Merge branch 'v3.5-for-usb' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into usb-next

8 files changed, 108 insertions, 31 deletions

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index e81c35f..a6a6a94 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -232,6 +232,9 @@ config MACH_ARMLEX4210
 config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
 	select CPU_EXYNOS4210
+	select S5P_HRT
+	select CLKSRC_MMIO
+	select HAVE_SCHED_CLOCK
 	select S5P_GPIO_INT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
@@ -247,6 +250,7 @@ config MACH_UNIVERSAL_C210
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
@@ -259,6 +263,7 @@ config MACH_UNIVERSAL_C210
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_FIMC
 	select S5P_SETUP_MIPIPHY
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -277,6 +282,7 @@ config MACH_NURI
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
 	select S3C_DEV_I2C6
+	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_CSIS0
 	select S5P_DEV_JPEG
 	select S5P_DEV_FIMC0
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index 5cd7a8b..7ac6ff4 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -678,7 +678,7 @@ static struct clk exynos5_clk_pdma1 = {
 	.name		= "dma",
 	.devname	= "dma-pl330.1",
 	.enable		= exynos5_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 1),
+	.ctrlbit	= (1 << 2),
 };
 
 static struct clk exynos5_clk_mdma1 = {
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 591e785..c02dae7 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -189,6 +189,7 @@
 #define IRQ_IIC7			EXYNOS4_IRQ_IIC7
 
 #define IRQ_USB_HOST			EXYNOS4_IRQ_USB_HOST
+#define IRQ_OTG				EXYNOS4_IRQ_USB_HSOTG
 
 #define IRQ_HSMMC0			EXYNOS4_IRQ_HSMMC0
 #define IRQ_HSMMC1			EXYNOS4_IRQ_HSMMC1
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 6e6d11f..e009a66 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -130,6 +130,9 @@
 #define EXYNOS4_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
 #define EXYNOS4_PA_DWMCI		0x12550000
 
+#define EXYNOS4_PA_HSOTG		0x12480000
+#define EXYNOS4_PA_USB_HSPHY		0x125B0000
+
 #define EXYNOS4_PA_SATA			0x12560000
 #define EXYNOS4_PA_SATAPHY		0x125D0000
 #define EXYNOS4_PA_SATAPHY_CTRL		0x126B0000
@@ -186,6 +189,7 @@
 #define S3C_PA_SPI0			EXYNOS4_PA_SPI0
 #define S3C_PA_SPI1			EXYNOS4_PA_SPI1
 #define S3C_PA_SPI2			EXYNOS4_PA_SPI2
+#define S3C_PA_USB_HSOTG		EXYNOS4_PA_HSOTG
 
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 #define S5P_PA_FIMC0			EXYNOS4_PA_FIMC0
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 4c53f38..d457d05 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -163,6 +163,9 @@
 #define S5P_CHECK_SLEEP				0x00000BAD
 
 /* Only for EXYNOS4210 */
+#define S5P_USBDEVICE_PHY_CONTROL	S5P_PMUREG(0x0704)
+#define S5P_USBDEVICE_PHY_ENABLE	(1 << 0)
+
 #define S5P_USBHOST_PHY_CONTROL		S5P_PMUREG(0x0708)
 #define S5P_USBHOST_PHY_ENABLE		(1 << 0)
 
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 2c6d701..a60269d 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -352,6 +352,7 @@ static struct regulator_consumer_supply __initdata max8997_ldo1_[] = {
 	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
+	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* USB */
 	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
@@ -367,7 +368,7 @@ static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
 	REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo8_[] = {
-	REGULATOR_SUPPLY("vusb_d", NULL), /* Used by CPU */
+	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* USB */
 	REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo11_[] = {
@@ -823,6 +824,7 @@ static struct regulator_init_data __initdata max8997_esafeout1_data = {
 	.constraints	= {
 		.name		= "SAFEOUT1",
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.always_on	= 1,
 		.state_mem	= {
 			.disabled	= 1,
 		},
@@ -1080,6 +1082,9 @@ static void __init nuri_ehci_init(void)
 	s5p_ehci_set_platdata(pdata);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat nuri_hsotg_pdata;
+
 /* CAMERA */
 static struct regulator_consumer_supply cam_vt_cam15_supply =
 	REGULATOR_SUPPLY("vdd_core", "6-003c");
@@ -1292,6 +1297,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&s5p_device_fimc_md,
+	&s3c_device_usb_hsotg,
 
 	/* NURI Devices */
 	&nuri_gpio_keys,
@@ -1340,6 +1346,7 @@ static void __init nuri_machine_init(void)
 	nuri_camera_init();
 
 	nuri_ehci_init();
+	s3c_hsotg_set_platdata(&nuri_hsotg_pdata);
 
 	/* Last */
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index bc8bf3b..9be8a07 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -41,6 +41,7 @@
 #include <plat/pd.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/fimc-core.h>
+#include <plat/s5p-time.h>
 #include <plat/camport.h>
 #include <plat/mipi_csis.h>
 
@@ -205,6 +206,7 @@ static struct regulator_init_data lp3974_ldo2_data = {
 };
 
 static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
+	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
 	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
 	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
 	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
@@ -290,6 +292,7 @@ static struct regulator_init_data lp3974_ldo7_data = {
 };
 
 static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
+	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
 	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
 };
 
@@ -486,7 +489,10 @@ static struct regulator_init_data lp3974_vichg_data = {
 static struct regulator_init_data lp3974_esafeout1_data = {
 	.constraints	= {
 		.name		= "SAFEOUT1",
+		.min_uV		= 4800000,
+		.max_uV		= 4800000,
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.always_on	= 1,
 		.state_mem	= {
 			.enabled	= 1,
 		},
@@ -994,6 +1000,9 @@ static struct gpio universal_camera_gpios[] = {
 	{ GPIO_CAM_VGA_NSTBY,	GPIOF_OUT_INIT_LOW,  "CAM_VGA_NSTBY" },
 };
 
+/* USB OTG */
+static struct s3c_hsotg_plat universal_hsotg_pdata;
+
 static void __init universal_camera_init(void)
 {
 	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
@@ -1049,6 +1058,7 @@ static struct platform_device *universal_devices[] __initdata = {
 	&s5p_device_onenand,
 	&s5p_device_fimd0,
 	&s5p_device_jpeg,
+	&s3c_device_usb_hsotg,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
@@ -1064,6 +1074,7 @@ static void __init universal_map_io(void)
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
+	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
 }
 
 static void s5p_tv_setup(void)
@@ -1101,6 +1112,7 @@ static void __init universal_machine_init(void)
 	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
 			ARRAY_SIZE(i2c_gpio12_devs));
 
+	s3c_hsotg_set_platdata(&universal_hsotg_pdata);
 	universal_camera_init();
 
 	/* Last */
@@ -1114,7 +1126,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.map_io		= universal_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= universal_machine_init,
-	.timer		= &exynos4_timer,
+	.timer		= &s5p_timer,
 	.reserve        = &universal_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
index 41743d2..1af0a7f 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -26,11 +26,71 @@ static int exynos4_usb_host_phy_is_on(void)
 	return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1;
 }
 
-static int exynos4_usb_phy1_init(struct platform_device *pdev)
+static void exynos4210_usb_phy_clkset(struct platform_device *pdev)
 {
-	struct clk *otg_clk;
 	struct clk *xusbxti_clk;
 	u32 phyclk;
+
+	/* set clock frequency for PLL */
+	phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK;
+
+	xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
+	if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
+		switch (clk_get_rate(xusbxti_clk)) {
+		case 12 * MHZ:
+			phyclk |= CLKSEL_12M;
+			break;
+		case 24 * MHZ:
+			phyclk |= CLKSEL_24M;
+			break;
+		default:
+		case 48 * MHZ:
+			/* default reference clock */
+			break;
+		}
+		clk_put(xusbxti_clk);
+	}
+
+	writel(phyclk, EXYNOS4_PHYCLK);
+}
+
+static int exynos4210_usb_phy0_init(struct platform_device *pdev)
+{
+	u32 rstcon;
+
+	writel(readl(S5P_USBDEVICE_PHY_CONTROL) | S5P_USBDEVICE_PHY_ENABLE,
+			S5P_USBDEVICE_PHY_CONTROL);
+
+	exynos4210_usb_phy_clkset(pdev);
+
+	/* set to normal PHY0 */
+	writel((readl(EXYNOS4_PHYPWR) & ~PHY0_NORMAL_MASK), EXYNOS4_PHYPWR);
+
+	/* reset PHY0 and Link */
+	rstcon = readl(EXYNOS4_RSTCON) | PHY0_SWRST_MASK;
+	writel(rstcon, EXYNOS4_RSTCON);
+	udelay(10);
+
+	rstcon &= ~PHY0_SWRST_MASK;
+	writel(rstcon, EXYNOS4_RSTCON);
+
+	return 0;
+}
+
+static int exynos4210_usb_phy0_exit(struct platform_device *pdev)
+{
+	writel((readl(EXYNOS4_PHYPWR) | PHY0_ANALOG_POWERDOWN |
+				PHY0_OTG_DISABLE), EXYNOS4_PHYPWR);
+
+	writel(readl(S5P_USBDEVICE_PHY_CONTROL) & ~S5P_USBDEVICE_PHY_ENABLE,
+			S5P_USBDEVICE_PHY_CONTROL);
+
+	return 0;
+}
+
+static int exynos4210_usb_phy1_init(struct platform_device *pdev)
+{
+	struct clk *otg_clk;
 	u32 rstcon;
 	int err;
 
@@ -54,27 +114,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev)
 	writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE,
 			S5P_USBHOST_PHY_CONTROL);
 
-	/* set clock frequency for PLL */
-	phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK;
-
-	xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
-	if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
-		switch (clk_get_rate(xusbxti_clk)) {
-		case 12 * MHZ:
-			phyclk |= CLKSEL_12M;
-			break;
-		case 24 * MHZ:
-			phyclk |= CLKSEL_24M;
-			break;
-		default:
-		case 48 * MHZ:
-			/* default reference clock */
-			break;
-		}
-		clk_put(xusbxti_clk);
-	}
-
-	writel(phyclk, EXYNOS4_PHYCLK);
+	exynos4210_usb_phy_clkset(pdev);
 
 	/* floating prevention logic: disable */
 	writel((readl(EXYNOS4_PHY1CON) | FPENABLEN), EXYNOS4_PHY1CON);
@@ -102,7 +142,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev)
 	return 0;
 }
 
-static int exynos4_usb_phy1_exit(struct platform_device *pdev)
+static int exynos4210_usb_phy1_exit(struct platform_device *pdev)
 {
 	struct clk *otg_clk;
 	int err;
@@ -136,16 +176,20 @@ static int exynos4_usb_phy1_exit(struct platform_device *pdev)
 
 int s5p_usb_phy_init(struct platform_device *pdev, int type)
 {
-	if (type == S5P_USB_PHY_HOST)
-		return exynos4_usb_phy1_init(pdev);
+	if (type == S5P_USB_PHY_DEVICE)
+		return exynos4210_usb_phy0_init(pdev);
+	else if (type == S5P_USB_PHY_HOST)
+		return exynos4210_usb_phy1_init(pdev);
 
 	return -EINVAL;
 }
 
 int s5p_usb_phy_exit(struct platform_device *pdev, int type)
 {
-	if (type == S5P_USB_PHY_HOST)
-		return exynos4_usb_phy1_exit(pdev);
+	if (type == S5P_USB_PHY_DEVICE)
+		return exynos4210_usb_phy0_exit(pdev);
+	else if (type == S5P_USB_PHY_HOST)
+		return exynos4210_usb_phy1_exit(pdev);
 
 	return -EINVAL;
 }