Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (509 commits)
  V4L/DVB (7078): radio: fix sf16fmi section mismatch
  V4L/DVB (7077): bt878: remove handcrafted PCI subsystem ID check
  V4L/DVB (7075): Make a local function static
  V4L/DVB (7074): DiB7000P: correct tuning problem for 7MHz channel
  V4L/DVB (7073): DiB7070: Reception quality improved
  V4L/DVB (7072): sets the MT2060 IF1 frequency according to EEPROM
  V4L/DVB (7071): DiB0700: Start streaming the right way
  V4L/DVB (7070): Fix some tuning problems
  V4L/DVB (7069):  Support for myTV.t
  V4L/DVB (7068): Add support for WinTV Nova-T-CE driver
  V4L/DVB (7067): fix autoserach in the Hauppauge NOVA-T 500
  V4L/DVB (7066):  ASUS My Cinema U3000 Mini DVBT Tuner
  V4L/DVB (7065): Artec T14BR patches
  V4L/DVB (7063): xc5000: Fix OOPS caused by missing firmware
  V4L/DVB (7062): radio-si570x: Some fixes and new USB ID addition
  V4L/DVB (7061): radio-si470x: Some cleanups
  V4L/DVB (7060): em28xx: remove has_tuner
  V4L/DVB (7059): cx88: Ensure the tuner is reset correctly
  V4L/DVB (7058): IR corrections for the Pinnacle 800i
  V4L/DVB (7056): tuner: suppress obsolete tuner i2c address warning for XC5000 tuners
  ...

11 files changed, 978 insertions, 21 deletions

diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl
index b629da3..b3d93ee 100644
--- a/Documentation/DocBook/videobook.tmpl
+++ b/Documentation/DocBook/videobook.tmpl
@@ -96,7 +96,6 @@ static struct video_device my_radio
 {
         "My radio",
         VID_TYPE_TUNER,
-        VID_HARDWARE_MYRADIO,
         radio_open.
         radio_close,
         NULL,                /* no read */
@@ -119,13 +118,6 @@ static struct video_device my_radio
         way to change channel so it is tuneable.
   </para>
   <para>
-        The VID_HARDWARE_ types are unique to each device. Numbers are assigned by
-        <email>alan@redhat.com</email> when device drivers are going to be released. Until then you
-        can pull a suitably large number out of your hat and use it. 10000 should be
-        safe for a very long time even allowing for the huge number of vendors
-        making new and different radio cards at the moment.
-  </para>
-  <para>
         We declare an open and close routine, but we do not need read or write,
         which are used to read and write video data to or from the card itself. As
         we have no read or write there is no poll function.
@@ -844,7 +836,6 @@ static struct video_device my_camera
         "My Camera",
         VID_TYPE_OVERLAY|VID_TYPE_SCALES|\
         VID_TYPE_CAPTURE|VID_TYPE_CHROMAKEY,
-        VID_HARDWARE_MYCAMERA,
         camera_open.
         camera_close,
         camera_read,      /* no read */
diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt
index ecb47ad..b7b1d1b 100644
--- a/Documentation/dvb/bt8xx.txt
+++ b/Documentation/dvb/bt8xx.txt
@@ -78,6 +78,18 @@ Example:
 For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv.
 In case of further problems please subscribe and send questions to the mailing list: linux-dvb@linuxtv.org.
 
+2c) Probing the cards with broken PCI subsystem ID
+--------------------------------------------------
+There are some TwinHan cards that the EEPROM has become corrupted for some
+reason. The cards do not have correct PCI subsystem ID. But we can force
+probing the cards with broken PCI subsystem ID
+
+	$ echo 109e 0878 $subvendor $subdevice > \
+		/sys/bus/pci/drivers/bt878/new_id
+
+109e: PCI_VENDOR_ID_BROOKTREE
+0878: PCI_DEVICE_ID_BROOKTREE_878
+
 Authors: Richard Walker,
 	 Jamie Honan,
 	 Michael Hunold,
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 00cb646..0924e6e 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -1,5 +1,7 @@
   0 -> UNKNOWN/GENERIC                                     [0070:3400]
   1 -> Hauppauge WinTV-HVR1800lp                           [0070:7600]
-  2 -> Hauppauge WinTV-HVR1800                             [0070:7800,0070:7801]
+  2 -> Hauppauge WinTV-HVR1800                             [0070:7800,0070:7801,0070:7809]
   3 -> Hauppauge WinTV-HVR1250                             [0070:7911]
   4 -> DViCO FusionHDTV5 Express                           [18ac:d500]
+  5 -> Hauppauge WinTV-HVR1500Q                            [0070:7790,0070:7797]
+  6 -> Hauppauge WinTV-HVR1500                             [0070:7710,0070:7717]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 82ac825..bc5593b 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -56,3 +56,4 @@
  55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM  [c180:c980]
  56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder   [0070:9600,0070:9601,0070:9602]
  57 -> ADS Tech Instant Video PCI                          [1421:0390]
+ 58 -> Pinnacle PCTV HD 800i                               [11bd:0051]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 37f0e3c..6a8469f 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -1,14 +1,17 @@
   0 -> Unknown EM2800 video grabber             (em2800)        [eb1a:2800]
-  1 -> Unknown EM2820/2840 video grabber        (em2820/em2840)
+  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2750,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
   2 -> Terratec Cinergy 250 USB                 (em2820/em2840) [0ccd:0036]
   3 -> Pinnacle PCTV USB 2                      (em2820/em2840) [2304:0208]
-  4 -> Hauppauge WinTV USB 2                    (em2820/em2840) [2040:4200]
-  5 -> MSI VOX USB 2.0                          (em2820/em2840) [eb1a:2820]
+  4 -> Hauppauge WinTV USB 2                    (em2820/em2840) [2040:4200,2040:4201]
+  5 -> MSI VOX USB 2.0                          (em2820/em2840)
   6 -> Terratec Cinergy 200 USB                 (em2800)
   7 -> Leadtek Winfast USB II                   (em2800)
   8 -> Kworld USB2800                           (em2800)
-  9 -> Pinnacle Dazzle DVC 90                   (em2820/em2840) [2304:0207]
- 10 -> Hauppauge WinTV HVR 900                  (em2880)
- 11 -> Terratec Hybrid XS                       (em2880)
+  9 -> Pinnacle Dazzle DVC 90/DVC 100           (em2820/em2840) [2304:0207,2304:021a]
+ 10 -> Hauppauge WinTV HVR 900                  (em2880)        [2040:6500]
+ 11 -> Terratec Hybrid XS                       (em2880)        [0ccd:0042]
  12 -> Kworld PVR TV 2800 RF                    (em2820/em2840)
- 13 -> Terratec Prodigy XS                      (em2880)
+ 13 -> Terratec Prodigy XS                      (em2880)        [0ccd:0047]
+ 14 -> Pixelview Prolink PlayTV USB 2.0         (em2820/em2840)
+ 15 -> V-Gear PocketTV                          (em2800)
+ 16 -> Hauppauge WinTV HVR 950                  (em2880)        [2040:6513]
diff --git a/Documentation/video4linux/CARDLIST.ivtv b/Documentation/video4linux/CARDLIST.ivtv
index ddd76a0..a019e27 100644
--- a/Documentation/video4linux/CARDLIST.ivtv
+++ b/Documentation/video4linux/CARDLIST.ivtv
@@ -16,3 +16,9 @@
 16 -> GOTVIEW PCI DVD2 Deluxe 			[ffac:0600]
 17 -> Yuan MPC622 				[ff01:d998]
 18 -> Digital Cowboy DCT-MTVP1 			[1461:bfff]
+19 -> Yuan PG600V2/GotView PCI DVD Lite 	[ffab:0600,ffad:0600]
+20 -> Club3D ZAP-TV1x01				[ffab:0600]
+21 -> AverTV MCE 116 Plus			[1461:c439]
+22 -> ASUS Falcon2				[1043:4b66,1043:462e,1043:4b2e]
+23 -> AverMedia PVR-150 Plus			[1461:c035]
+24 -> AverMedia EZMaker PCI Deluxe		[1461:c03f]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index a145453..5d3b6b4 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -80,7 +80,7 @@
  79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
  80 -> ASUS Digimatrix TV                       [1043:0210]
  81 -> Philips Tiger reference design           [1131:2018]
- 82 -> MSI TV@Anywhere plus                     [1462:6231]
+ 82 -> MSI TV@Anywhere plus                     [1462:6231,1462:8624]
  83 -> Terratec Cinergy 250 PCI TV              [153b:1160]
  84 -> LifeView FlyDVB Trio                     [5168:0319]
  85 -> AverTV DVB-T 777                         [1461:2c05,1461:2c05]
@@ -102,7 +102,7 @@
 101 -> Pinnacle PCTV 310i                       [11bd:002f]
 102 -> Avermedia AVerTV Studio 507              [1461:9715]
 103 -> Compro Videomate DVB-T200A
-104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid     [0070:6701]
+104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid     [0070:6700,0070:6701,0070:6702,0070:6703,0070:6704,0070:6705]
 105 -> Terratec Cinergy HT PCMCIA               [153b:1172]
 106 -> Encore ENLTV                             [1131:2342,1131:2341,3016:2344]
 107 -> Encore ENLTV-FM                          [1131:230f]
@@ -116,3 +116,16 @@
 115 -> Sabrent PCMCIA TV-PCB05                  [0919:2003]
 116 -> 10MOONS TM300 TV Card                    [1131:2304]
 117 -> Avermedia Super 007                      [1461:f01d]
+118 -> Beholder BeholdTV 401                    [0000:4016]
+119 -> Beholder BeholdTV 403                    [0000:4036]
+120 -> Beholder BeholdTV 403 FM                 [0000:4037]
+121 -> Beholder BeholdTV 405                    [0000:4050]
+122 -> Beholder BeholdTV 405 FM                 [0000:4051]
+123 -> Beholder BeholdTV 407                    [0000:4070]
+124 -> Beholder BeholdTV 407 FM                 [0000:4071]
+125 -> Beholder BeholdTV 409                    [0000:4090]
+126 -> Beholder BeholdTV 505 FM/RDS             [0000:5051,0000:505B,5ace:5050]
+127 -> Beholder BeholdTV 507 FM/RDS / BeholdTV 509 FM [0000:5071,0000:507B,5ace:5070,5ace:5090]
+128 -> Beholder BeholdTV Columbus TVFM          [0000:5201]
+129 -> Beholder BeholdTV 607 / BeholdTV 609     [5ace:6070,5ace:6071,5ace:6072,5ace:6073,5ace:6090,5ace:6091,5ace:6092,5ace:6093]
+130 -> Beholder BeholdTV M6 / BeholdTV M6 Extra [5ace:6190,5ace:6193]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index a88c02d..0e23946 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -52,7 +52,7 @@ tuner=50 - TCL 2002N
 tuner=51 - Philips PAL/SECAM_D (FM 1256 I-H3)
 tuner=52 - Thomson DTT 7610 (ATSC/NTSC)
 tuner=53 - Philips FQ1286
-tuner=54 - tda8290+75
+tuner=54 - Philips/NXP TDA 8290/8295 + 8275/8275A/18271
 tuner=55 - TCL 2002MB
 tuner=56 - Philips PAL/SECAM multi (FQ1216AME MK4)
 tuner=57 - Philips FQ1236A MK4
@@ -69,7 +69,8 @@ tuner=67 - Philips TD1316 Hybrid Tuner
 tuner=68 - Philips TUV1236D ATSC/NTSC dual in
 tuner=69 - Tena TNF 5335 and similar models
 tuner=70 - Samsung TCPN 2121P30A
-tuner=71 - Xceive xc3028
+tuner=71 - Xceive xc2028/xc3028 tuner
 tuner=72 - Thomson FE6600
 tuner=73 - Samsung TCPG 6121P30A
 tuner=75 - Philips TEA5761 FM Radio
+tuner=76 - Xceive 5000 tuner
diff --git a/Documentation/video4linux/CARDLIST.usbvision b/Documentation/video4linux/CARDLIST.usbvision
index 3d6850e..0b72d3f 100644
--- a/Documentation/video4linux/CARDLIST.usbvision
+++ b/Documentation/video4linux/CARDLIST.usbvision
@@ -62,3 +62,4 @@
  61 -> Pinnacle Studio Linx Video input cable (PAL)             [2304:0301]
  62 -> Pinnacle PCTV Bungee USB (PAL) FM                        [2304:0419]
  63 -> Hauppauge WinTv-USB                                      [2400:4200]
+ 64 -> Pinnacle Studio PCTV USB (NTSC) FM V3                    [2304:0113]
diff --git a/Documentation/video4linux/extract_xc3028.pl b/Documentation/video4linux/extract_xc3028.pl
new file mode 100644
index 0000000..cced8ac
--- /dev/null
+++ b/Documentation/video4linux/extract_xc3028.pl
@@ -0,0 +1,926 @@
+#!/usr/bin/perl
+
+# Copyright (c) Mauro Carvalho Chehab <mchehab@infradead.org>
+# Released under GPLv2
+#
+# In order to use, you need to:
+#	1) Download the windows driver with something like:
+#		wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
+#	2) Extract the file hcw85bda.sys from the zip into the current dir:
+#		unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys
+#	3) run the script:
+#		./extract_xc3028.pl
+#	4) copy the generated file:
+#		cp xc3028-v27.fw /lib/firmware
+
+#use strict;
+use IO::Handle;
+
+my $debug=0;
+
+sub verify ($$)
+{
+	my ($filename, $hash) = @_;
+	my ($testhash);
+
+	if (system("which md5sum > /dev/null 2>&1")) {
+		die "This firmware requires the md5sum command - see http://www.gnu.org/software/coreutils/\n";
+	}
+
+	open(CMD, "md5sum ".$filename."|");
+	$testhash = <CMD>;
+	$testhash =~ /([a-zA-Z0-9]*)/;
+	$testhash = $1;
+	close CMD;
+		die "Hash of extracted file does not match (found $testhash, expected $hash!\n" if ($testhash ne $hash);
+}
+
+sub get_hunk ($$)
+{
+	my ($offset, $length) = @_;
+	my ($chunklength, $buf, $rcount, $out);
+
+	sysseek(INFILE, $offset, SEEK_SET);
+	while ($length > 0) {
+	# Calc chunk size
+		$chunklength = 2048;
+		$chunklength = $length if ($chunklength > $length);
+
+		$rcount = sysread(INFILE, $buf, $chunklength);
+		die "Ran out of data\n" if ($rcount != $chunklength);
+		$out .= $buf;
+		$length -= $rcount;
+	}
+	return $out;
+}
+
+sub write_le16($)
+{
+	my $val = shift;
+	my $msb = ($val >> 8) &0xff;
+	my $lsb = $val & 0xff;
+
+	syswrite(OUTFILE, chr($lsb).chr($msb));
+}
+
+sub write_le32($)
+{
+	my $val = shift;
+	my $l3 = ($val >> 24) & 0xff;
+	my $l2 = ($val >> 16) & 0xff;
+	my $l1 = ($val >> 8)  & 0xff;
+	my $l0 = $val         & 0xff;
+
+	syswrite(OUTFILE, chr($l0).chr($l1).chr($l2).chr($l3));
+}
+
+sub write_le64($$)
+{
+	my $msb_val = shift;
+	my $lsb_val = shift;
+	my $l7 = ($msb_val >> 24) & 0xff;
+	my $l6 = ($msb_val >> 16) & 0xff;
+	my $l5 = ($msb_val >> 8)  & 0xff;
+	my $l4 = $msb_val         & 0xff;
+
+	my $l3 = ($lsb_val >> 24) & 0xff;
+	my $l2 = ($lsb_val >> 16) & 0xff;
+	my $l1 = ($lsb_val >> 8)  & 0xff;
+	my $l0 = $lsb_val         & 0xff;
+
+	syswrite(OUTFILE,
+		 chr($l0).chr($l1).chr($l2).chr($l3).
+		 chr($l4).chr($l5).chr($l6).chr($l7));
+}
+
+sub write_hunk($$)
+{
+	my ($offset, $length) = @_;
+	my $out = get_hunk($offset, $length);
+
+	printf "(len %d) ",$length if ($debug);
+
+	for (my $i=0;$i<$length;$i++) {
+		printf "%02x ",ord(substr($out,$i,1)) if ($debug);
+	}
+	printf "\n" if ($debug);
+
+	syswrite(OUTFILE, $out);
+}
+
+sub write_hunk_fix_endian($$)
+{
+	my ($offset, $length) = @_;
+	my $out = get_hunk($offset, $length);
+
+	printf "(len_fix %d) ",$length if ($debug);
+
+	for (my $i=0;$i<$length;$i++) {
+		printf "%02x ",ord(substr($out,$i,1)) if ($debug);
+	}
+	printf "\n" if ($debug);
+
+	my $i=0;
+	while ($i<$length) {
+		my $size = ord(substr($out,$i,1))*256+ord(substr($out,$i+1,1));
+		syswrite(OUTFILE, substr($out,$i+1,1));
+		syswrite(OUTFILE, substr($out,$i,1));
+		$i+=2;
+		if ($size>0 && $size <0x8000) {
+			for (my $j=0;$j<$size;$j++) {
+				syswrite(OUTFILE, substr($out,$j+$i,1));
+			}
+			$i+=$size;
+		}
+	}
+}
+
+sub main_firmware($$$$)
+{
+	my $out;
+	my $j=0;
+	my $outfile = shift;
+	my $name    = shift;
+	my $version = shift;
+	my $nr_desc = shift;
+
+	for ($j = length($name); $j <32; $j++) {
+		$name = $name.chr(0);
+}
+
+	open OUTFILE, ">$outfile";
+	syswrite(OUTFILE, $name);
+	write_le16($version);
+	write_le16($nr_desc);
+
+	#
+	# Firmware 0, type: BASE FW   F8MHZ (0x00000003), id: (0000000000000000), size: 8718
+	#
+
+	write_le32(0x00000003);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(8718);			# Size
+	write_hunk_fix_endian(813432, 8718);
+
+	#
+	# Firmware 1, type: BASE FW   F8MHZ MTS (0x00000007), id: (0000000000000000), size: 8712
+	#
+
+	write_le32(0x00000007);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(8712);			# Size
+	write_hunk_fix_endian(822152, 8712);
+
+	#
+	# Firmware 2, type: BASE FW   FM (0x00000401), id: (0000000000000000), size: 8562
+	#
+
+	write_le32(0x00000401);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(8562);			# Size
+	write_hunk_fix_endian(830872, 8562);
+
+	#
+	# Firmware 3, type: BASE FW   FM INPUT1 (0x00000c01), id: (0000000000000000), size: 8576
+	#
+
+	write_le32(0x00000c01);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(8576);			# Size
+	write_hunk_fix_endian(839440, 8576);
+
+	#
+	# Firmware 4, type: BASE FW   (0x00000001), id: (0000000000000000), size: 8706
+	#
+
+	write_le32(0x00000001);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(8706);			# Size
+	write_hunk_fix_endian(848024, 8706);
+
+	#
+	# Firmware 5, type: BASE FW   MTS (0x00000005), id: (0000000000000000), size: 8682
+	#
+
+	write_le32(0x00000005);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(8682);			# Size
+	write_hunk_fix_endian(856736, 8682);
+
+	#
+	# Firmware 6, type: STD FW    (0x00000000), id: PAL/BG A2/A (0000000100000007), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x00000001, 0x00000007);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(865424, 161);
+
+	#
+	# Firmware 7, type: STD FW    MTS (0x00000004), id: PAL/BG A2/A (0000000100000007), size: 169
+	#
+
+	write_le32(0x00000004);			# Type
+	write_le64(0x00000001, 0x00000007);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(865592, 169);
+
+	#
+	# Firmware 8, type: STD FW    (0x00000000), id: PAL/BG A2/B (0000000200000007), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x00000002, 0x00000007);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(865424, 161);
+
+	#
+	# Firmware 9, type: STD FW    MTS (0x00000004), id: PAL/BG A2/B (0000000200000007), size: 169
+	#
+
+	write_le32(0x00000004);			# Type
+	write_le64(0x00000002, 0x00000007);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(865592, 169);
+
+	#
+	# Firmware 10, type: STD FW    (0x00000000), id: PAL/BG NICAM/A (0000000400000007), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x00000004, 0x00000007);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(866112, 161);
+
+	#
+	# Firmware 11, type: STD FW    MTS (0x00000004), id: PAL/BG NICAM/A (0000000400000007), size: 169
+	#
+
+	write_le32(0x00000004);			# Type
+	write_le64(0x00000004, 0x00000007);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(866280, 169);
+
+	#
+	# Firmware 12, type: STD FW    (0x00000000), id: PAL/BG NICAM/B (0000000800000007), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x00000008, 0x00000007);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(866112, 161);
+
+	#
+	# Firmware 13, type: STD FW    MTS (0x00000004), id: PAL/BG NICAM/B (0000000800000007), size: 169
+	#
+
+	write_le32(0x00000004);			# Type
+	write_le64(0x00000008, 0x00000007);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(866280, 169);
+
+	#
+	# Firmware 14, type: STD FW    (0x00000000), id: PAL/DK A2 (00000003000000e0), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x00000003, 0x000000e0);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(866800, 161);
+
+	#
+	# Firmware 15, type: STD FW    MTS (0x00000004), id: PAL/DK A2 (00000003000000e0), size: 169
+	#
+
+	write_le32(0x00000004);			# Type
+	write_le64(0x00000003, 0x000000e0);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(866968, 169);
+
+	#
+	# Firmware 16, type: STD FW    (0x00000000), id: PAL/DK NICAM (0000000c000000e0), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x0000000c, 0x000000e0);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(867144, 161);
+
+	#
+	# Firmware 17, type: STD FW    MTS (0x00000004), id: PAL/DK NICAM (0000000c000000e0), size: 169
+	#
+
+	write_le32(0x00000004);			# Type
+	write_le64(0x0000000c, 0x000000e0);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(867312, 169);
+
+	#
+	# Firmware 18, type: STD FW    (0x00000000), id: SECAM/K1 (0000000000200000), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x00000000, 0x00200000);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(867488, 161);
+
+	#
+	# Firmware 19, type: STD FW    MTS (0x00000004), id: SECAM/K1 (0000000000200000), size: 169
+	#
+
+	write_le32(0x00000004);			# Type
+	write_le64(0x00000000, 0x00200000);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(867656, 169);
+
+	#
+	# Firmware 20, type: STD FW    (0x00000000), id: SECAM/K3 (0000000004000000), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x00000000, 0x04000000);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(867832, 161);
+
+	#
+	# Firmware 21, type: STD FW    MTS (0x00000004), id: SECAM/K3 (0000000004000000), size: 169
+	#
+
+	write_le32(0x00000004);			# Type
+	write_le64(0x00000000, 0x04000000);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(868000, 169);
+
+	#
+	# Firmware 22, type: STD FW    D2633 DTV6 ATSC (0x00010030), id: (0000000000000000), size: 149
+	#
+
+	write_le32(0x00010030);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(149);			# Size
+	write_hunk_fix_endian(868176, 149);
+
+	#
+	# Firmware 23, type: STD FW    D2620 DTV6 QAM (0x00000068), id: (0000000000000000), size: 149
+	#
+
+	write_le32(0x00000068);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(149);			# Size
+	write_hunk_fix_endian(868336, 149);
+
+	#
+	# Firmware 24, type: STD FW    D2633 DTV6 QAM (0x00000070), id: (0000000000000000), size: 149
+	#
+
+	write_le32(0x00000070);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(149);			# Size
+	write_hunk_fix_endian(868488, 149);
+
+	#
+	# Firmware 25, type: STD FW    D2620 DTV7 (0x00000088), id: (0000000000000000), size: 149
+	#
+
+	write_le32(0x00000088);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(149);			# Size
+	write_hunk_fix_endian(868648, 149);
+
+	#
+	# Firmware 26, type: STD FW    D2633 DTV7 (0x00000090), id: (0000000000000000), size: 149
+	#
+
+	write_le32(0x00000090);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(149);			# Size
+	write_hunk_fix_endian(868800, 149);
+
+	#
+	# Firmware 27, type: STD FW    D2620 DTV78 (0x00000108), id: (0000000000000000), size: 149
+	#
+
+	write_le32(0x00000108);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(149);			# Size
+	write_hunk_fix_endian(868960, 149);
+
+	#
+	# Firmware 28, type: STD FW    D2633 DTV78 (0x00000110), id: (0000000000000000), size: 149
+	#
+
+	write_le32(0x00000110);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(149);			# Size
+	write_hunk_fix_endian(869112, 149);
+
+	#
+	# Firmware 29, type: STD FW    D2620 DTV8 (0x00000208), id: (0000000000000000), size: 149
+	#
+
+	write_le32(0x00000208);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(149);			# Size
+	write_hunk_fix_endian(868648, 149);
+
+	#
+	# Firmware 30, type: STD FW    D2633 DTV8 (0x00000210), id: (0000000000000000), size: 149
+	#
+
+	write_le32(0x00000210);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(149);			# Size
+	write_hunk_fix_endian(868800, 149);
+
+	#
+	# Firmware 31, type: STD FW    FM (0x00000400), id: (0000000000000000), size: 135
+	#
+
+	write_le32(0x00000400);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le32(135);			# Size
+	write_hunk_fix_endian(869584, 135);
+
+	#
+	# Firmware 32, type: STD FW    (0x00000000), id: PAL/I (0000000000000010), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x00000000, 0x00000010);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(869728, 161);
+
+	#
+	# Firmware 33, type: STD FW    MTS (0x00000004), id: PAL/I (0000000000000010), size: 169
+	#
+
+	write_le32(0x00000004);			# Type
+	write_le64(0x00000000, 0x00000010);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(869896, 169);
+
+	#
+	# Firmware 34, type: STD FW    (0x00000000), id: SECAM/L AM (0000001000400000), size: 169
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x00000010, 0x00400000);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(870072, 169);
+
+	#
+	# Firmware 35, type: STD FW    (0x00000000), id: SECAM/L NICAM (0000000c00400000), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x0000000c, 0x00400000);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(870248, 161);
+
+	#
+	# Firmware 36, type: STD FW    (0x00000000), id: SECAM/Lc (0000000000800000), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x00000000, 0x00800000);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(870416, 161);
+
+	#
+	# Firmware 37, type: STD FW    (0x00000000), id: NTSC/M Kr (0000000000008000), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x00000000, 0x00008000);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(870584, 161);
+
+	#
+	# Firmware 38, type: STD FW    LCD (0x00001000), id: NTSC/M Kr (0000000000008000), size: 161
+	#
+
+	write_le32(0x00001000);			# Type
+	write_le64(0x00000000, 0x00008000);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(870752, 161);
+
+	#
+	# Firmware 39, type: STD FW    LCD NOGD (0x00003000), id: NTSC/M Kr (0000000000008000), size: 161
+	#
+
+	write_le32(0x00003000);			# Type
+	write_le64(0x00000000, 0x00008000);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(870920, 161);
+
+	#
+	# Firmware 40, type: STD FW    MTS (0x00000004), id: NTSC/M Kr (0000000000008000), size: 169
+	#
+
+	write_le32(0x00000004);			# Type
+	write_le64(0x00000000, 0x00008000);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(871088, 169);
+
+	#
+	# Firmware 41, type: STD FW    (0x00000000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x00000000, 0x0000b700);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(871264, 161);
+
+	#
+	# Firmware 42, type: STD FW    LCD (0x00001000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161
+	#
+
+	write_le32(0x00001000);			# Type
+	write_le64(0x00000000, 0x0000b700);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(871432, 161);
+
+	#
+	# Firmware 43, type: STD FW    LCD NOGD (0x00003000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161
+	#
+
+	write_le32(0x00003000);			# Type
+	write_le64(0x00000000, 0x0000b700);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(871600, 161);
+
+	#
+	# Firmware 44, type: STD FW    (0x00000000), id: NTSC/M Jp (0000000000002000), size: 161
+	#
+
+	write_le32(0x00000000);			# Type
+	write_le64(0x00000000, 0x00002000);	# ID
+	write_le32(161);			# Size
+	write_hunk_fix_endian(871264, 161);
+
+	#
+	# Firmware 45, type: STD FW    MTS (0x00000004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169
+	#
+
+	write_le32(0x00000004);			# Type
+	write_le64(0x00000000, 0x0000b700);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(871936, 169);
+
+	#
+	# Firmware 46, type: STD FW    MTS LCD (0x00001004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169
+	#
+
+	write_le32(0x00001004);			# Type
+	write_le64(0x00000000, 0x0000b700);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(872112, 169);
+
+	#
+	# Firmware 47, type: STD FW    MTS LCD NOGD (0x00003004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169
+	#
+
+	write_le32(0x00003004);			# Type
+	write_le64(0x00000000, 0x0000b700);	# ID
+	write_le32(169);			# Size
+	write_hunk_fix_endian(872288, 169);
+
+	#
+	# Firmware 48, type: SCODE FW  HAS IF (0x60000000), IF = 3.28 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(3280);			# IF
+	write_le32(192);			# Size
+	write_hunk(811896, 192);
+
+	#
+	# Firmware 49, type: SCODE FW  HAS IF (0x60000000), IF = 3.30 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(3300);			# IF
+	write_le32(192);			# Size
+	write_hunk(813048, 192);
+
+	#
+	# Firmware 50, type: SCODE FW  HAS IF (0x60000000), IF = 3.44 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(3440);			# IF
+	write_le32(192);			# Size
+	write_hunk(812280, 192);
+
+	#
+	# Firmware 51, type: SCODE FW  HAS IF (0x60000000), IF = 3.46 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(3460);			# IF
+	write_le32(192);			# Size
+	write_hunk(812472, 192);
+
+	#
+	# Firmware 52, type: SCODE FW  DTV6 ATSC OREN36 HAS IF (0x60210020), IF = 3.80 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60210020);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(3800);			# IF
+	write_le32(192);			# Size
+	write_hunk(809784, 192);
+
+	#
+	# Firmware 53, type: SCODE FW  HAS IF (0x60000000), IF = 4.00 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(4000);			# IF
+	write_le32(192);			# Size
+	write_hunk(812088, 192);
+
+	#
+	# Firmware 54, type: SCODE FW  DTV6 ATSC TOYOTA388 HAS IF (0x60410020), IF = 4.08 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60410020);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(4080);			# IF
+	write_le32(192);			# Size
+	write_hunk(809976, 192);
+
+	#
+	# Firmware 55, type: SCODE FW  HAS IF (0x60000000), IF = 4.20 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(4200);			# IF
+	write_le32(192);			# Size
+	write_hunk(811704, 192);
+
+	#
+	# Firmware 56, type: SCODE FW  MONO HAS IF (0x60008000), IF = 4.32 MHz id: NTSC/M Kr (0000000000008000), size: 192
+	#
+
+	write_le32(0x60008000);			# Type
+	write_le64(0x00000000, 0x00008000);	# ID
+	write_le16(4320);			# IF
+	write_le32(192);			# Size
+	write_hunk(808056, 192);
+
+	#
+	# Firmware 57, type: SCODE FW  HAS IF (0x60000000), IF = 4.45 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(4450);			# IF
+	write_le32(192);			# Size
+	write_hunk(812664, 192);
+
+	#
+	# Firmware 58, type: SCODE FW  HAS IF (0x60000000), IF = 4.50 MHz id: NTSC/M Jp (0000000000002000), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000000, 0x00002000);	# ID
+	write_le16(4500);			# IF
+	write_le32(192);			# Size
+	write_hunk(807672, 192);
+
+	#
+	# Firmware 59, type: SCODE FW  LCD NOGD IF HAS IF (0x60023000), IF = 4.60 MHz id: NTSC/M Kr (0000000000008000), size: 192
+	#
+
+	write_le32(0x60023000);			# Type
+	write_le64(0x00000000, 0x00008000);	# ID
+	write_le16(4600);			# IF
+	write_le32(192);			# Size
+	write_hunk(807864, 192);
+
+	#
+	# Firmware 60, type: SCODE FW  DTV78 ZARLINK456 HAS IF (0x62000100), IF = 4.76 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x62000100);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(4760);			# IF
+	write_le32(192);			# Size
+	write_hunk(807288, 192);
+
+	#
+	# Firmware 61, type: SCODE FW  HAS IF (0x60000000), IF = 4.94 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(4940);			# IF
+	write_le32(192);			# Size
+	write_hunk(811512, 192);
+
+	#
+	# Firmware 62, type: SCODE FW  DTV7 ZARLINK456 HAS IF (0x62000080), IF = 5.26 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x62000080);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(5260);			# IF
+	write_le32(192);			# Size
+	write_hunk(810552, 192);
+
+	#
+	# Firmware 63, type: SCODE FW  MONO HAS IF (0x60008000), IF = 5.32 MHz id: PAL/BG NICAM/B (0000000800000007), size: 192
+	#
+
+	write_le32(0x60008000);			# Type
+	write_le64(0x00000008, 0x00000007);	# ID
+	write_le16(5320);			# IF
+	write_le32(192);			# Size
+	write_hunk(810744, 192);
+
+	#
+	# Firmware 64, type: SCODE FW  DTV8 CHINA HAS IF (0x64000200), IF = 5.40 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x64000200);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(5400);			# IF
+	write_le32(192);			# Size
+	write_hunk(807096, 192);
+
+	#
+	# Firmware 65, type: SCODE FW  DTV6 ATSC OREN538 HAS IF (0x60110020), IF = 5.58 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60110020);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(5580);			# IF
+	write_le32(192);			# Size
+	write_hunk(809592, 192);
+
+	#
+	# Firmware 66, type: SCODE FW  HAS IF (0x60000000), IF = 5.64 MHz id: PAL/BG A2/B (0000000200000007), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000002, 0x00000007);	# ID
+	write_le16(5640);			# IF
+	write_le32(192);			# Size
+	write_hunk(808440, 192);
+
+	#
+	# Firmware 67, type: SCODE FW  HAS IF (0x60000000), IF = 5.74 MHz id: PAL/BG NICAM/B (0000000800000007), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000008, 0x00000007);	# ID
+	write_le16(5740);			# IF
+	write_le32(192);			# Size
+	write_hunk(808632, 192);
+
+	#
+	# Firmware 68, type: SCODE FW  DTV7 DIBCOM52 HAS IF (0x61000080), IF = 5.90 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x61000080);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(5900);			# IF
+	write_le32(192);			# Size
+	write_hunk(810360, 192);
+
+	#
+	# Firmware 69, type: SCODE FW  MONO HAS IF (0x60008000), IF = 6.00 MHz id: PAL/I (0000000000000010), size: 192
+	#
+
+	write_le32(0x60008000);			# Type
+	write_le64(0x00000000, 0x00000010);	# ID
+	write_le16(6000);			# IF
+	write_le32(192);			# Size
+	write_hunk(808824, 192);
+
+	#
+	# Firmware 70, type: SCODE FW  DTV6 QAM F6MHZ HAS IF (0x68000060), IF = 6.20 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x68000060);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(6200);			# IF
+	write_le32(192);			# Size
+	write_hunk(809400, 192);
+
+	#
+	# Firmware 71, type: SCODE FW  HAS IF (0x60000000), IF = 6.24 MHz id: PAL/I (0000000000000010), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000000, 0x00000010);	# ID
+	write_le16(6240);			# IF
+	write_le32(192);			# Size
+	write_hunk(808248, 192);
+
+	#
+	# Firmware 72, type: SCODE FW  MONO HAS IF (0x60008000), IF = 6.32 MHz id: SECAM/K1 (0000000000200000), size: 192
+	#
+
+	write_le32(0x60008000);			# Type
+	write_le64(0x00000000, 0x00200000);	# ID
+	write_le16(6320);			# IF
+	write_le32(192);			# Size
+	write_hunk(811320, 192);
+
+	#
+	# Firmware 73, type: SCODE FW  HAS IF (0x60000000), IF = 6.34 MHz id: SECAM/K1 (0000000000200000), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000000, 0x00200000);	# ID
+	write_le16(6340);			# IF
+	write_le32(192);			# Size
+	write_hunk(809208, 192);
+
+	#
+	# Firmware 74, type: SCODE FW  MONO HAS IF (0x60008000), IF = 6.50 MHz id: SECAM/K3 (0000000004000000), size: 192
+	#
+
+	write_le32(0x60008000);			# Type
+	write_le64(0x00000000, 0x04000000);	# ID
+	write_le16(6500);			# IF
+	write_le32(192);			# Size
+	write_hunk(811128, 192);
+
+	#
+	# Firmware 75, type: SCODE FW  DTV6 ATSC ATI638 HAS IF (0x60090020), IF = 6.58 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60090020);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(6580);			# IF
+	write_le32(192);			# Size
+	write_hunk(807480, 192);
+
+	#
+	# Firmware 76, type: SCODE FW  HAS IF (0x60000000), IF = 6.60 MHz id: PAL/DK A2 (00000003000000e0), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000003, 0x000000e0);	# ID
+	write_le16(6600);			# IF
+	write_le32(192);			# Size
+	write_hunk(809016, 192);
+
+	#
+	# Firmware 77, type: SCODE FW  MONO HAS IF (0x60008000), IF = 6.68 MHz id: PAL/DK A2 (00000003000000e0), size: 192
+	#
+
+	write_le32(0x60008000);			# Type
+	write_le64(0x00000003, 0x000000e0);	# ID
+	write_le16(6680);			# IF
+	write_le32(192);			# Size
+	write_hunk(810936, 192);
+
+	#
+	# Firmware 78, type: SCODE FW  DTV6 ATSC TOYOTA794 HAS IF (0x60810020), IF = 8.14 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60810020);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(8140);			# IF
+	write_le32(192);			# Size
+	write_hunk(810168, 192);
+
+	#
+	# Firmware 79, type: SCODE FW  HAS IF (0x60000000), IF = 8.20 MHz id: (0000000000000000), size: 192
+	#
+
+	write_le32(0x60000000);			# Type
+	write_le64(0x00000000, 0x00000000);	# ID
+	write_le16(8200);			# IF
+	write_le32(192);			# Size
+	write_hunk(812856, 192);
+}
+
+sub extract_firmware {
+	my $sourcefile = "hcw85bda.sys";
+	my $hash = "0e44dbf63bb0169d57446aec21881ff2";
+	my $outfile = "xc3028-v27.fw";
+	my $name = "xc2028 firmware";
+	my $version = 519;
+	my $nr_desc = 80;
+	my $out;
+
+	verify($sourcefile, $hash);
+
+	open INFILE, "<$sourcefile";
+	main_firmware($outfile, $name, $version, $nr_desc);
+	close INFILE;
+}
+
+extract_firmware;
+printf "Firmwares generated.\n";
diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt
index 1ffad19..b26f519 100644
--- a/Documentation/video4linux/sn9c102.txt
+++ b/Documentation/video4linux/sn9c102.txt
@@ -568,6 +568,7 @@ the fingerprint is: '88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4'.
 Many thanks to following persons for their contribute (listed in alphabetical
 order):
 
+- David Anderson for the donation of a webcam;
 - Luca Capello for the donation of a webcam;
 - Philippe Coval for having helped testing the PAS202BCA image sensor;
 - Joao Rodrigo Fuzaro, Joao Limirio, Claudio Filho and Caio Begotti for the