Merge tag 'dt-3.12' of git://git.infradead.org/linux-mvebu into next/soc

From Jason Cooper:
mvebu dt changes for v3.12
 - kirkwood
    - add ZyXEL NSA310 board, fan for ReadyNAS Duo v2
 - mvebu
    - add ReadyNAS 102 board
 - misc dts updates and changes.

v2:
 - dropped mv64xxx-i2c change

* tag 'dt-3.12' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: Fix the Armada 370/XP timer compatible strings
  ARM: mvebu: use dts pre-processor for readynas 102
  ARM: kirkwood: use dts pre-processor for nsa310 boards
  ARM: mvebu: use correct #interrupt-cells instead of #interrupts-cells
  ARM: Kirkwood: Add support for another ZyXEL NSA310 variant
  ARM: mvebu: Add Netgear ReadyNAS 102 board
  arm: kirkwood: readynas duo v2: Add GMT G762 Fan Controller

Signed-off-by: Olof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/boot/dts/kirkwood-nsa310.dts

1 files changed, 179 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
new file mode 100644
index 0000000..05e4485
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -0,0 +1,179 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS 102
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 102";
+	compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			pinctrl {
+				power_led_pin: power-led-pin {
+					marvell,pins = "mpp57";
+					marvell,function = "gpio";
+				};
+				sata1_led_pin: sata1-led-pin {
+					marvell,pins = "mpp15";
+					marvell,function = "gpio";
+				};
+
+				sata2_led_pin: sata2-led-pin {
+					marvell,pins = "mpp14";
+					marvell,function = "gpio";
+				};
+
+				backup_led_pin: backup-led-pin {
+					marvell,pins = "mpp56";
+					marvell,function = "gpio";
+				};
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				clock-frequency = <100000>;
+				status = "okay";
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+			};
+
+			pcie-controller {
+				status = "okay";
+
+				/* Connected to Marvell SATA controller */
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+
+				/* Connected to FL1009 USB 3.0 controller */
+				pcie@2,0 {
+					/* Port 1, Lane 0 */
+					status = "okay";
+				};
+			};
+		};
+	};
+
+	clocks {
+	       #address-cells = <1>;
+	       #size-cells = <0>;
+
+	       g762_clk: fixedclk {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <8192>;
+	       };
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &power_led_pin
+			      &sata1_led_pin
+			      &sata2_led_pin
+			      &backup_led_pin >;
+		pinctrl-names = "default";
+
+		blue_power_led {
+			label = "rn102:blue:pwr";
+			gpios = <&gpio1 25 1>;  /* GPIO 57 Active Low */
+			linux,default-trigger = "heartbeat";
+		};
+
+		green_sata1_led {
+			label = "rn102:green:sata1";
+			gpios = <&gpio0 15 1>;  /* GPIO 15 Active Low */
+			default-state = "on";
+		};
+
+		green_sata2_led {
+			label = "rn102:green:sata2";
+			gpios = <&gpio0 14 1>;   /* GPIO 14 Active Low */
+			default-state = "on";
+		};
+
+		green_backup_led {
+			label = "rn102:green:backup";
+			gpios = <&gpio1 24 1>;   /* GPIO 56 Active Low */
+			default-state = "on";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <116>;     /* KEY_POWER */
+			gpios = <&gpio1 30 1>;
+		};
+
+		button@2 {
+			label = "Reset Button";
+			linux,code = <0x198>;   /* KEY_RESTART */
+			gpios = <&gpio0 6 1>;
+		};
+
+		button@3 {
+			label = "Backup Button";
+			linux,code = <133>;     /* KEY_COPY */
+			gpios = <&gpio1 26 1>;
+		};
+	};
+
+};