Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media update from Mauro Carvalho Chehab:

 - OF documentation and patches at core and drivers, to be used by for
   embedded media systems

 - some I2C drivers used on go7007 were rewritten/promoted from staging:
   sony-btf-mpx, tw2804, tw9903, tw9906, wis-ov7640, wis-uda1342

 - add fimc-is driver (Exynos)

 - add a new radio driver: radio-si476x

 - add a two new tuners: r820t and tuner_it913x

 - split camera code on em28xx driver and add more models

 - the cypress firmware load is used outside dvb usb drivers.  So, move
   it to a common directory to make easier to re-use it

 - siano media driver updated to work with sms2270 devices

 - several work done in order to promote go7007 and solo6x1x out of
   staging (still, there are some pending issues)

 - several API compliance fixes at v4l2 drivers that don't behave as
   expected

 - as usual, lots of driver fixes, improvements, cleanups and new device
   addition at the existing drivers.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (831 commits)
  [media] cx88: make core less verbose
  [media] em28xx: fix oops at em28xx_dvb_bus_ctrl()
  [media] s5c73m3: fix indentation of the help section in Kconfig
  [media] cx25821-alsa: get rid of a __must_check warning
  [media] cx25821-video: declare cx25821_vidioc_s_std as static
  [media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap
  [media] r820t: Remove a warning for an unused value
  [media] dib0090: Fix a warning at dib0090_set_EFUSE
  [media] dib8000: fix a warning
  [media] dib8000: Fix sub-channel range
  [media] dib8000: store dtv_property_cache in a temp var
  [media] dib8000: warning fix: declare internal functions as static
  [media] r820t: quiet gcc warning on n_ring
  [media] r820t: memory leak in release()
  [media] r820t: precendence bug in r820t_xtal_check()
  [media] videodev2.h: Remove the unused old V4L1 buffer types
  [media] anysee: Grammar s/report the/report to/
  [media] anysee: Initialize ret = 0 in anysee_frontend_attach()
  [media] media: videobuf2: fix the length check for mmap
  [media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0
  ...

1 files changed, 22 insertions, 24 deletions

diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml
index 31dc4df..a9b15e3 100644
--- a/Documentation/DocBook/media/dvb/dvbproperty.xml
+++ b/Documentation/DocBook/media/dvb/dvbproperty.xml
@@ -903,14 +903,12 @@ enum fe_interleaving {
 			<constant>svalue</constant> is for signed values of the measure (dB measures)
 			and <constant>uvalue</constant> is for unsigned values (counters, relative scale)</para></listitem>
 		<listitem><para><constant>scale</constant> - Scale for the value. It can be:</para>
-			<section id = "fecap-scale-params">
-			<itemizedlist mark='bullet'>
+			<itemizedlist mark='bullet' id="fecap-scale-params">
 				<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - The parameter is supported by the frontend, but it was not possible to collect it (could be a transitory or permanent condition)</para></listitem>
 				<listitem><para><constant>FE_SCALE_DECIBEL</constant> - parameter is a signed value, measured in 1/1000 dB</para></listitem>
 				<listitem><para><constant>FE_SCALE_RELATIVE</constant> - parameter is a unsigned value, where 0 means 0% and 65535 means 100%.</para></listitem>
 				<listitem><para><constant>FE_SCALE_COUNTER</constant> - parameter is a unsigned value that counts the occurrence of an event, like bit error, block error, or lapsed time.</para></listitem>
 			</itemizedlist>
-			</section>
 		</listitem>
 	</itemizedlist>
 	<section id="DTV-STAT-SIGNAL-STRENGTH">
@@ -918,9 +916,9 @@ enum fe_interleaving {
 		<para>Indicates the signal strength level at the analog part of the tuner or of the demod.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_DECIBEL</constant> - signal strength is in 0.0001 dBm units, power measured in miliwatts. This value is generally negative.</listitem>
-			<listitem><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535).</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_DECIBEL</constant> - signal strength is in 0.0001 dBm units, power measured in miliwatts. This value is generally negative.</para></listitem>
+			<listitem><para><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535).</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-CNR">
@@ -928,9 +926,9 @@ enum fe_interleaving {
 		<para>Indicates the Signal to Noise ratio for the main carrier.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_DECIBEL</constant> - Signal/Noise ratio is in 0.0001 dB units.</listitem>
-			<listitem><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535).</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_DECIBEL</constant> - Signal/Noise ratio is in 0.0001 dB units.</para></listitem>
+			<listitem><para><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535).</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-PRE-ERROR-BIT-COUNT">
@@ -943,8 +941,8 @@ enum fe_interleaving {
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted before the inner coding.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted before the inner coding.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-PRE-TOTAL-BIT-COUNT">
@@ -957,9 +955,9 @@ enum fe_interleaving {
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
-				 <link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link>.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
+				 <link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link>.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-POST-ERROR-BIT-COUNT">
@@ -972,8 +970,8 @@ enum fe_interleaving {
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted after the inner coding.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted after the inner coding.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-POST-TOTAL-BIT-COUNT">
@@ -986,9 +984,9 @@ enum fe_interleaving {
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
-				 <link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link>.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
+				 <link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link>.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-ERROR-BLOCK-COUNT">
@@ -998,8 +996,8 @@ enum fe_interleaving {
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error blocks counted after the outer coding.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error blocks counted after the outer coding.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-TOTAL-BLOCK-COUNT">
@@ -1011,9 +1009,9 @@ enum fe_interleaving {
 		by <link linkend="DTV-STAT-TOTAL-BLOCK-COUNT"><constant>DTV-STAT-TOTAL-BLOCK-COUNT</constant></link>.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of blocks counted while measuring
-			<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of blocks counted while measuring
+			<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>.</para></listitem>
 		</itemizedlist>
 	</section>
 	</section>