diff options
author | Dominik Brodowski <linux@dominikbrodowski.net> | 2010-03-20 18:35:12 (GMT) |
---|---|---|
committer | Dominik Brodowski <linux@dominikbrodowski.net> | 2010-05-10 08:23:15 (GMT) |
commit | ded6a1a341cb38c4cfeb09d3d01ffe16b5c804b3 (patch) | |
tree | c430b9dc1ee04ecbe39da798524684b2db779b0f | |
parent | 317b6d63000b3cc48c43d582d76063500e531a6c (diff) | |
download | linux-fsl-qoriq-ded6a1a341cb38c4cfeb09d3d01ffe16b5c804b3.tar.xz |
pcmcia: dev_node removal (drivers with updated printk call)
As a second step, remove any usage of dev_node_t from drivers which
only wrote to this typedef/struct, except one printk() which can
easily be replaced by a dev_info()/dev_warn() call.
CC: Harald Welte <laforge@gnumonks.org>
CC: linux-ide@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-usb@vger.kernel.org
Acked-by: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-rw-r--r-- | drivers/char/pcmcia/cm4000_cs.c | 9 | ||||
-rw-r--r-- | drivers/char/pcmcia/synclink_cs.c | 10 | ||||
-rw-r--r-- | drivers/ide/ide-cs.c | 12 | ||||
-rw-r--r-- | drivers/isdn/hardware/avm/avm_cs.c | 60 | ||||
-rw-r--r-- | drivers/isdn/hisax/elsa_cs.c | 27 | ||||
-rw-r--r-- | drivers/isdn/hisax/sedlbauer_cs.c | 37 | ||||
-rw-r--r-- | drivers/isdn/hisax/teles_cs.c | 37 | ||||
-rw-r--r-- | drivers/net/wireless/airo_cs.c | 47 | ||||
-rw-r--r-- | drivers/usb/host/sl811_cs.c | 10 |
9 files changed, 22 insertions, 227 deletions
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 90b199f..e7956ac 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -106,7 +106,6 @@ static int major; /* major number we get from the kernel */ struct cm4000_dev { struct pcmcia_device *p_dev; - dev_node_t node; /* OS node (major,minor) */ unsigned char atr[MAX_ATR]; unsigned char rbuf[512]; @@ -884,8 +883,7 @@ static void monitor_card(unsigned long p) /* slow down warning, but prompt immediately after insertion */ if (dev->cwarn == 0 || dev->cwarn == 10) { set_bit(IS_BAD_CARD, &dev->flags); - printk(KERN_WARNING MODULE_NAME ": device %s: ", - dev->node.dev_name); + dev_warn(&dev->p_dev->dev, MODULE_NAME ": "); if (test_bit(IS_BAD_CSUM, &dev->flags)) { DEBUGP(4, dev, "ATR checksum (0x%.2x, should " "be zero) failed\n", dev->atr_csum); @@ -1781,11 +1779,6 @@ static int cm4000_config(struct pcmcia_device * link, int devno) goto cs_release; dev = link->priv; - sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno); - dev->node.major = major; - dev->node.minor = devno; - dev->node.next = NULL; - link->dev_node = &dev->node; return 0; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 027690b..308903e 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -220,7 +220,6 @@ typedef struct _mgslpc_info { /* PCMCIA support */ struct pcmcia_device *p_dev; - dev_node_t node; int stop; /* SPPP/Cisco HDLC device parts */ @@ -614,13 +613,8 @@ static int mgslpc_config(struct pcmcia_device *link) info->io_base = link->io.BasePort1; info->irq_level = link->irq; - /* add to linked list of devices */ - sprintf(info->node.dev_name, "mgslpc0"); - info->node.major = info->node.minor = 0; - link->dev_node = &info->node; - - printk(KERN_INFO "%s: index 0x%02x:", - info->node.dev_name, link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x:", + link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->io.NumPorts1) diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 17ad91e..0b7815d 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -65,8 +65,7 @@ MODULE_LICENSE("Dual MPL/GPL"); typedef struct ide_info_t { struct pcmcia_device *p_dev; struct ide_host *host; - int ndev; - dev_node_t node; + int ndev; } ide_info_t; static void ide_release(struct pcmcia_device *); @@ -308,13 +307,10 @@ static int ide_config(struct pcmcia_device *link) goto failed; info->ndev = 1; - sprintf(info->node.dev_name, "hd%c", 'a' + host->ports[0]->index * 2); - info->node.major = host->ports[0]->major; - info->node.minor = 0; info->host = host; - link->dev_node = &info->node; - printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n", - info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10); + dev_info(&link->dev, "ide-cs: hd%c: Vpp = %d.%d\n", + 'a' + host->ports[0]->index * 2, + link->conf.Vpp / 10, link->conf.Vpp % 10); kfree(stk); return 0; diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 0d485f6..8bbc452 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -61,31 +61,6 @@ static void avmcs_release(struct pcmcia_device *link); static void avmcs_detach(struct pcmcia_device *p_dev); -/* - A linked list of "instances" of the skeleton device. Each actual - PCMCIA card corresponds to one device instance, and is described - by one struct pcmcia_device structure (defined in ds.h). - - You may not want to use a linked list for this -- for example, the - memory card driver uses an array of struct pcmcia_device pointers, where minor - device numbers are used to derive the corresponding array index. -*/ - -/* - A driver needs to provide a dev_node_t structure for each device - on a card. In some cases, there is only one device per card (for - example, ethernet cards, modems). In other cases, there may be - many actual or logical devices (SCSI adapters, memory cards with - multiple partitions). The dev_node_t structures need to be kept - in a linked list starting at the 'dev' field of a struct pcmcia_device - structure. We allocate them in the card's private data structure, - because they generally can't be allocated dynamically. -*/ - -typedef struct local_info_t { - dev_node_t node; -} local_info_t; - /*====================================================================== avmcs_attach() creates an "instance" of the driver, allocating @@ -100,7 +75,6 @@ typedef struct local_info_t { static int avmcs_probe(struct pcmcia_device *p_dev) { - local_info_t *local; /* The io structure describes IO port mapping */ p_dev->io.NumPorts1 = 16; @@ -113,16 +87,7 @@ static int avmcs_probe(struct pcmcia_device *p_dev) p_dev->conf.ConfigIndex = 1; p_dev->conf.Present = PRESENT_OPTION; - /* Allocate space for private device-specific data */ - local = kzalloc(sizeof(local_info_t), GFP_KERNEL); - if (!local) - goto err; - p_dev->priv = local; - return avmcs_config(p_dev); - - err: - return -ENOMEM; } /* avmcs_attach */ /*====================================================================== @@ -137,7 +102,6 @@ static int avmcs_probe(struct pcmcia_device *p_dev) static void avmcs_detach(struct pcmcia_device *link) { avmcs_release(link); - kfree(link->priv); } /* avmcs_detach */ /*====================================================================== @@ -168,14 +132,11 @@ static int avmcs_configcheck(struct pcmcia_device *p_dev, static int avmcs_config(struct pcmcia_device *link) { - local_info_t *dev; int i = -1; char devname[128]; int cardtype; int (*addcard)(unsigned int port, unsigned irq); - dev = link->priv; - devname[0] = 0; if (link->prod_id[1]) strlcpy(devname, link->prod_id[1], sizeof(devname)); @@ -204,15 +165,11 @@ static int avmcs_config(struct pcmcia_device *link) } while (0); - /* At this point, the dev_node_t structure(s) should be - initialized and arranged in a linked list at link->dev. */ - if (devname[0]) { char *s = strrchr(devname, ' '); if (!s) s = devname; else s++; - strcpy(dev->node.dev_name, s); if (strcmp("M1", s) == 0) { cardtype = AVM_CARDTYPE_M1; } else if (strcmp("M2", s) == 0) { @@ -220,14 +177,8 @@ static int avmcs_config(struct pcmcia_device *link) } else { cardtype = AVM_CARDTYPE_B1; } - } else { - strcpy(dev->node.dev_name, "b1"); + } else cardtype = AVM_CARDTYPE_B1; - } - - dev->node.major = 64; - dev->node.minor = 0; - link->dev_node = &dev->node; /* If any step failed, release any partially configured state */ if (i != 0) { @@ -243,12 +194,11 @@ static int avmcs_config(struct pcmcia_device *link) case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break; } if ((i = (*addcard)(link->io.BasePort1, link->irq)) < 0) { - printk(KERN_ERR "avm_cs: failed to add AVM-%s-Controller at i/o %#x, irq %d\n", - dev->node.dev_name, link->io.BasePort1, link->irq); - avmcs_release(link); - return -ENODEV; + dev_err(&link->dev, "avm_cs: failed to add AVM-Controller at i/o %#x, irq %d\n", + link->io.BasePort1, link->irq); + avmcs_release(link); + return -ENODEV; } - dev->node.minor = i; return 0; } /* avmcs_config */ diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index 8e170e4..218927e 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -87,24 +87,8 @@ static void elsa_cs_release(struct pcmcia_device *link); static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit; -/* - A driver needs to provide a dev_node_t structure for each device - on a card. In some cases, there is only one device per card (for - example, ethernet cards, modems). In other cases, there may be - many actual or logical devices (SCSI adapters, memory cards with - multiple partitions). The dev_node_t structures need to be kept - in a linked list starting at the 'dev' field of a struct pcmcia_device - structure. We allocate them in the card's private data structure, - because they generally shouldn't be allocated dynamically. - In this case, we also provide a flag to indicate if a device is - "stopped" due to a power management event, or card ejection. The - device IO routines can use a flag like this to throttle IO to a - card that is not ready to accept it. -*/ - typedef struct local_info_t { struct pcmcia_device *p_dev; - dev_node_t node; int busy; int cardnr; } local_info_t; @@ -226,16 +210,9 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) if (i != 0) goto failed; - /* At this point, the dev_node_t structure(s) should be - initialized and arranged in a linked list at link->dev. *//* */ - sprintf(dev->node.dev_name, "elsa"); - dev->node.major = dev->node.minor = 0x0; - - link->dev_node = &dev->node; - /* Finally, report what we've done */ - printk(KERN_INFO "%s: index 0x%02x: ", - dev->node.dev_name, link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x: ", + link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->io.NumPorts1) diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 7778385..1f4feaa 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -87,32 +87,8 @@ static void sedlbauer_release(struct pcmcia_device *link); static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit; -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - -/* - A driver needs to provide a dev_node_t structure for each device - on a card. In some cases, there is only one device per card (for - example, ethernet cards, modems). In other cases, there may be - many actual or logical devices (SCSI adapters, memory cards with - multiple partitions). The dev_node_t structures need to be kept - in a linked list starting at the 'dev' field of a struct pcmcia_device - structure. We allocate them in the card's private data structure, - because they generally shouldn't be allocated dynamically. - - In this case, we also provide a flag to indicate if a device is - "stopped" due to a power management event, or card ejection. The - device IO routines can use a flag like this to throttle IO to a - card that is not ready to accept it. -*/ - typedef struct local_info_t { struct pcmcia_device *p_dev; - dev_node_t node; int stop; int cardnr; } local_info_t; @@ -279,7 +255,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, static int __devinit sedlbauer_config(struct pcmcia_device *link) { - local_info_t *dev = link->priv; win_req_t *req; int ret; IsdnCard_t icard; @@ -315,17 +290,9 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) if (ret) goto failed; - /* - At this point, the dev_node_t structure(s) need to be - initialized and arranged in a linked list at link->dev. - */ - sprintf(dev->node.dev_name, "sedlbauer"); - dev->node.major = dev->node.minor = 0; - link->dev_node = &dev->node; - /* Finally, report what we've done */ - printk(KERN_INFO "%s: index 0x%02x:", - dev->node.dev_name, link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x:", + link->conf.ConfigIndex); if (link->conf.Vpp) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); if (link->conf.Attributes & CONF_ENABLE_IRQ) diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 02dec13..5771955 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -68,34 +68,8 @@ static void teles_cs_release(struct pcmcia_device *link); static void teles_detach(struct pcmcia_device *p_dev) __devexit ; -/* - A linked list of "instances" of the teles_cs device. Each actual - PCMCIA card corresponds to one device instance, and is described - by one struct pcmcia_device structure (defined in ds.h). - - You may not want to use a linked list for this -- for example, the - memory card driver uses an array of struct pcmcia_device pointers, where minor - device numbers are used to derive the corresponding array index. -*/ - -/* - A driver needs to provide a dev_node_t structure for each device - on a card. In some cases, there is only one device per card (for - example, ethernet cards, modems). In other cases, there may be - many actual or logical devices (SCSI adapters, memory cards with - multiple partitions). The dev_node_t structures need to be kept - in a linked list starting at the 'dev' field of a struct pcmcia_device - structure. We allocate them in the card's private data structure, - because they generally shouldn't be allocated dynamically. - In this case, we also provide a flag to indicate if a device is - "stopped" due to a power management event, or card ejection. The - device IO routines can use a flag like this to throttle IO to a - card that is not ready to accept it. -*/ - typedef struct local_info_t { struct pcmcia_device *p_dev; - dev_node_t node; int busy; int cardnr; } local_info_t; @@ -216,16 +190,9 @@ static int __devinit teles_cs_config(struct pcmcia_device *link) if (i != 0) goto cs_failed; - /* At this point, the dev_node_t structure(s) should be - initialized and arranged in a linked list at link->dev. *//* */ - sprintf(dev->node.dev_name, "teles"); - dev->node.major = dev->node.minor = 0x0; - - link->dev_node = &dev->node; - /* Finally, report what we've done */ - printk(KERN_INFO "%s: index 0x%02x:", - dev->node.dev_name, link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x:", + link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->io.NumPorts1) diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 7867c51..33bdc6a 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -75,42 +75,7 @@ static void airo_release(struct pcmcia_device *link); static void airo_detach(struct pcmcia_device *p_dev); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'pcmem_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - -/* - A linked list of "instances" of the aironet device. Each actual - PCMCIA card corresponds to one device instance, and is described - by one struct pcmcia_device structure (defined in ds.h). - - You may not want to use a linked list for this -- for example, the - memory card driver uses an array of struct pcmcia_device pointers, - where minor device numbers are used to derive the corresponding - array index. -*/ - -/* - A driver needs to provide a dev_node_t structure for each device - on a card. In some cases, there is only one device per card (for - example, ethernet cards, modems). In other cases, there may be - many actual or logical devices (SCSI adapters, memory cards with - multiple partitions). The dev_node_t structures need to be kept - in a linked list starting at the 'dev' field of a struct pcmcia_device - structure. We allocate them in the card's private data structure, - because they generally shouldn't be allocated dynamically. - - In this case, we also provide a flag to indicate if a device is - "stopped" due to a power management event, or card ejection. The - device IO routines can use a flag like this to throttle IO to a - card that is not ready to accept it. -*/ - typedef struct local_info_t { - dev_node_t node; struct net_device *eth_dev; } local_info_t; @@ -311,17 +276,9 @@ static int airo_config(struct pcmcia_device *link) if (!((local_info_t *)link->priv)->eth_dev) goto failed; - /* - At this point, the dev_node_t structure(s) need to be - initialized and arranged in a linked list at link->dev_node. - */ - strcpy(dev->node.dev_name, ((local_info_t *)link->priv)->eth_dev->name); - dev->node.major = dev->node.minor = 0; - link->dev_node = &dev->node; - /* Finally, report what we've done */ - printk(KERN_INFO "%s: index 0x%02x: ", - dev->node.dev_name, link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x: ", + link->conf.ConfigIndex); if (link->conf.Vpp) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); printk(", irq %d", link->irq); diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index a712788..58cb73c 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -47,7 +47,6 @@ static const char driver_name[DEV_NAME_LEN] = "sl811_cs"; typedef struct local_info_t { struct pcmcia_device *p_dev; - dev_node_t node; } local_info_t; static void sl811_cs_release(struct pcmcia_device * link); @@ -185,7 +184,6 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, static int sl811_cs_config(struct pcmcia_device *link) { struct device *parent = &link->dev; - local_info_t *dev = link->priv; int ret; dev_dbg(&link->dev, "sl811_cs_config\n"); @@ -204,12 +202,8 @@ static int sl811_cs_config(struct pcmcia_device *link) if (ret) goto failed; - sprintf(dev->node.dev_name, driver_name); - dev->node.major = dev->node.minor = 0; - link->dev_node = &dev->node; - - printk(KERN_INFO "%s: index 0x%02x: ", - dev->node.dev_name, link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x: ", + link->conf.ConfigIndex); if (link->conf.Vpp) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); printk(", irq %d", link->irq); |