summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
authorShengzhou Liu <Shengzhou.Liu@freescale.com>2014-08-19 02:10:58 (GMT)
committerMatthew Weigel <Matthew.Weigel@freescale.com>2014-12-11 18:39:10 (GMT)
commitba7d34f7f5477e83a07db14d364f60c92d1cca41 (patch)
tree4300379ac09054ff1a270b7d53ce420a19c3cf07 /README
parent587e4905b80654a98074b838a699d864b1cebdb9 (diff)
downloadlinux-fsl-qoriq-ba7d34f7f5477e83a07db14d364f60c92d1cca41.tar.xz
powerpc/fsl-booke: Add T102x QDS board support
Add support for Freescale T1024/T1023 QorIQ Development System Board. T1024QDS is a high-performance computing evaluation, development and test platform for T1024 QorIQ Power Architecture processor. T1024QDS board Overview ----------------------- - T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz - CoreNet fabric supporting coherent and noncoherent transactions with prioritization and bandwidth allocation - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Accelerator: DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC - Ethernet interfaces: - Two 10M/100M/1G RGMII ports on-board - Three 1G/2.5Gbps SGMII ports - Four 1Gbps QSGMII ports - one 10Gbps XFI or 10G Base-KR interface - SerDes: 4 lanes up to 10.3125GHz Supporting SGMII/QSGMII, XFI, PCIe, SATA and Aurora - PCIe: Three PCI Express controllers with five PCIe slots. - IFC: 128MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA - Video: DIU supports video up to 1280x1024x32 bpp. - Chrontel CH7201 for HDMI connection. - TI DS90C387R for direct LCD connection. - Raw (not encoded) video connector for testing or other encoders. - QUICC Engine block - 32-bit RISC controller for flexible support of the communications peripherals - Serial DMA channel for receive and transmit on all serial channels - Two universal communication controllers, supporting TDM, HDLC, and UART - Deep sleep power management implementaion (wakeup from GPIO/Timer/Ethernet/USB) - eSPI: Three SPI flash devices. - SATA: one SATA 2.O. - USB: Two USB2.0 ports with internal PHY (one Type-A and one micro Type mini-AB) - eSDHC: Support SD, SDHC, SDXC and MMC/eMMC. - I2C: Four I2C controllers. - UART: Two UART on board. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I8d4f93e21c2f6d76fa09144994e9724596a3a601 Reviewed-on: http://git.am.freescale.net:8181/21421 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com>
Diffstat (limited to 'README')
0 files changed, 0 insertions, 0 deletions