ -2098,7 +2098,7 @@ static u8 Hal_GetChnlGroup88E(u8 chnl, u8 *pGroup)
 	if (chnl <= 14) {
 		bIn24G = true;
 
-		if (chnl < 3)			/*  Chanel 1-2 */
+		if (chnl < 3)			/*  Channel 1-2 */
 			*pGroup = 0;
 		else if (chnl < 6)		/*  Channel 3-5 */
 			*pGroup = 1;
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
index ff468a6..68bb96d 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
@@ -559,7 +559,7 @@ static	int phy_BB8188E_Config_ParaFile(struct adapter *Adapter)
 
 	/*  */
 	/*  1. Read PHY_REG.TXT BB INIT!! */
-	/*  We will seperate as 88C / 92C according to chip version */
+	/*  We will separate as 88C / 92C according to chip version */
 	/*  */
 	if (HAL_STATUS_FAILURE == ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_PHY_REG))
 		rtStatus = _FAIL;
@@ -685,7 +685,7 @@ static	u8 phy_DbmToTxPwrIdx(struct adapter *Adapter, enum wireless_mode Wireless
 
 	/*  */
 	/*  Tested by MP, we found that CCK Index 0 equals to 8dbm, OFDM legacy equals to */
-	/*  3dbm, and OFDM HT equals to 0dbm repectively. */
+	/*  3dbm, and OFDM HT equals to 0dbm respectively. */
 	/*  Note: */
 	/*	The mapping may be different by different NICs. Do not use this formula for what needs accurate result. */
 	/*  By Bruce, 2008-01-29. */
@@ -1006,12 +1006,12 @@ _PHY_SetBWMode92C(
 	switch (pHalData->CurrentChannelBW) {
 	case HT_CHANNEL_WIDTH_20:
 		regBwOpMode |= BW_OPMODE_20MHZ;
-		/*  2007/02/07 Mark by Emily becasue we have not verify whether this register works */
+		/*  2007/02/07 Mark by Emily because we have not verify whether this register works */
 		rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
 		break;
 	case HT_CHANNEL_WIDTH_40:
 		regBwOpMode &= ~BW_OPMODE_20MHZ;
-		/*  2007/02/07 Mark by Emily becasue we have not verify whether this register works */
+		/*  2007/02/07 Mark by Emily because we have not verify whether this register works */
 		rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
 		regRRSR_RSC = (regRRSR_RSC&0x90) | (pHalData->nCur40MhzPrimeSC<<5);
 		rtw_write8(Adapter, REG_RRSR+2, regRRSR_RSC);
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c b/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c
index bfdf9b3..299e03e 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c
@@ -181,7 +181,7 @@ i		 *  Currently, we cannot fully disable driver dynamic
 		 * tx power mechanism because it is referenced by BT
 		 * coexist mechanism.
 		 * In the future, two mechanism shall be separated from
-		 * each other and maintained independantly. */
+		 * each other and maintained independently. */
 		if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) {
 			TxAGC[RF_PATH_A] = 0x10101010;
 			TxAGC[RF_PATH_B] = 0x10101010;
@@ -216,11 +216,11 @@ i		 *  Currently, we cannot fully disable driver dynamic
 	ODM_TxPwrTrackAdjust88E(&pHalData->odmpriv, 1, &direction, &pwrtrac_value);
 
 	if (direction == 1) {
-		/*  Increase TX pwoer */
+		/*  Increase TX power */
 		TxAGC[0] += pwrtrac_value;
 		TxAGC[1] += pwrtrac_value;
 	} else if (direction == 2) {
-		/*  Decrease TX pwoer */
+		/*  Decrease TX power */
 		TxAGC[0] -=  pwrtrac_value;
 		TxAGC[1] -=  pwrtrac_value;
 	}
@@ -292,7 +292,7 @@ static void get_rx_power_val_by_reg(struct adapter *Adapter, u8 Channel,
 			if (pHalData->pwrGroupCnt == 1)
 				chnlGroup = 0;
 			if (pHalData->pwrGroupCnt >= pHalData->PGMaxGroup) {
-				if (Channel < 3)			/*  Chanel 1-2 */
+				if (Channel < 3)			/*  Channel 1-2 */
 					chnlGroup = 0;
 				else if (Channel < 6)		/*  Channel 3-5 */
 					chnlGroup = 1;
@@ -349,7 +349,7 @@ static void get_rx_power_val_by_reg(struct adapter *Adapter, u8 Channel,
 		}
 /*  20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism. */
 /*  Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism. */
-/*  In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder. */
+/*  In the future, two mechanism shall be separated from each other and maintained independently. Thanks for Lanhsin's reminder. */
 		/* 92d do not need this */
 		if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1)
 			writeVal = 0x14141414;
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
index bd8a9ae..8f43f49 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
@@ -332,7 +332,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bag
 
 	/*  2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. */
 	/*  (1) The sequence number of each non-Qos frame / broadcast / multicast / */
-	/*  mgnt frame should be controled by Hw because Fw will also send null data */
+	/*  mgnt frame should be controlled by Hw because Fw will also send null data */
 	/*  which we cannot control when Fw LPS enable. */
 	/*  --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */
 	/*  (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */
diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index 5e656ce..cca9732 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -464,7 +464,7 @@ static void _InitRetryFunction(struct adapter *Adapter)
 /*-----------------------------------------------------------------------------
  * Function:	usb_AggSettingTxUpdate()
  *
- * Overview:	Seperate TX/RX parameters update independent for TP detection and
+ * Overview:	Separate TX/RX parameters update independent for TP detection and
  *			dynamic TX/RX aggreagtion parameters update.
  *
  * Input:			struct adapter *
@@ -473,7 +473,7 @@ static void _InitRetryFunction(struct adapter *Adapter)
  *
  * Revised History:
  *	When		Who		Remark
- *	12/10/2010	MHC		Seperate to smaller function.
+ *	12/10/2010	MHC		Separate to smaller function.
  *
  *---------------------------------------------------------------------------*/
 static void usb_AggSettingTxUpdate(struct adapter *Adapter)
@@ -496,7 +496,7 @@ static void usb_AggSettingTxUpdate(struct adapter *Adapter)
 /*-----------------------------------------------------------------------------
  * Function:	usb_AggSettingRxUpdate()
  *
- * Overview:	Seperate TX/RX parameters update independent for TP detection and
+ * Overview:	Separate TX/RX parameters update independent for TP detection and
  *			dynamic TX/RX aggreagtion parameters update.
  *
  * Input:			struct adapter *
@@ -505,7 +505,7 @@ static void usb_AggSettingTxUpdate(struct adapter *Adapter)
  *
  * Revised History:
  *	When		Who		Remark
- *	12/10/2010	MHC		Seperate to smaller function.
+ *	12/10/2010	MHC		Separate to smaller function.
  *
  *---------------------------------------------------------------------------*/
 static void
@@ -847,7 +847,7 @@ _func_enter_;
 
 	/*  */
 	/*  Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch */
-	/*  Hw bug which Hw initials RxFF boundry size to a value which is larger than the real Rx buffer size in 88E. */
+	/*  Hw bug which Hw initials RxFF boundary size to a value which is larger than the real Rx buffer size in 88E. */
 	/*  */
 	/*  Enable MACTXEN/MACRXEN block */
 	value16 = rtw_read16(Adapter, REG_CR);