diff options
author | Donald Skidmore <donald.c.skidmore@intel.com> | 2008-11-21 05:11:42 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2008-11-21 05:11:42 (GMT) |
commit | c4900be053d376dfe4f603d000aa5e4c60745dec (patch) | |
tree | f5658e8d4f2345e0f15346020fe3aeb2adb48905 | |
parent | 859ee3c43812051e21816c6d6d4cc04fb7ce9b2e (diff) | |
download | linux-fsl-qoriq-c4900be053d376dfe4f603d000aa5e4c60745dec.tar.xz |
ixgbe: add SFP+ driver support
This patch adds support for SFP+ PHY in the following device ID's (10DB,
10F1, 10E1). These SFP+ PHY's are accessed via an I2C interface so the
patch also includes functions to support this.
Another feature of note is that the PHY is pluggable and some
rearchitecting was needed to support this.
Signed-off-by: Donald Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | drivers/net/ixgbe/ixgbe.h | 5 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_82598.c | 160 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 94 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 258 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.h | 18 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 22 |
6 files changed, 550 insertions, 7 deletions
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index 796f189..9509aee 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -311,12 +311,15 @@ struct ixgbe_adapter { unsigned long link_check_timeout; struct work_struct watchdog_task; + struct work_struct sfp_task; + struct timer_list sfp_timer; }; enum ixbge_state_t { __IXGBE_TESTING, __IXGBE_RESETTING, - __IXGBE_DOWN + __IXGBE_DOWN, + __IXGBE_SFP_MODULE_NOT_FOUND }; enum ixgbe_boards { diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index c2cdb04..7e09dab 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -46,6 +46,8 @@ static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg, bool autoneg_wait_to_complete); +static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data); /** */ @@ -53,6 +55,8 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) { struct ixgbe_mac_info *mac = &hw->mac; struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u16 list_offset, data_offset; /* Call PHY identify routine to get the phy type */ ixgbe_identify_phy_generic(hw); @@ -64,6 +68,27 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) phy->ops.get_firmware_version = &ixgbe_get_phy_firmware_version_tnx; break; + case ixgbe_phy_nl: + phy->ops.reset = &ixgbe_reset_phy_nl; + + /* Call SFP+ identify routine to get the SFP+ module type */ + ret_val = phy->ops.identify_sfp(hw); + if (ret_val != 0) + goto out; + else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) { + ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + + /* Check to see if SFP+ module is supported */ + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, + &list_offset, + &data_offset); + if (ret_val != 0) { + ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + break; default: break; } @@ -82,7 +107,8 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES; mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES; - return 0; +out: + return ret_val; } /** @@ -191,7 +217,10 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) case IXGBE_DEV_ID_82598AF_SINGLE_PORT: case IXGBE_DEV_ID_82598EB_CX4: case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: + case IXGBE_DEV_ID_82598_DA_DUAL_PORT: + case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: case IXGBE_DEV_ID_82598EB_XF_LR: + case IXGBE_DEV_ID_82598EB_SFP_LOM: media_type = ixgbe_media_type_fiber; break; case IXGBE_DEV_ID_82598AT: @@ -399,6 +428,46 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, { u32 links_reg; u32 i; + u16 link_reg, adapt_comp_reg; + + /* + * SERDES PHY requires us to read link status from register 0xC79F. + * Bit 0 set indicates link is up/ready; clear indicates link down. + * 0xC00C is read to check that the XAUI lanes are active. Bit 0 + * clear indicates active; set indicates inactive. + */ + if (hw->phy.type == ixgbe_phy_nl) { + hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); + hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); + hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV, + &adapt_comp_reg); + if (link_up_wait_to_complete) { + for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { + if ((link_reg & 1) && + ((adapt_comp_reg & 1) == 0)) { + *link_up = true; + break; + } else { + *link_up = false; + } + msleep(100); + hw->phy.ops.read_reg(hw, 0xC79F, + IXGBE_TWINAX_DEV, + &link_reg); + hw->phy.ops.read_reg(hw, 0xC00C, + IXGBE_TWINAX_DEV, + &adapt_comp_reg); + } + } else { + if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0)) + *link_up = true; + else + *link_up = false; + } + + if (*link_up == false) + goto out; + } links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); if (link_up_wait_to_complete) { @@ -424,6 +493,7 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, else *speed = IXGBE_LINK_SPEED_1GB_FULL; +out: return 0; } @@ -859,6 +929,69 @@ s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) } /** + * ixgbe_read_i2c_eeprom_82598 - Read 8 bit EEPROM word of an SFP+ module + * over I2C interface through an intermediate phy. + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data) +{ + s32 status = 0; + u16 sfp_addr = 0; + u16 sfp_data = 0; + u16 sfp_stat = 0; + u32 i; + + if (hw->phy.type == ixgbe_phy_nl) { + /* + * phy SDA/SCL registers are at addresses 0xC30A to + * 0xC30D. These registers are used to talk to the SFP+ + * module's EEPROM through the SDA/SCL (I2C) interface. + */ + sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset; + sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); + hw->phy.ops.write_reg(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + sfp_addr); + + /* Poll status */ + for (i = 0; i < 100; i++) { + hw->phy.ops.read_reg(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &sfp_stat); + sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK; + if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS) + break; + msleep(10); + } + + if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) { + hw_dbg(hw, "EEPROM read did not pass.\n"); + status = IXGBE_ERR_SFP_NOT_PRESENT; + goto out; + } + + /* Read data */ + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data); + + *eeprom_data = (u8)(sfp_data >> 8); + } else { + status = IXGBE_ERR_PHY; + goto out; + } + +out: + return status; +} + +/** * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type * @hw: pointer to hardware structure * @@ -873,8 +1006,12 @@ s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; break; + case IXGBE_DEV_ID_82598_DA_DUAL_PORT: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; case IXGBE_DEV_ID_82598AF_DUAL_PORT: case IXGBE_DEV_ID_82598AF_SINGLE_PORT: + case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; break; case IXGBE_DEV_ID_82598EB_XF_LR: @@ -884,6 +1021,24 @@ s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_T | IXGBE_PHYSICAL_LAYER_1000BASE_T); break; + case IXGBE_DEV_ID_82598EB_SFP_LOM: + hw->phy.ops.identify_sfp(hw); + + switch (hw->phy.sfp_type) { + case ixgbe_sfp_type_da_cu: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case ixgbe_sfp_type_sr: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + break; + case ixgbe_sfp_type_lr: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; + default: + physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + break; + } + break; default: physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; @@ -935,12 +1090,13 @@ static struct ixgbe_eeprom_operations eeprom_ops_82598 = { static struct ixgbe_phy_operations phy_ops_82598 = { .identify = &ixgbe_identify_phy_generic, - /* .identify_sfp = &ixgbe_identify_sfp_module_generic, */ + .identify_sfp = &ixgbe_identify_sfp_module_generic, .reset = &ixgbe_reset_phy_generic, .read_reg = &ixgbe_read_phy_reg_generic, .write_reg = &ixgbe_write_phy_reg_generic, .setup_link = &ixgbe_setup_phy_link_generic, .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, + .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598, }; struct ixgbe_info ixgbe_82598_info = { diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 91dde9c..6620397 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -74,8 +74,14 @@ static struct pci_device_id ixgbe_pci_tbl[] = { board_82598 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_DA_DUAL_PORT), + board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM), + board_82598 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_XF_LR), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM), + board_82598 }, /* required last entry */ {0, } @@ -2680,6 +2686,57 @@ err_alloc_queues: } /** + * ixgbe_sfp_timer - worker thread to find a missing module + * @data: pointer to our adapter struct + **/ +static void ixgbe_sfp_timer(unsigned long data) +{ + struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data; + + /* Do the sfp_timer outside of interrupt context due to the + * delays that sfp+ detection requires + */ + schedule_work(&adapter->sfp_task); +} + +/** + * ixgbe_sfp_task - worker thread to find a missing module + * @work: pointer to work_struct containing our data + **/ +static void ixgbe_sfp_task(struct work_struct *work) +{ + struct ixgbe_adapter *adapter = container_of(work, + struct ixgbe_adapter, + sfp_task); + struct ixgbe_hw *hw = &adapter->hw; + + if ((hw->phy.type == ixgbe_phy_nl) && + (hw->phy.sfp_type == ixgbe_sfp_type_not_present)) { + s32 ret = hw->phy.ops.identify_sfp(hw); + if (ret) + goto reschedule; + ret = hw->phy.ops.reset(hw); + if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) { + DPRINTK(PROBE, ERR, "failed to initialize because an " + "unsupported SFP+ module type was detected.\n" + "Reload the driver after installing a " + "supported module.\n"); + unregister_netdev(adapter->netdev); + } else { + DPRINTK(PROBE, INFO, "detected SFP+: %d\n", + hw->phy.sfp_type); + } + /* don't need this routine any more */ + clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); + } + return; +reschedule: + if (test_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state)) + mod_timer(&adapter->sfp_timer, + round_jiffies(jiffies + (2 * HZ))); +} + +/** * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter) * @adapter: board private structure to initialize * @@ -4006,11 +4063,31 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, /* PHY */ memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops)); - /* phy->sfp_type = ixgbe_sfp_type_unknown; */ + hw->phy.sfp_type = ixgbe_sfp_type_unknown; + + /* set up this timer and work struct before calling get_invariants + * which might start the timer + */ + init_timer(&adapter->sfp_timer); + adapter->sfp_timer.function = &ixgbe_sfp_timer; + adapter->sfp_timer.data = (unsigned long) adapter; + + INIT_WORK(&adapter->sfp_task, ixgbe_sfp_task); err = ii->get_invariants(hw); - if (err) + if (err == IXGBE_ERR_SFP_NOT_PRESENT) { + /* start a kernel thread to watch for a module to arrive */ + set_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); + mod_timer(&adapter->sfp_timer, + round_jiffies(jiffies + (2 * HZ))); + err = 0; + } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { + DPRINTK(PROBE, ERR, "failed to load because an " + "unsupported SFP+ module type was detected.\n"); goto err_hw_init; + } else if (err) { + goto err_hw_init; + } /* setup the private structure */ err = ixgbe_sw_init(adapter); @@ -4144,6 +4221,9 @@ err_hw_init: err_sw_init: ixgbe_reset_interrupt_capability(adapter); err_eeprom: + clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); + del_timer_sync(&adapter->sfp_timer); + cancel_work_sync(&adapter->sfp_task); iounmap(hw->hw_addr); err_ioremap: free_netdev(netdev); @@ -4170,8 +4250,15 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) struct ixgbe_adapter *adapter = netdev_priv(netdev); set_bit(__IXGBE_DOWN, &adapter->state); + /* clear the module not found bit to make sure the worker won't + * reschedule + */ + clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); del_timer_sync(&adapter->watchdog_timer); + del_timer_sync(&adapter->sfp_timer); + cancel_work_sync(&adapter->watchdog_task); + cancel_work_sync(&adapter->sfp_task); flush_scheduled_work(); #ifdef CONFIG_IXGBE_DCA @@ -4182,7 +4269,8 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) } #endif - unregister_netdev(netdev); + if (netdev->reg_state == NETREG_REGISTERED) + unregister_netdev(netdev); ixgbe_reset_interrupt_capability(adapter); diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 981e6d8..5a8669a 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -127,6 +127,9 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) case QT2022_PHY_ID: phy_type = ixgbe_phy_qt; break; + case ATH_PHY_ID: + phy_type = ixgbe_phy_nl; + break; default: phy_type = ixgbe_phy_unknown; break; @@ -430,6 +433,261 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, } /** + * ixgbe_reset_phy_nl - Performs a PHY reset + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) +{ + u16 phy_offset, control, eword, edata, block_crc; + bool end_data = false; + u16 list_offset, data_offset; + u16 phy_data = 0; + s32 ret_val = 0; + u32 i; + + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); + + /* reset the PHY and poll for completion */ + hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, + (phy_data | IXGBE_MDIO_PHY_XS_RESET)); + + for (i = 0; i < 100; i++) { + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); + if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0) + break; + msleep(10); + } + + if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) { + hw_dbg(hw, "PHY reset did not complete.\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + + /* Get init offsets */ + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, + &data_offset); + if (ret_val != 0) + goto out; + + ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc); + data_offset++; + while (!end_data) { + /* + * Read control word from PHY init contents offset + */ + ret_val = hw->eeprom.ops.read(hw, data_offset, &eword); + control = (eword & IXGBE_CONTROL_MASK_NL) >> + IXGBE_CONTROL_SHIFT_NL; + edata = eword & IXGBE_DATA_MASK_NL; + switch (control) { + case IXGBE_DELAY_NL: + data_offset++; + hw_dbg(hw, "DELAY: %d MS\n", edata); + msleep(edata); + break; + case IXGBE_DATA_NL: + hw_dbg(hw, "DATA: \n"); + data_offset++; + hw->eeprom.ops.read(hw, data_offset++, + &phy_offset); + for (i = 0; i < edata; i++) { + hw->eeprom.ops.read(hw, data_offset, &eword); + hw->phy.ops.write_reg(hw, phy_offset, + IXGBE_TWINAX_DEV, eword); + hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword, + phy_offset); + data_offset++; + phy_offset++; + } + break; + case IXGBE_CONTROL_NL: + data_offset++; + hw_dbg(hw, "CONTROL: \n"); + if (edata == IXGBE_CONTROL_EOL_NL) { + hw_dbg(hw, "EOL\n"); + end_data = true; + } else if (edata == IXGBE_CONTROL_SOL_NL) { + hw_dbg(hw, "SOL\n"); + } else { + hw_dbg(hw, "Bad control value\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + break; + default: + hw_dbg(hw, "Bad control type\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + } + +out: + return ret_val; +} + +/** + * ixgbe_identify_sfp_module_generic - Identifies SFP module and assigns + * the PHY type. + * @hw: pointer to hardware structure + * + * Searches for and indentifies the SFP module. Assings appropriate PHY type. + **/ +s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u32 vendor_oui = 0; + u8 identifier = 0; + u8 comp_codes_1g = 0; + u8 comp_codes_10g = 0; + u8 oui_bytes[4] = {0, 0, 0, 0}; + u8 transmission_media = 0; + + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, + &identifier); + + if (status == IXGBE_ERR_SFP_NOT_PRESENT) { + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + goto out; + } + + if (identifier == IXGBE_SFF_IDENTIFIER_SFP) { + hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_1GBE_COMP_CODES, + &comp_codes_1g); + hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES, + &comp_codes_10g); + hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_TRANSMISSION_MEDIA, + &transmission_media); + + /* ID Module + * ========= + * 0 SFP_DA_CU + * 1 SFP_SR + * 2 SFP_LR + */ + if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_da_cu; + else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_sr; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_lr; + else + hw->phy.sfp_type = ixgbe_sfp_type_unknown; + + /* Determine PHY vendor */ + if (hw->phy.type == ixgbe_phy_unknown) { + hw->phy.id = identifier; + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE0, + &oui_bytes[0]); + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE1, + &oui_bytes[1]); + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE2, + &oui_bytes[2]); + + vendor_oui = + ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | + (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | + (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT)); + + switch (vendor_oui) { + case IXGBE_SFF_VENDOR_OUI_TYCO: + if (transmission_media & + IXGBE_SFF_TWIN_AX_CAPABLE) + hw->phy.type = ixgbe_phy_tw_tyco; + break; + case IXGBE_SFF_VENDOR_OUI_FTL: + hw->phy.type = ixgbe_phy_sfp_ftl; + break; + case IXGBE_SFF_VENDOR_OUI_AVAGO: + hw->phy.type = ixgbe_phy_sfp_avago; + break; + default: + if (transmission_media & + IXGBE_SFF_TWIN_AX_CAPABLE) + hw->phy.type = ixgbe_phy_tw_unknown; + else + hw->phy.type = ixgbe_phy_sfp_unknown; + break; + } + } + status = 0; + } + +out: + return status; +} + +/** + * ixgbe_get_sfp_init_sequence_offsets - Checks the MAC's EEPROM to see + * if it supports a given SFP+ module type, if so it returns the offsets to the + * phy init sequence block. + * @hw: pointer to hardware structure + * @list_offset: offset to the SFP ID list + * @data_offset: offset to the SFP data block + **/ +s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, + u16 *list_offset, + u16 *data_offset) +{ + u16 sfp_id; + + if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) + return IXGBE_ERR_SFP_NOT_SUPPORTED; + + if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) + return IXGBE_ERR_SFP_NOT_PRESENT; + + if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) && + (hw->phy.sfp_type == ixgbe_sfp_type_da_cu)) + return IXGBE_ERR_SFP_NOT_SUPPORTED; + + /* Read offset to PHY init contents */ + hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset); + + if ((!*list_offset) || (*list_offset == 0xFFFF)) + return IXGBE_ERR_PHY; + + /* Shift offset to first ID word */ + (*list_offset)++; + + /* + * Find the matching SFP ID in the EEPROM + * and program the init sequence + */ + hw->eeprom.ops.read(hw, *list_offset, &sfp_id); + + while (sfp_id != IXGBE_PHY_INIT_END_NL) { + if (sfp_id == hw->phy.sfp_type) { + (*list_offset)++; + hw->eeprom.ops.read(hw, *list_offset, data_offset); + if ((!*data_offset) || (*data_offset == 0xFFFF)) { + hw_dbg(hw, "SFP+ module not supported\n"); + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } else { + break; + } + } else { + (*list_offset) += 2; + if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) + return IXGBE_ERR_PHY; + } + } + + if (sfp_id == IXGBE_PHY_INIT_END_NL) { + hw_dbg(hw, "No matching SFP+ module found\n"); + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } + + return 0; +} + +/** * ixgbe_check_phy_link_tnx - Determine link and speed status * @hw: pointer to hardware structure * diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h index 5cc063d..43a97bc 100644 --- a/drivers/net/ixgbe/ixgbe_phy.h +++ b/drivers/net/ixgbe/ixgbe_phy.h @@ -63,6 +63,18 @@ #define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500 #define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00 +/* I2C SDA and SCL timing parameters for standard mode */ +#define IXGBE_I2C_T_HD_STA 4 +#define IXGBE_I2C_T_LOW 5 +#define IXGBE_I2C_T_HIGH 4 +#define IXGBE_I2C_T_SU_STA 5 +#define IXGBE_I2C_T_HD_DATA 5 +#define IXGBE_I2C_T_SU_DATA 1 +#define IXGBE_I2C_T_RISE 1 +#define IXGBE_I2C_T_FALL 1 +#define IXGBE_I2C_T_SU_STO 4 +#define IXGBE_I2C_T_BUF 5 + s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw); s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw); @@ -84,4 +96,10 @@ s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, u16 *firmware_version); +s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw); +s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw); +s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, + u16 *list_offset, + u16 *data_offset); + #endif /* _IXGBE_PHY_H_ */ diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 51df39d..83a11ff 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -36,9 +36,12 @@ /* Device IDs */ #define IXGBE_DEV_ID_82598AF_DUAL_PORT 0x10C6 #define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7 +#define IXGBE_DEV_ID_82598EB_SFP_LOM 0x10DB #define IXGBE_DEV_ID_82598AT 0x10C8 #define IXGBE_DEV_ID_82598EB_CX4 0x10DD #define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC +#define IXGBE_DEV_ID_82598_DA_DUAL_PORT 0x10F1 +#define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1 #define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4 /* General Registers */ @@ -453,6 +456,7 @@ #define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4 #define IXGBE_MDIO_AUTO_NEG_DEV_TYPE 0x7 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE 0x1E /* Device 30 */ +#define IXGBE_TWINAX_DEV 1 #define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */ @@ -488,14 +492,27 @@ #define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0 #define IXGBE_MAX_PHY_ADDR 32 -/* PHY IDs*/ +/* PHY IDs */ #define TN1010_PHY_ID 0x00A19410 #define TNX_FW_REV 0xB #define QT2022_PHY_ID 0x0043A400 +#define ATH_PHY_ID 0x03429050 /* PHY Types */ #define IXGBE_M88E1145_E_PHY_ID 0x01410CD0 +/* Special PHY Init Routine */ +#define IXGBE_PHY_INIT_OFFSET_NL 0x002B +#define IXGBE_PHY_INIT_END_NL 0xFFFF +#define IXGBE_CONTROL_MASK_NL 0xF000 +#define IXGBE_DATA_MASK_NL 0x0FFF +#define IXGBE_CONTROL_SHIFT_NL 12 +#define IXGBE_DELAY_NL 0 +#define IXGBE_DATA_NL 1 +#define IXGBE_CONTROL_NL 0x000F +#define IXGBE_CONTROL_EOL_NL 0x0FFF +#define IXGBE_CONTROL_SOL_NL 0x0000 + /* General purpose Interrupt Enable */ #define IXGBE_SDP0_GPIEN 0x00000001 /* SDP0 */ #define IXGBE_SDP1_GPIEN 0x00000002 /* SDP1 */ @@ -1208,6 +1225,7 @@ enum ixgbe_phy_type { ixgbe_phy_tn, ixgbe_phy_qt, ixgbe_phy_xaui, + ixgbe_phy_nl, ixgbe_phy_tw_tyco, ixgbe_phy_tw_unknown, ixgbe_phy_sfp_avago, @@ -1229,6 +1247,7 @@ enum ixgbe_sfp_type { ixgbe_sfp_type_da_cu = 0, ixgbe_sfp_type_sr = 1, ixgbe_sfp_type_lr = 2, + ixgbe_sfp_type_not_present = 0xFFFE, ixgbe_sfp_type_unknown = 0xFFFF }; @@ -1492,6 +1511,7 @@ struct ixgbe_info { #define IXGBE_ERR_PHY_ADDR_INVALID -17 #define IXGBE_ERR_I2C -18 #define IXGBE_ERR_SFP_NOT_SUPPORTED -19 +#define IXGBE_ERR_SFP_NOT_PRESENT -20 #define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF #endif /* _IXGBE_TYPE_H_ */ |