diff options
author | Olof Johansson <olof@lixom.net> | 2012-09-22 20:22:21 (GMT) |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2012-09-22 20:22:21 (GMT) |
commit | 80868a36913e11cfcd06764699b4284d34be0e59 (patch) | |
tree | af4c634ccde4c0b4b7bf361e53611ab9903d1a2c | |
parent | b1618547bb68bd32a8b5ed20f97fa577d16b6801 (diff) | |
parent | 0f81bd438bed6af47a01a97d5ecbb23a7e478de6 (diff) | |
download | linux-fsl-qoriq-80868a36913e11cfcd06764699b4284d34be0e59.tar.xz |
Merge branch 'kirkwood/boards' of git://git.infradead.org/users/jcooper/linux into late/kirkwood
* 'kirkwood/boards' of git://git.infradead.org/users/jcooper/linux:
ARM: Dove: allow PCI to be disabled
ARM: dove: SolidRun CuBox DT
ARM: dove: add device tree descriptors
ARM: dove: add device tree based machine descriptor
ARM: dove: add crypto engine
ARM: dove: add clock gating control
ARM: dove: unify clock setup
ARM: initial DTS support for km_kirkwood
arm: add documentation describing Marvell families of SoC
ARM: kirkwood: DT descriptor for Seagate FreeAgent Dockstar
ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar
ARM: Kirkwood: Iomega ix2-200 DT support
Context conflicts in arch/arm/Kconfig and arch/arm/mach-dove/common.c.
The new device trees added to arch/arm/mach-kirkwood/Makefile.boot are
kept and dealt with in a separate changeset, since moving them out to
the new Makefile in this merge commit doesn't work well.
Signed-off-by: Olof Johansson <olof@lixom.net>
23 files changed, 1113 insertions, 33 deletions
diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README new file mode 100644 index 0000000..8f08a86 --- /dev/null +++ b/Documentation/arm/Marvell/README @@ -0,0 +1,232 @@ +ARM Marvell SoCs +================ + +This document lists all the ARM Marvell SoCs that are currently +supported in mainline by the Linux kernel. As the Marvell families of +SoCs are large and complex, it is hard to understand where the support +for a particular SoC is available in the Linux kernel. This document +tries to help in understanding where those SoCs are supported, and to +match them with their corresponding public datasheet, when available. + +Orion family +------------ + + Flavors: + 88F5082 + 88F5181 + 88F5181L + 88F5182 + Datasheet : http://www.embeddedarm.com/documentation/third-party/MV88F5182-datasheet.pdf + Programmer's User Guide : http://www.embeddedarm.com/documentation/third-party/MV88F5182-opensource-manual.pdf + User Manual : http://www.embeddedarm.com/documentation/third-party/MV88F5182-usermanual.pdf + 88F5281 + Datasheet : http://www.ocmodshop.com/images/reviews/networking/qnap_ts409u/marvel_88f5281_data_sheet.pdf + 88F6183 + Core: Feroceon ARMv5 compatible + Linux kernel mach directory: arch/arm/mach-orion5x + Linux kernel plat directory: arch/arm/plat-orion + +Kirkwood family +--------------- + + Flavors: + 88F6282 a.k.a Armada 300 + Product Brief : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf + 88F6283 a.k.a Armada 310 + Product Brief : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf + 88F6190 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6190-003_WEB.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + 88F6192 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6192-003_ver1.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + 88F6182 + 88F6180 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6180-003_ver1.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + 88F6281 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6281-004_ver1.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + Homepage: http://www.marvell.com/embedded-processors/kirkwood/ + Core: Feroceon ARMv5 compatible + Linux kernel mach directory: arch/arm/mach-kirkwood + Linux kernel plat directory: arch/arm/plat-orion + +Discovery family +---------------- + + Flavors: + MV78100 + Product Brief : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78100-003_WEB.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78100_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf + MV78200 + Product Brief : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78200-002_WEB.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78200_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf + MV76100 + Not supported by the Linux kernel. + + Core: Feroceon ARMv5 compatible + + Linux kernel mach directory: arch/arm/mach-mv78xx0 + Linux kernel plat directory: arch/arm/plat-orion + +EBU Armada family +----------------- + + Armada 370 Flavors: + 88F6710 + 88F6707 + 88F6W11 + + Armada XP Flavors: + MV78230 + MV78260 + MV78460 + + Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf + No public datasheet available. + + Core: Sheeva ARMv7 compatible + + Linux kernel mach directory: arch/arm/mach-mvebu + Linux kernel plat directory: none + +Avanta family +------------- + + Flavors: + 88F6510 + 88F6530P + 88F6550 + 88F6560 + Homepage : http://www.marvell.com/broadband/ + Product Brief: http://www.marvell.com/broadband/assets/Marvell_Avanta_88F6510_305_060-001_product_brief.pdf + No public datasheet available. + + Core: ARMv5 compatible + + Linux kernel mach directory: no code in mainline yet, planned for the future + Linux kernel plat directory: no code in mainline yet, planned for the future + +Dove family (application processor) +----------------------------------- + + Flavors: + 88AP510 a.k.a Armada 510 + Product Brief : http://www.marvell.com/application-processors/armada-500/assets/Marvell_Armada510_SoC.pdf + Hardware Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Hardware-Spec.pdf + Functional Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf + Homepage: http://www.marvell.com/application-processors/armada-500/ + Core: ARMv7 compatible + Directory: arch/arm/mach-dove + +PXA 2xx/3xx/93x/95x family +-------------------------- + + Flavors: + PXA21x, PXA25x, PXA26x + Application processor only + Core: ARMv5 XScale core + PXA270, PXA271, PXA272 + Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_pb.pdf + Design guide : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_design_guide.pdf + Developers manual : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_dev_man.pdf + Specification : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_emts.pdf + Specification update : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf + Application processor only + Core: ARMv5 XScale core + PXA300, PXA310, PXA320 + PXA 300 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA300_PB_R4.pdf + PXA 310 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA310_PB_R4.pdf + PXA 320 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA320_PB_R4.pdf + Design guide : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Design_Guide.pdf + Developers manual : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Developers_Manual.zip + Specifications : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_EMTS.pdf + Specification Update : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Spec_Update.zip + Reference Manual : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_TavorP_BootROM_Ref_Manual.pdf + Application processor only + Core: ARMv5 XScale core + PXA930, PXA935 + Application processor with Communication processor + Core: ARMv5 XScale core + PXA955 + Application processor with Communication processor + Core: ARMv7 compatible Sheeva PJ4 core + + Comments: + + * This line of SoCs originates from the XScale family developed by + Intel and acquired by Marvell in ~2006. The PXA21x, PXA25x, + PXA26x, PXA27x, PXA3xx and PXA93x were developed by Intel, while + the later PXA95x were developed by Marvell. + + * Due to their XScale origin, these SoCs have virtually nothing in + common with the other (Kirkwood, Dove, etc.) families of Marvell + SoCs, except with the MMP/MMP2 family of SoCs. + + Linux kernel mach directory: arch/arm/mach-pxa + Linux kernel plat directory: arch/arm/plat-pxa + +MMP/MMP2 family (communication processor) +----------------------------------------- + + Flavors: + PXA168, a.k.a Armada 168 + Homepage : http://www.marvell.com/application-processors/armada-100/armada-168.jsp + Product brief : http://www.marvell.com/application-processors/armada-100/assets/pxa_168_pb.pdf + Hardware manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_datasheet.pdf + Software manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_software_manual.pdf + Specification update : http://www.marvell.com/application-processors/armada-100/assets/ARMADA16x_Spec_update.pdf + Boot ROM manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_ref_manual.pdf + App node package : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_app_note_package.pdf + Application processor only + Core: ARMv5 compatible Marvell PJ1 (Mohawk) + PXA910 + Homepage : http://www.marvell.com/communication-processors/pxa910/ + Product Brief : http://www.marvell.com/communication-processors/pxa910/assets/Marvell_PXA910_Platform-001_PB_final.pdf + Application processor with Communication processor + Core: ARMv5 compatible Marvell PJ1 (Mohawk) + MMP2, a.k.a Armada 610 + Product Brief : http://www.marvell.com/application-processors/armada-600/assets/armada610_pb.pdf + Application processor only + Core: ARMv7 compatible Sheeva PJ4 core + + Comments: + + * This line of SoCs originates from the XScale family developed by + Intel and acquired by Marvell in ~2006. All the processors of + this MMP/MMP2 family were developed by Marvell. + + * Due to their XScale origin, these SoCs have virtually nothing in + common with the other (Kirkwood, Dove, etc.) families of Marvell + SoCs, except with the PXA family of SoCs listed above. + + Linux kernel mach directory: arch/arm/mach-mmp + Linux kernel plat directory: arch/arm/plat-pxa + +Long-term plans +--------------- + + * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ and + mach-kirkwood/ into the mach-mvebu/ to support all SoCs from the + Marvell EBU (Engineering Business Unit) in a single mach-<foo> + directory. The plat-orion/ would therefore disappear. + + * Unify the mach-mmp/ and mach-pxa/ into the same mach-pxa + directory. The plat-pxa/ would therefore disappear. + +Credits +------- + + Maen Suleiman <maen@marvell.com> + Lior Amsalem <alior@marvell.com> + Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + Andrew Lunn <andrew@lunn.ch> + Nicolas Pitre <nico@fluxnic.net> + Eric Miao <eric.y.miao@gmail.com> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f416422..5876aef 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -537,10 +537,11 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" select CPU_V7 - select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_PCI select PLAT_ORION + select USB_ARCH_HAS_EHCI help Support for the Marvell Dove SoC 88AP510 diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts new file mode 100644 index 0000000..61a8062 --- /dev/null +++ b/arch/arm/boot/dts/dove-cm-a510.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "Compulab CM-A510"; + compatible = "compulab,cm-a510", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; +}; + +&uart0 { status = "okay"; }; +&uart1 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sdio1 { status = "okay"; }; +&sata0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts new file mode 100644 index 0000000..0adbd5a --- /dev/null +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -0,0 +1,42 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "SolidRun CuBox"; + compatible = "solidrun,cubox", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpio0 18 1>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&uart0 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sata0 { status = "okay"; }; +&i2c0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts new file mode 100644 index 0000000..e5a920b --- /dev/null +++ b/arch/arm/boot/dts/dove-dove-db.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "Marvell DB-MV88AP510-BP Development Board"; + compatible = "marvell,dove-db", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; +}; + +&uart0 { status = "okay"; }; +&uart1 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sdio1 { status = "okay"; }; +&sata0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash ST-M25P32-VMF6P */ + spi-flash@0 { + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi new file mode 100644 index 0000000..96fb824 --- /dev/null +++ b/arch/arm/boot/dts/dove.dtsi @@ -0,0 +1,143 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "marvell,dove"; + model = "Marvell Armada 88AP510 SoC"; + + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>, + <0xf1020214 0x04>; + }; + + mbus@f1000000 { + compatible = "simple-bus"; + ranges = <0 0xf1000000 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <7>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <8>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <9>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <10>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + wdt: wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + }; + + gpio0: gpio@d0400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0400 0x20>; + ngpio = <32>; + interrupts = <12>, <13>, <14>, <60>; + }; + + gpio1: gpio@d0420 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0420 0x20>; + ngpio = <32>; + interrupts = <61>; + }; + + gpio2: gpio@e8400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xe8400 0x0c>; + ngpio = <8>; + }; + + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <6>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + spi1: spi@14600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <5>; + reg = <0x14600 0x28>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clock-frequency = <400000>; + timeout-ms = <1000>; + status = "disabled"; + }; + + sdio0: sdio@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>, <37>; + status = "disabled"; + }; + + sdio1: sdio@90000 { + compatible = "marvell,dove-sdhci"; + reg = <0x90000 0x100>; + interrupts = <36>, <38>; + status = "disabled"; + }; + + sata0: sata@a0000 { + compatible = "marvell,orion-sata"; + reg = <0xa0000 0x2400>; + interrupts = <62>; + nr-ports = <1>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts new file mode 100644 index 0000000..08a5824 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -0,0 +1,57 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Seagate FreeAgent Dockstar"; + compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "data"; + reg = <0x0500000 0xfb00000>; + }; + }; + }; + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio1 14 1>; + linux,default-trigger = "default-on"; + }; + fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts new file mode 100644 index 0000000..865aeec --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -0,0 +1,105 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Iomega StorCenter ix2-200"; + compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + + lm63: lm63@4c { + compatible = "national,lm63"; + reg = <0x4c>; + }; + }; + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "uInitrd"; + reg = <0x540000 0x1000000>; + }; + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + gpio-leds { + compatible = "gpio-leds"; + + power_led { + label = "status:white:power_led"; + gpios = <&gpio0 16 0>; + linux,default-trigger = "default-on"; + }; + health_led1 { + label = "status:red:health_led"; + gpios = <&gpio1 5 0>; + }; + health_led2 { + label = "status:white:health_led"; + gpios = <&gpio1 4 0>; + }; + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 15 0>; + }; + }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + Power { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio0 14 1>; + }; + Reset { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio0 12 1>; + }; + OTB { + label = "OTB Button"; + linux,code = <133>; + gpios = <&gpio1 3 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts new file mode 100644 index 0000000..75bdb93 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -0,0 +1,29 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Keymile Kirkwood Reference Design"; + compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "ok"; + chip-delay = <25>; + }; + }; +}; diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index dd937c5..00154e7 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -15,6 +15,13 @@ config MACH_CM_A510 Say 'Y' here if you want your kernel to support the CompuLab CM-A510 Board. +config MACH_DOVE_DT + bool "Marvell Dove Flattened Device Tree" + select USE_OF + help + Say 'Y' here if you want your kernel to support the + Marvell Dove using flattened device tree. + endmenu endif diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index fa0f018..5e683ba 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -1,4 +1,4 @@ -obj-y += common.o addr-map.o irq.o pcie.o mpp.o - +obj-y += common.o addr-map.o irq.o mpp.o +obj-$(CONFIG_PCI) += pcie.o obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o obj-$(CONFIG_MACH_CM_A510) += cm-a510.o diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot index 760a0ef..cfac9c5 100644 --- a/arch/arm/mach-dove/Makefile.boot +++ b/arch/arm/mach-dove/Makefile.boot @@ -1,3 +1,7 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_MACH_DOVE_DT) += dove-dove-db.dtb +dtb-$(CONFIG_MACH_DOVE_DT) += dove-cm-a510.dtb +dtb-$(CONFIG_MACH_DOVE_DT) += dove-cubox.dtb diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 950ad95..28475bb 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -16,6 +16,8 @@ #include <linux/clk-provider.h> #include <linux/ata_platform.h> #include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_platform.h> #include <asm/page.h> #include <asm/setup.h> #include <asm/timex.h> @@ -24,6 +26,7 @@ #include <asm/mach/time.h> #include <asm/mach/pci.h> #include <mach/dove.h> +#include <mach/pm.h> #include <mach/bridge-regs.h> #include <asm/mach/arch.h> #include <linux/irq.h> @@ -33,8 +36,6 @@ #include <plat/addr-map.h> #include "common.h" -static int get_tclk(void); - /***************************************************************************** * I/O Address Mapping ****************************************************************************/ @@ -60,14 +61,69 @@ void __init dove_map_io(void) /***************************************************************************** * CLK tree ****************************************************************************/ +static int dove_tclk; + +static DEFINE_SPINLOCK(gating_lock); static struct clk *tclk; -static void __init clk_init(void) +static struct clk __init *dove_register_gate(const char *name, + const char *parent, u8 bit_idx) { - tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT, - get_tclk()); + return clk_register_gate(NULL, name, parent, 0, + (void __iomem *)CLOCK_GATING_CONTROL, + bit_idx, 0, &gating_lock); +} + +static void __init dove_clk_init(void) +{ + struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1; + struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma; + struct clk *xor0, *xor1, *ge, *gephy; - orion_clkdev_init(tclk); + tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT, + dove_tclk); + + usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0); + usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1); + sata = dove_register_gate("sata", "tclk", CLOCK_GATING_BIT_SATA); + pex0 = dove_register_gate("pex0", "tclk", CLOCK_GATING_BIT_PCIE0); + pex1 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE1); + sdio0 = dove_register_gate("sdio0", "tclk", CLOCK_GATING_BIT_SDIO0); + sdio1 = dove_register_gate("sdio1", "tclk", CLOCK_GATING_BIT_SDIO1); + nand = dove_register_gate("nand", "tclk", CLOCK_GATING_BIT_NAND); + camera = dove_register_gate("camera", "tclk", CLOCK_GATING_BIT_CAMERA); + i2s0 = dove_register_gate("i2s0", "tclk", CLOCK_GATING_BIT_I2S0); + i2s1 = dove_register_gate("i2s1", "tclk", CLOCK_GATING_BIT_I2S1); + crypto = dove_register_gate("crypto", "tclk", CLOCK_GATING_BIT_CRYPTO); + ac97 = dove_register_gate("ac97", "tclk", CLOCK_GATING_BIT_AC97); + pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA); + xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0); + xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1); + gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY); + ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE); + + orion_clkdev_add(NULL, "orion_spi.0", tclk); + orion_clkdev_add(NULL, "orion_spi.1", tclk); + orion_clkdev_add(NULL, "orion_wdt", tclk); + orion_clkdev_add(NULL, "mv64xxx_i2c.0", tclk); + + orion_clkdev_add(NULL, "orion-ehci.0", usb0); + orion_clkdev_add(NULL, "orion-ehci.1", usb1); + orion_clkdev_add(NULL, "mv643xx_eth.0", ge); + orion_clkdev_add("0", "sata_mv.0", sata); + orion_clkdev_add("0", "pcie", pex0); + orion_clkdev_add("1", "pcie", pex1); + orion_clkdev_add(NULL, "sdhci-dove.0", sdio0); + orion_clkdev_add(NULL, "sdhci-dove.1", sdio1); + orion_clkdev_add(NULL, "orion_nand", nand); + orion_clkdev_add(NULL, "cafe1000-ccic.0", camera); + orion_clkdev_add(NULL, "kirkwood-i2s.0", i2s0); + orion_clkdev_add(NULL, "kirkwood-i2s.1", i2s1); + orion_clkdev_add(NULL, "mv_crypto", crypto); + orion_clkdev_add(NULL, "dove-ac97", ac97); + orion_clkdev_add(NULL, "dove-pdma", pdma); + orion_clkdev_add(NULL, "mv_xor_shared.0", xor0); + orion_clkdev_add(NULL, "mv_xor_shared.1", xor1); } /***************************************************************************** @@ -178,16 +234,16 @@ void __init dove_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); } -static int get_tclk(void) +static int __init dove_find_tclk(void) { - /* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */ return 166666667; } static void __init dove_timer_init(void) { + dove_tclk = dove_find_tclk(); orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, - IRQ_DOVE_BRIDGE, get_tclk()); + IRQ_DOVE_BRIDGE, dove_tclk); } struct sys_timer dove_timer = { @@ -195,6 +251,15 @@ struct sys_timer dove_timer = { }; /***************************************************************************** + * Cryptographic Engines and Security Accelerator (CESA) + ****************************************************************************/ +void __init dove_crypto_init(void) +{ + orion_crypto_init(DOVE_CRYPT_PHYS_BASE, DOVE_CESA_PHYS_BASE, + DOVE_CESA_SIZE, IRQ_DOVE_CRYPTO); +} + +/***************************************************************************** * XOR 0 ****************************************************************************/ void __init dove_xor0_init(void) @@ -275,8 +340,8 @@ void __init dove_sdio1_init(void) void __init dove_init(void) { - printk(KERN_INFO "Dove 88AP510 SoC, "); - printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); + pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", + (dove_tclk + 499999) / 1000000); #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); @@ -284,7 +349,7 @@ void __init dove_init(void) dove_setup_cpu_mbus(); /* Setup root of clk tree */ - clk_init(); + dove_clk_init(); /* internal devices that every board has */ dove_rtc_init(); @@ -307,3 +372,67 @@ void dove_restart(char mode, const char *cmd) while (1) ; } + +#if defined(CONFIG_MACH_DOVE_DT) +/* + * Auxdata required until real OF clock provider + */ +struct of_dev_auxdata dove_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL), + OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), + OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL), + OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL), + OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL), + {}, +}; + +static struct mv643xx_eth_platform_data dove_dt_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, +}; + +static void __init dove_dt_init(void) +{ + pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", + (dove_tclk + 499999) / 1000000); + +#ifdef CONFIG_CACHE_TAUROS2 + tauros2_init(); +#endif + dove_setup_cpu_mbus(); + + /* Setup root of clk tree */ + dove_clk_init(); + + /* Internal devices not ported to DT yet */ + dove_rtc_init(); + dove_xor0_init(); + dove_xor1_init(); + + dove_ge00_init(&dove_dt_ge00_data); + dove_ehci0_init(); + dove_ehci1_init(); + dove_pcie_init(1, 1); + dove_crypto_init(); + + of_platform_populate(NULL, of_default_bus_match_table, + dove_auxdata_lookup, NULL); +} + +static const char * const dove_dt_board_compat[] = { + "marvell,dove", + NULL +}; + +DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") + .map_io = dove_map_io, + .init_early = dove_init_early, + .init_irq = orion_dt_init_irq, + .timer = &dove_timer, + .init_machine = dove_dt_init, + .restart = dove_restart, + .dt_compat = dove_dt_board_compat, +MACHINE_END +#endif diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h index 6432a3b..1a23340 100644 --- a/arch/arm/mach-dove/common.h +++ b/arch/arm/mach-dove/common.h @@ -26,7 +26,11 @@ void dove_init_irq(void); void dove_setup_cpu_mbus(void); void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data); void dove_sata_init(struct mv_sata_platform_data *sata_data); +#ifdef CONFIG_PCI void dove_pcie_init(int init_port0, int init_port1); +#else +static inline void dove_pcie_init(int init_port0, int init_port1) { } +#endif void dove_ehci0_init(void); void dove_ehci1_init(void); void dove_uart0_init(void); diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h index 3ad9f94..7bcd0df 100644 --- a/arch/arm/mach-dove/include/mach/pm.h +++ b/arch/arm/mach-dove/include/mach/pm.h @@ -13,24 +13,42 @@ #include <mach/irqs.h> #define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38) -#define CLOCK_GATING_USB0_MASK (1 << 0) -#define CLOCK_GATING_USB1_MASK (1 << 1) -#define CLOCK_GATING_GBE_MASK (1 << 2) -#define CLOCK_GATING_SATA_MASK (1 << 3) -#define CLOCK_GATING_PCIE0_MASK (1 << 4) -#define CLOCK_GATING_PCIE1_MASK (1 << 5) -#define CLOCK_GATING_SDIO0_MASK (1 << 8) -#define CLOCK_GATING_SDIO1_MASK (1 << 9) -#define CLOCK_GATING_NAND_MASK (1 << 10) -#define CLOCK_GATING_CAMERA_MASK (1 << 11) -#define CLOCK_GATING_I2S0_MASK (1 << 12) -#define CLOCK_GATING_I2S1_MASK (1 << 13) -#define CLOCK_GATING_CRYPTO_MASK (1 << 15) -#define CLOCK_GATING_AC97_MASK (1 << 21) -#define CLOCK_GATING_PDMA_MASK (1 << 22) -#define CLOCK_GATING_XOR0_MASK (1 << 23) -#define CLOCK_GATING_XOR1_MASK (1 << 24) -#define CLOCK_GATING_GIGA_PHY_MASK (1 << 30) +#define CLOCK_GATING_BIT_USB0 0 +#define CLOCK_GATING_BIT_USB1 1 +#define CLOCK_GATING_BIT_GBE 2 +#define CLOCK_GATING_BIT_SATA 3 +#define CLOCK_GATING_BIT_PCIE0 4 +#define CLOCK_GATING_BIT_PCIE1 5 +#define CLOCK_GATING_BIT_SDIO0 8 +#define CLOCK_GATING_BIT_SDIO1 9 +#define CLOCK_GATING_BIT_NAND 10 +#define CLOCK_GATING_BIT_CAMERA 11 +#define CLOCK_GATING_BIT_I2S0 12 +#define CLOCK_GATING_BIT_I2S1 13 +#define CLOCK_GATING_BIT_CRYPTO 15 +#define CLOCK_GATING_BIT_AC97 21 +#define CLOCK_GATING_BIT_PDMA 22 +#define CLOCK_GATING_BIT_XOR0 23 +#define CLOCK_GATING_BIT_XOR1 24 +#define CLOCK_GATING_BIT_GIGA_PHY 30 +#define CLOCK_GATING_USB0_MASK (1 << CLOCK_GATING_BIT_USB0) +#define CLOCK_GATING_USB1_MASK (1 << CLOCK_GATING_BIT_USB1) +#define CLOCK_GATING_GBE_MASK (1 << CLOCK_GATING_BIT_GBE) +#define CLOCK_GATING_SATA_MASK (1 << CLOCK_GATING_BIT_SATA) +#define CLOCK_GATING_PCIE0_MASK (1 << CLOCK_GATING_BIT_PCIE0) +#define CLOCK_GATING_PCIE1_MASK (1 << CLOCK_GATING_BIT_PCIE1) +#define CLOCK_GATING_SDIO0_MASK (1 << CLOCK_GATING_BIT_SDIO0) +#define CLOCK_GATING_SDIO1_MASK (1 << CLOCK_GATING_BIT_SDIO1) +#define CLOCK_GATING_NAND_MASK (1 << CLOCK_GATING_BIT_NAND) +#define CLOCK_GATING_CAMERA_MASK (1 << CLOCK_GATING_BIT_CAMERA) +#define CLOCK_GATING_I2S0_MASK (1 << CLOCK_GATING_BIT_I2S0) +#define CLOCK_GATING_I2S1_MASK (1 << CLOCK_GATING_BIT_I2S1) +#define CLOCK_GATING_CRYPTO_MASK (1 << CLOCK_GATING_BIT_CRYPTO) +#define CLOCK_GATING_AC97_MASK (1 << CLOCK_GATING_BIT_AC97) +#define CLOCK_GATING_PDMA_MASK (1 << CLOCK_GATING_BIT_PDMA) +#define CLOCK_GATING_XOR0_MASK (1 << CLOCK_GATING_BIT_XOR0) +#define CLOCK_GATING_XOR1_MASK (1 << CLOCK_GATING_BIT_XOR1) +#define CLOCK_GATING_GIGA_PHY_MASK (1 << CLOCK_GATING_BIT_GIGA_PHY) #define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50) #define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54) diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index ca5c15a..50bca50 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -94,6 +94,13 @@ config MACH_TS219_DT or MV6282. If you have the wrong one, the buttons will not work. +config MACH_DOCKSTAR_DT + bool "Seagate FreeAgent Dockstar (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Seagate FreeAgent Dockstar (Flattened Device Tree). + config MACH_GOFLEXNET_DT bool "Seagate GoFlex Net (Flattened Device Tree)" select ARCH_KIRKWOOD_DT @@ -109,6 +116,20 @@ config MACH_LSXL_DT Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using Flattened Device Tree. +config MACH_IOMEGA_IX2_200_DT + bool "Iomega StorCenter ix2-200 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Iomega StorCenter ix2-200 (Flattened Device Tree). + +config MACH_KM_KIRKWOOD_DT + bool "Keymile Kirkwood Reference Design (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Keymile Kirkwood Reference Desgin, using Flattened Device Tree. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 055c85a..294779f 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -26,5 +26,8 @@ obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o +obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o +obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o +obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 760a0ef..d90b3cb 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -1,3 +1,7 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += kirkwood-iomega_ix2_200.dtb +dtb-$(CONFIG_MACH_DOCKSTAR_DT) += kirkwood-dockstar.dtb +dtb-$(CONFIG_MACH_KM_KIRKWOOD_DT) += kirkwood-km_kirkwood.dtb diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c new file mode 100644 index 0000000..6beff21 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-dockstar.c @@ -0,0 +1,61 @@ +/* + * arch/arm/mach-kirkwood/board-dockstar.c + * + * Seagate FreeAgent Dockstar Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Copied and modified for Seagate GoFlex Net support by + * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's + * GoFlex kernel patches. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/kirkwood.h> +#include <mach/bridge-regs.h> +#include <plat/mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data dockstar_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int dockstar_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP46_GPIO, /* LED green */ + MPP47_GPIO, /* LED orange */ + 0 +}; + +void __init dockstar_dt_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(dockstar_mpp_config); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + pr_err("can't setup GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&dockstar_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index e4eb450..4965546 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -81,12 +81,21 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("qnap,ts219")) qnap_dt_ts219_init(); + if (of_machine_is_compatible("seagate,dockstar")) + dockstar_dt_init(); + if (of_machine_is_compatible("seagate,goflexnet")) goflexnet_init(); if (of_machine_is_compatible("buffalo,lsxl")) lsxl_init(); + if (of_machine_is_compatible("iom,ix2-200")) + iomega_ix2_200_init(); + + if (of_machine_is_compatible("keymile,km_kirkwood")) + km_kirkwood_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -98,8 +107,11 @@ static const char *kirkwood_dt_board_compat[] = { "iom,iconnect", "raidsonic,ib-nas62x0", "qnap,ts219", + "seagate,dockstar", "seagate,goflexnet", "buffalo,lsxl", + "iom,ix2-200", + "keymile,km_kirkwood", NULL }; diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c new file mode 100644 index 0000000..158fb97 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-kirkwood/board-iomega_ix2_200.c + * + * Iomega StorCenter ix2-200 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static unsigned int iomega_ix2_200_mpp_config[] __initdata = { + MPP12_GPIO, /* Reset Button */ + MPP14_GPIO, /* Power Button */ + MPP15_GPIO, /* Backup LED (blue) */ + MPP16_GPIO, /* Power LED (white) */ + MPP35_GPIO, /* OTB Button */ + MPP36_GPIO, /* Rebuild LED (white) */ + MPP37_GPIO, /* Health LED (red) */ + MPP38_GPIO, /* SATA LED brightness control 1 */ + MPP39_GPIO, /* SATA LED brightness control 2 */ + MPP40_GPIO, /* Backup LED brightness control 1 */ + MPP41_GPIO, /* Backup LED brightness control 2 */ + MPP42_GPIO, /* Power LED brightness control 1 */ + MPP43_GPIO, /* Power LED brightness control 2 */ + MPP44_GPIO, /* Health LED brightness control 1 */ + MPP45_GPIO, /* Health LED brightness control 2 */ + MPP46_GPIO, /* Rebuild LED brightness control 1 */ + MPP47_GPIO, /* Rebuild LED brightness control 2 */ + 0 +}; + +void __init iomega_ix2_200_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(iomega_ix2_200_mpp_config); + + kirkwood_ehci_init(); + + kirkwood_ge01_init(&iomega_ix2_200_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c new file mode 100644 index 0000000..f7d3283 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c @@ -0,0 +1,57 @@ +/* + * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern + * Valentin Longchamp <valentin.longchamp@keymile.com> + * + * arch/arm/mach-kirkwood/board-km_kirkwood.c + * + * Keymile km_kirkwood Reference Desing Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/clk.h> +#include <linux/clk-private.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int km_kirkwood_mpp_config[] __initdata = { + MPP8_GPIO, /* I2C SDA */ + MPP9_GPIO, /* I2C SCL */ + 0 +}; + +void __init km_kirkwood_init(void) +{ + struct clk *sata_clk; + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(km_kirkwood_mpp_config); + + /* + * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing + * SATA bits (14-15) of the Clock Gating Control Register. Since these + * devices are also not present in this variant, their clocks get + * disabled because unused when clk_disable_unused() gets called. + * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED + */ + sata_clk = clk_get_sys("sata_mv.0", "0"); + if (!IS_ERR(sata_clk)) + sata_clk->flags |= CLK_IGNORE_UNUSED; + sata_clk = clk_get_sys("sata_mv.0", "1"); + if (!IS_ERR(sata_clk)) + sata_clk->flags |= CLK_IGNORE_UNUSED; + + kirkwood_ehci_init(); + kirkwood_ge00_init(&km_kirkwood_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 304dd1a..bcffd7c 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -82,6 +82,12 @@ void ib62x0_init(void); static inline void ib62x0_init(void) {}; #endif +#ifdef CONFIG_MACH_DOCKSTAR_DT +void dockstar_dt_init(void); +#else +static inline void dockstar_dt_init(void) {}; +#endif + #ifdef CONFIG_MACH_GOFLEXNET_DT void goflexnet_init(void); #else @@ -94,6 +100,18 @@ void lsxl_init(void); static inline void lsxl_init(void) {}; #endif +#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT +void iomega_ix2_200_init(void); +#else +static inline void iomega_ix2_200_init(void) {}; +#endif + +#ifdef CONFIG_MACH_KM_KIRKWOOD_DT +void km_kirkwood_init(void); +#else +static inline void km_kirkwood_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); |