Merge branch 'master' into for-next

2 files changed, 76 insertions, 1 deletions

diff --git a/Documentation/device-mapper/dm-crypt.txt b/Documentation/device-mapper/dm-crypt.txt
index ddeb749..6b5c42d 100644
--- a/Documentation/device-mapper/dm-crypt.txt
+++ b/Documentation/device-mapper/dm-crypt.txt
@@ -8,7 +8,7 @@ Parameters: <cipher> <key> <iv_offset> <device path> <offset>
 
 <cipher>
     Encryption cipher and an optional IV generation mode.
-    (In format cipher-chainmode-ivopts:ivmode).
+    (In format cipher[:keycount]-chainmode-ivopts:ivmode).
     Examples:
        des
        aes-cbc-essiv:sha256
@@ -20,6 +20,11 @@ Parameters: <cipher> <key> <iv_offset> <device path> <offset>
     Key used for encryption. It is encoded as a hexadecimal number.
     You can only use key sizes that are valid for the selected cipher.
 
+<keycount>
+    Multi-key compatibility mode. You can define <keycount> keys and
+    then sectors are encrypted according to their offsets (sector 0 uses key0;
+    sector 1 uses key1 etc.).  <keycount> must be a power of two.
+
 <iv_offset>
     The IV offset is a sector count that is added to the sector number
     before creating the IV.
diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt
new file mode 100644
index 0000000..33b6b70
--- /dev/null
+++ b/Documentation/device-mapper/dm-raid.txt
@@ -0,0 +1,70 @@
+Device-mapper RAID (dm-raid) is a bridge from DM to MD.  It
+provides a way to use device-mapper interfaces to access the MD RAID
+drivers.
+
+As with all device-mapper targets, the nominal public interfaces are the
+constructor (CTR) tables and the status outputs (both STATUSTYPE_INFO
+and STATUSTYPE_TABLE).  The CTR table looks like the following:
+
+1: <s> <l> raid \
+2:      <raid_type> <#raid_params> <raid_params> \
+3:      <#raid_devs> <meta_dev1> <dev1> .. <meta_devN> <devN>
+
+Line 1 contains the standard first three arguments to any device-mapper
+target - the start, length, and target type fields.  The target type in
+this case is "raid".
+
+Line 2 contains the arguments that define the particular raid
+type/personality/level, the required arguments for that raid type, and
+any optional arguments.  Possible raid types include: raid4, raid5_la,
+raid5_ls, raid5_rs, raid6_zr, raid6_nr, and raid6_nc.  (raid1 is
+planned for the future.)  The list of required and optional parameters
+is the same for all the current raid types.  The required parameters are
+positional, while the optional parameters are given as key/value pairs.
+The possible parameters are as follows:
+ <chunk_size>           Chunk size in sectors.
+ [[no]sync]             Force/Prevent RAID initialization
+ [rebuild <idx>]        Rebuild the drive indicated by the index
+ [daemon_sleep <ms>]    Time between bitmap daemon work to clear bits
+ [min_recovery_rate <kB/sec/disk>]      Throttle RAID initialization
+ [max_recovery_rate <kB/sec/disk>]      Throttle RAID initialization
+ [max_write_behind <sectors>]           See '-write-behind=' (man mdadm)
+ [stripe_cache <sectors>]               Stripe cache size for higher RAIDs
+
+Line 3 contains the list of devices that compose the array in
+metadata/data device pairs.  If the metadata is stored separately, a '-'
+is given for the metadata device position.  If a drive has failed or is
+missing at creation time, a '-' can be given for both the metadata and
+data drives for a given position.
+
+NB. Currently all metadata devices must be specified as '-'.
+
+Examples:
+# RAID4 - 4 data drives, 1 parity
+# No metadata devices specified to hold superblock/bitmap info
+# Chunk size of 1MiB
+# (Lines separated for easy reading)
+0 1960893648 raid \
+        raid4 1 2048 \
+        5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81
+
+# RAID4 - 4 data drives, 1 parity (no metadata devices)
+# Chunk size of 1MiB, force RAID initialization,
+#       min recovery rate at 20 kiB/sec/disk
+0 1960893648 raid \
+        raid4 4 2048 min_recovery_rate 20 sync\
+        5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81
+
+Performing a 'dmsetup table' should display the CTR table used to
+construct the mapping (with possible reordering of optional
+parameters).
+
+Performing a 'dmsetup status' will yield information on the state and
+health of the array.  The output is as follows:
+1: <s> <l> raid \
+2:      <raid_type> <#devices> <1 health char for each dev> <resync_ratio>
+
+Line 1 is standard DM output.  Line 2 is best shown by example:
+        0 1960893648 raid raid4 5 AAAAA 2/490221568
+Here we can see the RAID type is raid4, there are 5 devices - all of
+which are 'A'live, and the array is 2/490221568 complete with recovery.