Merge tag 'v3.3' into staging/for_v3.4

* tag 'v3.3': (1646 commits)
  Linux 3.3
  Don't limit non-nested epoll paths
  netfilter: ctnetlink: fix race between delete and timeout expiration
  ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu.
  nilfs2: fix NULL pointer dereference in nilfs_load_super_block()
  nilfs2: clamp ns_r_segments_percentage to [1, 99]
  afs: Remote abort can cause BUG in rxrpc code
  afs: Read of file returns EBADMSG
  C6X: remove dead code from entry.S
  wimax/i2400m: fix erroneous NETDEV_TX_BUSY use
  net/hyperv: fix erroneous NETDEV_TX_BUSY use
  net/usbnet: reserve headroom on rx skbs
  bnx2x: fix memory leak in bnx2x_init_firmware()
  bnx2x: fix a crash on corrupt firmware file
  sch_sfq: revert dont put new flow at the end of flows
  ipv6: fix icmp6_dst_alloc()
  MAINTAINERS: Add Serge as maintainer of capabilities
  drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode
  MAINTAINERS: add entry for exynos mipi display drivers
  MAINTAINERS: fix link to Gustavo Padovans tree
  ...

1 files changed, 238 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0e6de36..4defb97 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -22,6 +22,18 @@ config ARCH_MX25
 config MACH_MX27
 	bool
 
+config ARCH_MX5
+	bool
+
+config ARCH_MX50
+	bool
+
+config ARCH_MX51
+	bool
+
+config ARCH_MX53
+	bool
+
 config SOC_IMX1
 	bool
 	select ARCH_MX1
@@ -73,6 +85,31 @@ config SOC_IMX35
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
+config SOC_IMX5
+	select CPU_V7
+	select MXC_TZIC
+	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
+	select ARCH_HAS_CPUFREQ
+	select ARCH_MX5
+	bool
+
+config SOC_IMX50
+	bool
+	select SOC_IMX5
+	select ARCH_MX50
+
+config	SOC_IMX51
+	bool
+	select SOC_IMX5
+	select ARCH_MX5
+	select ARCH_MX51
+
+config	SOC_IMX53
+	bool
+	select SOC_IMX5
+	select ARCH_MX5
+	select ARCH_MX53
 
 if ARCH_IMX_V4_V5
 
@@ -592,6 +629,207 @@ config MACH_VPR200
 	  Include support for VPR200 platform. This includes specific
 	  configurations for the board and its peripherals.
 
+comment "i.MX5 platforms:"
+
+config MACH_MX50_RDP
+	bool "Support MX50 reference design platform"
+	depends on BROKEN
+	select SOC_IMX50
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for MX50 reference design platform (RDP) board. This
+	  includes specific configurations for the board and its peripherals.
+
+comment "i.MX51 machines:"
+
+config MACH_IMX51_DT
+	bool "Support i.MX51 platforms from device tree"
+	select SOC_IMX51
+	select USE_OF
+	select MACH_MX51_BABBAGE
+	help
+	  Include support for Freescale i.MX51 based platforms
+	  using the device tree for discovery
+
+config MACH_MX51_BABBAGE
+	bool "Support MX51 BABBAGE platforms"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for MX51 Babbage platform, also known as MX51EVK in
+	  u-boot. This includes specific configurations for the board and its
+	  peripherals.
+
+config MACH_MX51_3DS
+	bool "Support MX51PDK (3DS)"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_DEBUG_BOARD
+	help
+	  Include support for MX51PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX51
+	bool "Support Eukrea CPUIMX51 module"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for Eukrea CPUIMX51 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51
+	default MACH_EUKREA_MBIMX51_BASEBOARD
+
+config MACH_EUKREA_MBIMX51_BASEBOARD
+	prompt "Eukrea MBIMX51 development board"
+	bool
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX51 evaluation board.
+
+endchoice
+
+config MACH_EUKREA_CPUIMX51SD
+	bool "Support Eukrea CPUIMX51SD module"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for Eukrea CPUIMX51SD platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51SD
+	default MACH_EUKREA_MBIMXSD51_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD51_BASEBOARD
+	prompt "Eukrea MBIMXSD development board"
+	bool
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+config MX51_EFIKA_COMMON
+	bool
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_PATA_IMX
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+
+config MACH_MX51_EFIKAMX
+	bool "Support MX51 Genesi Efika MX nettop"
+	select LEDS_GPIO_REGISTER
+	select MX51_EFIKA_COMMON
+	help
+	  Include support for Genesi Efika MX nettop. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX51_EFIKASB
+	bool "Support MX51 Genesi Efika Smartbook"
+	select LEDS_GPIO_REGISTER
+	select MX51_EFIKA_COMMON
+	help
+	  Include support for Genesi Efika Smartbook. This includes specific
+	  configurations for the board and its peripherals.
+
+comment "i.MX53 machines:"
+
+config MACH_IMX53_DT
+	bool "Support i.MX53 platforms from device tree"
+	select SOC_IMX53
+	select USE_OF
+	select MACH_MX53_ARD
+	select MACH_MX53_EVK
+	select MACH_MX53_LOCO
+	select MACH_MX53_SMD
+	help
+	  Include support for Freescale i.MX53 based platforms
+	  using the device tree for discovery
+
+config MACH_MX53_EVK
+	bool "Support MX53 EVK platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  Include support for MX53 EVK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX53_SMD
+	bool "Support MX53 SMD platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for MX53 SMD platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX53_LOCO
+	bool "Support MX53 LOCO platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select LEDS_GPIO_REGISTER
+	help
+	  Include support for MX53 LOCO platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX53_ARD
+	bool "Support MX53 ARD platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	help
+	  Include support for MX53 ARD platform. This includes specific
+	  configurations for the board and its peripherals.
+
 comment "i.MX6 family:"
 
 config SOC_IMX6Q