Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)
  ARM: 6945/1: Add unwinding support for division functions
  ARM: kill pmd_off()
  ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks
  ARM: 6943/1: mm: use TTBR1 instead of reserved context ID
  ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7
  ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area
  ARM: add sendmmsg syscall
  ARM: 6863/1: allow hotplug on msm
  ARM: 6832/1: mmci: support for ST-Ericsson db8500v2
  ARM: 6830/1: mach-ux500: force PrimeCell revisions
  ARM: 6829/1: amba: make hardcoded periphid override hardware
  ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID
  ARM: 6827/1: mach-netx: delete hardcoded periphid
  ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume
  ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2
  ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM
  ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM
  at91: drop at572d940hf support
  at91rm9200: introduce at91rm9200_set_type to specficy cpu package
  at91: drop boot_params and PLAT_PHYS_OFFSET
  ...

1 files changed, 44 insertions, 4 deletions

diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
index 50619a0..7c1329d 100644
--- a/Documentation/devicetree/booting-without-of.txt
+++ b/Documentation/devicetree/booting-without-of.txt
@@ -12,8 +12,9 @@ Table of Contents
 =================
 
   I - Introduction
-    1) Entry point for arch/powerpc
-    2) Entry point for arch/x86
+    1) Entry point for arch/arm
+    2) Entry point for arch/powerpc
+    3) Entry point for arch/x86
 
   II - The DT block format
     1) Header
@@ -148,7 +149,46 @@ upgrades without significantly impacting the kernel code or cluttering
 it with special cases.
 
 
-1) Entry point for arch/powerpc
+1) Entry point for arch/arm
+---------------------------
+
+   There is one single entry point to the kernel, at the start
+   of the kernel image. That entry point supports two calling
+   conventions.  A summary of the interface is described here.  A full
+   description of the boot requirements is documented in
+   Documentation/arm/Booting
+
+        a) ATAGS interface.  Minimal information is passed from firmware
+        to the kernel with a tagged list of predefined parameters.
+
+                r0 : 0
+
+                r1 : Machine type number
+
+                r2 : Physical address of tagged list in system RAM
+
+        b) Entry with a flattened device-tree block.  Firmware loads the
+        physical address of the flattened device tree block (dtb) into r2,
+        r1 is not used, but it is considered good practise to use a valid
+        machine number as described in Documentation/arm/Booting.
+
+                r0 : 0
+
+                r1 : Valid machine type number.  When using a device tree,
+                a single machine type number will often be assigned to
+                represent a class or family of SoCs.
+
+                r2 : physical pointer to the device-tree block
+                (defined in chapter II) in RAM.  Device tree can be located
+                anywhere in system RAM, but it should be aligned on a 64 bit
+                boundary.
+
+   The kernel will differentiate between ATAGS and device tree booting by
+   reading the memory pointed to by r2 and looking for either the flattened
+   device tree block magic value (0xd00dfeed) or the ATAG_CORE value at
+   offset 0x4 from r2 (0x54410001).
+
+2) Entry point for arch/powerpc
 -------------------------------
 
    There is one single entry point to the kernel, at the start
@@ -226,7 +266,7 @@ it with special cases.
   cannot support both configurations with Book E and configurations
   with classic Powerpc architectures.
 
-2) Entry point for arch/x86
+3) Entry point for arch/x86
 -------------------------------
 
   There is one single 32bit entry point to the kernel at code32_start,