summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/tegra30-beaver.dts
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-09-06 20:26:27 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2013-09-06 20:26:27 (GMT)
commitdccfd1e439c11422d7aca0d834b0430d24650e85 (patch)
treed4bb17a46ced7027775e7c8c835ed7f165e5ebac /arch/arm/boot/dts/tegra30-beaver.dts
parent8e73e367f7dc50f1d1bc22a63e5764bb4eea9b48 (diff)
parent56e9e0f3a3c558b42db2dd5120d3a839e4beb282 (diff)
downloadlinux-fsl-qoriq-dccfd1e439c11422d7aca0d834b0430d24650e85.tar.xz
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC DT updates from Olof Johansson: "Device tree and bindings updates for 3.12. General additions of various on-chip and on-board peripherals on various platforms as support gets added. Some of the bigger changes are: - Addition of (new) PCI-e support on Tegra. - More Tegra4 support, including PMC configuration for Dalmore. - Addition of a new board for Exynos4 (trats2) and more bindings for 4x12 IP. - Addition of Allwinner A20 and A31 SoC and board files. - Move of the ST Ericsson device tree files to now use ste-* prefix. - More move of hardware description of shmobile platforms to DT. - Two new board dts files for Freescale MXs" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits) dts: Rename DW APB timer compatible strings dts: Deprecate ALTR as a vendor prefix of: add vendor prefix for Altera Corp. ARM: at91/dt: sam9x5ek: add sound configuration ARM: at91/dt: sam9x5ek: enable SSC ARM: at91/dt: sam9x5ek: add WM8731 codec ARM: at91/dt: sam9x5: add SSC DMA parameters ARM: at91/dt: add at91rm9200 PQFP package version ARM: at91: at91rm9200: set default mmc0 pinctrl-names ARM: at91: at91sam9n12: correct pin number of gpio-key ARM: at91: at91sam9n12: add qt1070 support ARM: at91: at91sam9n12: add pinctrl of TWI ARM: at91: Add PMU support for sama5d3 ARM: at91: at91sam9260: add missing pinctrl-names on mmc ARM: tegra: configure power off for Dalmore ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) ARM: dts: add sdio blocks to bcm28155-ap board ARM: dts: align sdio numbers to HW definition ARM: sun7i: Add Olimex A20-Olinuxino-Micro support ARM: sun7i: Add Allwinner A20 DTSI ...
Diffstat (limited to 'arch/arm/boot/dts/tegra30-beaver.dts')
-rw-r--r--arch/arm/boot/dts/tegra30-beaver.dts64
1 files changed, 59 insertions, 5 deletions
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 87c5f7b..08cad69 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -10,6 +10,40 @@
reg = <0x80000000 0x7ff00000>;
};
+ pcie-controller {
+ status = "okay";
+ pex-clk-supply = <&sys_3v3_pexs_reg>;
+ vdd-supply = <&ldo1_reg>;
+ avdd-supply = <&ldo2_reg>;
+
+ pci@1,0 {
+ status = "okay";
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@3,0 {
+ status = "okay";
+ nvidia,num-lanes = <2>;
+ };
+ };
+
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&sys_3v3_reg>;
+ pll-supply = <&vio_reg>;
+
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ nvidia,ddc-i2c-bus = <&hdmiddc>;
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -76,6 +110,11 @@
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
+ pex_l1_prsnt_n_pdd4 {
+ nvidia,pins = "pex_l1_prsnt_n_pdd4",
+ "pex_l1_clkreq_n_pdd6";
+ nvidia,pull = <2>;
+ };
sdio3 {
nvidia,pins = "drive_sdio3";
nvidia,high-speed-mode = <0>;
@@ -85,6 +124,10 @@
nvidia,slew-rate-rising = <1>;
nvidia,slew-rate-falling = <1>;
};
+ gpv {
+ nvidia,pins = "drive_gpv";
+ nvidia,pull-up-strength = <16>;
+ };
};
};
@@ -107,7 +150,7 @@
clock-frequency = <100000>;
};
- i2c@7000c700 {
+ hdmiddc: i2c@7000c700 {
status = "okay";
clock-frequency = <100000>;
};
@@ -262,7 +305,7 @@
pmc {
status = "okay";
nvidia,invert-interrupt;
- nvidia,suspend-mode = <2>;
+ nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <200>;
nvidia,core-pwr-good-time = <3845 3845>;
@@ -285,6 +328,15 @@
non-removable;
};
+ usb@7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ vbus-supply = <&usb3_vbus_reg>;
+ status = "okay";
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@@ -357,7 +409,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};
@@ -369,7 +421,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};
@@ -421,7 +473,9 @@
nvidia,audio-routing =
"Headphones", "HPOR",
- "Headphones", "HPOL";
+ "Headphones", "HPOL",
+ "Mic Jack", "MICBIAS1",
+ "IN2P", "Mic Jack";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&rt5640>;