Merge commit 'v3.3-rc1' into stable/for-linus-fixes-3.3

* commit 'v3.3-rc1': (9775 commits)
  Linux 3.3-rc1
  x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
  qnx4: don't leak ->BitMap on late failure exits
  qnx4: reduce the insane nesting in qnx4_checkroot()
  qnx4: di_fname is an array, for crying out loud...
  KEYS: Permit key_serial() to be called with a const key pointer
  keys: fix user_defined key sparse messages
  ima: fix cred sparse warning
  uml: fix compile for x86-64
  MPILIB: Add a missing ENOMEM check
  tpm: fix (ACPI S3) suspend regression
  nvme: fix merge error due to change of 'make_request_fn' fn type
  xen: using EXPORT_SYMBOL requires including export.h
  gpio: tps65910: Use correct offset for gpio initialization
  acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
  intel_idle: Split up and provide per CPU initialization func
  ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
  tg3: Fix single-vector MSI-X code
  openvswitch: Fix multipart datapath dumps.
  ipv6: fix per device IP snmp counters
  ...

1 files changed, 63 insertions, 5 deletions

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 8bf5fa3..c257281 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -10,12 +10,17 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/micrel_phy.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
@@ -23,8 +28,57 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 
+void imx6q_restart(char mode, const char *cmd)
+{
+	struct device_node *np;
+	void __iomem *wdog_base;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt");
+	wdog_base = of_iomap(np, 0);
+	if (!wdog_base)
+		goto soft;
+
+	imx_src_prepare_restart();
+
+	/* enable wdog */
+	writew_relaxed(1 << 2, wdog_base);
+	/* write twice to ensure the request will not get ignored */
+	writew_relaxed(1 << 2, wdog_base);
+
+	/* wait for reset to assert ... */
+	mdelay(500);
+
+	pr_err("Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+
+soft:
+	/* we'll take a jump through zero as a poor second */
+	soft_restart(0);
+}
+
+/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
+static int ksz9021rn_phy_fixup(struct phy_device *phydev)
+{
+	/* min rx data delay */
+	phy_write(phydev, 0x0b, 0x8105);
+	phy_write(phydev, 0x0c, 0x0000);
+
+	/* max rx/tx clock delay, min rx/tx control delay */
+	phy_write(phydev, 0x0b, 0x8104);
+	phy_write(phydev, 0x0c, 0xf0f0);
+	phy_write(phydev, 0x0b, 0x104);
+
+	return 0;
+}
+
 static void __init imx6q_init_machine(void)
 {
+	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
+		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+					   ksz9021rn_phy_fixup);
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	imx6q_pm_init();
@@ -34,16 +88,18 @@ static void __init imx6q_map_io(void)
 {
 	imx_lluart_map_io();
 	imx_scu_map_io();
+	imx6q_clock_map_io();
 }
 
-static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+static int __init imx6q_gpio_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 7; /* imx6q gets 7 gpio ports */
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
+	gpio_irq_base -= 32;
 	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
+
+	return 0;
 }
 
 static const struct of_device_id imx6q_irq_match[] __initconst = {
@@ -70,7 +126,8 @@ static struct sys_timer imx6q_timer = {
 };
 
 static const char *imx6q_dt_compat[] __initdata = {
-	"fsl,imx6q-sabreauto",
+	"fsl,imx6q-arm2",
+	"fsl,imx6q-sabrelite",
 	NULL,
 };
 
@@ -81,4 +138,5 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
 	.timer		= &imx6q_timer,
 	.init_machine	= imx6q_init_machine,
 	.dt_compat	= imx6q_dt_compat,
+	.restart	= imx6q_restart,
 MACHINE_END