Merge branch 'ux500-devicetree-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

Linus Walleij <linus.walleij@linaro.org> writes:

  this pull request contains some device tree work by Lee Jones.
  I have tried to keep these patches in the arch/arm/boot/dts/*
  space to get some sanity in the branch proliferation.

  There is still one patch that touches arch/arm/mach-ux500 too
  though (but it should merge fine with the other ux500 stuff).

  The changes to the device tree are of course dependent on some
  core changes and some patching in the GPIO/pin driver, but as
  the device tree files are believed to be a different world
  (and should one day live in their own git) I split this off
  anyway. I don't think people bisect the device trees per se
  and the board code in conjunction anyway.

* 'ux500-devicetree-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: Configure the PRCMU Timer for db8500 based devices in DT
  ARM: ux500: Enable the SMSC9115 on Snowball via Device Tree
  drivers/gpio: represent gpio-nomadik as an IRQ controller in DT documentation
  ARM: ux500: Rename gpio_keys in the Device Tree file
  drivers/gpio: gpio-nomadik: Provide documentation for Device Tree bindings
  drivers/gpio: gpio-nomadik: Device Tree bindings
  ARM: ux500: Enable the external bus with Device Tree
  ARM: ux500: Shorten Snowball's DT compatible gpio entry
  ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[olof: rebuilt branch due to drop of an early merge]
Signed-off-by: Olof Johansson <olof@lixom.net>

2 files changed, 69 insertions, 34 deletions

diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
index 14bc307..881bc39 100644
--- a/arch/arm/boot/dts/db8500.dtsi
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -55,83 +55,101 @@
 
 		gpio0: gpio@8012e000 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8012e000 0x80>;
 			interrupts = <0 119 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <0>;
 		};
 
 		gpio1: gpio@8012e080 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8012e080 0x80>;
 			interrupts = <0 120 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <1>;
 		};
 
 		gpio2: gpio@8000e000 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8000e000 0x80>;
 			interrupts = <0 121 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <2>;
 		};
 
 		gpio3: gpio@8000e080 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8000e080 0x80>;
 			interrupts = <0 122 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <3>;
 		};
 
 		gpio4: gpio@8000e100 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8000e100 0x80>;
 			interrupts = <0 123 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <4>;
 		};
 
 		gpio5: gpio@8000e180 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8000e180 0x80>;
 			interrupts = <0 124 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <5>;
 		};
 
 		gpio6: gpio@8011e000 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8011e000 0x80>;
 			interrupts = <0 125 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <6>;
 		};
 
 		gpio7: gpio@8011e080 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8011e080 0x80>;
 			interrupts = <0 126 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <7>;
 		};
 
 		gpio8: gpio@a03fe000 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0xa03fe000 0x80>;
 			interrupts = <0 127 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <8>;
 		};
 
 		usb@a03e0000 {
@@ -153,7 +171,13 @@
 			reg = <0x80157000 0x1000>;
 			interrupts = <46 47>;
 			#address-cells = <1>;
-			#size-cells = <0>;
+			#size-cells = <1>;
+			ranges;
+
+				prcmu-timer-4@80157450 {
+				compatible = "stericsson,db8500-prcmu-timer-4";
+				reg = <0x80157450 0xC>;
+			};
 
 			ab8500@5 {
 				compatible = "stericsson,ab8500";
@@ -163,7 +187,7 @@
 		};
 
 		i2c@80004000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80004000 0x1000>;
 			interrupts = <0 21 0x4>;
 			#address-cells = <1>;
@@ -171,7 +195,7 @@
 		};
 
 		i2c@80122000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80122000 0x1000>;
 			interrupts = <0 22 0x4>;
 			#address-cells = <1>;
@@ -179,7 +203,7 @@
 		};
 
 		i2c@80128000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80128000 0x1000>;
 			interrupts = <0 55 0x4>;
 			#address-cells = <1>;
@@ -187,7 +211,7 @@
 		};
 
 		i2c@80110000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80110000 0x1000>;
 			interrupts = <0 12 0x4>;
 			#address-cells = <1>;
@@ -195,7 +219,7 @@
 		};
 
 		i2c@8012a000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x8012a000 0x1000>;
 			interrupts = <0 51 0x4>;
 			#address-cells = <1>;
@@ -270,5 +294,14 @@
 			interrupts = <0 100 0x4>;
 			status = "disabled";
 		};
+
+		external-bus@50000000 {
+			compatible = "simple-bus";
+			reg = <0x50000000 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x4000000>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 359c6d6..d99dc04 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -30,35 +30,35 @@
 			wakeup = <1>;
 			linux,code = <2>;
 			label = "userpb";
-			gpios = <&gpio1 0>;
+			gpios = <&gpio1 0 0>;
 		};
 		button@2 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <3>;
-			label = "userpb";
-			gpios = <&gpio4 23>;
+			label = "extkb1";
+			gpios = <&gpio4 23 0>;
 		};
 		button@3 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <4>;
-			label = "userpb";
-			gpios = <&gpio4 23>;
+			label = "extkb2";
+			gpios = <&gpio4 24 0>;
 		};
 		button@4 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <5>;
-			label = "userpb";
-			gpios = <&gpio5 1>;
+			label = "extkb3";
+			gpios = <&gpio5 1 0>;
 		};
 		button@5 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <6>;
-			label = "userpb";
-			gpios = <&gpio5 2>;
+			label = "extkb4";
+			gpios = <&gpio5 2 0>;
 		};
 	};
 
@@ -73,17 +73,19 @@
 	soc-u9500 {
 
 		external-bus@50000000 {
-			compatible = "simple-bus";
-			reg = <0x50000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			ethernet@50000000 {
-				compatible = "smsc,9111";
-				reg = <0x50000000 0x10000>;
-				interrupts = <12>;
+			status = "okay";
+
+			ethernet@0 {
+				compatible = "smsc,lan9115";
+				reg = <0 0x10000>;
+				interrupts = <12 0x1>;
 				interrupt-parent = <&gpio4>;
+
+				reg-shift = <1>;
+				reg-io-width = <2>;
+				smsc,force-internal-phy;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
 			};
 		};