Merge branch 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt

From Benoit Cousson:

omap devicetree changes for v3.11 merge window

- Add mandatory DT support for missing IPs, like USB host,
  bandgap, LED, NAND, LAN, CPSW, PWM for OMAP and AMXX devices.
- Introduce new AM43x silicon.

* 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt: (52 commits)
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ARM: dts: omap3-overo: Add default trigger for TWL4030 LED
  ARM: dts: omap3-tobi: Correct polarity for GPIO LED
  ARM: dts: omap3-tobi: Add SMSC911X node
  ARM: dts: OMAP3: Include IRQ header
  ARM: dts: Protect pinctrl headers against multiple inclusions
  ARM: AM33XX: clock data: Enable clkout2 as part of init
  ARM: AM33XX: clock: Add debugSS clock nodes
  ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes
  ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk
  ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm
  ARM: dts: AM33XX: Add PWMSS device tree nodes
  ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>

1 files changed, 104 insertions, 69 deletions

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 9e8083f..e643620 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -7,15 +7,11 @@
  * Based on "omap4.dtsi"
  */
 
-/*
- * Carveout for multimedia usecases
- * It should be the last 48MB of the first 512MB memory part
- * In theory, it should not even exist. That zone should be reserved
- * dynamically during the .reserve callback.
- */
-/memreserve/ 0x9d000000 0x03000000;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	#address-cells = <1>;
@@ -51,11 +47,11 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		/* PPI secure/nonsecure IRQ, active low level-sensitive */
-		interrupts = <1 13 0x308>,
-			     <1 14 0x308>,
-			     <1 11 0x308>,
-			     <1 10 0x308>;
+		/* PPI secure/nonsecure IRQ */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <6144000>;
 	};
 
@@ -97,8 +93,8 @@
 		reg = <0x44000000 0x2000>,
 		      <0x44800000 0x3000>,
 		      <0x45000000 0x4000>;
-		interrupts = <0 9 0x4>,
-			     <0 10 0x4>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
 		counter32k: counter@4ae04000 {
 			compatible = "ti,omap-counter32k";
@@ -126,10 +122,10 @@
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
-			interrupts = <0 12 0x4>,
-				     <0 13 0x4>,
-				     <0 14 0x4>,
-				     <0 15 0x4>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			#dma-channels = <32>;
 			#dma-requests = <127>;
@@ -138,7 +134,7 @@
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4ae10000 0x200>;
-			interrupts = <0 29 0x4>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio1";
 			ti,gpio-always-on;
 			gpio-controller;
@@ -150,7 +146,7 @@
 		gpio2: gpio@48055000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x48055000 0x200>;
-			interrupts = <0 30 0x4>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio2";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -161,7 +157,7 @@
 		gpio3: gpio@48057000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x48057000 0x200>;
-			interrupts = <0 31 0x4>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio3";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -172,7 +168,7 @@
 		gpio4: gpio@48059000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x48059000 0x200>;
-			interrupts = <0 32 0x4>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio4";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -183,7 +179,7 @@
 		gpio5: gpio@4805b000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4805b000 0x200>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio5";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -194,7 +190,7 @@
 		gpio6: gpio@4805d000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4805d000 0x200>;
-			interrupts = <0 34 0x4>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio6";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -205,7 +201,7 @@
 		gpio7: gpio@48051000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x48051000 0x200>;
-			interrupts = <0 35 0x4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio7";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -216,7 +212,7 @@
 		gpio8: gpio@48053000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x48053000 0x200>;
-			interrupts = <0 121 0x4>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio8";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -229,7 +225,7 @@
 			reg = <0x50000000 0x1000>;
 			#address-cells = <2>;
 			#size-cells = <1>;
-			interrupts = <0 20 0x4>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
@@ -238,7 +234,7 @@
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48070000 0x100>;
-			interrupts = <0 56 0x4>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -247,7 +243,7 @@
 		i2c2: i2c@48072000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48072000 0x100>;
-			interrupts = <0 57 0x4>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -256,7 +252,7 @@
 		i2c3: i2c@48060000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48060000 0x100>;
-			interrupts = <0 61 0x4>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
@@ -265,7 +261,7 @@
 		i2c4: i2c@4807a000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x4807a000 0x100>;
-			interrupts = <0 62 0x4>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c4";
@@ -274,7 +270,7 @@
 		i2c5: i2c@4807c000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x4807c000 0x100>;
-			interrupts = <0 60 0x4>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c5";
@@ -283,7 +279,7 @@
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x48098000 0x200>;
-			interrupts = <0 65 0x4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
@@ -303,7 +299,7 @@
 		mcspi2: spi@4809a000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x4809a000 0x200>;
-			interrupts = <0 66 0x4>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
@@ -318,7 +314,7 @@
 		mcspi3: spi@480b8000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x480b8000 0x200>;
-			interrupts = <0 91 0x4>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
@@ -330,7 +326,7 @@
 		mcspi4: spi@480ba000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x480ba000 0x200>;
-			interrupts = <0 48 0x4>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
@@ -342,7 +338,7 @@
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x4806a000 0x100>;
-			interrupts = <0 72 0x4>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
@@ -350,7 +346,7 @@
 		uart2: serial@4806c000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x4806c000 0x100>;
-			interrupts = <0 73 0x4>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
@@ -358,7 +354,7 @@
 		uart3: serial@48020000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x48020000 0x100>;
-			interrupts = <0 74 0x4>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
@@ -366,7 +362,7 @@
 		uart4: serial@4806e000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x4806e000 0x100>;
-			interrupts = <0 70 0x4>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
@@ -374,7 +370,7 @@
 		uart5: serial@48066000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x48066000 0x100>;
-			interrupts = <0 105 0x4>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 		};
@@ -382,7 +378,7 @@
 		uart6: serial@48068000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x48068000 0x100>;
-			interrupts = <0 106 0x4>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 		};
@@ -390,7 +386,7 @@
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x4809c000 0x400>;
-			interrupts = <0 83 0x4>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
@@ -401,7 +397,7 @@
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x480b4000 0x400>;
-			interrupts = <0 86 0x4>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
 			dmas = <&sdma 47>, <&sdma 48>;
@@ -411,7 +407,7 @@
 		mmc3: mmc@480ad000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x480ad000 0x400>;
-			interrupts = <0 94 0x4>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
 			dmas = <&sdma 77>, <&sdma 78>;
@@ -421,7 +417,7 @@
 		mmc4: mmc@480d1000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x480d1000 0x400>;
-			interrupts = <0 96 0x4>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
 			dmas = <&sdma 57>, <&sdma 58>;
@@ -431,7 +427,7 @@
 		mmc5: mmc@480d5000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x480d5000 0x400>;
-			interrupts = <0 59 0x4>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc5";
 			ti,needs-special-reset;
 			dmas = <&sdma 59>, <&sdma 60>;
@@ -449,7 +445,7 @@
 			reg = <0x40132000 0x7f>, /* MPU private access */
 			      <0x49032000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 112 0x4>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mcpdm";
 			dmas = <&sdma 65>,
 			       <&sdma 66>;
@@ -461,7 +457,7 @@
 			reg = <0x4012e000 0x7f>, /* MPU private access */
 			      <0x4902e000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 114 0x4>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "dmic";
 			dmas = <&sdma 67>;
 			dma-names = "up_link";
@@ -472,7 +468,7 @@
 			reg = <0x40122000 0xff>, /* MPU private access */
 			      <0x49022000 0xff>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 17 0x4>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "common";
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
@@ -486,7 +482,7 @@
 			reg = <0x40124000 0xff>, /* MPU private access */
 			      <0x49024000 0xff>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 22 0x4>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "common";
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
@@ -500,7 +496,7 @@
 			reg = <0x40126000 0xff>, /* MPU private access */
 			      <0x49026000 0xff>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "common";
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
@@ -512,7 +508,7 @@
 		timer1: timer@4ae18000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x4ae18000 0x80>;
-			interrupts = <0 37 0x4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 		};
@@ -520,21 +516,21 @@
 		timer2: timer@48032000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x48032000 0x80>;
-			interrupts = <0 38 0x4>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer2";
 		};
 
 		timer3: timer@48034000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x48034000 0x80>;
-			interrupts = <0 39 0x4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer3";
 		};
 
 		timer4: timer@48036000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x48036000 0x80>;
-			interrupts = <0 40 0x4>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer4";
 		};
 
@@ -542,7 +538,7 @@
 			compatible = "ti,omap5430-timer";
 			reg = <0x40138000 0x80>,
 			      <0x49038000 0x80>;
-			interrupts = <0 41 0x4>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer5";
 			ti,timer-dsp;
 			ti,timer-pwm;
@@ -552,7 +548,7 @@
 			compatible = "ti,omap5430-timer";
 			reg = <0x4013a000 0x80>,
 			      <0x4903a000 0x80>;
-			interrupts = <0 42 0x4>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer6";
 			ti,timer-dsp;
 			ti,timer-pwm;
@@ -562,7 +558,7 @@
 			compatible = "ti,omap5430-timer";
 			reg = <0x4013c000 0x80>,
 			      <0x4903c000 0x80>;
-			interrupts = <0 43 0x4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer7";
 			ti,timer-dsp;
 		};
@@ -571,7 +567,7 @@
 			compatible = "ti,omap5430-timer";
 			reg = <0x4013e000 0x80>,
 			      <0x4903e000 0x80>;
-			interrupts = <0 44 0x4>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer8";
 			ti,timer-dsp;
 			ti,timer-pwm;
@@ -580,7 +576,7 @@
 		timer9: timer@4803e000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x4803e000 0x80>;
-			interrupts = <0 45 0x4>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer9";
 			ti,timer-pwm;
 		};
@@ -588,7 +584,7 @@
 		timer10: timer@48086000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x48086000 0x80>;
-			interrupts = <0 46 0x4>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer10";
 			ti,timer-pwm;
 		};
@@ -596,7 +592,7 @@
 		timer11: timer@48088000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x48088000 0x80>;
-			interrupts = <0 47 0x4>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer11";
 			ti,timer-pwm;
 		};
@@ -604,7 +600,7 @@
 		wdt2: wdt@4ae14000 {
 			compatible = "ti,omap5-wdt", "ti,omap3-wdt";
 			reg = <0x4ae14000 0x80>;
-			interrupts = <0 80 0x4>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "wd_timer2";
 		};
 
@@ -613,7 +609,7 @@
 			ti,hwmods	= "emif1";
 			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
 			reg = <0x4c000000 0x400>;
-			interrupts = <0 110 0x4>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			hw-caps-read-idle-ctrl;
 			hw-caps-ll-interface;
 			hw-caps-temp-alert;
@@ -624,7 +620,7 @@
 			ti,hwmods	= "emif2";
 			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
 			reg = <0x4d000000 0x400>;
-			interrupts = <0 111 0x4>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			hw-caps-read-idle-ctrl;
 			hw-caps-ll-interface;
 			hw-caps-temp-alert;
@@ -642,7 +638,7 @@
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss";
 			reg = <0x4a020000 0x1000>;
-			interrupts = <0 93 4>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			utmi-mode = <2>;
@@ -650,7 +646,7 @@
 			dwc3@4a030000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x4a030000 0x1000>;
-				interrupts = <0 92 4>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 				usb-phy = <&usb2_phy>, <&usb3_phy>;
 				tx-fifo-resize;
 			};
@@ -677,5 +673,44 @@
 				ctrl-module = <&omap_control_usb>;
 			};
 		};
+
+		usbhstll: usbhstll@4a062000 {
+			compatible = "ti,usbhs-tll";
+			reg = <0x4a062000 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "usb_tll_hs";
+		};
+
+		usbhshost: usbhshost@4a064000 {
+			compatible = "ti,usbhs-host";
+			reg = <0x4a064000 0x800>;
+			ti,hwmods = "usb_host_hs";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbhsohci: ohci@4a064800 {
+				compatible = "ti,ohci-omap3", "usb-ohci";
+				reg = <0x4a064800 0x400>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usbhsehci: ehci@4a064c00 {
+				compatible = "ti,ehci-omap", "usb-ehci";
+				reg = <0x4a064c00 0x400>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		bandgap@4a0021e0 {
+			reg = <0x4a0021e0 0xc
+			       0x4a00232c 0xc
+			       0x4a002380 0x2c
+			       0x4a0023C0 0x3c>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			compatible = "ti,omap5430-bandgap";
+		};
 	};
 };