diff options
author | Sylvain Meyer <sylvain.meyer@worldonline.fr> | 2005-06-22 00:17:03 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-06-22 02:07:40 (GMT) |
commit | 4ff45f515144d232c83bf55c53f54deecb750296 (patch) | |
tree | 10280fdf90426e2fcc7c751f6419585f0555c10c /Documentation/fb/intelfb.txt | |
parent | df529338d9c5d9329e503955795c89472e1ba6e6 (diff) | |
download | linux-fsl-qoriq-4ff45f515144d232c83bf55c53f54deecb750296.tar.xz |
[PATCH] intelfb documentation
Add a small documentation of the driver parameters.
Signed-off-by: Sylvain Meyer <sylvain.meyer@worldonline.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'Documentation/fb/intelfb.txt')
-rw-r--r-- | Documentation/fb/intelfb.txt | 135 |
1 files changed, 135 insertions, 0 deletions
diff --git a/Documentation/fb/intelfb.txt b/Documentation/fb/intelfb.txt new file mode 100644 index 0000000..c12d39a --- /dev/null +++ b/Documentation/fb/intelfb.txt @@ -0,0 +1,135 @@ +Intel 830M/845G/852GM/855GM/865G/915G Framebuffer driver +================================================================ + +A. Introduction + This is a framebuffer driver for various Intel 810/815 compatible +graphics devices. These would include: + + Intel 830M + Intel 810E845G + Intel 852GM + Intel 855GM + Intel 865G + Intel 915G + +B. List of available options + + a. "video=intelfb" + enables the intelfb driver + + Recommendation: required + + b. "mode=<xres>x<yres>[-<bpp>][@<refresh>]" + select mode + + Recommendation: user preference + (default = 1024x768-32@70) + + c. "vram=<value>" + select amount of system RAM in MB to allocate for the video memory + if not enough RAM was already allocated by the BIOS. + + Recommendation: 1 - 4 MB. + (default = 4 MB) + + d. "voffset=<value>" + select at what offset in MB of the logical memory to allocate the + framebuffer memory. The intent is to avoid the memory blocks + used by standard graphics applications (XFree86). Depending on your + usage, adjust the value up or down, (0 for maximum usage, 63/127 MB + for the least amount). Note, an arbitrary setting may conflict + with XFree86. + + Recommendation: do not set + (default = 48 MB) + + e. "accel" + enable text acceleration. This can be enabled/reenabled anytime + by using 'fbset -accel true/false'. + + Recommendation: enable + (default = set) + + f. "hwcursor" + enable cursor acceleration. + + Recommendation: enable + (default = set) + + g. "mtrr" + enable MTRR. This allows data transfers to the framebuffer memory + to occur in bursts which can significantly increase performance. + Not very helpful with the intel chips because of 'shared memory'. + + Recommendation: set + (default = set) + + h. "fixed" + disable mode switching. + + Recommendation: do not set + (default = not set) + + The binary parameters can be unset with a "no" prefix, example "noaccel". + The default parameter (not named) is the mode. + +C. Kernel booting + +Separate each option/option-pair by commas (,) and the option from its value +with an equals sign (=) as in the following: + +video=i810fb:option1,option2=value2 + +Sample Usage +------------ + +In /etc/lilo.conf, add the line: + +append="video=intelfb:800x600-32@75,accel,hwcursor,vram=8" + +This will initialize the framebuffer to 800x600 at 32bpp and 75Hz. The +framebuffer will use 8 MB of System RAM. hw acceleration of text and cursor +will be enabled. + +D. Module options + + The module parameters are essentially similar to the kernel +parameters. The main difference is that you need to include a Boolean value +(1 for TRUE, and 0 for FALSE) for those options which don't need a value. + +Example, to enable MTRR, include "mtrr=1". + +Sample Usage +------------ + +Using the same setup as described above, load the module like this: + + modprobe intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1 + +Or just add the following to /etc/modprobe.conf + + options intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1 + +and just do a + + modprobe intelfb + + +E. Acknowledgment: + + 1. Geert Uytterhoeven - his excellent howto and the virtual + framebuffer driver code made this possible. + + 2. Jeff Hartmann for his agpgart code. + + 3. David Dawes for his original kernel 2.4 code. + + 4. The X developers. Insights were provided just by reading the + XFree86 source code. + + 5. Antonino A. Daplas for his inspiring i810fb driver. + + 6. Andrew Morton for his kernel patches maintenance. + +########################### +Sylvain |