Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull first batch of arm-soc cleanups from Olof Johansson:
 "These cleanups are basically all over the place.  The idea is to
  collect changes with minimal impact but large number of changes so we
  can avoid them from distracting in the diffstat in the other series.

  A significant number of lines get removed here, in particular because
  the ixp2000 and ixp23xx platforms get removed.  These have never been
  extremely popular and have fallen into disuse over time with no active
  maintainer taking care of them.  The u5500 soc never made it into a
  product, so we are removing it from the ux500 platform.

  Many good cleanups also went into the at91 and omap platforms, as has
  been the case for a number of releases."

Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx}

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits)
  ARM: clps711x: Cleanup IRQ handling
  ARM clps711x: Removed unused header mach/time.h
  ARM: clps711x: Added note about support EP731x CPU to Kconfig
  ARM: clps711x: Added missing register definitions
  ARM: clps711x: Used own subarch directory for store header file
  Dove: Fix Section mismatch warnings
  ARM: orion5x: ts78xx debugging changes
  ARM: orion5x: remove PM dependency from ts78xx
  ARM: orion5x: ts78xx fix NAND resource off by one
  ARM: orion5x: ts78xx whitespace cleanups
  Orion5x: Fix Section mismatch warnings
  Orion5x: Fix warning: struct pci_dev declared inside paramter list
  ARM: clps711x: Combine header files into one for clps711x-targets
  ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c
  ARM: S3C24XX: Use common macro to define resources on mach-osiris.c
  ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable
  ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c
  ARM: S5PV210: Use common macro to define resources on dev-audio.c
  ARM: S5PC100: Use common macro to define resources on dev-audio.c
  ARM: S5P64X0: Use common macro to define resources on dev-audio.c
  ...

1 files changed, 89 insertions, 97 deletions

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 45db05d..98a42f3 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -9,15 +9,6 @@ config HAVE_AT91_DBGU0
 config HAVE_AT91_DBGU1
 	bool
 
-config HAVE_AT91_USART3
-	bool
-
-config HAVE_AT91_USART4
-	bool
-
-config HAVE_AT91_USART5
-	bool
-
 config AT91_SAM9_ALT_RESET
 	bool
 	default !ARCH_AT91X40
@@ -26,87 +17,121 @@ config AT91_SAM9G45_RESET
 	bool
 	default !ARCH_AT91X40
 
+config SOC_AT91SAM9
+	bool
+	select GENERIC_CLOCKEVENTS
+	select CPU_ARM926T
+
 menu "Atmel AT91 System-on-Chip"
 
-choice
-	prompt "Atmel AT91 Processor"
+comment "Atmel AT91 Processor"
 
-config ARCH_AT91RM9200
+config SOC_AT91SAM9
+	bool
+	select CPU_ARM926T
+	select AT91_SAM9_TIME
+	select AT91_SAM9_SMC
+
+config SOC_AT91RM9200
 	bool "AT91RM9200"
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
 
-config ARCH_AT91SAM9260
-	bool "AT91SAM9260 or AT91SAM9XE"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9260
+	bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
+	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
-	select HAVE_AT91_USART4
-	select HAVE_AT91_USART5
 	select HAVE_NET_MACB
+	help
+	  Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
+	  or AT91SAM9G20 SoC.
 
-config ARCH_AT91SAM9261
-	bool "AT91SAM9261"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9261
+	bool "AT91SAM9261 or AT91SAM9G10"
+	select SOC_AT91SAM9
+	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	help
+	  Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
+
+config SOC_AT91SAM9263
+	bool "AT91SAM9263"
+	select SOC_AT91SAM9
+	select HAVE_AT91_DBGU1
+	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
+
+config SOC_AT91SAM9RL
+	bool "AT91SAM9RL"
+	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
+	select HAVE_FB_ATMEL
 
-config ARCH_AT91SAM9G10
-	bool "AT91SAM9G10"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9G45
+	bool "AT91SAM9G45 or AT91SAM9M10 families"
+	select SOC_AT91SAM9
+	select HAVE_AT91_DBGU1
+	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
+	help
+	  Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
+	  This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+
+config SOC_AT91SAM9X5
+	bool "AT91SAM9x5 family"
+	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
+	help
+	  Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
+	  This means that your SAM9 name finishes with a '5' (except if it is
+	  AT91SAM9G45!).
+	  This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35
+	  and AT91SAM9X35.
+
+choice
+	prompt "Atmel AT91 Processor Devices for non DT boards"
+
+config ARCH_AT91_NONE
+	bool "None"
+
+config ARCH_AT91RM9200
+	bool "AT91RM9200"
+	select SOC_AT91RM9200
+
+config ARCH_AT91SAM9260
+	bool "AT91SAM9260 or AT91SAM9XE"
+	select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9261
+	bool "AT91SAM9261"
+	select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9G10
+	bool "AT91SAM9G10"
+	select SOC_AT91SAM9261
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU1
+	select SOC_AT91SAM9263
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_USART3
-	select HAVE_FB_ATMEL
-	select HAVE_AT91_DBGU0
+	select SOC_AT91SAM9RL
 
 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
-	select HAVE_AT91_USART4
-	select HAVE_AT91_USART5
-	select HAVE_NET_MACB
+	select SOC_AT91SAM9260
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_USART3
-	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU1
-
-config ARCH_AT91SAM9X5
-	bool "AT91SAM9x5 family"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU0
+	select SOC_AT91SAM9G45
 
 config ARCH_AT91X40
 	bool "AT91x40"
+	depends on !MMU
 	select ARCH_USES_GETTIMEOFFSET
 
 endchoice
@@ -364,6 +389,7 @@ config MACH_AT91SAM9G20EK_2MMC
 	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
 	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
 	  onwards.
+	  <http://www.atmel.com/tools/SAM9G20-EK.aspx>
 
 config MACH_CPU9G20
 	bool "Eukrea CPU9G20 board"
@@ -433,9 +459,10 @@ comment "AT91SAM9G45 Board Type"
 config MACH_AT91SAM9M10G45EK
 	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
 	help
-	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
-	  "ES" at the end of the name means that this board is an
-	  Engineering Sample.
+	  Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
+	  Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
+	  families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+	  <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
 
 endif
 
@@ -515,41 +542,6 @@ config AT91_TIMER_HZ
 	  system clock (of at least several MHz), rounding is less of a
 	  problem so it can be safer to use a decimal values like 100.
 
-choice
-	prompt "Select a UART for early kernel messages"
-
-config AT91_EARLY_DBGU0
-	bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl"
-	depends on HAVE_AT91_DBGU0
-
-config AT91_EARLY_DBGU1
-	bool "DBGU on 9263 and 9g45"
-	depends on HAVE_AT91_DBGU1
-
-config AT91_EARLY_USART0
-	bool "USART0"
-
-config AT91_EARLY_USART1
-	bool "USART1"
-
-config AT91_EARLY_USART2
-	bool "USART2"
-	depends on ! ARCH_AT91X40
-
-config AT91_EARLY_USART3
-	bool "USART3"
-	depends on HAVE_AT91_USART3
-
-config AT91_EARLY_USART4
-	bool "USART4"
-	depends on HAVE_AT91_USART4
-
-config AT91_EARLY_USART5
-	bool "USART5"
-	depends on HAVE_AT91_USART5
-
-endchoice
-
 endmenu
 
 endif