Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (40 commits)
  USB: open disconnect race in usblcd
  USB: disconnect open race in legousbtower
  USB: open disconnect race in iowarrior
  USB: missing error check in emi62
  USB: missing error check in emi26
  USB: usb_serial_resume bug fix
  USB: remove new OHCI build warnings
  USB: amd5536udc - remove set_mwi() compiler warning
  USB: usbserial - fix potential deadlock between write() and IRQ
  usb: serial/pl2303: support for IO Data Device RSAQ5
  USB: fix read vs. disconnect race in cytherm driver
  USB: fix locking in idmouse
  USB: fix interface sysfs file-creation bug
  USB: fix ssb_ohci_probe() build bug
  USB: pl2303: remove can't happen checks, set speed properly and report baud rate
  USB: mos7840: Clean up old checks and stuff
  USB rio500.c: fix check-after-use
  USB iowarrior.c: fix check-after-use
  USB: add URB_FREE_BUFFER to permissible flags
  USB: isd200: sort out USB/IDE dependancy mess
  ...

37 files changed, 397 insertions, 254 deletions

diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 1031890..3bb5d24 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1875,6 +1875,7 @@ uart_set_options(struct uart_port *port, struct console *co,
 		 int baud, int parity, int bits, int flow)
 {
 	struct ktermios termios;
+	static struct ktermios dummy;
 	int i;
 
 	/*
@@ -1920,7 +1921,7 @@ uart_set_options(struct uart_port *port, struct console *co,
 	 */
 	port->mctrl |= TIOCM_DTR;
 
-	port->ops->set_termios(port, &termios, NULL);
+	port->ops->set_termios(port, &termios, &dummy);
 	co->cflag = termios.c_cflag;
 
 	return 0;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 8bdaa15..eb4ac47 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1641,7 +1641,13 @@ free_interfaces:
 				intf->dev.bus_id, ret);
 			continue;
 		}
-		usb_create_sysfs_intf_files (intf);
+
+		/* The driver's probe method can call usb_set_interface(),
+		 * which would mean the interface's sysfs files are already
+		 * created.  Just in case, we'll remove them first.
+		 */
+		usb_remove_sysfs_intf_files(intf);
+		usb_create_sysfs_intf_files(intf);
 	}
 
 	usb_autosuspend_device(dev);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index c20c03a..d05ead2 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -372,7 +372,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 
 	/* enforce simple/standard policy */
 	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP |
-			URB_NO_INTERRUPT | URB_DIR_MASK);
+			URB_NO_INTERRUPT | URB_DIR_MASK | URB_FREE_BUFFER);
 	switch (xfertype) {
 	case USB_ENDPOINT_XFER_BULK:
 		if (is_out)
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 1c80406..c72e962 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -3289,7 +3289,7 @@ static int udc_pci_probe(
 	dev->chiprev = pdev->revision;
 
 	pci_set_master(pdev);
-	pci_set_mwi(pdev);
+	pci_try_set_mwi(pdev);
 
 	/* init dma pools */
 	if (use_dma) {
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index c978d62..177e78e 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -156,7 +156,7 @@ config USB_OHCI_HCD_PCI
 
 config USB_OHCI_HCD_SSB
 	bool "OHCI support for Broadcom SSB OHCI core"
-	depends on USB_OHCI_HCD && SSB && EXPERIMENTAL
+	depends on USB_OHCI_HCD && (SSB = y || SSB = CONFIG_USB_OHCI_HCD) && EXPERIMENTAL
 	default n
 	---help---
 	  Support for the Sonics Silicon Backplane (SSB) attached
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 240c7f5..704f33f 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -80,7 +80,10 @@ static const char	hcd_name [] = "ohci_hcd";
 static void ohci_dump (struct ohci_hcd *ohci, int verbose);
 static int ohci_init (struct ohci_hcd *ohci);
 static void ohci_stop (struct usb_hcd *hcd);
+
+#if defined(CONFIG_PM) || defined(CONFIG_PCI)
 static int ohci_restart (struct ohci_hcd *ohci);
+#endif
 
 #include "ohci-hub.c"
 #include "ohci-dbg.c"
@@ -396,7 +399,7 @@ static int check_ed(struct ohci_hcd *ohci, struct ed *ed)
  */
 static void unlink_watchdog_func(unsigned long _ohci)
 {
-	long		flags;
+	unsigned long	flags;
 	unsigned	max;
 	unsigned	seen_count = 0;
 	unsigned	i;
@@ -893,6 +896,8 @@ static void ohci_stop (struct usb_hcd *hcd)
 
 /*-------------------------------------------------------------------------*/
 
+#if defined(CONFIG_PM) || defined(CONFIG_PCI)
+
 /* must not be called from interrupt context */
 static int ohci_restart (struct ohci_hcd *ohci)
 {
@@ -954,6 +959,8 @@ static int ohci_restart (struct ohci_hcd *ohci)
 	return 0;
 }
 
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 #define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index e5d60d5..60379b1 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -1271,7 +1271,8 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
 	} else if (qh->period != urb->interval) {
 		return -EINVAL;		/* Can't change the period */
 
-	} else {	/* Pick up where the last URB leaves off */
+	} else {
+		/* Find the next unused frame */
 		if (list_empty(&qh->queue)) {
 			frame = qh->iso_frame;
 		} else {
@@ -1283,10 +1284,18 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
 					lurb->number_of_packets *
 					lurb->interval;
 		}
-		if (urb->transfer_flags & URB_ISO_ASAP)
-			urb->start_frame = frame;
-		else if (urb->start_frame != frame)
-			return -EINVAL;
+		if (urb->transfer_flags & URB_ISO_ASAP) {
+			/* Skip some frames if necessary to insure
+			 * the start frame is in the future.
+			 */
+			uhci_get_current_frame_number(uhci);
+			if (uhci_frame_before_eq(frame, uhci->frame_number)) {
+				frame = uhci->frame_number + 1;
+				frame += ((qh->phase - frame) &
+					(qh->period - 1));
+			}
+		}	/* Otherwise pick up where the last URB leaves off */
+		urb->start_frame = frame;
 	}
 
 	/* Make sure we won't have to go too far into the future */
diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c
index 2677fea..1cd9e7e 100644
--- a/drivers/usb/misc/cytherm.c
+++ b/drivers/usb/misc/cytherm.c
@@ -399,7 +399,6 @@ static void cytherm_disconnect(struct usb_interface *interface)
 	struct usb_cytherm *dev;
 
 	dev = usb_get_intfdata (interface);
-	usb_set_intfdata (interface, NULL);
 
 	device_remove_file(&interface->dev, &dev_attr_brightness);
 	device_remove_file(&interface->dev, &dev_attr_temp);
@@ -407,6 +406,9 @@ static void cytherm_disconnect(struct usb_interface *interface)
 	device_remove_file(&interface->dev, &dev_attr_port0);
 	device_remove_file(&interface->dev, &dev_attr_port1);
 
+	/* first remove the files, then NULL the pointer */
+	usb_set_intfdata (interface, NULL);
+
 	usb_put_dev(dev->udev);
 
 	kfree(dev);
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index cd13757..4a09b87 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -114,6 +114,10 @@ static int emi26_load_firmware (struct usb_device *dev)
 
 	/* De-assert reset (let the CPU run) */
 	err = emi26_set_reset(dev,0);
+	if (err < 0) {
+		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+		goto wraperr;
+	}
 	msleep(250);	/* let device settle */
 
 	/* 2. We upload the FPGA firmware into the EMI
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 4758cc5..d136241 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -123,6 +123,10 @@ static int emi62_load_firmware (struct usb_device *dev)
 
 	/* De-assert reset (let the CPU run) */
 	err = emi62_set_reset(dev,0);
+	if (err < 0) {
+		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+		goto wraperr;
+	}
 	msleep(250);	/* let device settle */
 
 	/* 2. We upload the FPGA firmware into the EMI
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index d3d8cd6..148b7fe 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -147,7 +147,7 @@ struct u132_target {
 /* Structure to hold all of our device specific stuff*/
 struct usb_ftdi {
         struct list_head ftdi_list;
-        struct semaphore u132_lock;
+        struct mutex u132_lock;
         int command_next;
         int command_head;
         struct u132_command command[COMMAND_SIZE];
@@ -330,39 +330,39 @@ static int ftdi_elan_hcd_init(struct usb_ftdi *ftdi)
 
 static void ftdi_elan_abandon_completions(struct usb_ftdi *ftdi)
 {
-        down(&ftdi->u132_lock);
+        mutex_lock(&ftdi->u132_lock);
         while (ftdi->respond_next > ftdi->respond_head) {
                 struct u132_respond *respond = &ftdi->respond[RESPOND_MASK &
                         ftdi->respond_head++];
                 *respond->result = -ESHUTDOWN;
                 *respond->value = 0;
                 complete(&respond->wait_completion);
-        } up(&ftdi->u132_lock);
+        } mutex_unlock(&ftdi->u132_lock);
 }
 
 static void ftdi_elan_abandon_targets(struct usb_ftdi *ftdi)
 {
         int ed_number = 4;
-        down(&ftdi->u132_lock);
+        mutex_lock(&ftdi->u132_lock);
         while (ed_number-- > 0) {
                 struct u132_target *target = &ftdi->target[ed_number];
                 if (target->active == 1) {
                         target->condition_code = TD_DEVNOTRESP;
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         ftdi_elan_do_callback(ftdi, target, NULL, 0);
-                        down(&ftdi->u132_lock);
+                        mutex_lock(&ftdi->u132_lock);
                 }
         }
         ftdi->recieved = 0;
         ftdi->expected = 4;
         ftdi->ed_found = 0;
-        up(&ftdi->u132_lock);
+        mutex_unlock(&ftdi->u132_lock);
 }
 
 static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi)
 {
         int ed_number = 4;
-        down(&ftdi->u132_lock);
+        mutex_lock(&ftdi->u132_lock);
         while (ed_number-- > 0) {
                 struct u132_target *target = &ftdi->target[ed_number];
                 target->abandoning = 1;
@@ -382,9 +382,9 @@ static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi)
                                 ftdi->command_next += 1;
                                 ftdi_elan_kick_command_queue(ftdi);
                         } else {
-                                up(&ftdi->u132_lock);
+                                mutex_unlock(&ftdi->u132_lock);
                                 msleep(100);
-                                down(&ftdi->u132_lock);
+                                mutex_lock(&ftdi->u132_lock);
                                 goto wait_1;
                         }
                 }
@@ -404,9 +404,9 @@ static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi)
                                 ftdi->command_next += 1;
                                 ftdi_elan_kick_command_queue(ftdi);
                         } else {
-                                up(&ftdi->u132_lock);
+                                mutex_unlock(&ftdi->u132_lock);
                                 msleep(100);
-                                down(&ftdi->u132_lock);
+                                mutex_lock(&ftdi->u132_lock);
                                 goto wait_2;
                         }
                 }
@@ -414,13 +414,13 @@ static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi)
         ftdi->recieved = 0;
         ftdi->expected = 4;
         ftdi->ed_found = 0;
-        up(&ftdi->u132_lock);
+        mutex_unlock(&ftdi->u132_lock);
 }
 
 static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi)
 {
         int ed_number = 4;
-        down(&ftdi->u132_lock);
+        mutex_lock(&ftdi->u132_lock);
         while (ed_number-- > 0) {
                 struct u132_target *target = &ftdi->target[ed_number];
                 target->abandoning = 1;
@@ -440,9 +440,9 @@ static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi)
                                 ftdi->command_next += 1;
                                 ftdi_elan_kick_command_queue(ftdi);
                         } else {
-                                up(&ftdi->u132_lock);
+                                mutex_unlock(&ftdi->u132_lock);
                                 msleep(100);
-                                down(&ftdi->u132_lock);
+                                mutex_lock(&ftdi->u132_lock);
                                 goto wait;
                         }
                 }
@@ -450,7 +450,7 @@ static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi)
         ftdi->recieved = 0;
         ftdi->expected = 4;
         ftdi->ed_found = 0;
-        up(&ftdi->u132_lock);
+        mutex_unlock(&ftdi->u132_lock);
 }
 
 static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi)
@@ -886,14 +886,14 @@ static char *have_ed_set_response(struct usb_ftdi *ftdi,
         char *b)
 {
         int payload = (ed_length >> 0) & 0x07FF;
-        down(&ftdi->u132_lock);
+        mutex_lock(&ftdi->u132_lock);
         target->actual = 0;
         target->non_null = (ed_length >> 15) & 0x0001;
         target->repeat_number = (ed_length >> 11) & 0x000F;
         if (ed_type == 0x02) {
                 if (payload == 0 || target->abandoning > 0) {
                         target->abandoning = 0;
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
                                 payload);
                         ftdi->recieved = 0;
@@ -903,13 +903,13 @@ static char *have_ed_set_response(struct usb_ftdi *ftdi,
                 } else {
                         ftdi->expected = 4 + payload;
                         ftdi->ed_found = 1;
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         return b;
                 }
         } else if (ed_type == 0x03) {
                 if (payload == 0 || target->abandoning > 0) {
                         target->abandoning = 0;
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
                                 payload);
                         ftdi->recieved = 0;
@@ -919,12 +919,12 @@ static char *have_ed_set_response(struct usb_ftdi *ftdi,
                 } else {
                         ftdi->expected = 4 + payload;
                         ftdi->ed_found = 1;
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         return b;
                 }
         } else if (ed_type == 0x01) {
                 target->abandoning = 0;
-                up(&ftdi->u132_lock);
+                mutex_unlock(&ftdi->u132_lock);
                 ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
                         payload);
                 ftdi->recieved = 0;
@@ -933,7 +933,7 @@ static char *have_ed_set_response(struct usb_ftdi *ftdi,
                 return ftdi->response;
         } else {
                 target->abandoning = 0;
-                up(&ftdi->u132_lock);
+                mutex_unlock(&ftdi->u132_lock);
                 ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
                         payload);
                 ftdi->recieved = 0;
@@ -947,12 +947,12 @@ static char *have_ed_get_response(struct usb_ftdi *ftdi,
         struct u132_target *target, u16 ed_length, int ed_number, int ed_type,
         char *b)
 {
-        down(&ftdi->u132_lock);
+        mutex_lock(&ftdi->u132_lock);
         target->condition_code = TD_DEVNOTRESP;
         target->actual = (ed_length >> 0) & 0x01FF;
         target->non_null = (ed_length >> 15) & 0x0001;
         target->repeat_number = (ed_length >> 11) & 0x000F;
-        up(&ftdi->u132_lock);
+        mutex_unlock(&ftdi->u132_lock);
         if (target->active)
                 ftdi_elan_do_callback(ftdi, target, NULL, 0);
         target->abandoning = 0;
@@ -1278,7 +1278,7 @@ static int ftdi_elan_write_reg(struct usb_ftdi *ftdi, u32 data)
                 return -ENODEV;
         } else {
                 int command_size;
-                down(&ftdi->u132_lock);
+                mutex_lock(&ftdi->u132_lock);
                 command_size = ftdi->command_next - ftdi->command_head;
                 if (command_size < COMMAND_SIZE) {
                         struct u132_command *command = &ftdi->command[
@@ -1292,10 +1292,10 @@ static int ftdi_elan_write_reg(struct usb_ftdi *ftdi, u32 data)
                         command->buffer = &command->value;
                         ftdi->command_next += 1;
                         ftdi_elan_kick_command_queue(ftdi);
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         return 0;
                 } else {
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         msleep(100);
                         goto wait;
                 }
@@ -1310,7 +1310,7 @@ static int ftdi_elan_write_config(struct usb_ftdi *ftdi, int config_offset,
                 return -ENODEV;
         } else {
                 int command_size;
-                down(&ftdi->u132_lock);
+                mutex_lock(&ftdi->u132_lock);
                 command_size = ftdi->command_next - ftdi->command_head;
                 if (command_size < COMMAND_SIZE) {
                         struct u132_command *command = &ftdi->command[
@@ -1324,10 +1324,10 @@ static int ftdi_elan_write_config(struct usb_ftdi *ftdi, int config_offset,
                         command->buffer = &command->value;
                         ftdi->command_next += 1;
                         ftdi_elan_kick_command_queue(ftdi);
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         return 0;
                 } else {
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         msleep(100);
                         goto wait;
                 }
@@ -1342,7 +1342,7 @@ static int ftdi_elan_write_pcimem(struct usb_ftdi *ftdi, int mem_offset,
                 return -ENODEV;
         } else {
                 int command_size;
-                down(&ftdi->u132_lock);
+                mutex_lock(&ftdi->u132_lock);
                 command_size = ftdi->command_next - ftdi->command_head;
                 if (command_size < COMMAND_SIZE) {
                         struct u132_command *command = &ftdi->command[
@@ -1356,10 +1356,10 @@ static int ftdi_elan_write_pcimem(struct usb_ftdi *ftdi, int mem_offset,
                         command->buffer = &command->value;
                         ftdi->command_next += 1;
                         ftdi_elan_kick_command_queue(ftdi);
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         return 0;
                 } else {
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         msleep(100);
                         goto wait;
                 }
@@ -1382,7 +1382,7 @@ static int ftdi_elan_read_reg(struct usb_ftdi *ftdi, u32 *data)
         } else {
                 int command_size;
                 int respond_size;
-                down(&ftdi->u132_lock);
+                mutex_lock(&ftdi->u132_lock);
                 command_size = ftdi->command_next - ftdi->command_head;
                 respond_size = ftdi->respond_next - ftdi->respond_head;
                 if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE)
@@ -1405,11 +1405,11 @@ static int ftdi_elan_read_reg(struct usb_ftdi *ftdi, u32 *data)
                         ftdi->command_next += 1;
                         ftdi->respond_next += 1;
                         ftdi_elan_kick_command_queue(ftdi);
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         wait_for_completion(&respond->wait_completion);
                         return result;
                 } else {
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         msleep(100);
                         goto wait;
                 }
@@ -1425,7 +1425,7 @@ static int ftdi_elan_read_config(struct usb_ftdi *ftdi, int config_offset,
         } else {
                 int command_size;
                 int respond_size;
-                down(&ftdi->u132_lock);
+                mutex_lock(&ftdi->u132_lock);
                 command_size = ftdi->command_next - ftdi->command_head;
                 respond_size = ftdi->respond_next - ftdi->respond_head;
                 if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE)
@@ -1449,11 +1449,11 @@ static int ftdi_elan_read_config(struct usb_ftdi *ftdi, int config_offset,
                         ftdi->command_next += 1;
                         ftdi->respond_next += 1;
                         ftdi_elan_kick_command_queue(ftdi);
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         wait_for_completion(&respond->wait_completion);
                         return result;
                 } else {
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         msleep(100);
                         goto wait;
                 }
@@ -1469,7 +1469,7 @@ static int ftdi_elan_read_pcimem(struct usb_ftdi *ftdi, int mem_offset,
         } else {
                 int command_size;
                 int respond_size;
-                down(&ftdi->u132_lock);
+                mutex_lock(&ftdi->u132_lock);
                 command_size = ftdi->command_next - ftdi->command_head;
                 respond_size = ftdi->respond_next - ftdi->respond_head;
                 if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE)
@@ -1493,11 +1493,11 @@ static int ftdi_elan_read_pcimem(struct usb_ftdi *ftdi, int mem_offset,
                         ftdi->command_next += 1;
                         ftdi->respond_next += 1;
                         ftdi_elan_kick_command_queue(ftdi);
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         wait_for_completion(&respond->wait_completion);
                         return result;
                 } else {
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         msleep(100);
                         goto wait;
                 }
@@ -1529,7 +1529,7 @@ static int ftdi_elan_edset_setup(struct usb_ftdi *ftdi, u8 ed_number,
                 return -ENODEV;
         } else {
                 int command_size;
-                down(&ftdi->u132_lock);
+                mutex_lock(&ftdi->u132_lock);
                 command_size = ftdi->command_next - ftdi->command_head;
                 if (command_size < COMMAND_SIZE) {
                         struct u132_target *target = &ftdi->target[ed];
@@ -1550,10 +1550,10 @@ static int ftdi_elan_edset_setup(struct usb_ftdi *ftdi, u8 ed_number,
                         target->active = 1;
                         ftdi->command_next += 1;
                         ftdi_elan_kick_command_queue(ftdi);
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         return 0;
                 } else {
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         msleep(100);
                         goto wait;
                 }
@@ -1586,7 +1586,7 @@ static int ftdi_elan_edset_input(struct usb_ftdi *ftdi, u8 ed_number,
                 return -ENODEV;
         } else {
                 int command_size;
-                down(&ftdi->u132_lock);
+                mutex_lock(&ftdi->u132_lock);
                 command_size = ftdi->command_next - ftdi->command_head;
                 if (command_size < COMMAND_SIZE) {
                         struct u132_target *target = &ftdi->target[ed];
@@ -1615,10 +1615,10 @@ static int ftdi_elan_edset_input(struct usb_ftdi *ftdi, u8 ed_number,
                         target->active = 1;
                         ftdi->command_next += 1;
                         ftdi_elan_kick_command_queue(ftdi);
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         return 0;
                 } else {
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         msleep(100);
                         goto wait;
                 }
@@ -1651,7 +1651,7 @@ static int ftdi_elan_edset_empty(struct usb_ftdi *ftdi, u8 ed_number,
                 return -ENODEV;
         } else {
                 int command_size;
-                down(&ftdi->u132_lock);
+                mutex_lock(&ftdi->u132_lock);
                 command_size = ftdi->command_next - ftdi->command_head;
                 if (command_size < COMMAND_SIZE) {
                         struct u132_target *target = &ftdi->target[ed];
@@ -1672,10 +1672,10 @@ static int ftdi_elan_edset_empty(struct usb_ftdi *ftdi, u8 ed_number,
                         target->active = 1;
                         ftdi->command_next += 1;
                         ftdi_elan_kick_command_queue(ftdi);
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         return 0;
                 } else {
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         msleep(100);
                         goto wait;
                 }
@@ -1708,7 +1708,7 @@ static int ftdi_elan_edset_output(struct usb_ftdi *ftdi, u8 ed_number,
                 return -ENODEV;
         } else {
                 int command_size;
-                down(&ftdi->u132_lock);
+                mutex_lock(&ftdi->u132_lock);
                 command_size = ftdi->command_next - ftdi->command_head;
                 if (command_size < COMMAND_SIZE) {
                         u8 *b;
@@ -1751,10 +1751,10 @@ static int ftdi_elan_edset_output(struct usb_ftdi *ftdi, u8 ed_number,
                         target->active = 1;
                         ftdi->command_next += 1;
                         ftdi_elan_kick_command_queue(ftdi);
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         return 0;
                 } else {
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         msleep(100);
                         goto wait;
                 }
@@ -1787,7 +1787,7 @@ static int ftdi_elan_edset_single(struct usb_ftdi *ftdi, u8 ed_number,
                 return -ENODEV;
         } else {
                 int command_size;
-                down(&ftdi->u132_lock);
+                mutex_lock(&ftdi->u132_lock);
                 command_size = ftdi->command_next - ftdi->command_head;
                 if (command_size < COMMAND_SIZE) {
                         int remaining_length = urb->transfer_buffer_length -
@@ -1816,10 +1816,10 @@ static int ftdi_elan_edset_single(struct usb_ftdi *ftdi, u8 ed_number,
                         target->active = 1;
                         ftdi->command_next += 1;
                         ftdi_elan_kick_command_queue(ftdi);
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         return 0;
                 } else {
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         msleep(100);
                         goto wait;
                 }
@@ -1849,9 +1849,9 @@ static int ftdi_elan_edset_flush(struct usb_ftdi *ftdi, u8 ed_number,
                 return -ENODEV;
         } else {
                 struct u132_target *target = &ftdi->target[ed];
-                down(&ftdi->u132_lock);
+                mutex_lock(&ftdi->u132_lock);
                 if (target->abandoning > 0) {
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         return 0;
                 } else {
                         target->abandoning = 1;
@@ -1873,13 +1873,13 @@ static int ftdi_elan_edset_flush(struct usb_ftdi *ftdi, u8 ed_number,
                                         ftdi->command_next += 1;
                                         ftdi_elan_kick_command_queue(ftdi);
                                 } else {
-                                        up(&ftdi->u132_lock);
+                                        mutex_unlock(&ftdi->u132_lock);
                                         msleep(100);
-                                        down(&ftdi->u132_lock);
+                                        mutex_lock(&ftdi->u132_lock);
                                         goto wait_1;
                                 }
                         }
-                        up(&ftdi->u132_lock);
+                        mutex_unlock(&ftdi->u132_lock);
                         return 0;
                 }
         }
@@ -2793,7 +2793,7 @@ static int ftdi_elan_probe(struct usb_interface *interface,
         init_MUTEX(&ftdi->sw_lock);
         ftdi->udev = usb_get_dev(interface_to_usbdev(interface));
         ftdi->interface = interface;
-        init_MUTEX(&ftdi->u132_lock);
+        mutex_init(&ftdi->u132_lock);
         ftdi->expected = 4;
         iface_desc = interface->cur_altsetting;
         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index e6fd024..4bcf7fb 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -66,6 +66,7 @@ static struct usb_device_id idmouse_table[] = {
 	USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, value, index, NULL, 0, 1000)
 
 MODULE_DEVICE_TABLE(usb, idmouse_table);
+static DEFINE_MUTEX(open_disc_mutex);
 
 /* structure to hold all of our device specific stuff */
 struct usb_idmouse {
@@ -80,7 +81,7 @@ struct usb_idmouse {
 
 	int open; /* if the port is open or not */
 	int present; /* if the device is not disconnected */
-	struct semaphore sem; /* locks this structure */
+	struct mutex lock; /* locks this structure */
 
 };
 
@@ -213,13 +214,17 @@ static int idmouse_open(struct inode *inode, struct file *file)
 	if (!interface)
 		return -ENODEV;
 
+	mutex_lock(&open_disc_mutex);
 	/* get the device information block from the interface */
 	dev = usb_get_intfdata(interface);
-	if (!dev)
+	if (!dev) {
+		mutex_unlock(&open_disc_mutex);
 		return -ENODEV;
+	}
 
 	/* lock this device */
-	down(&dev->sem);
+	mutex_lock(&dev->lock);
+	mutex_unlock(&open_disc_mutex);
 
 	/* check if already open */
 	if (dev->open) {
@@ -245,7 +250,7 @@ static int idmouse_open(struct inode *inode, struct file *file)
 error:
 
 	/* unlock this device */
-	up(&dev->sem);
+	mutex_unlock(&dev->lock);
 	return result;
 }
 
@@ -258,12 +263,14 @@ static int idmouse_release(struct inode *inode, struct file *file)
 	if (dev == NULL)
 		return -ENODEV;
 
+	mutex_lock(&open_disc_mutex);
 	/* lock our device */
-	down(&dev->sem);
+	mutex_lock(&dev->lock);
 
 	/* are we really open? */
 	if (dev->open <= 0) {
-		up(&dev->sem);
+		mutex_unlock(&dev->lock);
+		mutex_unlock(&open_disc_mutex);
 		return -ENODEV;
 	}
 
@@ -271,10 +278,12 @@ static int idmouse_release(struct inode *inode, struct file *file)
 
 	if (!dev->present) {
 		/* the device was unplugged before the file was released */
-		up(&dev->sem);
+		mutex_unlock(&dev->lock);
+		mutex_unlock(&open_disc_mutex);
 		idmouse_delete(dev);
 	} else {
-		up(&dev->sem);
+		mutex_unlock(&dev->lock);
+		mutex_unlock(&open_disc_mutex);
 	}
 	return 0;
 }
@@ -286,18 +295,18 @@ static ssize_t idmouse_read(struct file *file, char __user *buffer, size_t count
 	int result;
 
 	/* lock this object */
-	down(&dev->sem);
+	mutex_lock(&dev->lock);
 
 	/* verify that the device wasn't unplugged */
 	if (!dev->present) {
-		up(&dev->sem);
+		mutex_unlock(&dev->lock);
 		return -ENODEV;
 	}
 
 	result = simple_read_from_buffer(buffer, count, ppos,
 					dev->bulk_in_buffer, IMGSIZE);
 	/* unlock the device */
-	up(&dev->sem);
+	mutex_unlock(&dev->lock);
 	return result;
 }
 
@@ -320,7 +329,7 @@ static int idmouse_probe(struct usb_interface *interface,
 	if (dev == NULL)
 		return -ENOMEM;
 
-	init_MUTEX(&dev->sem);
+	mutex_init(&dev->lock);
 	dev->udev = udev;
 	dev->interface = interface;
 
@@ -372,24 +381,26 @@ static void idmouse_disconnect(struct usb_interface *interface)
 
 	/* get device structure */
 	dev = usb_get_intfdata(interface);
-	usb_set_intfdata(interface, NULL);
 
 	/* give back our minor */
 	usb_deregister_dev(interface, &idmouse_class);
 
-	/* lock it */
-	down(&dev->sem);
+	mutex_lock(&open_disc_mutex);
+	usb_set_intfdata(interface, NULL);
+	/* lock the device */
+	mutex_lock(&dev->lock);
+	mutex_unlock(&open_disc_mutex);
 
 	/* prevent device read, write and ioctl */
 	dev->present = 0;
 
 	/* if the device is opened, idmouse_release will clean this up */
 	if (!dev->open) {
-		up(&dev->sem);
+		mutex_unlock(&dev->lock);
 		idmouse_delete(dev);
 	} else {
 		/* unlock */
-		up(&dev->sem);
+		mutex_unlock(&dev->lock);
 	}
 
 	info("%s disconnected", DRIVER_DESC);
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index d372fbc..764696f 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -66,6 +66,7 @@ module_param(debug, bool, 0644);
 MODULE_PARM_DESC(debug, "debug=1 enables debugging messages");
 
 static struct usb_driver iowarrior_driver;
+static DEFINE_MUTEX(iowarrior_open_disc_lock);
 
 /*--------------*/
 /*     data     */
@@ -351,7 +352,7 @@ static ssize_t iowarrior_write(struct file *file,
 
 	mutex_lock(&dev->mutex);
 	/* verify that the device wasn't unplugged */
-	if (dev == NULL || !dev->present) {
+	if (!dev->present) {
 		retval = -ENODEV;
 		goto exit;
 	}
@@ -608,11 +609,15 @@ static int iowarrior_open(struct inode *inode, struct file *file)
 		return -ENODEV;
 	}
 
+	mutex_lock(&iowarrior_open_disc_lock);
 	dev = usb_get_intfdata(interface);
-	if (!dev)
+	if (!dev) {
+		mutex_unlock(&iowarrior_open_disc_lock);
 		return -ENODEV;
+	}
 
 	mutex_lock(&dev->mutex);
+	mutex_unlock(&iowarrior_open_disc_lock);
 
 	/* Only one process can open each device, no sharing. */
 	if (dev->opened) {
@@ -866,6 +871,7 @@ static void iowarrior_disconnect(struct usb_interface *interface)
 	int minor;
 
 	dev = usb_get_intfdata(interface);
+	mutex_lock(&iowarrior_open_disc_lock);
 	usb_set_intfdata(interface, NULL);
 
 	minor = dev->minor;
@@ -879,6 +885,7 @@ static void iowarrior_disconnect(struct usb_interface *interface)
 	dev->present = 0;
 
 	mutex_unlock(&dev->mutex);
+	mutex_unlock(&iowarrior_open_disc_lock);
 
 	if (dev->opened) {
 		/* There is a process that holds a filedescriptor to the device ,
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 561970b..aab3200 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -198,6 +198,7 @@ static struct usb_device_id tower_table [] = {
 };
 
 MODULE_DEVICE_TABLE (usb, tower_table);
+static DEFINE_MUTEX(open_disc_mutex);
 
 #define LEGO_USB_TOWER_MINOR_BASE	160
 
@@ -350,25 +351,31 @@ static int tower_open (struct inode *inode, struct file *file)
 		goto exit;
 	}
 
+	mutex_lock(&open_disc_mutex);
 	dev = usb_get_intfdata(interface);
 
 	if (!dev) {
+		mutex_unlock(&open_disc_mutex);
 		retval = -ENODEV;
 		goto exit;
 	}
 
 	/* lock this device */
 	if (down_interruptible (&dev->sem)) {
+		mutex_unlock(&open_disc_mutex);
 	        retval = -ERESTARTSYS;
 		goto exit;
 	}
 
+
 	/* allow opening only once */
 	if (dev->open_count) {
+		mutex_unlock(&open_disc_mutex);
 		retval = -EBUSY;
 		goto unlock_exit;
 	}
 	dev->open_count = 1;
+	mutex_unlock(&open_disc_mutex);
 
 	/* reset the tower */
 	result = usb_control_msg (dev->udev,
@@ -437,9 +444,10 @@ static int tower_release (struct inode *inode, struct file *file)
 	if (dev == NULL) {
 		dbg(1, "%s: object is NULL", __FUNCTION__);
 		retval = -ENODEV;
-		goto exit;
+		goto exit_nolock;
 	}
 
+	mutex_lock(&open_disc_mutex);
 	if (down_interruptible (&dev->sem)) {
 	        retval = -ERESTARTSYS;
 		goto exit;
@@ -468,6 +476,8 @@ unlock_exit:
 	up (&dev->sem);
 
 exit:
+	mutex_unlock(&open_disc_mutex);
+exit_nolock:
 	dbg(2, "%s: leave, return value %d", __FUNCTION__, retval);
 	return retval;
 }
@@ -989,6 +999,7 @@ static void tower_disconnect (struct usb_interface *interface)
 	dbg(2, "%s: enter", __FUNCTION__);
 
 	dev = usb_get_intfdata (interface);
+	mutex_lock(&open_disc_mutex);
 	usb_set_intfdata (interface, NULL);
 
 	minor = dev->minor;
@@ -997,6 +1008,7 @@ static void tower_disconnect (struct usb_interface *interface)
 	usb_deregister_dev (interface, &tower_class);
 
 	down (&dev->sem);
+	mutex_unlock(&open_disc_mutex);
 
 	/* if the device is not opened, then we clean up right now */
 	if (!dev->open_count) {
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index 88f6abe..330c18e 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -118,10 +118,7 @@ ioctl_rio(struct inode *inode, struct file *file, unsigned int cmd,
 
 	mutex_lock(&(rio->lock));
         /* Sanity check to make sure rio is connected, powered, etc */
-        if ( rio == NULL ||
-             rio->present == 0 ||
-             rio->rio_dev == NULL )
-	{
+        if (rio->present == 0 || rio->rio_dev == NULL) {
 		retval = -ENODEV;
 		goto err_out;
 	}
@@ -280,10 +277,7 @@ write_rio(struct file *file, const char __user *buffer,
 	if (intr)
 		return -EINTR;
         /* Sanity check to make sure rio is connected, powered, etc */
-        if ( rio == NULL ||
-             rio->present == 0 ||
-             rio->rio_dev == NULL )
-	{
+        if (rio->present == 0 || rio->rio_dev == NULL) {
 		mutex_unlock(&(rio->lock));
 		return -ENODEV;
 	}
@@ -369,10 +363,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
 	if (intr)
 		return -EINTR;
 	/* Sanity check to make sure rio is connected, powered, etc */
-        if ( rio == NULL ||
-             rio->present == 0 ||
-             rio->rio_dev == NULL )
-	{
+        if (rio->present == 0 || rio->rio_dev == NULL) {
 		mutex_unlock(&(rio->lock));
 		return -ENODEV;
 	}
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 7198420..20777d0 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
+#include <linux/mutex.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
 
@@ -34,6 +35,8 @@ static struct usb_device_id id_table [] = {
 };
 MODULE_DEVICE_TABLE (usb, id_table);
 
+static DEFINE_MUTEX(open_disc_mutex);
+
 
 struct usb_lcd {
 	struct usb_device *	udev;			/* init: probe_lcd */
@@ -79,12 +82,16 @@ static int lcd_open(struct inode *inode, struct file *file)
 		return -ENODEV;
 	}
 
+	mutex_lock(&open_disc_mutex);
 	dev = usb_get_intfdata(interface);
-	if (!dev)
+	if (!dev) {
+		mutex_unlock(&open_disc_mutex);
 		return -ENODEV;
+	}
 
 	/* increment our usage count for the device */
 	kref_get(&dev->kref);
+	mutex_unlock(&open_disc_mutex);
 
 	/* grab a power reference */
 	r = usb_autopm_get_interface(interface);
@@ -393,8 +400,10 @@ static void lcd_disconnect(struct usb_interface *interface)
 	struct usb_lcd *dev;
         int minor = interface->minor;
 
+	mutex_lock(&open_disc_mutex);
         dev = usb_get_intfdata(interface);
         usb_set_intfdata(interface, NULL);
+	mutex_unlock(&open_disc_mutex);
 
         /* give back our minor */
         usb_deregister_dev(interface, &lcd_class);
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 2a8e537..ddfee91 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -161,7 +161,8 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 {
 	struct usb_serial *serial = port->serial;
 	struct ark3116_private *priv = usb_get_serial_port_data(port);
-	unsigned int cflag = port->tty->termios->c_cflag;
+	struct ktermios *termios = port->tty->termios;
+	unsigned int cflag = termios->c_cflag;
 	unsigned long flags;
 	int baud;
 	int ark3116_baud;
@@ -177,11 +178,14 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 		*(port->tty->termios) = tty_std_termios;
 		port->tty->termios->c_cflag = B9600 | CS8
 					      | CREAD | HUPCL | CLOCAL;
+		termios->c_ispeed = 9600;
+		termios->c_ospeed = 9600;
 		priv->termios_initialized = 1;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	cflag = port->tty->termios->c_cflag;
+	cflag = termios->c_cflag;
+	termios->c_cflag &= ~(CMSPAR|CRTSCTS);
 
 	buf = kmalloc(1, GFP_KERNEL);
 	if (!buf) {
@@ -254,9 +258,13 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 		case 115200:
 		case 230400:
 		case 460800:
+			/* Report the resulting rate back to the caller */
+			tty_encode_baud_rate(port->tty, baud, baud);
 			break;
 		/* set 9600 as default (if given baudrate is invalid for example) */
 		default:
+			tty_encode_baud_rate(port->tty, 9600, 9600);
+		case 0:
 			baud = 9600;
 	}
 
@@ -302,6 +310,7 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 	/* TEST ARK3116_SND(154, 0xFE, 0x40, 0xFFFF, 0x0006); */
 
 	kfree(buf);
+
 	return;
 }
 
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 6b252ce..42582d4 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -272,9 +272,6 @@ static void ch341_set_termios(struct usb_serial_port *port,
 
 	dbg("ch341_set_termios()");
 
-	if (!tty || !tty->termios)
-		return;
-
 	baud_rate = tty_get_baud_rate(tty);
 
 	switch (baud_rate) {
@@ -299,6 +296,11 @@ static void ch341_set_termios(struct usb_serial_port *port,
 	 * (cflag & PARENB) : parity {NONE, EVEN, ODD}
 	 * (cflag & CSTOPB) : stop bits [1, 2]
 	 */
+
+	 /* Copy back the old hardware settings */
+	 tty_termios_copy_hw(tty->termios, old_termios);
+	 /* And re-encode with the new baud */
+	 tty_encode_baud_rate(tty, baud_rate, baud_rate);
 }
 
 static struct usb_driver ch341_driver = {
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 9386e21..0362654 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -164,6 +164,7 @@ static int usb_console_setup(struct console *co, char *options)
 	}
 
 	if (serial->type->set_termios) {
+		struct ktermios dummy;
 		/* build up a fake tty structure so that the open call has something
 		 * to look at to get the cflag value */
 		tty = kzalloc(sizeof(*tty), GFP_KERNEL);
@@ -177,12 +178,13 @@ static int usb_console_setup(struct console *co, char *options)
 			kfree (tty);
 			return -ENOMEM;
 		}
+		memset(&dummy, 0, sizeof(struct ktermios));
 		termios->c_cflag = cflag;
 		tty->termios = termios;
 		port->tty = tty;
 
 		/* set up the initial termios settings */
-		serial->type->set_termios(port, NULL);
+		serial->type->set_termios(port, &dummy);
 		port->tty = NULL;
 		kfree (termios);
 		kfree (tty);
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index eb7df18..3a83cb4 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -361,7 +361,6 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 		dbg("%s - no tty structures", __FUNCTION__);
 		return;
 	}
-	cflag = port->tty->termios->c_cflag;
 
 	cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
 	/* Convert to baudrate */
@@ -369,40 +368,9 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 		baud = BAUD_RATE_GEN_FREQ / baud;
 
 	dbg("%s - baud rate = %d", __FUNCTION__, baud);
-	cflag &= ~CBAUD;
-	switch (baud) {
-		/*
-		 * The baud rates which are commented out below
-		 * appear to be supported by the device
-		 * but are non-standard
-		 */
-		case 600:	cflag |= B600;		break;
-		case 1200:	cflag |= B1200;		break;
-		case 1800:	cflag |= B1800;		break;
-		case 2400:	cflag |= B2400;		break;
-		case 4800:	cflag |= B4800;		break;
-		/*case 7200:	cflag |= B7200;		break;*/
-		case 9600:	cflag |= B9600;		break;
-		/*case 14400:	cflag |= B14400;	break;*/
-		case 19200:	cflag |= B19200;	break;
-		/*case 28800:	cflag |= B28800;	break;*/
-		case 38400:	cflag |= B38400;	break;
-		/*case 55854:	cflag |= B55054;	break;*/
-		case 57600:	cflag |= B57600;	break;
-		case 115200:	cflag |= B115200;	break;
-		/*case 127117:	cflag |= B127117;	break;*/
-		case 230400:	cflag |= B230400;	break;
-		case 460800:	cflag |= B460800;	break;
-		case 921600:	cflag |= B921600;	break;
-		/*case 3686400:	cflag |= B3686400;	break;*/
-		default:
-			dbg("%s - Baud rate is not supported, "
-					"using 9600 baud", __FUNCTION__);
-			cflag |= B9600;
-			cp2101_set_config_single(port, CP2101_BAUDRATE,
-					(BAUD_RATE_GEN_FREQ/9600));
-			break;
-	}
+
+	tty_encode_baud_rate(port->tty, baud, baud);
+	cflag = port->tty->termios->c_cflag;
 
 	cp2101_get_config(port, CP2101_BITS, &bits, 2);
 	cflag &= ~CSIZE;
@@ -516,7 +484,7 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 static void cp2101_set_termios (struct usb_serial_port *port,
 		struct ktermios *old_termios)
 {
-	unsigned int cflag, old_cflag=0;
+	unsigned int cflag, old_cflag;
 	int baud=0, bits;
 	unsigned int modem_ctl[4];
 
@@ -526,6 +494,8 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 		dbg("%s - no tty structures", __FUNCTION__);
 		return;
 	}
+	port->tty->termios->c_cflag &= ~CMSPAR;
+
 	cflag = port->tty->termios->c_cflag;
 	old_cflag = old_termios->c_cflag;
 	baud = tty_get_baud_rate(port->tty);
@@ -563,11 +533,15 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 			dbg("%s - Setting baud rate to %d baud", __FUNCTION__,
 					baud);
 			if (cp2101_set_config_single(port, CP2101_BAUDRATE,
-						(BAUD_RATE_GEN_FREQ / baud)))
+						(BAUD_RATE_GEN_FREQ / baud))) {
 				dev_err(&port->dev, "Baud rate requested not "
 						"supported by device\n");
+				baud = tty_termios_baud_rate(old_termios);
+			}
 		}
 	}
+	/* Report back the resulting baud rate */
+	tty_encode_baud_rate(port->tty, baud, baud);
 
 	/* If the number of data bits is to be updated */
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index dab2e66..ae410c4 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -973,6 +973,8 @@ static void digi_set_termios(struct usb_serial_port *port,
 		}
 	}
 	/* set parity */
+	tty->termios->c_cflag &= ~CMSPAR;
+
 	if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) {
 		if (cflag&PARENB) {
 			if (cflag&PARODD)
@@ -1054,15 +1056,15 @@ static void digi_set_termios(struct usb_serial_port *port,
 	}
 
 	/* set output flow control */
-	if ((iflag&IXON) != (old_iflag&IXON)
-	    || (cflag&CRTSCTS) != (old_cflag&CRTSCTS)) {
+	if ((iflag & IXON) != (old_iflag & IXON)
+	    || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
 		arg = 0;
-		if (iflag&IXON)
+		if (iflag & IXON)
 			arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
 		else
 			arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
 
-		if (cflag&CRTSCTS) {
+		if (cflag & CRTSCTS) {
 			arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
 		} else {
 			arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
@@ -1076,8 +1078,8 @@ static void digi_set_termios(struct usb_serial_port *port,
 	}
 
 	/* set receive enable/disable */
-	if ((cflag&CREAD) != (old_cflag&CREAD)) {
-		if (cflag&CREAD)
+	if ((cflag & CREAD) != (old_cflag & CREAD)) {
+		if (cflag & CREAD)
 			arg = DIGI_ENABLE;
 		else
 			arg = DIGI_DISABLE;
@@ -1089,7 +1091,7 @@ static void digi_set_termios(struct usb_serial_port *port,
 	}
 	if ((ret = digi_write_oob_command(port, buf, i, 1)) != 0)
 		dbg("digi_set_termios: write oob failed, ret=%d", ret);
-
+	tty_encode_baud_rate(tty, baud, baud);
 }
 
 
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 050fcc9..a5c8e1e 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -449,14 +449,9 @@ static int empeg_ioctl (struct usb_serial_port *port, struct file * file, unsign
 
 static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
 {
-
+	struct ktermios *termios = port->tty->termios;
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	if ((!port->tty) || (!port->tty->termios)) {
-		dbg("%s - no tty structures", __FUNCTION__);
-		return;
-	}
-
 	/*
          * The empeg-car player wants these particular tty settings.
          * You could, for example, change the baud rate, however the
@@ -466,7 +461,7 @@ static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *ol
          *
          * The default requirements for this device are:
          */
-	port->tty->termios->c_iflag
+	termios->c_iflag
 		&= ~(IGNBRK	/* disable ignore break */
 		| BRKINT	/* disable break causes interrupt */
 		| PARMRK	/* disable mark parity errors */
@@ -476,24 +471,23 @@ static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *ol
 		| ICRNL		/* disable translate CR to NL */
 		| IXON);	/* disable enable XON/XOFF flow control */
 
-	port->tty->termios->c_oflag
+	termios->c_oflag
 		&= ~OPOST;	/* disable postprocess output characters */
 
-	port->tty->termios->c_lflag
+	termios->c_lflag
 		&= ~(ECHO	/* disable echo input characters */
 		| ECHONL	/* disable echo new line */
 		| ICANON	/* disable erase, kill, werase, and rprnt special characters */
 		| ISIG		/* disable interrupt, quit, and suspend special characters */
 		| IEXTEN);	/* disable non-POSIX special characters */
 
-	port->tty->termios->c_cflag
+	termios->c_cflag
 		&= ~(CSIZE	/* no size */
 		| PARENB	/* disable parity bit */
 		| CBAUD);	/* clear current baud rate */
 
-	port->tty->termios->c_cflag
-		|= (CS8		/* character size 8 bits */
-		| B115200);	/* baud rate 115200 */
+	termios->c_cflag
+		|= CS8;		/* character size 8 bits */
 
 	/*
 	 * Force low_latency on; otherwise the pushes are scheduled;
@@ -501,8 +495,7 @@ static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *ol
 	 * on the floor.  We don't want to drop bytes on the floor. :)
 	 */
 	port->tty->low_latency = 1;
-
-	return;
+	tty_encode_baud_rate(port->tty, 115200, 115200);
 }
 
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8a8a6b9..c40e77d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -294,7 +294,7 @@ struct ftdi_private {
 
 	__u16 interface;	/* FT2232C port interface (0 for FT232/245) */
 
-	int force_baud;		/* if non-zero, force the baud rate to this value */
+	speed_t force_baud;	/* if non-zero, force the baud rate to this value */
 	int force_rtscts;	/* if non-zero, force RTS-CTS to always be enabled */
 
 	spinlock_t tx_lock;	/* spinlock for transmit state */
@@ -878,6 +878,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
 		if (div_value == 0) {
 			dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__,  baud);
 			div_value = ftdi_sio_b9600;
+			baud = 9600;
 			div_okay = 0;
 		}
 		break;
@@ -886,6 +887,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
 			div_value = ftdi_232am_baud_to_divisor(baud);
 		} else {
 	                dbg("%s - Baud rate too high!", __FUNCTION__);
+			baud = 9600;
 			div_value = ftdi_232am_baud_to_divisor(9600);
 			div_okay = 0;
 		}
@@ -899,6 +901,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
 	                dbg("%s - Baud rate too high!", __FUNCTION__);
 			div_value = ftdi_232bm_baud_to_divisor(9600);
 			div_okay = 0;
+			baud = 9600;
 		}
 		break;
 	} /* priv->chip_type */
@@ -909,6 +912,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
 			ftdi_chip_name[priv->chip_type]);
 	}
 
+	tty_encode_baud_rate(port->tty, baud, baud);
 	return(div_value);
 }
 
@@ -1263,7 +1267,7 @@ static void ftdi_USB_UIRT_setup (struct ftdi_private *priv)
 
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 77;
-	priv->force_baud = B38400;
+	priv->force_baud = 38400;
 } /* ftdi_USB_UIRT_setup */
 
 /* Setup for the HE-TIRA1 device, which requires hardwired
@@ -1274,7 +1278,7 @@ static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv)
 
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 240;
-	priv->force_baud = B38400;
+	priv->force_baud = 38400;
 	priv->force_rtscts = 1;
 } /* ftdi_HE_TIRA1_setup */
 
@@ -1363,7 +1367,7 @@ static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
 
 	/* ftdi_set_termios  will send usb control messages */
 	if (port->tty)
-		ftdi_set_termios(port, NULL);
+		ftdi_set_termios(port, port->tty->termios);
 
 	/* FIXME: Flow control might be enabled, so it should be checked -
 	   we have no control of defaults! */
@@ -1933,32 +1937,33 @@ static void ftdi_break_ctl( struct usb_serial_port *port, int break_state )
 static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
 { /* ftdi_termios */
 	struct usb_device *dev = port->serial->dev;
-	unsigned int cflag = port->tty->termios->c_cflag;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct ktermios *termios = port->tty->termios;
+	unsigned int cflag = termios->c_cflag;
 	__u16 urb_value; /* will hold the new flags */
 	char buf[1]; /* Perhaps I should dynamically alloc this? */
 
 	// Added for xon/xoff support
-	unsigned int iflag = port->tty->termios->c_iflag;
+	unsigned int iflag = termios->c_iflag;
 	unsigned char vstop;
 	unsigned char vstart;
 
 	dbg("%s", __FUNCTION__);
 
 	/* Force baud rate if this device requires it, unless it is set to B0. */
-	if (priv->force_baud && ((port->tty->termios->c_cflag & CBAUD) != B0)) {
+	if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
 		dbg("%s: forcing baud rate for this device", __FUNCTION__);
-		port->tty->termios->c_cflag &= ~CBAUD;
-		port->tty->termios->c_cflag |= priv->force_baud;
+		tty_encode_baud_rate(port->tty, priv->force_baud,
+					priv->force_baud);
 	}
 
 	/* Force RTS-CTS if this device requires it. */
 	if (priv->force_rtscts) {
 		dbg("%s: forcing rtscts for this device", __FUNCTION__);
-		port->tty->termios->c_cflag |= CRTSCTS;
+		termios->c_cflag |= CRTSCTS;
 	}
 
-	cflag = port->tty->termios->c_cflag;
+	cflag = termios->c_cflag;
 
 	/* FIXME -For this cut I don't care if the line is really changing or
 	   not  - so just do the change regardless  - should be able to
@@ -1969,6 +1974,8 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old
 
 	/* Set number of data bits, parity, stop bits */
 
+	termios->c_cflag &= ~CMSPAR;
+
 	urb_value = 0;
 	urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 :
 		      FTDI_SIO_SET_DATA_STOP_BITS_1);
@@ -2048,8 +2055,8 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old
 			// Set the vstart and vstop -- could have been done up above where
 			// a lot of other dereferencing is done but that would be very
 			// inefficient as vstart and vstop are not always needed
-			vstart=port->tty->termios->c_cc[VSTART];
-			vstop=port->tty->termios->c_cc[VSTOP];
+			vstart = termios->c_cc[VSTART];
+			vstop = termios->c_cc[VSTOP];
 			urb_value=(vstop << 8) | (vstart);
 
 			if (usb_control_msg(dev,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 88a2c7d..9eb4a65 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -208,14 +208,15 @@ int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char *
 
 	/* only do something if we have a bulk out endpoint */
 	if (serial->num_bulk_out) {
-		spin_lock_bh(&port->lock);
+		unsigned long flags;
+		spin_lock_irqsave(&port->lock, flags);
 		if (port->write_urb_busy) {
-			spin_unlock_bh(&port->lock);
+			spin_unlock_irqrestore(&port->lock, flags);
 			dbg("%s - already writing", __FUNCTION__);
 			return 0;
 		}
 		port->write_urb_busy = 1;
-		spin_unlock_bh(&port->lock);
+		spin_unlock_irqrestore(&port->lock, flags);
 
 		count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
 
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 8dd3abc..a5d2e11 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1503,22 +1503,16 @@ static void edge_unthrottle (struct usb_serial_port *port)
  *****************************************************************************/
 static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
 {
+	/* FIXME: This function appears unused ?? */
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct tty_struct *tty = port->tty;
 	unsigned int cflag;
 
-	if (!port->tty || !port->tty->termios) {
-		dbg ("%s - no tty or termios", __FUNCTION__);
-		return;
-	}
-
 	cflag = tty->termios->c_cflag;
 	dbg("%s - clfag %08x iflag %08x", __FUNCTION__, 
 	    tty->termios->c_cflag, tty->termios->c_iflag);
-	if (old_termios) {
-		dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
-		    old_termios->c_cflag, old_termios->c_iflag);
-	}
+	dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
+	    old_termios->c_cflag, old_termios->c_iflag);
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
@@ -2653,7 +2647,11 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi
 
 	dbg("%s - baud rate = %d", __FUNCTION__, baud);
 	status = send_cmd_write_baud_rate (edge_port, baud);
-
+	if (status == -1) {
+		/* Speed change was not possible - put back the old speed */
+		baud = tty_termios_baud_rate(old_termios);
+		tty_encode_baud_rate(tty, baud, baud);
+	}
 	return;
 }
 
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 5ab6a0c..6b803ab 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -504,11 +504,6 @@ static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_t
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	if ((!port->tty) || (!port->tty->termios)) {
-		dbg("%s - no tty structures", __FUNCTION__);
-		return;
-	}
-
 	baud = tty_get_baud_rate(port->tty);
 
 	/*
@@ -531,8 +526,6 @@ static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_t
 		default:
 			ir_baud = SPEED_9600;
 			baud = 9600;
-			/* And once the new tty stuff is all done we need to
-			   call back to correct the baud bits */
 	}
 
 	if (xbof == -1)
@@ -562,6 +555,10 @@ static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_t
 	result = usb_submit_urb (port->write_urb, GFP_KERNEL);
 	if (result)
 		dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result);
+
+	/* Only speed changes are supported */
+	tty_termios_copy_hw(port->tty->termios, old_termios);
+	tty_encode_baud_rate(port->tty, baud, baud);
 }
 
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index f2a6fce..6bfdba6 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -278,29 +278,35 @@ static void keyspan_set_termios (struct usb_serial_port *port,
 	struct keyspan_port_private 	*p_priv;
 	const struct keyspan_device_details	*d_details;
 	unsigned int 			cflag;
+	struct tty_struct		*tty = port->tty;
 
 	dbg("%s", __FUNCTION__); 
 
 	p_priv = usb_get_serial_port_data(port);
 	d_details = p_priv->device_details;
-	cflag = port->tty->termios->c_cflag;
+	cflag = tty->termios->c_cflag;
 	device_port = port->number - port->serial->minor;
 
 	/* Baud rate calculation takes baud rate as an integer
 	   so other rates can be generated if desired. */
-	baud_rate = tty_get_baud_rate(port->tty);
+	baud_rate = tty_get_baud_rate(tty);
 	/* If no match or invalid, don't change */		
-	if (baud_rate >= 0
-	    && d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
+	if (d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
 				NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
 		/* FIXME - more to do here to ensure rate changes cleanly */
+		/* FIXME - calcuate exact rate from divisor ? */
 		p_priv->baud = baud_rate;
-	}
+	} else
+		baud_rate = tty_termios_baud_rate(old_termios);
 
+	tty_encode_baud_rate(tty, baud_rate, baud_rate);
 	/* set CTS/RTS handshake etc. */
 	p_priv->cflag = cflag;
 	p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none;
 
+	/* Mark/Space not supported */
+	tty->termios->c_cflag &= ~CMSPAR;
+
 	keyspan_send_setup(port, 0);
 }
 
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6f22419..aee4502 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -616,8 +616,9 @@ static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old
 		case 1200:
 			urb_val = SUSBCR_SBR_1200;
 			break;
-		case 9600:
 		default:
+			speed = 9600;
+		case 9600:
 			urb_val = SUSBCR_SBR_9600;
 			break;
 	}
@@ -641,6 +642,8 @@ static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old
 		urb_val |= SUSBCR_SPASB_NoParity;
 		strcat(settings, "No Parity");
 	}
+	port->tty->termios->c_cflag &= ~CMSPAR;
+	tty_encode_baud_rate(port->tty, speed, speed);
 
 	result = usb_control_msg( port->serial->dev,
 				  usb_rcvctrlpipe(port->serial->dev, 0 ),
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index f76480f..a5ced7e 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1977,11 +1977,6 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port,
 
 	tty = mos7840_port->port->tty;
 
-	if ((!tty) || (!tty->termios)) {
-		dbg("%s - no tty structures", __FUNCTION__);
-		return;
-	}
-
 	dbg("%s", "Entering .......... \n");
 
 	lData = LCR_BITS_8;
@@ -2151,11 +2146,6 @@ static void mos7840_set_termios(struct usb_serial_port *port,
 
 	tty = port->tty;
 
-	if (!port->tty || !port->tty->termios) {
-		dbg("%s - no tty or termios", __FUNCTION__);
-		return;
-	}
-
 	if (!mos7840_port->open) {
 		dbg("%s - port not opened", __FUNCTION__);
 		return;
@@ -2165,19 +2155,10 @@ static void mos7840_set_termios(struct usb_serial_port *port,
 
 	cflag = tty->termios->c_cflag;
 
-	if (!cflag) {
-		dbg("%s %s\n", __FUNCTION__, "cflag is NULL");
-		return;
-	}
-
 	dbg("%s - clfag %08x iflag %08x", __FUNCTION__,
 	    tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
-
-	if (old_termios) {
-		dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
-		    old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
-	}
-
+	dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
+	    old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
 	/* change the port settings to the new ones specified */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a18659e..4590124 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -172,6 +172,8 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2110) }, /* Novatel Merlin ES620 / Merlin ES720 / Ovation U720 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4100) }, /* Novatel U727 */
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4400) }, /* Novatel MC950 */
 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8114) },	/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8115) },	/* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8116) },	/* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
@@ -311,7 +313,8 @@ static void option_set_termios(struct usb_serial_port *port,
 			struct ktermios *old_termios)
 {
 	dbg("%s", __FUNCTION__);
-
+	/* Doesn't support option setting */
+	tty_termios_copy_hw(port->tty->termios, old_termios);
 	option_send_setup(port);
 }
 
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1da57fd..2cd3f1d 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -56,6 +56,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
+	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
 	{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
 	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
@@ -470,16 +471,13 @@ static void pl2303_set_termios(struct usb_serial_port *port,
 
 	dbg("%s -  port %d", __FUNCTION__, port->number);
 
-	if ((!port->tty) || (!port->tty->termios)) {
-		dbg("%s - no tty structures", __FUNCTION__);
-		return;
-	}
-
 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->termios_initialized) {
 		*(port->tty->termios) = tty_std_termios;
 		port->tty->termios->c_cflag = B9600 | CS8 | CREAD |
 					      HUPCL | CLOCAL;
+		port->tty->termios->c_ispeed = 9600;
+		port->tty->termios->c_ospeed = 9600;
 		priv->termios_initialized = 1;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -596,6 +594,10 @@ static void pl2303_set_termios(struct usb_serial_port *port,
 		dbg ("0x40:0x1:0x0:0x0  %d", i);
 	}
 
+	/* FIXME: Need to read back resulting baud rate */
+	if (baud)
+		tty_encode_baud_rate(port->tty, baud, baud);
+
 	kfree(buf);
 }
 
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index c39bace..ed603e3 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -20,6 +20,7 @@
 
 #define IODATA_VENDOR_ID	0x04bb
 #define IODATA_PRODUCT_ID	0x0a03
+#define IODATA_PRODUCT_ID_RSAQ5	0x0a0e
 
 #define ELCOM_VENDOR_ID		0x056e
 #define ELCOM_PRODUCT_ID	0x5003
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 959b3e4..833f6e1 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -224,7 +224,7 @@ static void sierra_set_termios(struct usb_serial_port *port,
 			struct ktermios *old_termios)
 {
 	dbg("%s", __FUNCTION__);
-
+	tty_termios_copy_hw(port->tty->termios, old_termios);
 	sierra_send_setup(port);
 }
 
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4b1bd7d..497e29a 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -429,6 +429,8 @@ static void serial_set_termios (struct tty_struct *tty, struct ktermios * old)
 	/* pass on to the driver specific version of this function if it is available */
 	if (port->serial->type->set_termios)
 		port->serial->type->set_termios(port, old);
+	else
+		tty_termios_copy_hw(tty->termios, old);
 }
 
 static void serial_break (struct tty_struct *tty, int break_state)
@@ -1121,7 +1123,9 @@ int usb_serial_resume(struct usb_interface *intf)
 {
 	struct usb_serial *serial = usb_get_intfdata(intf);
 
-	return serial->type->resume(serial);
+	if (serial->type->resume)
+		return serial->type->resume(serial);
+	return 0;
 }
 EXPORT_SYMBOL(usb_serial_resume);
 
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index cc8b44c..ee5dd8b 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -885,16 +885,7 @@ static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, un
 static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	dbg("%s -port %d", __FUNCTION__, port->number);
-
-	if ((!port->tty) || (!port->tty->termios)) {
-		dbg("%s - no tty structures", __FUNCTION__);
-		goto exit;
-	}
-	
 	firm_setup_port(port);
-
-exit:
-	return;
 }
 
 
@@ -1244,6 +1235,8 @@ static int firm_setup_port(struct usb_serial_port *port) {
 	port_settings.baud = tty_get_baud_rate(port->tty);
 	dbg("%s - baud rate = %d", __FUNCTION__, port_settings.baud);
 
+	/* fixme: should set validated settings */
+	tty_encode_baud_rate(port->tty, port_settings.baud, port_settings.baud);
 	/* handle any settings that aren't specified in the tty structure */
 	port_settings.lloop = 0;
 	
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index fe2c4cd..7e53333 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -48,7 +48,6 @@ config USB_STORAGE_FREECOM
 config USB_STORAGE_ISD200
 	bool "ISD-200 USB/ATA Bridge support"
 	depends on USB_STORAGE
-	depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE
 	---help---
 	  Say Y here if you want to use USB Mass Store devices based
 	  on the In-Systems Design ISD-200 USB/ATA bridge.
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 93a7724..49ba6c0 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -977,6 +977,109 @@ static int isd200_manual_enum(struct us_data *us)
 	return(retStatus);
 }
 
+/*
+ *	We are the last non IDE user of the legacy IDE ident structures
+ *	and we thus want to keep a private copy of this function so the
+ *	driver can be used without the obsolete drivers/ide layer
+ */
+
+static void isd200_fix_driveid (struct hd_driveid *id)
+{
+#ifndef __LITTLE_ENDIAN
+# ifdef __BIG_ENDIAN
+	int i;
+	u16 *stringcast;
+
+	id->config         = __le16_to_cpu(id->config);
+	id->cyls           = __le16_to_cpu(id->cyls);
+	id->reserved2      = __le16_to_cpu(id->reserved2);
+	id->heads          = __le16_to_cpu(id->heads);
+	id->track_bytes    = __le16_to_cpu(id->track_bytes);
+	id->sector_bytes   = __le16_to_cpu(id->sector_bytes);
+	id->sectors        = __le16_to_cpu(id->sectors);
+	id->vendor0        = __le16_to_cpu(id->vendor0);
+	id->vendor1        = __le16_to_cpu(id->vendor1);
+	id->vendor2        = __le16_to_cpu(id->vendor2);
+	stringcast = (u16 *)&id->serial_no[0];
+	for (i = 0; i < (20/2); i++)
+		stringcast[i] = __le16_to_cpu(stringcast[i]);
+	id->buf_type       = __le16_to_cpu(id->buf_type);
+	id->buf_size       = __le16_to_cpu(id->buf_size);
+	id->ecc_bytes      = __le16_to_cpu(id->ecc_bytes);
+	stringcast = (u16 *)&id->fw_rev[0];
+	for (i = 0; i < (8/2); i++)
+		stringcast[i] = __le16_to_cpu(stringcast[i]);
+	stringcast = (u16 *)&id->model[0];
+	for (i = 0; i < (40/2); i++)
+		stringcast[i] = __le16_to_cpu(stringcast[i]);
+	id->dword_io       = __le16_to_cpu(id->dword_io);
+	id->reserved50     = __le16_to_cpu(id->reserved50);
+	id->field_valid    = __le16_to_cpu(id->field_valid);
+	id->cur_cyls       = __le16_to_cpu(id->cur_cyls);
+	id->cur_heads      = __le16_to_cpu(id->cur_heads);
+	id->cur_sectors    = __le16_to_cpu(id->cur_sectors);
+	id->cur_capacity0  = __le16_to_cpu(id->cur_capacity0);
+	id->cur_capacity1  = __le16_to_cpu(id->cur_capacity1);
+	id->lba_capacity   = __le32_to_cpu(id->lba_capacity);
+	id->dma_1word      = __le16_to_cpu(id->dma_1word);
+	id->dma_mword      = __le16_to_cpu(id->dma_mword);
+	id->eide_pio_modes = __le16_to_cpu(id->eide_pio_modes);
+	id->eide_dma_min   = __le16_to_cpu(id->eide_dma_min);
+	id->eide_dma_time  = __le16_to_cpu(id->eide_dma_time);
+	id->eide_pio       = __le16_to_cpu(id->eide_pio);
+	id->eide_pio_iordy = __le16_to_cpu(id->eide_pio_iordy);
+	for (i = 0; i < 2; ++i)
+		id->words69_70[i] = __le16_to_cpu(id->words69_70[i]);
+	for (i = 0; i < 4; ++i)
+		id->words71_74[i] = __le16_to_cpu(id->words71_74[i]);
+	id->queue_depth    = __le16_to_cpu(id->queue_depth);
+	for (i = 0; i < 4; ++i)
+		id->words76_79[i] = __le16_to_cpu(id->words76_79[i]);
+	id->major_rev_num  = __le16_to_cpu(id->major_rev_num);
+	id->minor_rev_num  = __le16_to_cpu(id->minor_rev_num);
+	id->command_set_1  = __le16_to_cpu(id->command_set_1);
+	id->command_set_2  = __le16_to_cpu(id->command_set_2);
+	id->cfsse          = __le16_to_cpu(id->cfsse);
+	id->cfs_enable_1   = __le16_to_cpu(id->cfs_enable_1);
+	id->cfs_enable_2   = __le16_to_cpu(id->cfs_enable_2);
+	id->csf_default    = __le16_to_cpu(id->csf_default);
+	id->dma_ultra      = __le16_to_cpu(id->dma_ultra);
+	id->trseuc         = __le16_to_cpu(id->trseuc);
+	id->trsEuc         = __le16_to_cpu(id->trsEuc);
+	id->CurAPMvalues   = __le16_to_cpu(id->CurAPMvalues);
+	id->mprc           = __le16_to_cpu(id->mprc);
+	id->hw_config      = __le16_to_cpu(id->hw_config);
+	id->acoustic       = __le16_to_cpu(id->acoustic);
+	id->msrqs          = __le16_to_cpu(id->msrqs);
+	id->sxfert         = __le16_to_cpu(id->sxfert);
+	id->sal            = __le16_to_cpu(id->sal);
+	id->spg            = __le32_to_cpu(id->spg);
+	id->lba_capacity_2 = __le64_to_cpu(id->lba_capacity_2);
+	for (i = 0; i < 22; i++)
+		id->words104_125[i]   = __le16_to_cpu(id->words104_125[i]);
+	id->last_lun       = __le16_to_cpu(id->last_lun);
+	id->word127        = __le16_to_cpu(id->word127);
+	id->dlf            = __le16_to_cpu(id->dlf);
+	id->csfo           = __le16_to_cpu(id->csfo);
+	for (i = 0; i < 26; i++)
+		id->words130_155[i] = __le16_to_cpu(id->words130_155[i]);
+	id->word156        = __le16_to_cpu(id->word156);
+	for (i = 0; i < 3; i++)
+		id->words157_159[i] = __le16_to_cpu(id->words157_159[i]);
+	id->cfa_power      = __le16_to_cpu(id->cfa_power);
+	for (i = 0; i < 14; i++)
+		id->words161_175[i] = __le16_to_cpu(id->words161_175[i]);
+	for (i = 0; i < 31; i++)
+		id->words176_205[i] = __le16_to_cpu(id->words176_205[i]);
+	for (i = 0; i < 48; i++)
+		id->words206_254[i] = __le16_to_cpu(id->words206_254[i]);
+	id->integrity_word  = __le16_to_cpu(id->integrity_word);
+# else
+#  error "Please fix <asm/byteorder.h>"
+# endif
+#endif
+}
+
 
 /**************************************************************************
  * isd200_get_inquiry_data
@@ -1018,7 +1121,7 @@ static int isd200_get_inquiry_data( struct us_data *us )
 				int i;
 				__be16 *src;
 				__u16 *dest;
-				ide_fix_driveid(id);
+				isd200_fix_driveid(id);
 
 				US_DEBUGP("   Identify Data Structure:\n");
 				US_DEBUGP("      config = 0x%x\n", id->config);