summaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91/at91sam9260_devices.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-02 01:46:13 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-02 01:46:13 (GMT)
commit8f446a7a069e0af0639385f67c78ee2279bca04c (patch)
tree580cf495616b36ca0af0826afa87c430cdc1e7cb /arch/arm/mach-at91/at91sam9260_devices.c
parent84be4ae2c038e2b03d650cbf2a7cfd9e8d6e9e51 (diff)
parent04ef037c926ddb31088c976538e29eada4fd1490 (diff)
downloadlinux-fsl-qoriq-8f446a7a069e0af0639385f67c78ee2279bca04c.tar.xz
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
Diffstat (limited to 'arch/arm/mach-at91/at91sam9260_devices.c')
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c84
1 files changed, 1 insertions, 83 deletions
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index bce572a..af50ff3 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -209,92 +209,10 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {}
/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_MCI,
- .end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_mmc_device = {
- .name = "at91_mci",
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
- .num_resources = ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
- if (!data)
- return;
-
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA8, 0);
-
- if (data->slot_b) {
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PA5, 1);
- at91_set_B_periph(AT91_PIN_PA4, 1);
- at91_set_B_periph(AT91_PIN_PA3, 1);
- }
- } else {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA7, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA6, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA9, 1);
- at91_set_A_periph(AT91_PIN_PA10, 1);
- at91_set_A_periph(AT91_PIN_PA11, 1);
- }
- }
-
- mmc_data = *data;
- platform_device_register(&at91sam9260_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
* MMC / SD Slot for Atmel MCI Driver
* -------------------------------------------------------------------- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct mci_platform_data mmc_data;