Merge commit 'v2.6.36' into kbuild/misc

Update to be able to fix a recent change to scripts/basic/docproc.c
(commit eda603f).

13 files changed, 314 insertions, 33 deletions

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 8923597..7f4dceb 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -227,6 +227,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-asihpi
+  -----------------
+
+    Module for AudioScience ASI soundcards
+
+    enable_hpi_hwdep	- enable HPI hwdep for AudioScience soundcard
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-atiixp
   -----------------
 
@@ -482,6 +492,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     reference_rate	- reference sample rate, 44100 or 48000 (default)
     multiple		- multiple to ref. sample rate, 1 or 2 (default)
+    subsystem		- override the PCI SSID for probing; the value
+			  consists of SSVID << 16 | SSDID.  The default is
+			  zero, which means no override.
 
     This module supports multiple cards.
 
@@ -619,28 +632,23 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     
     The power-management is supported.
 
-  Module snd-es968
-  ----------------
-
-    Module for sound cards based on ESS ES968 chip (PnP only).
-
-    This module supports multiple cards, PnP and autoprobe.
-    
-    The power-management is supported.
-
   Module snd-es1688
   -----------------
 
     Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
 
-    port	- port # for ES-1688 chip (0x220,0x240,0x260)
-    fm_port	- port # for OPL3 (option; share the same port as default)
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
     mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
-    irq		- IRQ # for ES-1688 chip (5,7,9,10)
     mpu_irq	- IRQ # for MPU-401 port (5,7,9,10)
+    fm_port	- port # for OPL3 (option; share the same port as default)
+
+    with isapnp=0, the following additional options are available:
+    port	- port # for ES-1688 chip (0x220,0x240,0x260)
+    irq		- IRQ # for ES-1688 chip (5,7,9,10)
     dma8	- DMA # for ES-1688 chip (0,1,3)
 
-    This module supports multiple cards and autoprobe (without MPU-401 port).
+    This module supports multiple cards and autoprobe (without MPU-401 port)
+    and PnP with the ES968 chip.
 
   Module snd-es18xx
   -----------------
@@ -1123,6 +1131,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple cards, autoprobe and ISA PnP.
 
+  Module snd-jazz16
+  -------------------
+
+    Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips:
+    MVD1216 + MVA416 + MVA514.
+
+    port	- port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260)
+    irq		- IRQ # for SB DSP chip (3,5,7,9,10,15)
+    dma8	- DMA # for SB DSP chip (1,3)
+    dma16	- DMA # for SB DSP chip (5,7)
+    mpu_port	- MPU-401 port # (0x300,0x310,0x320,0x330)
+    mpu_irq	- MPU-401 irq # (2,3,5,7)
+
+    This module supports multiple cards.
+
   Module snd-korg1212
   -------------------
 
@@ -1262,7 +1285,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     about this driver.  Note that it has been discontinued, but the 
     Voyetra Turtle Beach knowledge base entry for it is still available
     at
-	http://www.turtlebeach.com/site/kb_ftp/790.asp
+	http://www.turtlebeach.com
 
   Module snd-msnd-pinnacle
   ------------------------
@@ -1791,6 +1814,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-ua101
+  ----------------
+
+    Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces.
+
+    This module supports multiple devices, autoprobe and hotplugging.
+
   Module snd-usb-audio
   --------------------
 
@@ -1923,7 +1953,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   -------------------
 
     Module for sound cards based on the Asus AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), Essence ST
+    i.e., Xonar D1, DX, D2, D2X, DS, HDAV1.3 (Deluxe), Essence ST
     (Deluxe) and Essence STX.
 
     This module supports autoprobe and multiple cards.
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index e72cee9..37c6aad 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -83,8 +83,8 @@ ALC269
 ======
   basic		Basic preset
   quanta	Quanta FL1
-  eeepc-p703	ASUS Eeepc P703 P900A
-  eeepc-p901	ASUS Eeepc P901 S101
+  laptop-amic	Laptops with analog-mic input
+  laptop-dmic	Laptops with digital-mic input
   fujitsu	FSC Amilo
   lifebook	Fujitsu Lifebook S6420
   auto		auto-config reading BIOS (default)
@@ -109,11 +109,18 @@ ALC662/663/272
   asus-mode4	ASUS
   asus-mode5	ASUS
   asus-mode6	ASUS
+  asus-mode7	ASUS
+  asus-mode8	ASUS
   dell		Dell with ALC272
   dell-zm1	Dell ZM1 with ALC272
   samsung-nc10	Samsung NC10 mini notebook
   auto		auto-config reading BIOS (default)
 
+ALC680
+======
+  base		Base model (ASUS NX90)
+  auto		auto-config reading BIOS (default)
+
 ALC882/883/885/888/889
 ======================
   3stack-dig	3-jack with SPDIF I/O
@@ -124,6 +131,8 @@ ALC882/883/885/888/889
   asus-a7m	ASUS A7M
   macpro	MacPro support
   mb5		Macbook 5,1
+  macmini3	Macmini 3,1
+  mba21		Macbook Air 2,1
   mbp3		Macbook Pro rev3
   imac24	iMac 24'' with jack detection
   imac91	iMac 9,1
@@ -279,13 +288,20 @@ Conexant 5051
   laptop	Basic Laptop config (default)
   hp		HP Spartan laptop
   hp-dv6736	HP dv6736
+  hp-f700	HP Compaq Presario F700
+  ideapad	Lenovo IdeaPad laptop
   lenovo-x200	Lenovo X200 laptop
+  toshiba	Toshiba Satellite M300
 
 Conexant 5066
 =============
   laptop	Basic Laptop config (default)
+  hp-laptop	HP laptops, e g G60
   dell-laptop	Dell laptops
+  dell-vostro	Dell Vostro
   olpc-xo-1_5	OLPC XO 1.5
+  ideapad       Lenovo IdeaPad U150
+  thinkpad	Lenovo Thinkpad
 
 STAC9200
 ========
@@ -393,6 +409,7 @@ STAC92HD83*
   mic-ref	Reference board with power management for ports
   dell-s14	Dell laptop
   hp		HP laptops with (inverted) mute-LED
+  hp-dv7-4000	HP dv-7 4000
   auto		BIOS setup (default)
 
 STAC9872
@@ -405,3 +422,7 @@ Cirrus Logic CS4206/4207
   mbp55		MacBook Pro 5,5
   imac27	IMac 27 Inch
   auto		BIOS setup (default)
+
+VIA VT17xx/VT18xx/VT20xx
+========================
+  auto		BIOS setup (default)
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 6325bec..278cc21 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -119,10 +119,18 @@ the codec slots 0 and 1 no matter what the hardware reports.
 
 Interrupt Handling
 ~~~~~~~~~~~~~~~~~~
-In rare but some cases, the interrupt isn't properly handled as
-default.  You would notice this by the DMA transfer error reported by
-ALSA PCM core, for example.  Using MSI might help in such a case.
-Pass `enable_msi=1` option for enabling MSI.
+HD-audio driver uses MSI as default (if available) since 2.6.33
+kernel as MSI works better on some machines, and in general, it's
+better for performance.  However, Nvidia controllers showed bad
+regressions with MSI (especially in a combination with AMD chipset),
+thus we disabled MSI for them.
+
+There seem also still other devices that don't work with MSI.  If you
+see a regression wrt the sound quality (stuttering, etc) or a lock-up
+in the recent kernel, try to pass `enable_msi=0` option to disable
+MSI.  If it works, you can add the known bad device to the blacklist
+defined in hda_intel.c.  In such a case, please report and give the
+patch back to the upstream developer. 
 
 
 HD-AUDIO CODEC
@@ -196,7 +204,6 @@ generic parser regardless of the codec.  Usually the codec-specific
 parser is much better than the generic parser (as now).  Thus this
 option is more about the debugging purpose.
 
-
 Speaker and Headphone Output
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 One of the most frequent (and obvious) bugs with HD-audio is the
@@ -452,6 +459,33 @@ Similarly, the lines after `[verb]` are parsed as `init_verbs`
 sysfs entries, and the lines after `[hint]` are parsed as `hints`
 sysfs entries, respectively.
 
+Another example to override the codec vendor id from 0x12345678 to
+0xdeadbeef is like below:
+------------------------------------------------------------------------
+  [codec]
+  0x12345678 0xabcd1234 2
+
+  [vendor_id]
+  0xdeadbeef
+------------------------------------------------------------------------
+
+In the similar way, you can override the codec subsystem_id via
+`[subsystem_id]`, the revision id via `[revision_id]` line.
+Also, the codec chip name can be rewritten via `[chip_name]` line.
+------------------------------------------------------------------------
+  [codec]
+  0x12345678 0xabcd1234 2
+
+  [subsystem_id]
+  0xffff1111
+
+  [revision_id]
+  0x10
+
+  [chip_name]
+  My-own NEWS-0002
+------------------------------------------------------------------------
+
 The hd-audio driver reads the file via request_firmware().  Thus,
 a patch file has to be located on the appropriate firmware path,
 typically, /lib/firmware.  For example, when you pass the option
@@ -528,7 +562,7 @@ compare the codec registers directly.
 Send a bug report either the followings:
 
 kernel-bugzilla::
-  http://bugme.linux-foundation.org/
+  https://bugzilla.kernel.org/
 alsa-devel ML::
   alsa-devel@alsa-project.org
 
@@ -565,6 +599,9 @@ probing, the proc file is available, so you can get the raw codec
 information before modified by the driver.  Of course, the driver
 isn't usable with `probe_only=1`.  But you can continue the
 configuration via hwdep sysfs file if hda-reconfig option is enabled.
+Using `probe_only` mask 2 skips the reset of HDA codecs (use
+`probe_only=3` as module option). The hwdep interface can be used
+to determine the BIOS codec initialization.
 
 
 hda-verb
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index 07301de..7fcd1ad 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -103,6 +103,8 @@ card*/pcm*/xrun_debug
 	  bit 2 = Enable additional jiffies check
 	  bit 3 = Log hwptr update at each period interrupt
 	  bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
+	  bit 5 = Show last 10 positions on error
+	  bit 6 = Do above only once
 
 	When the bit 0 is set, the driver will show the messages to
 	kernel log when an xrun is detected.  The debug message is
@@ -122,6 +124,12 @@ card*/pcm*/xrun_debug
 	Bits 3 and 4 are for logging the hwptr records.  Note that
 	these will give flood of kernel messages.
 
+	When bit 5 is set, the driver logs the last 10 xrun errors and
+	the proc file shows each jiffies, position, period_size,
+	buffer_size, old_hw_ptr, and hw_ptr_base values.
+
+	When bit 6 is set, the full xrun log is shown only once.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 
diff --git a/Documentation/sound/alsa/alsa-parameters.txt b/Documentation/sound/alsa/alsa-parameters.txt
new file mode 100644
index 0000000..0fa4067
--- /dev/null
+++ b/Documentation/sound/alsa/alsa-parameters.txt
@@ -0,0 +1,135 @@
+                          ALSA Kernel Parameters
+                          ~~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+	snd-ad1816a=	[HW,ALSA]
+
+	snd-ad1848=	[HW,ALSA]
+
+	snd-ali5451=	[HW,ALSA]
+
+	snd-als100=	[HW,ALSA]
+
+	snd-als4000=	[HW,ALSA]
+
+	snd-azt2320=	[HW,ALSA]
+
+	snd-cmi8330=	[HW,ALSA]
+
+	snd-cmipci=	[HW,ALSA]
+
+	snd-cs4231=	[HW,ALSA]
+
+	snd-cs4232=	[HW,ALSA]
+
+	snd-cs4236=	[HW,ALSA]
+
+	snd-cs4281=	[HW,ALSA]
+
+	snd-cs46xx=	[HW,ALSA]
+
+	snd-dt019x=	[HW,ALSA]
+
+	snd-dummy=	[HW,ALSA]
+
+	snd-emu10k1=	[HW,ALSA]
+
+	snd-ens1370=	[HW,ALSA]
+
+	snd-ens1371=	[HW,ALSA]
+
+	snd-es968=	[HW,ALSA]
+
+	snd-es1688=	[HW,ALSA]
+
+	snd-es18xx=	[HW,ALSA]
+
+	snd-es1938=	[HW,ALSA]
+
+	snd-es1968=	[HW,ALSA]
+
+	snd-fm801=	[HW,ALSA]
+
+	snd-gusclassic=	[HW,ALSA]
+
+	snd-gusextreme=	[HW,ALSA]
+
+	snd-gusmax=	[HW,ALSA]
+
+	snd-hdsp=	[HW,ALSA]
+
+	snd-ice1712=	[HW,ALSA]
+
+	snd-intel8x0=	[HW,ALSA]
+
+	snd-interwave=	[HW,ALSA]
+
+	snd-interwave-stb=
+			[HW,ALSA]
+
+	snd-korg1212=	[HW,ALSA]
+
+	snd-maestro3=	[HW,ALSA]
+
+	snd-mpu401=	[HW,ALSA]
+
+	snd-mtpav=	[HW,ALSA]
+
+	snd-nm256=	[HW,ALSA]
+
+	snd-opl3sa2=	[HW,ALSA]
+
+	snd-opti92x-ad1848=
+			[HW,ALSA]
+
+	snd-opti92x-cs4231=
+			[HW,ALSA]
+
+	snd-opti93x=	[HW,ALSA]
+
+	snd-pmac=	[HW,ALSA]
+
+	snd-rme32=	[HW,ALSA]
+
+	snd-rme96=	[HW,ALSA]
+
+	snd-rme9652=	[HW,ALSA]
+
+	snd-sb8=	[HW,ALSA]
+
+	snd-sb16=	[HW,ALSA]
+
+	snd-sbawe=	[HW,ALSA]
+
+	snd-serial=	[HW,ALSA]
+
+	snd-sgalaxy=	[HW,ALSA]
+
+	snd-sonicvibes=	[HW,ALSA]
+
+	snd-sun-amd7930=
+			[HW,ALSA]
+
+	snd-sun-cs4231=	[HW,ALSA]
+
+	snd-trident=	[HW,ALSA]
+
+	snd-usb-audio=	[HW,ALSA,USB]
+
+	snd-via82xx=	[HW,ALSA]
+
+	snd-virmidi=	[HW,ALSA]
+
+	snd-wavefront=	[HW,ALSA]
+
+	snd-ymfpci=	[HW,ALSA]
diff --git a/Documentation/sound/alsa/soc/DAI.txt b/Documentation/sound/alsa/soc/DAI.txt
index 0ebd7ea..c967926 100644
--- a/Documentation/sound/alsa/soc/DAI.txt
+++ b/Documentation/sound/alsa/soc/DAI.txt
@@ -13,7 +13,7 @@ frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97
 frame is 21uS long and is divided into 13 time slots.
 
 The AC97 specification can be found at :-
-http://www.intel.com/design/chipsets/audio/ac97_r23.pdf
+http://www.intel.com/p/en_US/business/design
 
 
 I2S
diff --git a/Documentation/sound/alsa/soc/codec.txt b/Documentation/sound/alsa/soc/codec.txt
index 1e95342..37ba3a7 100644
--- a/Documentation/sound/alsa/soc/codec.txt
+++ b/Documentation/sound/alsa/soc/codec.txt
@@ -143,7 +143,7 @@ struct snd_soc_ops {
 };
 
 Please refer to the ALSA driver PCM documentation for details.
-http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm
+http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
 
 
 5 - DAPM description.
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index 9ac842b..05bf5a0 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -188,8 +188,8 @@ The WM8731 output mixer has 3 inputs (sources)
  3. Mic Sidetone Input
 
 Each input in this example has a kcontrol associated with it (defined in example
-above) and is connected to the output mixer via it's kcontrol name. We can now
-connect the destination widget (wrt audio signal) with it's source widgets.
+above) and is connected to the output mixer via its kcontrol name. We can now
+connect the destination widget (wrt audio signal) with its source widgets.
 
 	/* output mixer */
 	{"Output Mixer", "Line Bypass Switch", "Line Input"},
diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt
index bab7711..2524c75 100644
--- a/Documentation/sound/alsa/soc/machine.txt
+++ b/Documentation/sound/alsa/soc/machine.txt
@@ -67,7 +67,7 @@ static struct snd_soc_dai_link corgi_dai = {
 	.ops = &corgi_ops,
 };
 
-struct snd_soc_card then sets up the machine with it's DAIs. e.g.
+struct snd_soc_card then sets up the machine with its DAIs. e.g.
 
 /* corgi audio machine driver */
 static struct snd_soc_card snd_soc_corgi = {
diff --git a/Documentation/sound/alsa/soc/overview.txt b/Documentation/sound/alsa/soc/overview.txt
index 1e4c6d3..138ac88 100644
--- a/Documentation/sound/alsa/soc/overview.txt
+++ b/Documentation/sound/alsa/soc/overview.txt
@@ -33,7 +33,7 @@ features :-
     and machines.
 
   * Easy I2S/PCM audio interface setup between codec and SoC. Each SoC
-    interface and codec registers it's audio interface capabilities with the
+    interface and codec registers its audio interface capabilities with the
     core and are subsequently matched and configured when the application
     hardware parameters are known.
 
diff --git a/Documentation/sound/alsa/soc/platform.txt b/Documentation/sound/alsa/soc/platform.txt
index b681d17..06d8359 100644
--- a/Documentation/sound/alsa/soc/platform.txt
+++ b/Documentation/sound/alsa/soc/platform.txt
@@ -39,7 +39,7 @@ struct snd_soc_platform {
 };
 
 Please refer to the ALSA driver documentation for details of audio DMA.
-http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm
+http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
 
 An example DMA driver is soc/pxa/pxa2xx-pcm.c
 
diff --git a/Documentation/sound/oss/README.OSS b/Documentation/sound/oss/README.OSS
index fd42b05..c615deb 100644
--- a/Documentation/sound/oss/README.OSS
+++ b/Documentation/sound/oss/README.OSS
@@ -36,7 +36,7 @@ with OSS API.
 
 Packages "snd-util-3.8.tar.gz" and "snd-data-0.1.tar.Z"
 contain useful utilities to be used with this driver.
-See http://www.opensound.com/ossfree/getting.html for
+See http://www.opensound.com/ossfree/ for
 download instructions.
 
 If you are looking for the installation instructions, please
@@ -1438,7 +1438,7 @@ of this driver (see http://www.4Front-tech.com/oss.html for more info).
 There are some common audio chipsets that are not supported yet. For example
 Sierra Aria and IBM Mwave. It's possible that these architectures
 get some support in future but I can't make any promises. Just look
-at the home page (http://www.opensound.com/ossfree/new_cards.html)
+at the home page (http://www.opensound.com/ossfree/)
 for latest info.
 
 Information about unsupported sound cards and chipsets is welcome as well
@@ -1449,7 +1449,6 @@ If you have any corrections and/or comments, please contact me.
 Hannu Savolainen
 hannu@opensound.com
 
-Personal home page:	   http://www.compusonic.fi/~hannu
 home page of OSS/Free: http://www.opensound.com/ossfree
 
 home page of commercial OSS
diff --git a/Documentation/sound/oss/oss-parameters.txt b/Documentation/sound/oss/oss-parameters.txt
new file mode 100644
index 0000000..3ab391e
--- /dev/null
+++ b/Documentation/sound/oss/oss-parameters.txt
@@ -0,0 +1,51 @@
+                          OSS Kernel Parameters
+                          ~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+	ad1848=		[HW,OSS]
+			Format: <io>,<irq>,<dma>,<dma2>,<type>
+
+	aedsp16=	[HW,OSS] Audio Excel DSP 16
+			Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
+			See also header of sound/oss/aedsp16.c.
+
+	dmasound=	[HW,OSS] Sound subsystem buffers
+
+	mpu401=		[HW,OSS]
+			Format: <io>,<irq>
+
+	opl3=		[HW,OSS]
+			Format: <io>
+
+	pas2=		[HW,OSS] Format:
+			<io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
+
+	pss=		[HW,OSS] Personal Sound System (ECHO ESC614)
+			Format:
+			<io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
+
+	sscape=		[HW,OSS]
+			Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
+
+	trix=		[HW,OSS] MediaTrix AudioTrix Pro
+			Format:
+			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
+
+	uart401=	[HW,OSS]
+			Format: <io>,<irq>
+
+	uart6850=	[HW,OSS]
+			Format: <io>,<irq>
+
+	waveartist=	[HW,OSS]
+			Format: <io>,<irq>,<dma>,<dma2>