Merge branches 'imx/pata' and 'imx/sata' into next/driver

Conflicts:
	arch/arm/mach-mx5/clock-mx51-mx53.c
	arch/arm/mach-mx5/devices-imx53.h

10 files changed, 57 insertions, 14 deletions

diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 7c893fa..68934ea 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
+		.irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index e400b09..11b0ff6 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -369,7 +369,7 @@ static void __init mx51_babbage_init(void)
 					ARRAY_SIZE(mx51babbage_pads));
 
 	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_imx_uart(1, &uart_pdata);
+	imx51_add_imx_uart(1, NULL);
 	imx51_add_imx_uart(2, &uart_pdata);
 
 	babbage_fec_reset();
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index f70700d..551daf8 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -108,9 +108,9 @@ static void __init mx51_efikamx_board_id(void)
 	gpio_request(EFIKAMX_PCBID2, "pcbid2");
 	gpio_direction_input(EFIKAMX_PCBID2);
 
-	id = gpio_get_value(EFIKAMX_PCBID0);
-	id |= gpio_get_value(EFIKAMX_PCBID1) << 1;
-	id |= gpio_get_value(EFIKAMX_PCBID2) << 2;
+	id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
+	id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
+	id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
 
 	switch (id) {
 	case 7:
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 2e4d9d3..8a9bca2 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -156,23 +156,24 @@ static struct gpio_keys_button mx51_efikasb_keys[] = {
 	{
 		.code = KEY_POWER,
 		.gpio = EFIKASB_PWRKEY,
-		.type = EV_PWR,
+		.type = EV_KEY,
 		.desc = "Power Button",
 		.wakeup = 1,
-		.debounce_interval = 10, /* ms */
+		.active_low = 1,
 	},
 	{
 		.code = SW_LID,
 		.gpio = EFIKASB_LID,
 		.type = EV_SW,
 		.desc = "Lid Switch",
+		.active_low = 1,
 	},
 	{
-		/* SW_RFKILLALL vs KEY_RFKILL ? */
-		.code = SW_RFKILL_ALL,
+		.code = KEY_RFKILL,
 		.gpio = EFIKASB_RFKILL,
-		.type = EV_SW,
+		.type = EV_KEY,
 		.desc = "rfkill",
+		.active_low = 1,
 	},
 };
 
@@ -224,8 +225,8 @@ static void __init mx51_efikasb_board_id(void)
 	gpio_request(EFIKASB_PCBID1, "pcb id1");
 	gpio_direction_input(EFIKASB_PCBID1);
 
-	id = gpio_get_value(EFIKASB_PCBID0);
-	id |= gpio_get_value(EFIKASB_PCBID1) << 1;
+	id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
+	id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
 
 	switch (id) {
 	default:
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 76a67c4..ef2039e 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -234,6 +234,7 @@ static void __init mx53_ard_board_init(void)
 	imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
 	imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
 	imx_add_gpio_keys(&ard_button_data);
+	imx53_add_ahci_imx();
 }
 
 static void __init mx53_ard_timer_init(void)
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 4e1d51d..940aac9 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -273,6 +273,7 @@ static void __init mx53_loco_board_init(void)
 	imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
 	imx_add_gpio_keys(&loco_button_data);
 	gpio_led_register_device(-1, &mx53loco_leds_data);
+	imx53_add_ahci_imx();
 }
 
 static void __init mx53_loco_timer_init(void)
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index bc02894..efcab68 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -35,6 +35,7 @@
 #include "devices-imx53.h"
 
 #define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
 
 static iomux_v3_cfg_t mx53_smd_pads[] = {
 	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
@@ -111,6 +112,19 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
+static inline void mx53_smd_ahci_pwr_on(void)
+{
+	int ret;
+
+	/* Enable SATA PWR */
+	ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
+			GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
+	if (ret) {
+		pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
+		return;
+	}
+}
+
 static void __init mx53_smd_board_init(void)
 {
 	imx53_soc_init();
@@ -125,6 +139,8 @@ static void __init mx53_smd_board_init(void)
 	imx53_add_sdhci_esdhc_imx(0, NULL);
 	imx53_add_sdhci_esdhc_imx(1, NULL);
 	imx53_add_sdhci_esdhc_imx(2, NULL);
+	mx53_smd_ahci_pwr_on();
+	imx53_add_ahci_imx();
 }
 
 static void __init mx53_smd_timer_init(void)
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 3fcb596..5955ca3 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -271,7 +271,11 @@ static int _clk_pll_enable(struct clk *clk)
 	int i = 0;
 
 	pllbase = _get_pll_base(clk);
-	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	if (reg & MXC_PLL_DP_CTL_UPEN)
+		return 0;
+
+	reg |= MXC_PLL_DP_CTL_UPEN;
 	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
 
 	/* Wait for lock */
@@ -1397,6 +1401,22 @@ static struct clk esdhc4_mx53_clk = {
 	.secondary = &esdhc4_ipg_clk,
 };
 
+static struct clk sata_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_max_enable,
+	.enable_reg = MXC_CCM_CCGR4,
+	.enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
+	.disable = _clk_max_disable,
+};
+
+static struct clk ahci_phy_clk = {
+	.parent = &usb_phy1_clk,
+};
+
+static struct clk ahci_dma_clk = {
+	.parent = &ahb_clk,
+};
+
 DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
@@ -1509,6 +1529,9 @@ static struct clk_lookup mx53_lookups[] = {
 	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
 	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
 	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
 };
 
 static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index 7ca5d0c..7fe5e46 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -44,3 +44,4 @@ extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
 extern const struct imx_pata_imx_data imx53_pata_imx_data;
 #define imx53_add_pata_imx() \
 	imx_add_pata_imx(&imx53_pata_imx_data)
+extern struct platform_device *__init imx53_add_ahci_imx(void);
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 31c152e..0d738fd 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -186,7 +186,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 
 	mdelay(10);
 
-	return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD);
+	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
 static struct mxc_usbh_platform_data usbh1_config = {