Merge branch 'samsung/driver' into next/drivers

Conflicts:
	arch/arm/mach-mxs/include/mach/common.h

Pull in previous samsung conflict merges and do a trivial
merge of an mxs double-add conflict.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

4 files changed, 1 insertions, 109 deletions

diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S
index d7dfcd7..3ba4f54 100644
--- a/arch/arm/mach-exynos/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos/include/mach/entry-macro.S
@@ -9,82 +9,8 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/hardware/gic.h>
-
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\tmp, #0
-
-		mrc	p15, 0, \base, c0, c0, 5
-		and	\base, \base, #3
-		cmp	\base, #0
-		beq	1f
-
-		ldr	\tmp, =gic_bank_offset
-		ldr	\tmp, [\tmp]
-		cmp	\base, #1
-		beq	1f
-
-		cmp	\base, #2
-		addeq	\tmp, \tmp, \tmp
-		addne	\tmp, \tmp, \tmp, LSL #1
-
-1:		ldr	\base, =gic_cpu_base_addr
-		ldr	\base, [\base]
-		add	\base, \base, \tmp
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an interrupt if it's
-		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
-		 *
-		 * A simple read from the controller will tell us the number of the highest
-                 * priority enabled interrupt.  We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
-		ldr	\tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #15
-		cmpcc	\irqnr, \irqnr
-		cmpne	\irqnr, \tmp
-		cmpcs	\irqnr, \irqnr
-
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt on the
-		 * controller, since this requires the original irqstat value which
-		 * we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		cmpcs	\irqnr, \irqnr
-		.endm
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 05ff187..c754a22 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -157,7 +157,6 @@
 #define S3C_PA_SPI1			EXYNOS4_PA_SPI1
 #define S3C_PA_SPI2			EXYNOS4_PA_SPI2
 
-#define S5P_PA_CHIPID			EXYNOS4_PA_CHIPID
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 #define S5P_PA_FIMC0			EXYNOS4_PA_FIMC0
 #define S5P_PA_FIMC1			EXYNOS4_PA_FIMC1
@@ -174,26 +173,17 @@
 #define S5P_PA_ONENAND_DMA		EXYNOS4_PA_ONENAND_DMA
 #define S5P_PA_SDO			EXYNOS4_PA_SDO
 #define S5P_PA_SDRAM			EXYNOS4_PA_SDRAM
-#define S5P_PA_SROMC			EXYNOS4_PA_SROMC
-#define S5P_PA_SYSCON			EXYNOS4_PA_SYSCON
-#define S5P_PA_TIMER			EXYNOS4_PA_TIMER
 #define S5P_PA_VP			EXYNOS4_PA_VP
 
 #define SAMSUNG_PA_ADC			EXYNOS4_PA_ADC
 #define SAMSUNG_PA_ADC1			EXYNOS4_PA_ADC1
 #define SAMSUNG_PA_KEYPAD		EXYNOS4_PA_KEYPAD
 
-#define EXYNOS_PA_COMBINER		EXYNOS4_PA_COMBINER
-#define EXYNOS_PA_GIC_CPU		EXYNOS4_PA_GIC_CPU
-#define EXYNOS_PA_GIC_DIST		EXYNOS4_PA_GIC_DIST
-#define EXYNOS_PA_PMU			EXYNOS4_PA_PMU
-#define EXYNOS_PA_SYSTIMER		EXYNOS4_PA_SYSTIMER
-
 /* Compatibility UART */
 
 #define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
-#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART(x)			(EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
 #define S5P_PA_UART0			S5P_PA_UART(0)
 #define S5P_PA_UART1			S5P_PA_UART(1)
 #define S5P_PA_UART2			S5P_PA_UART(2)
diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
index 5e3220c..0063a6d 100644
--- a/arch/arm/mach-exynos/include/mach/system.h
+++ b/arch/arm/mach-exynos/include/mach/system.h
@@ -13,8 +13,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-#include <plat/system-reset.h>
-
 static void arch_idle(void)
 {
 	/* nothing here yet */
diff --git a/arch/arm/mach-exynos/include/mach/vmalloc.h b/arch/arm/mach-exynos/include/mach/vmalloc.h
deleted file mode 100644
index 284330e..0000000
--- a/arch/arm/mach-exynos/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EXYNOS4 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H __FILE__
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */