ARM: imx6q: remove board specific CLKO setup

The CLKO is widely used by imx6q board designs to clock audio codec.
Since most codecs accept 24 MHz frequency, let's initially set up CLKO
with OSC24M (cko <-- cko2 <-- osc).  Then those board specific CLKO
setup for audio codec can be removed.

The board dts files also need an update on cko reference in codec node.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 0 insertions, 69 deletions

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 1e093ab..b605098 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -162,30 +162,6 @@ static int ar8031_phy_fixup(struct phy_device *dev)
 	return 0;
 }
 
-static void __init imx6q_sabrelite_cko1_setup(void)
-{
-	struct clk *cko1_sel, *ahb, *cko1;
-	unsigned long rate;
-
-	cko1_sel = clk_get_sys(NULL, "cko1_sel");
-	ahb = clk_get_sys(NULL, "ahb");
-	cko1 = clk_get_sys(NULL, "cko1");
-	if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
-		pr_err("cko1 setup failed!\n");
-		goto put_clk;
-	}
-	clk_set_parent(cko1_sel, ahb);
-	rate = clk_round_rate(cko1, 16000000);
-	clk_set_rate(cko1, rate);
-put_clk:
-	if (!IS_ERR(cko1_sel))
-		clk_put(cko1_sel);
-	if (!IS_ERR(ahb))
-		clk_put(ahb);
-	if (!IS_ERR(cko1))
-		clk_put(cko1);
-}
-
 #define PHY_ID_AR8031	0x004dd074
 
 static void __init imx6q_enet_phy_init(void)
@@ -200,45 +176,6 @@ static void __init imx6q_enet_phy_init(void)
 	}
 }
 
-static void __init imx6q_sabresd_cko1_setup(void)
-{
-	struct clk *cko1_sel, *pll4, *pll4_post, *cko1;
-	unsigned long rate;
-
-	cko1_sel = clk_get_sys(NULL, "cko1_sel");
-	pll4 = clk_get_sys(NULL, "pll4_audio");
-	pll4_post = clk_get_sys(NULL, "pll4_post_div");
-	cko1 = clk_get_sys(NULL, "cko1");
-	if (IS_ERR(cko1_sel) || IS_ERR(pll4)
-			|| IS_ERR(pll4_post) || IS_ERR(cko1)) {
-		pr_err("cko1 setup failed!\n");
-		goto put_clk;
-	}
-	/*
-	 * Setting pll4 at 768MHz (24MHz * 32)
-	 * So its child clock can get 24MHz easily
-	 */
-	clk_set_rate(pll4, 768000000);
-
-	clk_set_parent(cko1_sel, pll4_post);
-	rate = clk_round_rate(cko1, 24000000);
-	clk_set_rate(cko1, rate);
-put_clk:
-	if (!IS_ERR(cko1_sel))
-		clk_put(cko1_sel);
-	if (!IS_ERR(pll4_post))
-		clk_put(pll4_post);
-	if (!IS_ERR(pll4))
-		clk_put(pll4);
-	if (!IS_ERR(cko1))
-		clk_put(cko1);
-}
-
-static void __init imx6q_sabresd_init(void)
-{
-	imx6q_sabresd_cko1_setup();
-}
-
 static void __init imx6q_1588_init(void)
 {
 	struct regmap *gpr;
@@ -255,12 +192,6 @@ static void __init imx6q_1588_init(void)
 
 static void __init imx6q_init_machine(void)
 {
-	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
-		imx6q_sabrelite_cko1_setup();
-	else if (of_machine_is_compatible("fsl,imx6q-sabresd") ||
-			of_machine_is_compatible("fsl,imx6dl-sabresd"))
-		imx6q_sabresd_init();
-
 	imx6q_enet_phy_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);