Merge branch 'at91' into devel

1 files changed, 145 insertions, 44 deletions

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 3add030..c340f66 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -108,60 +108,151 @@
 				interrupts = <21 4 0>;
 			};
 
-			pioA: gpio@fffff200 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff200 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc003ff  /* pioA */
+				       0xffffffff 0x800f8f00  /* pioB */
+				       0xffffffff 0x00000e00  /* pioC */
+				       0xffffffff 0xff0c1381  /* pioD */
+				       0xffffffff 0x81ffff81  /* pioE */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<1 12 0x1 0x0	/* PB12 periph A */
+							 1 13 0x1 0x0>;	/* PB13 periph A */
+					};
+				};
 
-			pioB: gpio@fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<1 19 0x1 0x1	/* PB19 periph A with pullup */
+							 1 18 0x1 0x0>;	/* PB18 periph A */
+					};
+
+					pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+						atmel,pins =
+							<1 17 0x2 0x0	/* PB17 periph B */
+							 1 15 0x2 0x0>;	/* PB15 periph B */
+					};
+				};
 
-			pioC: gpio@fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <4 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<1 4 0x1 0x1	/* PB4 periph A with pullup */
+							 1 5 0x1 0x0>;	/* PB5 periph A */
+					};
+
+					pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+						atmel,pins =
+							<3 16 0x1 0x0	/* PD16 periph A */
+							 3 17 0x1 0x0>;	/* PD17 periph A */
+					};
+				};
 
-			pioD: gpio@fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <5 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<1 6 0x1 0x1	/* PB6 periph A with pullup */
+							 1 7 0x1 0x0>;	/* PB7 periph A */
+					};
+
+					pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+						atmel,pins =
+							<2 9 0x2 0x0	/* PC9 periph B */
+							 2 11 0x2 0x0>;	/* PC11 periph B */
+					};
+				};
 
-			pioE: gpio@fffffa00 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <5 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<1 8 0x1 0x1	/* PB9 periph A with pullup */
+							 1 9 0x1 0x0>;	/* PB8 periph A */
+					};
+
+					pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+						atmel,pins =
+							<0 23 0x2 0x0	/* PA23 periph B */
+							 0 24 0x2 0x0>;	/* PA24 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<2 8 0x0 0x1	/* PC8 gpio RDY pin pull_up*/
+							 2 14 0x0 0x1>;	/* PC14 gpio enable pin pull_up */
+					};
+				};
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <5 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -171,6 +262,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
 				status = "disabled";
 			};
 
@@ -180,6 +273,8 @@
 				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
 				status = "disabled";
 			};
 
@@ -189,6 +284,8 @@
 				interrupts = <9 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
 				status = "disabled";
 			};
 
@@ -198,6 +295,8 @@
 				interrupts = <10 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3>;
 				status = "disabled";
 			};
 
@@ -273,6 +372,8 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioC 8 0
 				 &pioC 14 0
 				 0